torna kullanılmış satılık (2,807)

turning diameter: 42 / 140 mmturning length: 170 mmcontrol: Mitsubishi Meldas turning speeds: 80-8.000 U/minc-axis: 0,001° turret (x-stations): 2x 12 (VDI 20) angetriebenturning speeds: 45-4.500 U/minspindle: 1 kWgripping station: 42 mmturning speeds: 60-6.000 U/minc-axis: 0,001° number of controlled axis: 8 collet unit: 48 DIN 6343 .Number of working hours: 10769 hchip conveyor: ja/yes Bj. 2018total power requirement: 7,5 / 11 kWweight of the machine ca.: 3,3 tdimensions of the machine ca.: 2,4 x 1,6 x 2,2 mCNC turning and milling machine CITIZEN BOLEY BE 42, year 2007Simultaneous working with 7 axes on main and pick-up spindlevery good condition, operating hours 21.999h (September 2024)Accessories:# Various tool holders (see picture)5x axiale driven tool holder# collet chuck for collets type 173E# additional coolant cooler# Knoll chip conveyor, year of construction 2018The Boley BE 4 ...

turning length: 500 mmturning diameter over bed: 297 mmturning diameter over slide rest: 160 mmspindle bore: 36.0 mmtool adaptor: DIN 55022 Gr. 5quill:: 3 MKquill travel: 90.0 mmturning speeds: 30 - 3550 U/minmotor speeds:: 1410 / 2830 U/mintotal power requirement: 3.3 kWvoltage: 380 Vweight of the machine ca.: 620 kg.range L-W-H: 1420 x 700 x 1200 mm from a vocational school - in very good condition () particularly suitable for medium-precision turned parts Features:- Robust lead/feed screw lathe- RÖHM three-jaw chuck Ø 160 mm- Foldable lathe chuck guard- Chuck key- MULTIFIX steel holder A, with 3x new inserts- Movable tailstock- Swiveling machine light- Control panel, front left- Automatic feeds for face and upper support- Machine base, with cabinet door (storage space)- Chip splash guard rear panel- Emergency stop button- Operating instructionsThe data for this ad was created with M ...

: gebraucht : 2001 : 010191 : prompt, Zwischenverkauf v : Deutschland : 24500 €: 1 : 320 mm: 650 mm: 160 mm: 40 mm: 192 mm: 205 mm: 5 : 5 MK: 16 : 48 - 2500 1/min: 24 : 0.02 - 0.63 mm/U: 0.006 - 0.2 mm/U: 0.25 - 8 mm: 80 - 2 Gänge/: 0.2 - 4 : 200 - 5 : 150 mm: 100 mm: 40 mm: 3 MK: 85 mm: 2,4 / 3 kW: 1582 mm: 715 mm: 1245 mm: 720 kgHeidenhain 3-axis digital readoutNEWRöhm 3-jaw chuck, 160 mm diameter, with internal and external jawsQuick-change tool post with one rectangular insert and one round insertQuick-release collet chuck with collets from 3 to 30,5 mmLive centreDrill chuckChuck guardLead and feed screw guardMotor brakeCoolant systemMounting feetOperating instructions in German with CE declaration of conformityBUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISEWe offer you maximum security and complete transparency.• HONEST INSIGHTS: Detailed photos and funct ...

