kaynak makineleri kullanılmış satılık (1,659)

Kaynak: TruPulse 124 Lazer ışığın dalga boyu:1064 nm Maksimum ortalama güç: 140 W Minimum darbe çıkışı: 300 W Maksimum darbe gücü: 6 kW Minimum darbe süresi: 0.3 ms Maksimum darbe süresi: 50 ms Maksimum nabız enerjisi: 30 yıl Maksimum darbe tekrarlama hızı:833 Hz Işin parametre çarpımı: 16 mm-mradX-ekseni:450 mm Hız: 3000 mm/dakika Konumlandırma doğruluğu:± 0,05 mm Tekrarlanabilirlik:± 0.02 mm mm eksen:300 mm Hız: 3000 mm/dakika Konumlandırma doğruluğu:± 0,1 mm Tekrarlanabilirlik:± 0.02 mm Z ekseni: 300 mm Hız: 3000 mm/dakika Konumlandırma doğruluğu:± 0,05 mm Tekrarlanabilirlik:± 0.02 mm Döner eksen Pikap: 120 mm Serbest iç çap: 45 mm Maksimum hız: 80 rpm. Üç çeneli çakmanın çapı:80 mm Merkezi geçitler: 16 mm sıkıştırma menzili, iç kısımlar: 2-71 mm Dı ...

: neu : ca. 6-8 Wochen ab Auftrag : Polen : 16980 €: 326.02 €: 1 : 66 mm: 60 °: 300-800 U/min: 0 - 1,2 mm/min: 6 mm: 6.5 kW: 1179 mm: 853 mm: 1524 mm: 320 kgportable auto-feed bevelling machinereal time measurement and on-screen displaydouble-sided bevellingvariable spindle speedmilling head including 8 replaceable insertsremote control panel with LCD display max. bevel width: 66 mm at 15°52 mm at 30°50 mm at 45°51 mm at 60°The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 2 - 4 Wochen ab Auftr : 995 €: 1200 x 800 mm: 150 kg: 16 mmTHIS MODEL IS DESIGNED FOR BEGINNERS AND FOR PROCESSING LIGHTER AND SMALLER WORKPIECES.Our tables are characterised by the high degree of hardness with our Cr75M+ hard chrome plating, the very high degree of accuracy of +/- 0.05 mm on the entire table surface and the tolerances of the hole diameters of the entire hole pattern.2D standard welding and clamping table,1200 x 1200 with Cr75M+ hard chrome platingTable system: 16 mmMaterial thickness: 12 mmIncluding table substructure and standard table legs S355J2+N with Cr75M+ hard chrome plating Hole: 16 mm, material thickness: 12 mm Including coated table substructure Table top with 2-sided fine scaling and 50 x 50 mm grid line Rounded edges and holes Solid standard table legs with load capacity 1 tonne per leg, 500 kg per leg for castor modelThe data for this ad ...

: neu : ca. 2 - 4 Wochen ab Auftr : 6400 €: 123.52 €: 3000 x 1500 mm: 850 mm: 8000 kg: 1544 kg: 200 mm: 28 mm- Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes- Hard chrome-plated table surface Cr75The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market.- Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers)- Grid lines 100 x 100 mm- 4 solid table feet withload capacity 2 ton/feet and levelling option- Different foot variants available (stand ...

: neu : ca. 3-6 Wochen ab Auftrag : Türkei : 5010 €: 96.69 €: 100 kg: 150 mm: 150 mm: 360 °: 120 kgm: 230 / 50 V / Hz: 0.25 kW: 0.25 kW: 0.1 - 3 U/min: 30 s: 350 mm: M12x6 mm: 690 mmThe positioners are available in standard sizes for load capacities from 150 kg to 3,000 kg.The frame is optimally designed for rotation and tilting operations.The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected.For heavy workpieces, the positioners are mounted on the floor.The tables have radial T-slots that enable quick clamping of the workpieces.Tilting and rotation are controlled by steel gears.For safety, the positioner is equipped with a reduction gear that holds the table in the desired position.Foot pedalCable for signal to welderTouchpanel for following functions:- rotation speed- operating modi (manual, seg ...

: neu : ca. 3-6 Wochen ab Auftrag : Türkei : 7730 €: 149.19 €: 500 kg: 150 mm: 150 mm: 360 kgm: 230 / 50 V / Hz: 0.37 kW: 0.37 kW: 0.1 - 3 U/min: 45 s: 800 mm: M20X6 mm: 640 mmThe positioners are available in standard sizes for load capacities from 150 kg to 3,000 kg.The frame is optimally designed for rotation and tilting operations.The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected.For heavy workpieces, the positioners are mounted on the floor.The tables have radial T-slots that enable quick clamping of the workpieces.Tilting and rotation are controlled by steel gears.For safety, the positioner is equipped with a reduction gear that holds the table in the desired position.Foot pedalCable for signal to welderTouchpanel for following functions:- rotation speed- operating modi (manual, segmentcyc ...

