delik işleme değirmenleri işleme merkezleri kullanılmış satılık (563)

Üretici: Priess und Horstmann, Tip: BAT-III-CNC, Yıl: 1996, Kontrol: B&R + PC, Çevrimiçi bağlantı: möglich, İşleme istasyonları: 2, İş parçası genişliği min-maks mm: 190-600, İş parçası uzunluğu min-maks mm: 100-1350, İş parçası kalınlığı min-maks mm: 16-35, 3 Achsensteuerung: 3, Vertikale Bohrstationen von unten: 2, Bandbohrung: evet, Pufferbohren und setzen: evet, Grifflöcher: evet, Sonderbohrung Fläche: evet, Otomatik kurulum: evet, Alttan delme desteği: 2, Delme yatay destekler: 1, Genel delme kafaları: 3, Beschlagstation: evet, Yıl: 1996

Manufacturer: HomagTürenfertigung mit mit Verleimteil und KUKA Roboter, Type: BOF / BAZ20/50/18/2/D, Year: 2002, Control: Homatic PC 83, Software: Woodwop, Work piece width min-max mm: 1600, Min.-max. workpiece length in mm: 800 - 3500, Min.-max. workpiece height in mm: 12 - 60/120, Working range X: 5800, Working range Y-axis: 1600, Working range Z: 160, C axis: 2, Work piece width min-max mm: 1600, Min.-max. workpiece length in mm: 800 - 3500, Min.-max. workpiece height in mm: 12 - 60/120, Number of milling spindles vertical: 2, Tool adaption system: HSK F63, Milling engine 1 hours power: 14,5, rpm 1): 1500 - 18.000, Milling engine 2 hours power: 14,5, rpm 2): 1500 - 18.000, Kettenwechsler: 70, Pickup Wechlser: 6, Number of tools per tool-magazine: 6 + 70+ 20, Mitfahrender Werkzeugwechsler: yes, Belt conveyor: yes, 2 station allocation: yes, Vacuum pumps m³/h: 2 x 66, Rigging sup ...

Manufacturer: Priess und Horstmann, Type: BAT-RTW-CNC, Year: 2003, Control: NST Panel PC W2k, Software: Ferro CAN Bus, Online connection: möglich, Machining stations: 4, Work piece width min-max mm: 130 - 600, Work piece length min-max mm: 290 - 1.300, Work piece thickness min-max mm: 16 - 25, 3 axis control: yes, Destacking unit: yes, Robot charging: yes, Beschickungsband: yes, Vertical drilling station from below: 2, Belt bores: yes, Drill and set buffer: yes, Grip holes: yes, Special bore area: yes, Automatic setting up: yes, Fitting station: yes, Transmission station: yes, Hordenwagen Aufstapelstation: yes, Automatic feed of the: yes, Line boring units pcs: 2, Line screw running units: yes, Year :2003

Manufacturer: Priess und Horstmann, Type: BAT III, Year: 1995, Control: Priess und Horstmann, Program: yes, Funktion: Frontenbohrmaschine, Work piece width min-max mm: 150-600, Min.-max. workpiece length in mm: 150-1300, Min.-max. workpiece height in mm: 10-45, One or two Spot machine: 2, Working stations: 2, Feeding speed max m/min: 80, Fitting type: Blum, Set buffer: yes, Working range X: 21300, Working range Y-axis: 2600, Working range Z: 60, Vertical drills-X: 2, Drill vertical Y: 15, Horizontal drills-X: no, Drill gearings: 3, Drilling supprt from bottom: 2, Drill gearings: 3, Drill support from top: 1, Drill gearings: 3, Hinges inserting unit: yes, Magazin for hinges!: yes, Radial arm machine: yes, Year :1995