turning diameter: 12,7 mmturning length: 50 mmcontrol: Traub System TX 8i turning speeds: 12000 U/minc-axis: 0,001° gripping station: 12,7 mmc-axis: 0,001 °speeds: 12000 U/minrapid traverse: 15 m/minturret (x-stations): 6 worktool system: 5+3 worktool system: 3 Werkzeugsysteme total power requirement: 2,5/4 kWweight of the machine ca.: 2 tdimensions of the machine ca.: 2,4 x 1,1 x 1,7 mdriven tools: 6+4+4 Rev+S7+S8CNC turning machine Traub TNL 12K with barloader LNS Tryton 112Motor drive S8 (rear working with driven tools possible)Motor drive S7 (front working with driven tools possible)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2025 : 010105 : prompt, Zwischenverkauf v : Bulgarien : 50210 €: 948.97 €: 1 : 600 mm: 2000 mm: 300 mm: 80 mm: 400 mm: 400 mm: 8 : 90 MK: 21 : 20 - 2000 1/min: 120 : 0.04 - 12 mm/U: 0.02 - 6 mm/U: 64 : 0.5 - 120 mm: 60 - 1/4 Gänge/: 0.125 - 30 : 315 mm: 130 mm: 90 mm: 5 MK: 230 mm: 7.5 kW: 3600 mm: 1250 mm: 1400 mm: 3110 kgdriven by conventional gearbox3-axes digital readout Fagor 40iquick change toolpostAmestra Multisuisse type C with 4 holders (3 square, 1 round)3-jaw chuck Bison3204/DIN6350, Ø 250 mmspindle dead centerfour way rapid traverse deviceelectromagnetic brakelongitudinal stop for 1 positioncoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platesquick release tailstocklow voltage machine lampoperating manualmachine according to ",CE",FURTHER TURNING LENGTHS (PRICES ON ...

spindle bore: 58,0 mmturning diameter: 430 mmturning length: 760 mmturning dia. in gap: 690 mmturning diameter over slide rest: - mmcentre height: 235 mmturning speeds: 20 - 2000 U/minquill:: 4 MKbed width: 300 mmtotal power requirement: - kWweight of the machine ca.: 1700 kgFeatures:- Digital display- 3-jaw chuck - Multifix - Tool holder- Removable bridge- Machine light- Chuck guard- Lockable emergency stop- Machine light - Coolant system- Operators manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: - mmturning length: - mmswing diameter over bed slide: - mmtotal power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: - mWEILER Bundle- RDU - LZ 330- 2 x Commodor- UD 24- DZ 67 V3The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

swing diameter: 370 - 800 mmweight of the machine ca.: 650 kgdimensions of the machine ca.: 20,41,3 mOpen steady rest / setting block - fixed with 4 quillsBed width approx. 360 mmTotal base width approx. 720 mmCentre height approx. 500 mmSpace requirement approx. 1950 x 400 x 1300 mmWeight approx. 650 kgWorking range: approx. Ø 370 - 800The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2011 : 010192 : prompt, Zwischenverkauf v : Deutschland : 26700 €: 1 : 320 mm: 650 mm: 160 mm: 40 mm: 192 mm: 205 mm: 5 : 5 MK: 16 : 48 - 2500 1/min: 24 : 0.02 - 0.63 mm/U: 0.006 - 0.2 mm/U: 0.25 - 8 mm: 80 - 2 Gänge/: 0.2 - 4 : 200 - 5 : 150 mm: 100 mm: 40 mm: 3 MK: 85 mm: 2,4 / 3 kW: 1582 mm: 715 mm: 1245 mm: 720 kgHeidenhain 3-axis digital readoutNEW Röhm 3-jaw chuck, 160 mm diameter, with internal and external jawsQuick-change tool post with one rectangular insert and one round insertQuick-release collet chuck with collets from 3 to 29 mm diameter (in 1 mm increments)Live centreDrill chuckChuck guardLead and feed screw guardMotor brakeCoolant systemMounting feetOperating instructions in German with CE declaration of conformityBUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISEWe offer you maximum security and complete transparency.• HONEST INSIGH ...

