kaynak makineleri kullanılmış satılık (1,678)

Stud welding machines 2 pcs. technical data see pictures Auction-ID: A7-48486-214

Welding turntable with - Footswitch - Tilting/swivelling by hand - Speed infinitely adjustable - Welding current transmission - Hole in face plate 30mm, 20mm deep. - Documentation in English only. Table diameter 330 mm Table load 350 kg Swivel range 135 degrees Tilt adjustment: manual/mechanical manual Speed max. 5 rpm infinitely variable Table load 120 kg. vertical Total power requirement 0.125 kW Condition: never used / new (5) Auction-ID: A7-48486-70

Welding turntable with - Footswitch - Tilting/swivelling by hand - Speed infinitely adjustable - Welding current transmission 250 amps Table diameter 450 mm Table load 300 kg Swivel range 90 degrees Speed 0.2 - 2 infinitely variable rpm Table load 300 kg vertical Total power requirement 220 kW Machine weight approx. 0.078 t Dimensions approx. 0.66 x 0.45 x 0.48 m Condition: never used / new (5) Auction-ID: A7-48486-64

Welding Table / Perforated Table incl. accessory set WMT Basic-Set 2.0 The table is made of 25mm high-alloy, Plasma nitriding steel S355J2+N (St 52/3) Surface hardness 850 Vickers Grinded surfaces, Planed. Hole diameter: 28mm, Holes lowered 3mm. Grid 100 x 100mm Sidewalls 200mm Bore spacing in the sidewalls 50mm, Diagonal grid. Height adjustable from approx. 830 - 890mm Substructure reinforced with flat steel 140 x 15mm incl. bottom bearing diameter 110mm Table length 2000 mm Table width 1000 mm Table height 900 mm Table load 3000 kg Machine weight approx. 0.45 t Dimensions L x W x H 2.0 x 1.0 x 0.9 m Auction-ID: A7-48486-78

Roller block with Load capacity 1000 kg Workpiece diameter 20 - 800 mm Drum diameter 200 x 50 mm Feed rate 80 - 1600 mm/min Total power requirement 0.23 kW Dimensions 600x500x500mm Condition: never used / new (5) Auction-ID: A7-48486-62

10 pcs quick-release clamping bolts for 28mm system Plate thicknesses 25mm Quantity: 10 pcs. Hole diameter 28 mm Weight 10 kg Dimensions L x W x H, 0.3 x 0.3 x 0.2 m Condition: never used / new (5) Auction-ID: A7-48486-183

Welding turntable with - Large passage 165mm - Footswitch - Tilting motorically - Speed infinitely adjustable - 250 amp welding current transmission documentation in English. Table load 500 kg Table load 250 kg. vertical Table diameter 550 mm Swivel range 135 (-45 - +90) degrees Speed 0 - 5 infinitely variable rpm Connection voltage 230 V Total power requirement 0.8 KW Machine weight approx. 0.255 t Dimensions approx. 0.82 x 0.73 x 0.71 m Condition: never used / new (5) Auction-ID: A7-48486-122

Basic Set 4 / 53 pieces for table top thickness 15mm and 25mm 6 pcs screw clamps 14 quick-clamping bolts 2 pcs universal stop 100mm 6 pcs universal stop 150mm 4 pcs universal stop 225mm 2 pcs universal stop 300mm 2 pcs stop and clamping angle 75mm 4 pcs stop and clamping angle 175mm 4 pcs stop and clamping angle 275mm 2 Prisms 60mm 1 Burner Holder 1 pc. eccentric stop 100mm diameter 1 pc. hole brush 30mm 2 pcs separating lotion 500ml, on a natural, bio-based 2 pcs welding table cleaner 500ml, on a natural, bio-based Condition: never used / new (5) Auction-ID: A7-48486-209

Set 3: 77 pieces, 28mm system, consisting of: Ferrules: 10 x 280610.N Ferrules: 6 x 280630.N Prism: 4 x 280648.1.N Bolt: 24 x 160511 Magnetic Bolt 4 x 280740 Stop: 8 x 280410.N Stop: 8 x 280420.N Angle: 6 x 160110.N Angle: 2 x 280152.N Angle: 2 x 280162.N Angle: 1 x 280166.N Angle: 1 x 280167.N Accessory set. 1 x 283999 Number 77 Lots Weight 146 kg Condition new Hole diameter 28 mm Auction-ID: A7-48486-204