: neu : 2486 : prompt, Zwischenverkauf v : 545 €: 1 : 28 mmTools are not included in the price.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 2 - 4 Wochen ab Auftr : 929 €: 16 mmStarter set for anyone who wants to work professionally and efficiently contains the most important tools as basic equipment.Consisting of:4 pieces screw clamp 180° HIS16Z30004 pieces stop bracket 90x37.5mm HIS16WA90374 pieces stop bracket 90x90mm HIS16WA90904 pieces stop bar 115mm HIS16FA11512 pieces quick clamping bolt short HIS16SB1001 piece cleaning brush HIS16RB1 piece torch holder HIS16BH1 piece cleaner HIS-Cleaner-1L1 piece anti-adhesive agent HIS-Premium-1LOPTION:Tool trolley HIS16WW1000 € 449,--The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Auction-ID: A1-45411-106

Unused machine, tiltable, Auction-ID: A1-45188-12

At a height of approximately 180cm on the platform Auction-ID: A1-44726-32

Equipped with hose package, pressure reducing valves, fire extinguisher and various roasting parts Auction-ID: A1-44726-20

Auction-ID: A1-45239-2144

Still need to be disassembled, excluding pipes and suspension system Auction-ID: A1-44726-133

Auction-ID: A1-45188-220

table length: 3000 mmtable width: 1500 mmtable height: 200 mmbore: 28 mm Special item: Hardness not achieved and a blemish on the surface Specifications:- High-quality S355J2+N steel + plasma nitriding- Material thickness approx. 24.5–27 mm- Hole diameter 28 mm- Surface hole pattern 100x100 mm grid- Corners, edges, and holes rounded- Side panel height 200 mm- Hole spacing on side panel 50 mm- Includes scale markings on the surface- Construction reinforced with ribs- Grid lines enable precise setups- 6 feet - Standard configuration 650 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Auction-ID: A1-44726-102

Portable, torch and ground cable not included. Auction-ID: A1-45188-107

: neu : ca. 2 Wochen ab Auftragse : 5442 €: 105.03 €: 28 mmAccessory set consisting of:14 pcs. screw clamp180° HIS28Z30008 pcs. screw clamp45° HIS28Z30456 pcs. V-support HIS28VP10030 pcs. quick clamping bolt shortHIS28SB1006 pcs. connection bolt HIS28BS1004 pcs. mangnetic bolt HIS28MB1008 pcs. stop rail 150mm HIS28FA1508 pcs. stop rail 225mm HIS28FA2252 pcs. stop rail 500mm HIS28FA5006 pcs. stop angle 175mm HIS28WA1751 pc. stop angle 325mm HIS28WA325L1 pc. stop angle 325mm HIS28WA325R1 pc. support angle 600mm HIS28W600L1 pc. support angle 600mm HIS28W600R1 pc. support angle 800mm HIS28W800L1 pc. support angle 800mm HIS28W800R1 pc. cleaning brush Nylon HIS28RB1 pc. torch holder HIS28BH1 pc. tool cart HIS28WW1000and 1 care set (consisting of 1 pc. HIS-Cleaner-1L and HIS-Premium-1L)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight of the machine ca.:150 kgdimensions of the machine ca.:1200 x 600 x 800 mm

Auction-ID: A1-45239-2090

Box size 475x325x350mm; Mig 50A/16.5V-200A/24V; MMA 20A/20.8V-200A/28V; TIG 20A/10.8V-200A/18V; 7672 Auction-ID: A1-45506-337

Auction-ID: A1-45188-118

Box size 500x325x350mm; rated input current A MIG; 35/MMA; 38/TIG28; Rated input capacitance KVA MIG; 8.05/MMA; 8.74/TIG; 6,44; Auction-ID: A1-45506-336

Consisting of 1x Kemper extraction arm with extraction motor (wall mounted at approximately 3.5 meters height), including 1x spray table (2.2x0.9x0.85 meters) Auction-ID: A1-44726-18

Auction-ID: A1-44726-56

Auction-ID: A1-44726-16

: gebraucht : 2468D : prompt, Zwischenverkauf v : Deutschland : 2970 €: 1 : 1890 €: 195 kg: 28 mmDEMO SET / MINT CONDITIONconsisting of: 1x accessories car (Delivery is galvanised) 4x angle stop 350 x 20 mm 4x adjustable angle stop 250 x 20 mm 15x Adjustment clamp 4x Multi-clamp 6x Stand angle, adjustable 175 x 20 mm 2x Stand angle, adjustable 225 x 21 mm 8x Stop rail 225 x 20 mm 10x Socket bolt 15x Plug holder 3x Ball Tension Bolt 4x Claw clamping bolt 28 x 100 mm 15x Spacer ringThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Auction-ID: A1-45188-110

with LF24 wire feed, with various accessories Auction-ID: A1-45411-118