: neu : ca. 4 Monate ab Auftragse : Bulgarien : 113620 €: 2147.42 €: 800 mm: 2000 mm: 400 mm: 260 mm: 560 mm: 560 mm: 318 MK: 12 : 8 - 400 1/min: 152 : 0.039 - 15 mm/U: 0.02 - 7.5 mm/U: 76 : 0.5 - 150 mm: 60 - 1/5 Gänge/: 0.125 - 37.5 : 240 - 4/5 : 410 mm: 150 mm: 105 mm: 6 MK: 225 mm: 11 kW: 6000 kgTheir main purpose is to process pipes. Accordingly, this type of machines is widely used in the oil industry.Oil country lathes have large capabilities of processing inner and outer cylindrical and conical threads on pipes with large diameters.The clamping of the pipes with two universals and stands allows the processing of long pipes.These lathes are suitable for producing elements and equipment for the oil industry, as well as for maintaining such facilities.Drive via gearboxElectrodynamic brake3-axis digital display FagorQuick-change tool holder Amestra type C, system like Multifix i ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 95950 €: 1813.46 €: 630 mm: 2000 mm: 85 mm: 400 mm: 350 mm: D1-8 : 1/16 MK: 3 : 37 - 2250 1/min: 5000 mm/min: 8000 mm/min: 280 mm: 75 mm: 5 MK: 190 mm: 9 / 13.5kW (S1 / S6 40%) kW: X: 0.02 Z: 0.04 mm: X: 0.01 Z: 0.035 mm: ISO3655 : 3840 mm: 1905 mm: 2235 mm: 4200 kgTHREE OPERATING MODES: CNC / TEACH-IN / MANUALSiemens 828D CNC control• 12-inch colour screen• Linear interpolation• Circular interpolation• Helical interpolation• Skip function• Workpiece coordinate system• Coordinate system rotation• Rigid tapping• Mirror image, scaling and rotation• Turning cycle• ShopTurn softwareLarge spindle bore, with precision bearings for high accuracy and consistent cutting stability.Precision ball screw Ø 40 mm (Class C5) on the Z-axis and ball screw Ø 25 mm (Class C3) on the X-axis.2-axis AC servo motors50-300 mm roller-type ...

turning diameter: 475 / 260 mmturning length: 1000 mmcontrol: Heidenhain Manual Plus turret head: SAUTER 12 x VDI 30 3-jaw chuck: SCHUNK Rota S 250 spindle head: DIN 55026 A6 spindle bore: 78 mmNumber of working hours: ca. 15.000 htotal power requirement: 25 kWweight of the machine ca.: 3 tdimensions of the machine ca.: 3 2 2 mSonderpreis bei Übernahme ab WerkAktueller, unklarer DefektSteuerung fährt nicht hochThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning length: 1000 mmturning diameter over bed: 380 mmturning diameter over slide rest: 190 mmnumber of spindle speeds: 25 - 2000 U/min.turning speeds: 18 Stk.spindle bore: Ø 56,0 mmtailstock quill taper MT: DIN 228 / MK 4 quill stroke: 150 mmbed width: 310 mmspindle taper: DIN 55027 / 6 feeds - longitudinal: 0,022 - 0,8 mm/Ufeeds - cross: 0,011 - 0,4 mm/Uthread: M 0,3 - 10,0 mmvoltage: 380 Vtotal power requirement: 7,5 kWweight of the machine ca.: 1600 kg Basic functions are available Machine with various leaks Sold in current condition at a special price !Lathe with precision ground and induction hardened bed.Very suitable, for example, for use in workshops and teaching facilities.- machine video -https://www.youtube.com/watch?v=zCGu4i6V5dMFurnishing:- robust lead and pull spindle lathe- FORKARDT 3-jaw chuck Ø 200 mm, with chuck key- MULTIFIX steel holder - size B - with 3x inserts ...