Manufacturer: Cefla, Type: Easy 2000, Year: 2006, Work piece width min-max mm: 10-1300, Work piece hight min-max mm: 10-60, Work piece length min-max mm: 100-3000, Overall length metre: ca.25, Feeding speed m/min: 3-5, Water-based paint line: yes, Inlet conveyor: yes, wast cleaning: yes, work piece detection: yes, Conveyour system: Band, Spraying stations: 2, Fast exchange system spray gun carrier: yes, Laquer circles: 4, Laquer system - airless: yes, Laquer system - airmix: yes, Laquer recharging: yes, by rollers: yes, by scraper: yes, Water cleaning: yes, Circulating-air drier mm length in mm: ca.12000, machine ready for demonstration: yes, FREE TEXT: inkl 2 Lampen UV 120 Watt Trockner/12 Kremlin Pumpen /Pistolenwaschgerät und walzmaschine Sorbini Smartcoater, Year :2006

Üretici: SCM, Tür: RECORD 100 AL XL TVN, Yıl: 2010, Çalışma aralığı X: 3110, Çalışma aralığı Y ekseni: 1240, Besleme hızı maksimum m/dak: X=60, Y=45, Z=30, Tablo sayısı: 1, Travers tabla: evet, Vakum pompaları m³/h: 250, Testere ünitesi: evet, Magazin Adet: 12, Yıl :2010

Üretici: Superfici, Tür: Lackierstrasse, Yıl: 1999, Kontrol: Superfici Elmag, İş parçası genişliği min-maks mm: 10-1300, Min.-maks. mm cinsinden iş parçası yüksekliği: 3-80, Min.-maks. mm cinsinden iş parçası uzunluğu: 150, Besleme hızı min-maks m/dak: 5-20, Kontrol: Superfici Elmag, Lackwalze 1: Macun Dolgusu Valorta VAL S 3, UV Trockner 1: 1 Lambalı UV Kurutucu TU 166, Lackwalze 2: Çift Silindirli kaplayıcı Valorta FV/PF3 2T, UV TRockner2: 2 lamba UV TU 165, Yıl :1999

Üretici: Weinig Ferigungsanlage, Kontrol: Weinig, Yazılım: Klaes Sofware, Maschinensteuerung: Übergeordnet, Programlama istasyonu ofisi: evet, Üretici1: Weiniig Profimat, Makine tipi1: Profimat 23, Üretim yılı1: 1999, FREETEXT1: 5 Spindeln, Üretici2: Weinig, Makine tipi2: Unicontrol 10-5, Üretim yılı2: 1999, Üretici3: Weinig Transportsytem, Üretici4: Weinig, Makine tipi4: Unitec 10, Üretim yılı4: 1999, Üretici5: Stähle Schleifmaschine,

Üretici: Hoffmann, Tür: DEA, Yıl: ca.2000, Kırlangıç uzunluğu mm: 8 X 30, Doveling aletlerinin sayısı: 1, Tutkal yüksek basınç pompası: Niederdruckbehälter, Tutkal miktarı ayarı: evet, Dübeln yatay: evet, Beleimwerkzeuge: 1, Dovel yerleştirme: evet, Dübelgrösse mm: 8 X 30, SERBEST METİN: Maschine wird gereingt und geprüft vor Auslieferung, Yıl :ca.2000

Üretici: Pankoke und Kochsiek, Tip: BFA 03, Yıl: 1988, Alttan delme tepresi: 3, Yivli testere: 1x Yatay<CRLF>1x Vertikal, Yıl :1988

Üretici: IMA, Tip: Bima 600, Yıl: 1993, Kontrol: NUM 760, Çalışma aralığı X: 3000, Çalışma aralığı Y ekseni: 1200, Çalışma aralığı Z: 250, C ekseni: hayır, Freze mili sayısı: 1, Takım adaptasyon sistemi: HSK 63, Freze motoru 1 saat güç: 7,5, rpm 1): 1800-18000, Takım magazin sayısı: 1, Takım magazini başına takım sayısı: 8, Dikey matkaplar-X: 5, Masanın arkasındaki dururlar: evet, Masa sayısı: 1, Travers tabla: evet (Rolle), Vakum pompaları Adet: 2 X 80, Takım sıkma sistemi: vakuum, Yıl :1993

