delik işleme değirmenleri işleme merkezleri kullanılmış satılık (577)

Maksimum İşleme Ölçüleri : 3200x1190x70 mm Min İşleme Boyutları : 200x70x8 mm Delme kafası 15 mil, X yönünde testere ünitesi içerir Lineer takım değiştiriciler 6

Dikey bağımsız iğ sayısı: 9 X eksenindeki yatay iş mili sayısı : (2+2) Y eksenindeki yatay iş mili sayısı: (1+1) N 1 testere bıçağı ünitesi: (ø 100 mm) Yönlendirici kafası 3,6 Kw ISO 30 - 12000/24000 rpm Panelin kalınlığı: 50 mm Kontrol: Tam Parametrik Panelin maksimum ağırlığı: Kg 25 Maksimum panel boyutu: X, Y 1100, Z 50 mm Minimum panel boyutu: X 270,Y 150 (70 op.), Z 12mm Kontrollü eksen sayısı: 3 Panel besleme hızı: 25m / dak İş mili hız dönüşü: 3600 rpm Testere bıçağı hız dönüşü: 7000 rpm Hava basıncı: 7 bar Toz emme çapı: ø 140 mm Egzoz havası konstrüksiyonu: (2000 mc/ora) - (30 m/s) Horiz'de maksimum sondaj derinliği. X ve Y ekseninde: 30 mm Dikey olarak maksimum delme derinliği: 45 mm Aletlerin maksimum yatay çapı: 12 mm Aletlerin maksimum dikey çapı: 35 mm Motor Gücü: 1,5 kw Maksimum hava tü ...

Makine Boyutu 2800 x 1940 x 2000mm Min. İşlenmiş panelin boyutu 200 x 35 x 8mm İşlenmiş panelin maksimum boyutu 3200 x 900 x 60mm

Çalışma alanı 2500x900x70 mm Yazılım BIESSEWORKS Makine kontrolü PC kontrolü Dönüş hızı maksimum rpm 18000 Yatay İş Mili Sayısı 10 Kanal açma mili ile

Bu 3 eksenli BIESSE Skipper v31 2014 yılında üretilmiştir. Ana mil hızı 15.000 rpm'ye sahip güçlü 12 kW bir makineye sahiptir. Makine, 16 sondaj miliyle (6 yatay ve 10 diki) ve bir delik bıçağı ile donatılmıştır; bu da çok yönlü delme ve frezeleme yetenekleri sağlar. Yüksek kaliteli ahşap delme özellikleri arıyorsanız, satışımızda olan BIESSE Skipper v31 makinesini düşünün. Daha fazla bilgi için bizimle iletişime geçin.

C.M.S. CNC Taret Kafası İşleme Merkezi Model TRIAX R-65 Sn 285, 1986 IBH kontrolör modus 1 (2) vakum masaları - her biri 48 "derin x 60" uzunluğunda. (1) beş istasyonlu torna bölümü. Maks.part 6,5" x 45" (2) vakum pompaları 5 hp. her biri. Toplam (30) yönlendirici. (6) istasyon tareti ve istasyon başına (5) yönlendirici. Oluşan; (2) her biri (5) yönlendirici istasyonu - 2 1/2 hp. her biri. (4) her biri (5) yönlendiriciden oluşan istasyonlar – her biri 8 hp. Düz çalışma veya oyma için masayı dijitalleştirme. İş mili işi için torna bölümü (oluk, oyma). Ünite ekstra parçalar ve çok sayıda aletle tamamlanmıştır.