turning diameter over bed: 280 mmturning diameter over slide rest: 150 mmturning length: 800 mmturning speed range: 26 - 2000 U/minspindle bore: 24 mmtotal power requirement: 0,8 / 1,6 kWweight of the machine ca.: 0,5 tdimensions of the machine ca.: 1,60 0,70 1,20 m1. Hand - School MachineThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 760 mmturning length: 3000 mmswing diameter over bed slide: 520 mmcentre height: 380 mmreus: 17 (7,5 - 1015) U/mintail stock: MK6 quill stroke: 225 mmdiameter of quill: 105 mmspindle bore: 132 mmfeed: längs 0,039 - 18 mm/minfeed: quer 0,02 - 9 mm/mintotal power requirement: 15 kWweight of the machine ca.: 4700 kgdimensions of the machine ca.: 4900 x 1650 x 1650 mm- Coolant device- Machine light- Chip back wall- Spindle protection- Lathe chuck protection- Tool holder protection- Interchangeable gearsSpecial equipment- 3-jaw chuck Ø 250 mm type 3204/ DIN6350, BISON- MULTIFIX quick-change holder type B, including 4 tool holders- 3-axis digital display DRO Newall- Foot pedal with brake function CEThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 400 mmturning length: 600 mmcontrol: Turn Plus CNC Pilot 3190 total power requirement: 44 kVAweight of the machine ca.: 5 tdimensions of the machine ca.: 6 2,5 2 mMachine has been in use until now ( 2-axis turning )Known defects:- Driven tools without function- Tailstock leaking - out of service- Sporadic problems hydraulics / leakingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 42 mmturning length: 250 mmcontrol: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mCNC-lathe with bar feedwith Sameca bar feed The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Bulgarien : 79430 €: 1501.23 €: 600 mm: 1500 mm: 300 mm: 80 mm: 400 mm: 400 mm: 8 : 90 MK: 3 : 20 - 100, 80 - 400, 400 - U/Min: max. 8 m/min: max. 8 m/min: 290 mm: 90 mm: 5 MK: 225 mm: 11 kW: 3,5 / 22 kW/Nm: 1,75 / 11 kW/Nm: 120 Nm: 1250 daN: 1050 daNFast and simple communication between the operator and the lathe.Simple workpieces are machined in the same way as on the universal lathe, but more efficient.Complicated workpieces are machined in the same way as on the universal lathe, but faster.Complicated workpieces are machined in the same way as on the CNC lathe, but easier.Based on the controller Schneider Magelis the intelligent, self-developed ZMM Sliven softwareleads the operator also without programming skills simple and fast to the finished workpiece.The interface is simple and with large icons, which is convenient in a specific work enviro ...

: neu : ca. 4 Monate ab Auftragse : Bulgarien : 46970 €: 897.13 €: 500 mm: 1500 mm: 250 mm: 80 mm: 300 mm: 400 mm: 8 : 80 MK: 21 : 20-2000 1/min: 120 : 0.04 - 12 mm/U: 0.02 - 6 mm/U: 64 : 0.5 - 120 mm: 60 - 1/4 Gänge/: 0.125 - 30 : 240 - 1 : 315 mm: 130 mm: 90 mm: 5 MK: 230 mm: 7.5 kW: 3100 mm: 1250 mm: 1400 mm: 2820 kgdriven by manual transmission3-axes digital readoutquick change toolpostAmestra with 4 holders (3 square, 1 round)3-jaw chuck Bison 3204/DIN6350, Ø 250 mmspindle dead centerlongitudinal stop for 1 positioncoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platesquick release tailstocklow voltage machine lampoperating manualmachine according to ",CE",FURTHER TURNING LENGTHS: turning length1.000 mm € 45610,00 turning length2.000 mm € 49010,00 turning length3.000 mm € 53 ...

: neu : Bulgarien : 56920 €: 1075.79 €: 630 mm: 2000 mm: 315 mm: 103 mm: 430 mm: 400 mm: 11 : 120 MK: 21 : 12,5 - 1250 1/min: 120 : 0.04 - 12 mm/U: 0.02 - 6 mm/U: 0.5 - 120 mm: 60 - 1/4 Gänge/: 0.125 - 30 : 240 - 1 : 315 mm: 90 mm: 90 mm: 5 MK: 230 mm: 11 kW: 3310 kgdriven by manual transmission3-axes digital readoutquick change toolpostAmestra with 4 holders (3 square, 1 round)3-jaw chuck Bison 3204/DIN6350, Ø 315 mmspindle dead centerlongitudinal stop for 1 positioncoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platesquick release tailstocklow voltage machine lampoperating manualmachine according to ",CE",FURTHER TURNING LENGTHS: turning length1.000 mm € 53520,00 turning length1.500 mm € 54880,00 turning length3.000 mm € 61360,00 turning length4.000 mm € 67270,00 turning len ...