Üretici: Hüllhorst Türenbearbeitung, Yıl: 1997, Kontrol: Num 1060, Program: IMA, İşleme istasyonları: 2, 4 Achsensteuerung: evet, Çalışma aralığı X: 3000, Çalışma aralığı Y ekseni: 1250, Çalışma aralığı Z: 250, Arbeitsbereich C: 360, İş parçası genişliği min-maks mm: 400-1250, İş parçası uzunluğu min-maks mm: 500-3000, İş parçası kalınlığı min-maks mm: 10-60, Freze milleri yatay: 1, Güç kW 1: 4,5, RPM min-maks 1: ca. 6000, Freze milleri dikey: 1, Güç kW 2: 7,5, RPM min-maks 2: 1500-18000, Giriş konveyörü: Rollgang, Kilit kutusu kalıplama agregası: 1, C ekseni: evet, Yıl :1997

Üretici: Koch , Tür: Sigma, Yıl: 1985, Min.-maks. mm cinsinden iş parçası uzunluğu: 1800, Delme desteği yatay: 1, Bohrgetriebe yatay Stk.: 1, Alttan delme desteği: 1, Bohrgetriebe von unten Stk.: 2, Çalışma aralığı maks mm: 60, Raster mm: 32, Matkap mili sayısı: Yatay 21<CRLF>Vertikal 2 x 9, Çalışma aralığı maks mm: 60, Üretici: Koch , Yıl :1985

Manufacturer: IMA H 610 Tandem, Type: BIMA 610/2H/875, Year: 1997, Software: IMAWOOP, Working range X: 5.700, Working range Y-axis: 1.900, Working range Z: 440, C axis: yes, Programming station office: möglich, Work piece width min-max mm: 150 - 1.200, Min.-max. workpiece length in mm: 250 - 5200, Min.-max. workpiece height in mm: 10 - 120, Pendulum processing: yes, Number of milling spindles: 2, Tool adaption system: HSK 63F, Milling engine 1 hours power: 7,5, rpm 1): 1.500 - 18.000, Milling engine 2 hours power: 7,5, rpm 2): 1.500 - 18.000, Vertical drills-X: 2 x 7, Drill vertical Y: 2 x 12, Traverse table: yes, 2 station allocation: yes, Vacuum pumps m³/h: 2 x 200, Saw unit: yes, Edgebanding unit: no, Radial arm machine: yes, Year :1997

Manufacturer: Biesse, Type: Rover A 1532, Year: 2019, Control: NC BH660, Software: Telesrvice, Working range X: 3140, Working range Y-axis: 1560, Working range Z: 200, C axis: yes, Number of milling spindles vertical: 1, Tool adaption system: HSK 63 F, Milling engine 1 hours power: 13,2, rpm 1): 1000-24000, Tellerwechseler: 8, Pickup Wechlser: 16, Vertical drills-X: 17, Drill vertical Y: 11+6, Horizontal drills-X: 5, Drill horizontal Y: 3, Traverse table: 6, 2 station allocation: yes, Stops in the table front: yes, Stops in the table rear: yes, Vacuum pumps m³/h: 250, Saw unit: yes, Year :2019

Üretici: Weeke, Tip: BHX 500, Yıl: 2007, İş parçası genişliği min-maks mm: 70 - 1.000, İş parçası uzunluğu min-maks mm: 200 - 2.500, İş parçası kalınlığı min-maks mm: 4 - 80, Çalışma aralığı X: 2.500, Çalışma aralığı Y ekseni: 1.000, Çalışma aralığı Z: 80, Alttan dikey delme istasyonu: 32, Yukarıdan dikey delme istasyonu: 32, Delme yatay: 2, Yatay matkaplar-X: 2 x 8, Matkap yatay Y: 2 x 2, İğ sayısı: 1.500 - 7.500, İğ sayısı: 1.500 - 7.500, Yıl :2007