Container Rotating Device Load capacity 2.2 t Workpiece diameter 101 - 1524 mm Feed speeds infinitely variable 0 - 3600 mm/min Wheel diameter 254 mm Wheel width 76 mm Total power requirement 0.5 kW Machine weight approx. 0.245 t Space requirements approx. 1.02 x 0.82 x 0.5 m Condition: never used / new (5) Auction-ID: A7-48486-169

consisting of: 11 Burners 1 pc. cutting torch see pictures Auction-ID: A7-48486-92

Mobile Welding Lift Table/Perforation Table: Hole diameter: 28mm Hole spacing 100mm The table is made of 15mm thick, high-alloy steel S355 JR T=15 The surface is untreated. Ribbed underside for reinforcement. Table length 1200 mm Table width 800 mm Hole diameter 28 mm Table height 450 - 800 mm Load capacity 500 kg Machine weight approx. 0.8 t Condition: never used / new (5) Auction-ID: A7-48486-72

Lincoln Electric Red-D-Arc DX500e CC/HP DC Diesel Welder with up to 500 Amps. Equipped with Lincoln Electric wire feeder, MIG torch, electrode holder, ground clamp and patch cables. Compatible with MIG/MAG and MMA processes. Stand-alone unit with 115 V, 230 V and 400 V auxiliary sockets also allowing use as an electric generator. Built-in digital display and electronic welding current adjustment. Machine for intensive work in the workshop and on site. Shows normal signs of use Auction-ID: A3-46197-37077

Set 4: 110 pieces, 28mm system, consisting of: Ferrules: 14 x 280610.N Ferrules: 10 x 280630.N Prism: 6 x 280648.1.N Bolts: 30 x 160511 Magnetic Bolt 8 x 280740 Stop: 10 x 280410.N Stop: 10 x 280420.N Stop: 4 x 280430.N Angle: 8 x 160110.N Angle: 2 x 280152.N Angle: 2 x 280162.N Angle: 1 x 280164.N Angle: 1 x 280165.N Angle: 1 x 280166.N Angle: 1 x 280167.N Trolley: 1 x 280910 Accessory set. 1 x 283999 Number of 106 Lots Weight 283 kg Condition new Hole diameter 28 mm Auction-ID: A7-48486-159

Electrode furnace: Capacity 5 Kg Inner dimensions (LxWxD) 100 x 75 x 450 mm Power 0.4 kw Connection voltage 220 - 240 V Adjustment device 30 - 180 degrees Weight 10 kg Dimensions L x W x H 570 x 200 x 150 mm Condition: never used / new (5) Auction-ID: A7-48486-158

Welding helmet Protection level 4 - 12 m Power supply 2 x CR2032 Weight 460 grams Dimensions 250 x 270 x 230 mm Condition: never used / new (5) Auction-ID: A7-48486-152

Welding-turning-tilting table - Wireless remote control - 2 x welding current transmission Table diameter 1000 mm Table load 1200 kg Swivel range 0 - 135 degrees Speed 0.1 - 1.0 rpm Total power requirement 1.5 kW Machine weight approx. 0.8 t Condition: never used / new (5) Auction-ID: A7-48486-74

Welding turntable with - Footswitch - Tilting/swivelling by hand - Speed infinitely adjustable - Welding current transmission - Hole in face plate 30mm, 20mm deep. - Documentation in English only. Table diameter 330 mm Table load 220 kg Swivel range 135 degrees Tilt adjustment: manual/mechanical manual Speed max. 5 rpm infinitely variable Table load 100 kg. vertical Total power requirement 0.125 kW Condition: never used / new (5) Auction-ID: A7-48486-76

Welding-turning-tilting table - Remote control - Welding current transmission max. 500 amps - Face disc passage 80mm Table diameter 650 mm Table load 600 kg Swivel range 90 degrees Speed 0.2 - 3.0 rpm Total power requirement 0.55 + 0.4 kW Machine weight approx. 0.28 t 0.85 x 0.75 x 0.75m Documentation in English. Condition: never used / new (5) Auction-ID: A7-48486-216