: neu : Bulgarien : 64180 €: 1213 €: 630 mm: 2000 mm: 315 mm: 103 mm: 430 mm: 400 mm: 11 : 120 MK: 3 : 16 - 63, 63 - 250, 315 - U/Min: 120 : 0.04 - 12 mm/U: 0.02 - 6 mm/U: 0.5 - 120 mm: 060 - 1/4 Gänge/: 0.125 - 30 : 315 mm: 130 mm: 90 mm: 5 MK: 230 mm: 11 kW: 3310 kgdriven by variable speed control (2 steps)3-axes digital readout FAGOR with CSS (constant surface speed)quick change toolpostAmestra with 4 holders (3 square, 1 round)3-jaw chuck Bison 3204/DIN6350, Ø 315 mmspindle dead centerlongitudinal stop for 1 positioncoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platesquick release tailstocklow voltage machine lampoperating manualmachine according to ",CE",FURTHER TURNING LENGTHS: turning length 1.000 mm € 60780,00 turning length1.500 mm € 62160,00 turning length3.000 mm €  ...

: neu : Bulgarien : 114970 €: 2172.93 €: 890 mm: 3000 mm: 400 mm: 155 mm: 490 mm: 700 mm: 15 : 160 MK: 24 : 160 : 0.032 - 38.9 mm/U: 0.016 - 19.45 mm/U: 0.5 - 480 mm: 60 - 1/16 Gänge/: 0.125 - 120 : 525 mm: 270 mm: 125 mm: 6 MK: 260 mm: 22 kW: 7500 kgdriven by manual transmission3-axes digital readoutquick change toolpostAmestra with 4 holders (3 square, 1 round)3-jaw chuck Bison 3204/DIN6350, Ø 500 mmspindle dead centercoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platestailstock quill reducerelectric motor movement of tailstocklow voltage machine lampoperating manualmachine according to ",CE",FURTHER TURNING LENGTHS: turning length1.500 mm € 100120,00 turning length2.000 mm € 103850,00 turning length4.000 mm € 123510,00 turning length5.000 mm € 134810,00 turning length6.000 ...

turning diameter: 250 mmturning length: 450 mmcontrol: TX8D bore: 80 mmspindle speed:: 3150 U/min.CNC Lathe with Bar Feed and 3 TurretsVery large spindle bore, with bar loading devicePlease ask for further details.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : Bulgarien : 126650 €: 2393.69 €: 890 mm: 3000 mm: 400 mm: 155 mm: 490 mm: 700 mm: 15 : 160 MK: 4 : 3,7 - 15,6, 14,7 - 62, 58 U/Min: 160 : 0.032 - 38.9 mm/U: 0.016 - 19.45 mm/U: 0.5 - 480 mm: 60 - 1/16 Gänge/: 0.125 - 120 : 525 mm: 270 mm: 125 mm: 6 MK: 260 mm: 30 kW: 7500 kgdriven by variable speed control (4 steps)3-axes digital readout FAGOR with CSS (constant surface speed)quick change toolpostAmestra with 4 holders (3 square, 1 round)3-jaw chuck Bison 3204/DIN6350, Ø 500 mmspindle dead centercoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platestailstock quill reducerelectric motor movement of tailstocklow voltage machine lampoperating manualmachine according to ",CE",FURTHER TURNING LENGTHS: turning length1.500 mm € 111610,00 turning length2.000 mm € 115430,00 turning  ...

Manufacturer: Gildemeister Type: CTX 420 linear V3 Year of Make: 2003 Control: Heidenhain Plus IT (DataPilot) Max. circumferential diameter: 680 mm Circumferential diameter over face slide: 565 mm Max. turning diameter: 324 mm Max. turning length: 600–635 mm X-axis travel: 260 mm Y-axis travel: ±40 mm (depending on equipment) Travel Z-axis: 635 mm Spindle speed: 20–5,000 min⁻¹ Drive power main spindle: 37 / 25 kW (40/100 % DC) Max. torque main spindle: 390 / 270 Nm Bar Passage: 65 mm Chuck size: 200 mm Tool turret: 12-cavity Sauter Tool holder: VDI 30 or VDI 40 (depending on the version) Number of driven tools: up to 12 Tool speed: up to 4,500 min⁻¹ Tool drive power: 12.2 kW Tool torque: 27 Nm Rapid traverse X: 60 m/min Rapid traverse Y: 15 m/min Rapid traverse Z: 45 m/min Tailstock: MK5 Tailstock stroke: 580 mm Tailstock force: 800 daN Machine weight: approx. 6,500 kg ...