Üretici: Reichenbacher, Tip: Vision 2 Sprint, Yıl: 1999, Kontrol: Simumerik 840 D, Çalışma aralığı X: 6140, Çalışma aralığı Y ekseni: 1600, Çalışma aralığı Z: 480, Besleme hızı max m/dak: 60, Sarkaç işleme: evet, Freze mili sayısı: 4, Freze motoru 1 saat güç: 4,8, 2 istasyon tahsisi: evet, 4 istasyon tahsisi: evet, Vakum pompaları m³/h: 160, Yıl :1999

Manufacturer: Giardina , Type: Wasser UV Spritzstrasse, Year: 2005, Maschinensteuerung übergeordnet: yes, Work piece width min-max mm: 900, Work piece hight min-max mm: 10-100, Work piece length min-max mm: 4500, Feeding speed m/min: 2-6, UV track: yes, Wasserlackstrasse + UV: yes, Inlet conveyor: 2500, Dedusters: yes, Spraying machine: Dualtech 301, 2 Lackkreise: yes, Belt conveyor: yes, Einlaufrollgang: yes, Angular transfer: yes, Microwellentrocknung: yes, Jet drier mm: yes, Heating medium hot water: yes, Outlet roller conveyor mm: yes, UV Trockner Lampen: 2 von oben<CRLF>1 von unten, Wattleistung: 120, Adjustable: yes, Outlet transport mm: 4500, Jet drier: 1, Inlet conveyor: 2500, Spraying heads - total: 4, work piece detection: yes, Conveyour system: Rolle-Band, Spraying stations: 2, Fast exchange system spray gun carrier: yes, Laquer system - airmix: yes, Laquer recharging:  ...

Manufacturer: Reichenbacher, Year: 2011, Control: Siemens Sinumerik 840 D Solution Line mit NCU 720.2, Software: Frame-Concept, Work piece width min-max mm: 300-1500, Min.-max. workpiece length in mm: 2 X 2200 oder 1 X 4000 X 1600, Min.-max. workpiece height in mm: 10-120, Work piece width min-max mm: 300-1500, Min.-max. workpiece length in mm: 2 X 2200 oder 1 X 4000 X 1600, Number of milling spindles: 2 X 5 Achs, Tool adaption system: HSK 63, Milling engine 1 hours power: 18, rpm 1): 1000-24000, Kettenwechsler: yes, Number of tables: 2, Traverse table: yes, 2 station allocation: yes, Stops in the table front: yes, Vacuum pumps m³/h: 250, Portal machine: yes, Automatic setting up table: yes, Charging system double-sided: Roboter, Destacking unit: mit Lagerplätzen, Automatic charging: Roboter auf Fahrportal, Presentation possible: yes, FREE TEXT: Bohr undBänder Eindrehstation, Year ...

Üretici: Koch Windoor, Tip: BL-51-NC, Yıl: 1997, Kontrol: Beckhoff, İş parçası genişliği min-maks mm: 30-200, Min.-maks. mm cinsinden iş parçası uzunluğu: 100-5000, Min.-maks. mm cinsinden iş parçası yüksekliği: 10-90, Freze milleri yatay: 2, Freze milleri dikey: 2, Besleme hızı maks m/dak: ca.80, Matkap dikey Y: 5, Yatay matkaplar-X: 9, Matkap dişlileri: 3, Matkap dişlileri: 3, Matkap dişlileri: 3, Freze mili sayısı: 4, SERBEST METİN: Dübelwerkzeuge 3, Yıl :1997

Üretici: Priess und Horstmann, Tip: BAT III CNC, Yıl: 1994, Kontrol: Priess und Horstmann, Fonksiyon: 2, İş parçası genişliği min-maks mm: Topfband, Min.-maks. mm cinsinden iş parçası uzunluğu: evet, Min.-maks. mm cinsinden iş parçası yüksekliği: ca.2 X 1250, İstifleme ünitesi: 2600, Einlaufrollengang: 60, Dübel çakma istasyonu: 19, Montaj tipi: 2, Schliesszylinder Bohrstationen: 1, Montaj tipi: 2, Bänderbohrstationen: 1, Montaj tipi: 2, Menteşe takma ünitesi: 2 X9, Dübel sürme istasyonu: evet, raster tabla: 2 Stück Puffersetzeinheiten, Yıl :1994