Welding turntable with - Large passage 65mm - Footswitch - Tilting/swivelling by hand - Speed infinitely adjustable - 250 amp welding current transmission - Hole in face plate 65mm. Documentation in English only. Table load 110 kg Table load 55 kg. vertical Table diameter 250 mm Hollow spindle diameter 65 mm Chuck diameter 200 mm Swivel range 0 / 30 / 60 / 90 degrees Speed 0 - 8 infinitely variable rpm Total power requirement 0.15 KW Machine weight approx. 25 kg Space requirement approx. 0.5 x 0.53 x 0.6 m Condition: never used / new (5) Auction-ID: A7-48486-194

Echoscope see pictures Auction-ID: A7-48486-196

10m Screw Clamps Projection 120mm Length 300 mm Condition new Hole diameter 28 mm Number of 10 Lots Weight 30 kg Condition new Hole diameter 28 mm Condition: never used / new (5) Auction-ID: A7-48486-213

Basic Set 2 / 32 pieces for table top thickness 15 and 25mm 6 pcs screw clamps 12 pcs quick-clamping bolts 2 pcs universal stop 100mm 4 pcs universal stop 150mm 2 pcs universal stop 225mm 2 pcs stop and clamping angle 175mm 1 pc. hole brush 300mm 1 Burner Holder 1 non-stick spray 500ml, on a natural, bio-based 1 pc. welding table cleaner 500ml, on a natural, bio-based Condition: never used / new (5) Auction-ID: A7-48486-156

Auction-ID: A1-48540-799

Welding table / hole table with accessories: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T=15 The surface is untreated. Sidewalls 165mm Height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. incl. floor storage Pictured accessories included! Surface flatness 0.2 - 0.4mm to 1000mm. Very stable base, This allows the table with pallet truck. Table length 2400 mm Table width 1200 mm Table height 850 - 900 mm Machine weight approx. 0.65 t without pallet truck Condition: never used / new (5) Auction-ID: A7-48486-114

Basic set 3 / 43 pieces for table top thickness 15mm and 25mm 6 pcs screw clamps 12 pcs quick-clamping bolts 6 pcs universal stop 150mm 4 pcs universal stop 225mm 2 pcs universal stop 100mm 2 pcs stop and clamping angle 175mm 2 pcs stop and clamping angle 275mm 2 Prisms 60mm 1 pc. eccentric stop 100mm diameter 1 Burner Holder 1 pc. hole brush 30mm 2 pcs separating lotion 500ml, on a natural, bio-based 2 pcs welding table cleaner 500ml, on a natural, bio-based Condition: never used / new (5) Auction-ID: A7-48486-168

Special set 31 pieces, 28mm system, consisting of: 1x Tool Trolley 10x Staking Bolts 10x Ball Lock Pin 3x Professional Screw Clamp, 300 x 150mm 3x Professional Screw Clamp, 300 x 200mm 2x Professional Pipe Screw Clamp 180° 2x Professional Pipe Screw Clamp 45° Material: Burnished quality steel ATTENTION Tool is designed for 25mm table top thickness. Number of 96 Lots Weight 600 kg Condition new Hole diameter 28 mm Auction-ID: A7-48486-132

Welding table accessories P-Set 1: 27 pieces, 28 mm system (for 15 mm table thickness), consisting of: Clamps: 5 Sk.100/350 mm Stop: 2 pieces 500mm Stop: 2 pieces 150mm Angle: 2 pieces 175 x 175 mm Flat angles: 2 pieces. 350 x 250 mm Flat brackets: 2 pieces 275 x 150 mm Eccentric discs 2 pcs. 100mm Quick-release screws: 10 pcs. Number of 33 Lots Weight 52 kg Condition new Hole diameter 28 mm Condition: never used / new (5) Auction-ID: A7-48486-174

Welding table / hole table: with milled and deburred holes Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T=15 The surface is untreated. Sidewalls 165mm Height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. incl. floor storage Accessories optional Surface flatness 0.2 - 0.5mm to 1000mm. Table length 2990 mm Table width 1490 mm Table height 850 - 900 mm Machine weight approx. 0.8 t Auction-ID: A7-48486-117

10 pcs quick-release clamping bolts - 28mm hole system - For 25mm table thickness Quantity: 10 pcs. Clamping range 25 mm Hole diameter 28 mm Weight 10 kg Dimensions L x W x H 0.3 x 0.3 x 0.2 m Auction-ID: A7-48486-149