TRAUB TNS 60 CNC Lathe - Manufacturer: TRAUB - Type: TNS 60 - Year of construction: 1986 - Serial number: 837 - CNC control: TRAUB System TX8-D - Operating hours according to the display: approx. 22,000 h - Main drive: 39 kW - Operating voltage: 420 V / 50 Hz - 12-cavity tool turret - Chip conveyor KNOLL Filtron available - Coolant system available - Control cabinet cooling unit available - Machine starts, control active (see photos) - Used condition with signs of wear due to age and use - Paint damage, soiling and corrosion traces present - Includes accessory package with clamping devices, tool holders, holders, adapters and other machine accessories - Scope of accessories according to photos - Sale includes the accessories shown in the photos Note: The sale is made exclusively according to the photos provided. All visible accessories are included in the scope of delivery. ...

: gebraucht : 2023 : 1675 : prompt, Zwischenverkauf v : Bulgarien : 17600 €: 1 : 325 mm: 1000 mm: 165 mm: 32 mm: 190 mm: 200 mm: 5 : 4,5 MK: 12 : 85 - 2.000 1/min: 48 : 0.006 - 1.77 mm/U: 0.003 - 0.885 mm/U: 0.1 - 28 mm: 75 - 2,5 Gänge/: 0.1 - 1.75 : 150 mm: 95 mm: 40 mm: 3 MK: 100 mm: 2.2 kW: 2150 mm: 950 mm: 1350 mm: 770 kgdemo machine / mint conditionnet price (price for new machine € 23.970,00)driven by manual transmission3-axes digital readout Fagor 40iquick change toolpostAmestra with 4 holders (3 square, 1 round)3-jaw chuck Bison 3204/DIN6350, Ø 160 mmspindle dead centercoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platesquick release tailstocklow voltage machine lampoperating manualmachine according to ",CE",incl. following optional equipment:1 lenght stopBUYING USED MACHINER ...

Technical data Circumferential diameter over bed: 500 mm Circumferential diameter over face slide: 290 mm Plan travel: 260 mm Center width: 1,000 mm Control: Manual Plus Heidenhain Main spindle Speed range: 8 – 3,000 rpm⁻¹ Drive power: 12 kW Max. torque: 920 Nm Gear Stages: 2 – Level 1: 8 – 750 min⁻¹ – Level 2: 32 – 3,000 min⁻¹ Spindle head: 8 / DIN 55027 Spindle bore: 70 mm Usable rod diameter: – mm Spindle diameter in front bearing: 120 mm Spindle nose: ME 80 Chuck diameter: 250 mm Tool Carrier Type: Multi-Fix C Tailstock Quill diameter: 80 mm Quill stroke: 180 mm Quill holder: MK 5 Feeds Rapid traverse X: 8 m/min Rapid traverse Z: 10 m/min Feed speed X: max. 5,000 mm/min Feed speed Z: max. 5,000 mm/min Total power requirement: 24 kVA Auction-ID: A7-48896-14

Conventional lead and pull spindle lathe Make presumably Bosch, type class no. 01527 (not verified) 3-jaw chuck mounted Tailstock available Tool holder with tool holder available Integrated coolant tray and chip tray Electrics partially modernized with Siemens Sirius contactors Connection via 400 V three-phase current Solid cast design Used condition with signs of wear and tear due to age Dirt, paint damage and corrosion traces present Weight approx. 1,200 kg Dimensions approx. 2,000 × 900 × 1,300 mm (L × W × H) Auction-ID: A1-48288-8010

Manufacturer: TRAUB Type: TNM 42 Year of manufacture: 1993 Serial Number: 212 CNC control: TRAUB system TX 8F Spindle Passage: 42 mm Motor power: 19 kW Operating voltage: 400 V / 50 Hz Operating hours: approx. 32,099 h Including KNOLL bar feeder type 280 S-1/320 Year of construction bar feeder: 1995 Including KNOLL chip conveyor Machine was demonstrated during inspection under power Scope of delivery: TRAUB TNM 42 CNC automatic lathe with KNOLL bar feeder, KNOLL chip conveyor. Auction-ID: A1-48288-8006