Üretici: Busellato, Tip: Jet 6000 XXL, Yıl: 1999, Çalışma aralığı X: 4600, Çalışma aralığı Y ekseni: 1700, Çalışma aralığı Z: 150, Dikey matkaplar-X: 11, Dikey matkap Y: 9, Yatay matkaplar-X: 2+2, Matkap yatay Y: 2+2, Yıl :1999

Manufacturer: Homag, Type: KFR 21 und KFL 21 inkl.Winkelübergabe, Year: 1999, Control: 2 X NC 21, Program: Homatic, System comprising of: 2 Kantenmaschine mit Winklelübergabe, Kantenmaschine mit Doppelenprofiler Teil: 2 Zerspaner + Fügen, getrennte Kette: yes, Laserverleimteil: no, Kantenstärke min-max mm: 0,5-3, Work piece width min-max mm: 45, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 10-45, Strips min/max mm: no, Machine no 1: KFR 21, MA 1 Arbeitsbreite min-max: 250-2800 mm, MA 1 Kantenmaterialstärke min-max mm: 0,5-3,0, Ma 1 Fügefräsen: yes, Ma 1 Schutzfräsen: yes, MA 1 Feinfräsen: yes, MA 1 Nuten: yes, MA 1 Verleimteil gerade: yes, MA 1 Vorfräsen: yes, MA 1 Radiusfräsen 1: yes, MA 1 Radiusziehklinge: yes, MA 1 Flachziehklinge: yes, MA 1 Schwabbeln: yes, MA 1 Nuten: yes, Angular transfer: yes, Machine 2: KFL, MA 2 Kantenstärke 0,5-3 mm: yes, ...

Manufacturer: IMA mit Verleimung, Type: GX30/E/130/430, Year: 2014, Control: IMA, Software: IMA Woop 10, Barcode: möglich, Maschinensteuerung: IMA Woop 10, Programming station office: yes, Work piece width min-max mm: 1400, Min.-max. workpiece length in mm: 150-4300, Min.-max. workpiece height in mm: 10, C axis: yes, Pendulum processing: yes, Work piece width min-max mm: 1400, Min.-max. workpiece length in mm: 150-4300, Min.-max. workpiece height in mm: 10, Number of milling spindles: 1, Tool adaption system: HSK F-63, rpm 1): 1000-24000, Number of tool changers: 18, Tellerwechseler: 1, Pickup Wechlser: 1, Mitfahrender Werkzeugwechsler: yes, Working widht max mm: 1400, Number of tables: 2, Traverse table: yes, 2 station allocation: yes, Stops in the table front: yes, Vacuum pumps m³/h: 2 X 120, Saw unit: yes, Edgebanding unit: yes 2 Fach Rolle, Edgeband hight mm: 55, Magazine Qty:  ...

Manufacturer: Biesse, Type: Rover C6.50 Edge, Year: 2011, Control: Biesse, Software: Works, Work piece width min-max mm: 1.535, Min.-max. workpiece length in mm: 4.600, Min.-max. workpiece height in mm: 225, Working range X: 5.255, Working range Y-axis: 1.963, Working range Z: 350, Pendulum processing: yes, Work piece width min-max mm: 1.535, Min.-max. workpiece length in mm: 4.600, Min.-max. workpiece height in mm: 225, Number of milling spindles: 2, Tool adaption system: HSK F63, Milling engine 1 hours power: 12, Kettenwechsler: 22, Vertical drills-X: 12, Drill vertical Y: 17, Horizontal drills-X: 4, Drill horizontal Y: 2, 2 station allocation: yes, Vacuum pumps m³/h: 250, Saw unit: yes, Edgebanding unit: yes, Edgeband hight mm: 9 - 54, Radial arm machine: yes, Waste conveyor belt: yes, Zentralschnierung: yes, Year :2011

Üretici: Uniteam, Tür: Unicawood KR, Yıl: 2011, Kontrol: evet, Yıl :2011