kaynak makineleri kullanılmış satılık (1,632)

Tablo uzunluğu: 1200 mmTablo genişliği: 800 mm Tabla yüksekliği: 980 mm: Makinenin kgağırlığı yaklaşık 0.95 tİş istasyonu- Delik çapı: 28 mm- Izgara: 100 x 100 mm- Yan paneller: 150 mm- Panel kalınlığı: 10 mm Bu reklamın verileri, LogoTech oHG'nin yazılım çözümü olan ModulMWS ile oluşturulmuştur.

sayı: 93 Pozisyon ağırlık: 320 kgDurum: neu: 28 mmBoyutlar: 1,0 x 0,6 x 0,85 mÖzel 93 parçalı set, 28mm sistemAraç arabası dahilMalzeme: Parlatılmış yüksek kaliteli çelikTeslimat kapsamı: görsellere bakınızBu reklamın verileri LogoTech oHG'nin yazılım çözümü olan ModulMWS ile oluşturulmuştur.

sayı: 102 Pozisyon ağırlığı: 320 kgDurum: neu: 28 mm boyutlar: 1,0 x 0,6 x 0,85 mÖzel 102 parçalı set, 28mm sistemAraç arabası dahilMalzeme: Parlatılmış yüksek kaliteli çelikTeslimat kapsamı: görsellere bakınızBu reklamın verileri LogoTech oHG'nin yazılım çözümü ModulMWS ile oluşturulmuştur.

sayı: 80 Pozisyon ağırlığı: 150 kgDurum: Neu : 28 mm Boyutlar: 0,8 x 0,6 x ,05 mÖzel 80 parçalı set, 28mm sistemMalzeme: Parlatılmış yüksek kaliteli çelikTeslimat kapsamı: görsellere bakınızBu reklamın verileri, LogoTech oHG'nin yazılım çözümü olan ModulMWS ile oluşturulmuştur.

sayı: 10 Stk.kelepçe menzili: 25 mm: 28 mm ağırlık: 10 kgBoyutlar: 0,3 x 0,3 x 0,2 m10 Hızlı açılan kelepçe cıvataları - 28mm delik sistemi - 25mm tablo kalınlığı içinBu reklamın verileri, LogoTech oHG'nin yazılım çözümü olan ModulMWS ile oluşturulmuştur.

table length: 2400 mmtable width: 1200 mmtable height: 200 mmbore: 28 mm: 100 x 100 mmmaterial thickness: ca. 24,5 - 27 mm: 200 mmwork height max.: 850 mmWeight: 980 kg Special item - The drill pattern on all side rails is offset downwards by approx. 1 mm. The clamping dimension for angle or table-to-table connection is not specified. >.- high-quality steel S355J2+N + plasma nitriding- Drill holes in side panel in diagonal grid- Corners, edges and drill holes bevelled 45- Construction reinforced by ribs- incl. base basic equipment 650 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mmtable width: 1200 mmtable height: 200 mmbore: 28 mm: 100 x 100 mmmaterial thickness: ca. 24,5 - 27 mm: 200 mmwork height max.: 850 mmWeight: 980 kg Special item - The drill pattern on all side rails is offset downwards by approx. 1 mm. The clamping dimension for angle or table-to-table connection is not specified. >.- high-quality steel S355J2+N + plasma nitriding- Drill holes in side panel in diagonal grid- Corners, edges and drill holes bevelled 45- Construction reinforced by ribs- incl. base basic equipment 650 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mmtable width: 1200 mmtable height: 200 mmbore: 28 mm: 100 x 100 mmmaterial thickness: ca. 24,5 - 27 mm: 200 mmwork height max.: 850 mmWeight: 980 kg Special item - The drill pattern on all side rails is offset downwards by approx. 1 mm. The clamping dimension for angle or table-to-table connection is not specified. >.- high-quality steel S355J2+N + plasma nitriding- Drill holes in side panel in diagonal grid- Corners, edges and drill holes bevelled 45- Construction reinforced by ribs- incl. base basic equipment 650 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mmtable width: 1200 mmtable height: 200 mmbore: 28 mm: 100 x 100 mmmaterial thickness: ca. 24,5 - 27 mm: 200 mmwork height max.: 850 mmWeight: 980 kg Special item - The drill pattern on all side rails is offset downwards by approx. 1 mm. The clamping dimension for angle or table-to-table connection is not specified. >.- high-quality steel S355J2+N + plasma nitriding- Drill holes in side panel in diagonal grid- Corners, edges and drill holes bevelled 45- Construction reinforced by ribs- incl. base basic equipment 650 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

kaynak gücü: 40 - 350 / 12 - 40 A/Vopen devre gerilim: max. 56 Vvoltaj: kaynak akımı: %100: 300 Tel hızı: 0 - 24 m/mina kapasite: 15,9 kVA Voltaj: 3 ~ 400 Vfrekans: 50 Hz Soğutma sıvısı:: F Koruma sınıfı: IP 23 makinenin ağırlığı ca.: 153 + 22 kgMakinenin boyutları ca.: 1,10 x 0,60 x 1,15 mKaynak makinesiCLOOS - GLC 353 MC 3- dahil. Tel Sürücü Birimi CLOOS - CK98 Bu reklamın verileri, LogoTech oHG'nin yazılım çözümü olan ModulMWS ile oluşturulmuştur.