- Drill head for 21 drill bits (a chuck is MISSING). - Distance between drill bits: 32 mm. - Distance between first and last mandrel 640 mm. - Dimensions of the work table approx. 800 x 500 mm. - Maximum drilling depth 70 mm. - Head rotation: 0° - 90°. - Engine 1.84 KW-2800 rpm. - Pedal actuation. - VITAP revolver for 6 different pre-selected depths. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-47169-55

Type: CNC universal machining center Manufacturer: Mikron Model: UCP 1000 Control: Heidenhain TNC 426 Year: 1999 Machine number: 7128 Machine concept: 5-axis universal machining center with rotary table Table type: Circular rotary table Spindle orientation: Horizontal / swivelling head Tool changer: Automatic tool changer integrated Voltage: 400 V Frequency: 50 Hz Main fuse rating: 100 A Connected load: 40 kW Control voltage: 24 VDC Noise level: 75 dB(A) Handling crane not included; pack of tools included - as shown in the photo Auction-ID: A7-45993-173

- Total installed power 31.50 KW. - Usable working area approx. 2910 x 1310 mm. - Passage height on panel 200 mm. - X-axis travel: 3100 mm, y-axis travel: 1750 mm, z-axis travel: 300 mm. - Programmable maximum speed in x-y-z directions: 25-25-15 m/min. - Tool magazine with 8 positions. - HSD ES919 electrospindle: 8KW-max power. 24000 rpm, automatic tool change, for ISO 30 tool holders. - Grooving saw group. - ISAC SAB 2001 E numerical control. - Windows software. - 6 benches. - 4 lifting modules for heavy parts. - 1 x BECKER U 4.165 SA/K vacuum pump with a capacity of 160 m³/h. - 1 x BECKER KVT 3.140 vacuum pump with a capacity of 132 m³/h. - 1 x PUSKA air tank, capacity 150 litres. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-I ...

- Drilling head for 21 drill bits. - Distance between drill bits: 32 mm. - Distance between first and last mandrel 640 mm. - Dimensions of the work table approx. 800 x 500 mm. - Maximum drilling depth 70 mm. - Head rotation: 0° - 90°. - Engine 1.84 KW-2800 rpm. - Pedal actuation. - VITAP revolver for 6 different pre-selected depths. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-47169-5

- Mobile bridge. - Total installed power approx. 40 KW. - Dimensions of the work table approx. 3600 x 1500 mm. - Tool magazine with 10 positions. - Electrospindle: power 8.50 KW, automatic tool change, for HSK F63 tool holder. - Saw group for grooving in the direction of the X-axis. - Vertical holes in the x-axis direction: 9. - Vertical holes in the y-axis direction: 5. - Horizontal holes in the x-axis direction: 1 + 0. - Horizontal holes in the y-axis direction: 1 + 1. - Remote control panel. - 8 suction cups are included. - 2 x BECKER VTLF 2.250/0 vacuum pumps with a capacity of 244 m³/h each. - Cutting tools and accessories are included. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-47169-51

- Total installed power 8 KW. - 1 x horizontal drilling head with 20 chucks, 32 mm pitch, 2.20KW-2800 rpm motor. - 2 x vertical drilling heads with 20 chucks each, pitch 32 mm, motor 2.20KW-2800 rpm. - Pedal actuation. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-47169-102

HURCO BMC 20 / BMC 20P CNC Vertical Machining Centre Type: CNC vertical machining centre Manufacturer: Hurco Model: BMC 20 Control: GSK CNC Axes: 3-axis Machine configuration: Vertical spindle machining centre Table size: approx. 760 x 350 mm X-axis travel: approx. 560–610 mm Y-axis travel: approx. 355 mm Z-axis travel: approx. 355–406 mm Spindle taper: SK40 Spindle speed: approx. 60–6000 rpm Spindle motor power: approx. 7.5 kW / 10 HP Tool changer: 16-position automatic tool changer, Maximum table load: approx. 250 kg / 550 lbs Voltage: 3-phase Frequency: 50–60 Hz Machine dimensions: approx. 2,200 x 2,250 x 2,250 mm Machine weight: approx. 2,500–2,850 kg Condition: Used Functionality: Powered on; spindle and machine movement observed in video; full functionality Description This Hurco BMC 20 / BMC 20P is a CNC vertical machining centre suitable for milling, drilling, tapping ...