current intensivity: 140 Aplate thickness: 1,5 mmwelding range: CO2: 35 - 225 Awelding range: 30Ar+CO2: 30 - 250 Aweight of the machine ca.: ca. 90 Kgdimensions of the machine ca.: 0,4 x 0,8 x 0,8 mCondition: ready for operation: Electric 380 Volt: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

working area: 500x300 mmwork height max.: 100 mmWeight: 120 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Special Item: Messeeinsatz table length: 3000 mmtable width: 1500 mmtable height: 200 mmbore: 28 mmmaterial thickness: ca. 24,5 - 27 mm: 200 mmweight: ca. 1.400 kgTrade Fair TABLESlight signs of wear on the surfaceWelding table:- 6 legs - basic equipment 650 mm- Through-hardened tool steel X8.7 + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Side cheek made of high-quality steel S355J2+N + plasma nitriding- Bore Ø 28 mm- Drilled holes Surface in diagonal grid- Corners, edges and drill holes rounded- Side panel height 200 mm- Side panel holes in diagonal grid- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise superstructuresThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore: 16 mmweight: 24 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore: 16 mmweight: 41 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore: 16 mmweight: 86 kg4-163400Consisting of:- 10x Professional screw clamp, burnished/nitrided- 4x Professional screw clamp 45°/90°, burnished- 8x Vario Prisma Ø 50 90°/120° with screwed-in collar, nitrided- 30x quick-release bolts without groove, double burnished- 8x universal stop 80 L, nitrided- 10x universal stop 115 L, nitrided- 10x stop and clamping angle 90 X, nitrided- 10x stop and clamping angle 90 L, nitrided- 4x stop and clamping angle 300 G, nitrided- 1x set of stop and clamping angles 250 G with rotating angle, nitrided- 1x set of stop and clamping angles 500 GK, nitrided- 1x tool trolley, powder-coated- 1x accessory setThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore: 16 mmweight: 109 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mmtable width: 1200 mmtable height: 200 mmbore: 28 mmweight: 918 kgEquipment:- 4 feet - basic equipment 650 mm- high-quality steel S355J2+N + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Hole Ø 28 mm- Drill holes surface 100x100 mm grid- Corners, edges and drill holes rounded- Side panel height 200 mm- Hole spacing side panel 50 mm- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise superstructuresThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Çap: 16 mm ağırlık: 13 kgBu reklamın verisi, LogoTech oHG'nin yazılım çözümü olan ModulMWS ile oluşturuldu.

bore: 22 mmweight: 92 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1500 mmtable width: 1000 mmtable height: 200 mmbore: 28 mmweight: 913 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1000 mmtable width: 1000 mmtable height: 150 mmbore: 22 mmweight: 300 kgEquipment:- 4 feet - basic equipment 650 mm- high-quality steel S355J2+N + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Hole Ø 28 mm- Drill holes surface 100x100 mm grid- Corners, edges and drill holes rounded- Side panel height 200 mm- Hole spacing side panel 50 mm- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise superstructuresThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1500 mmtable width: 1000 mmtable height: 150 mmbore: 22 mmweight: 420 kgEquipment:- 4 feet - basic equipment 650 mm- high-quality steel S355J2+N + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Hole Ø 28 mm- Drill holes surface 100x100 mm grid- Corners, edges and drill holes rounded- Side panel height 200 mm- Hole spacing side panel 50 mm- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise superstructuresThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1500 mmtable width: 1500 mmtable height: 150 mmbore: 22 mmweight: 585 kgEquipment:- 4 feet - basic equipment 650 mm- high-quality steel S355J2+N + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Hole Ø 28 mm- Drill holes surface 100x100 mm grid- Corners, edges and drill holes rounded- Side panel height 200 mm- Hole spacing side panel 50 mm- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise superstructuresThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2000 mmtable width: 1000 mmtable height: 200 mmbore: 28 mmweight: 730 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1200 mmtable width: 800 mmtable height: 200 mmbore: 28 mmweight: 408 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1200 mmtable width: 1200 mmtable height: 200 mmbore: 28 mmweight: 544 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2000 mmtable width: 2000 mmtable height: 200 mmbore: 28 mmweight: 1299 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.