- Mobile bridge. - Total installed power 45 KW. - Usable working area approx. 5000 x 1500 mm. - Maximum travel speed 55 m/min. - Tool magazine with 12 positions. - Electrospindle: power 9 KW-max. 18000 rpm, automatic tool change, for HSK F63 tool holders. - Saw group for grooving in the direction of the X-axis. - Vertical holes in the x-axis direction: 6. - Vertical holes in the y-axis direction: 4. - Horizontal holes in the x-axis direction: 2 + 2. - Horizontal holes in the y-axis direction: 1 + 1. - Chip collection system. - TPA numerical control. - Remote control panel. - 10 benches with 38 suction cups in total. - HARNNETT 250G vacuum pump with a capacity of 250 m³/h. - Cutting tools and accessories are included. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are spec ...

High-end NAKAMURA-TOME WTS-150M3Y2 CNC turning center, equipped with 3 turrets, two main spindles, and Y and C axes, allowing the complete machining of complex parts in a single take. Machine for series production with automation. Equipped with an LNS Quick Load Servo II bar feeder and a Kowap filtration system. 2 spindles (simultaneous machining) 3 turrets (12 stations each) C-Axis Y-axis Driven tools (up to 6000 rpm) Bar passage: 51 mm left spindle 42 mm Straight Pin X-axis: 207.5 mm Z-axis: 300 mm Z-axis (straight spindle): 800 mm CNC : FANUC 16i-TA Feeder: LNS Quick Load Servo II Filtration system: Kowap Chip conveyor Lubrication system Pin synchronization Machine prepared for robotic automation (integrated robot door) Auction-ID: A1-47143-2

Auction-ID: A7-47288-278

Brand: DOOSANModel: Z290SMYYear of manufacture: 2002CNC Control Fanuc Series 18-TMultitasking CNC lathe with Y axisDouble spindle (Main/Sub Spindle)Motorized turretChip conveyor includedInstalled power: 60 kVAWeight: 5,000 kgVoltage: 200/220 VFrequency: 50/60 HzUntested status and operationSold according to visible state in the photographs Auction-ID: A7-47333-23

Max. workpiece dimensions 1300x550x680 mm, 5x T-slot at a distance of 100 mm, rapid traverse X/Y-axis 26 m/min, rapid traverse Z-axis 20 m/min, feed X/Y/Z axis 8m/min, max. tool weight 20 kg, max. tool length 400 mm, tool change time 5.5 s Auction-ID: A1-47475-2

- Total installed power 20 KW. - Minimum workpiece length approx. 250 mm. - Maximum workpiece height approx. 1000 mm. - Maximum workpiece thickness approx. 60 mm. - Maximum feed speed 96 m/min. - Input transfer of approximate length 2000 mm. - Fixed upper input group: 15 horizontal holes, milling unit for grooving in the longitudinal direction (1.70 KW motor). - Fixed lower input group: 15 horizontal holes, 3 horizontal hinge holes, horizontal milling head (5.60 KW-18000 rpm motor). - Mobile upper output group: 15 horizontal holes, (3+3) horizontal holes for side ends, 2 vertical holes for upper ends. - Mobile lower output group: 15 horizontal holes, 3 horizontal hinge holes, (3+3) horizontal holes for side ends. - Output transfer of approximate length 2000 mm. - OSAI numerical control. - Operating conditions of this machine: unchecked. - Dimensions for transport approx. 13 ...

CNC Control: CNC 3-axisDowndraft table: 2000 × 3000 mmSuction zones: 8 zones divisible in two (8 valves)Vacuum network: new (pipes, fittings, manifold)Software: GALAAD (user manual supplied)Location of the batch: department 71 (Saône-et-Loire) Auction-ID: A1-47472-9

• Total installed power 14 KW. • Working area approx. 2700 x 950 mm. • Passage height on panel 60 mm. • Programmable maximum speed in x-y-z directions: 75-75-15 m/min. • Vertical milling unit, 5.50 KW-max motor. 24000 rpm, manual tool change, ISO 30 connection. • Saw group for grooving in the direction of the X-axis. • Vertical holes in the x-axis direction: 8. • Vertical holes in the y-axis direction: 5. • Horizontal holes in the x-axis direction: 2 + 2. • Horizontal holes in the y-axis direction: 1 + 1. • 6 benches with 2 suction cups each. • NO vacuum pump. • The tools that appear in the photographs are NOT included. • IMPORTANT: This machine does not work. It gives an error when loading the operating system. Ideal for spare parts. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of disma ...

1 milling spindle -> 4 steered axes Drilling unit: 6 horizontal drill spindles 18 vertical drill spindles Vacuum pump 2 pieces: Becker 2023 18.5kw Capacity [m³/h] 600 Vacuum [bar] 250 Tool changer positions: 12pcs Safety feature: Safety mat Fence USB stick available Auction-ID: A1-40977-6

Main motor power: 10kW Number of steered axles: 3pcs Working range X: 974.5mm Working range Y: 1320.75mm Working range Z: 242.95mm 1 milling spindle Tool holder mount: ISO30 Spindle diameter: 16mm Min. spindle speed: 1000 rpm Max. spindle speed: 18000 rpm Horizontal drilling unit Vertical drilling unit Software: Biesse Works Sawing unit 10 horizontal drill spindles Auction-ID: A1-40977-5

Power: 1kW 16A 3 spindles Auction-ID: A1-40977-98

Documentation available CE marking available CE certificate available Incl. tools, camera height, laser, USD software plas for maestro 12 milling spindles Drilling unit Sawing unit Tool changer positions: 8pcs X-axis maximum stroke: 3120mm Y-axis maximum stroke: 1685mm Z-axis maximum stroke: 250mm Auction-ID: A1-40977-8

- Total installed power approx. 22 KW. - Dimensions of the work table approx. 2800 x 900 mm. - Passage height on panel 65 mm. - X-axis travel: 3400 mm, y-axis travel: 1350 mm, z-axis travel: 100 mm. - Maximum travel speed in x-y-z directions: 70-60-15m/min. - Tool magazine with 7 positions. - HSD ES919 electrospindle: power 8 KW-max. 20000 rpm, automatic tool change, for ISO 30 tool holders. - Vertical holes in the x-axis direction: 10. - Vertical holes in the y-axis direction: 5. - Horizontal holes in the x-axis direction: 1 + 1. - FAGOR numerical control. - 6 benches with 10 suction cups in total. - BECKER VT 3.40 vacuum pump with a capacity of 40 m³/h. - The tools that appear in the photographs are NOT included. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified ...

Tool clamping system: HSK-F63 Tool changer positions: 12pcs Drilling unit available Sawing unit available Vacuum pump available Tools included X-axis maximum stroke: 4000mm Y-axis maximum stroke: 1670mm Z-axis maximum stroke: 500mm Drilling unit: Horizontal drill spindles: 4pcs Vertical drill spindles: 12pcs Power: 18kW Auction-ID: A1-40977-3

Main motor power: 0.75kW Drills included Tool keys included Auction-ID: A1-40977-82

Tool changer positions [pcs.] 25 Vacuum pump available Barcode reader Discharge belt leftovers 1 milling spindle > 5 steered axes 10 horizontal drill spindles 24 vertical drill spindles Auction-ID: A1-40977-7

Pinnacle LV-126 CNC Vertical Machining Center. Year of manufacture: 2008. Equipped with Fagor 8055i PLUS-M CNC control and 24-position automatic tool changer. Technical Specifications: • Travels (X/Y/Z): 1300 x 610 x 610 mm • Table dimensions: 1440 x 610 mm • Maximum spindle speed: 8,000 rpm • Taper: ISO 40 • Automatic tool changer: 24 positions • Maximum tool weight: 8 kg • 45 mm Class P precision linear guides • Ball screws Ø40 mm, C3 accuracy grade • Number of axles: 3 • Machine weight: 6,800 kg Suitable for precision machining and general metal transformation work. Sold in the \"as is\" condition and without subsequent warranties. Include accessories visible in the photographs. Auction-ID: A7-47240-1