torna kullanılmış satılık (3,092)

Center length: 500 mmCenter height above bed: 150 mmTurning diameter over bed: 300 mmCenter height over support: 100 mmTurning diameter over support: 200 mmSpindle passage: approx. 28 mmEquipped with: – Multifix turning steel holder – Four-jaw chuck (Ø 130 mm) – Digital display from the manufacturer HEIDENHAINReference: Mahle Auction-ID: A7-46763-350

Machine number: 291218Center width: 760 mmCenter height: 205 mmSpindle bore: 58 mmMain spindle Speeds 12: from 20 to 2000 rpmSpindle head mount: CAMLOCK 6incl. two-axis digital display from the manufacturer FAGORThe machine is equipped with a tailstock, a Multifix turning steel holder and a three-jaw chuck from the manufacturer SMW AUTOBLOK, diameter: 200 mm and a steady restReference: Hercegfi - Lot 48 Auction-ID: A7-46763-220

Operating voltage: 400 VFrequency: 50 HzRated current: 225 AConnection: 62 kVASwing diameter over bed: 250 mmSwing diameter over slide: 250 mmMax. turning diameter: 250 mmStandard Turning diameter: 100 mmMax. turning length: 435 mmMax. rod size: 51 mmChuck size: 6 inchTravel X-axis: 195 mmTravel Z-axis: 480 mmSpindle speed: 4500 rpmInfinitely adjustableSpindle nose: A2-5Spindle bore: 63 mmFront spindle bearing diameter: 90 mmRod passage: 52 mmTailstock Travel: 620 mmTailstock Rapid traverse: 24 m/minBall screw diameter: 32 mmBall screw pitch: Diameter 12 mmDistance between spindle lugs: min. 250 mm, max. 870 mmPosition accuracy of the feed axes: 0.05 mmRapid traverse X-axis: 12 m/minRapid traverse Z-axis: 24 m/minThe machine is equipped with a counter spindle, HAINBUCH clamping system, a main spindle with HAINBUCH clamping system, a double turret with the tool holders shown on the turre ...

Serial Number: 324Operating Voltage: 380 VFrequency: 50 HzConnection: 20 kVAControl: MORIC-T5FCircumference Diameter over Bed: 450 mmCircumnavigation Diameter over Turret: 300 mmCenter Width: 595 mmStandard Diameter: 160 mmMax. Turning Length: 525 mmTravel X-Axis: 222 mmTravel Z-Axis: 560 mmSpindle Speed: from 50 to 5000 rpmSpindle Bore: 52 mmFront Bearing Inner Diameter: 90 mmNumber of Tools: 12max. 6 stations for driven toolsShaft cross-section of the lathe bits: 20 mmShaft diameter for boring rods: max. 32 mmSpindle speed of the driven tools: 100 - 2000 rpmRapid traverse X-axis: 12,000 mm/minRapid traverse Z-axis: 15,000 mm/minFeed speed in X-axis: 0.00001 to 250 mm/minZ-axis: 0.00001 to 350 mm/minTipping feed speed X- and Z-axis: 1260 mmTailstock Travel: 450 mmquill diameter: 75 mmquill travel: 80 mmthe machine is equipped with a tailstock, as well as a 12-cavity tool turretincludi ...

Machine number: 61699Operating voltage: 380 VFrequency: 50 HzConnected load: 3 kWRated current: 25 ASpindle speed: 71 - 3550 rpmTip length: approx. 500 mmTip height above bed: 140 mmTurning diameter over bed: 260 mmTip height over support: 80 mmTurning diameter over support: 160 mmSpindle passage: approx. 28 mmincl. tailstock, Multifix Type A steel holder and steady restfour-jaw chuck (diameter: 120 mm)Reference: Showroom Auction-ID: A7-46763-339

Technical data Manufacturer: WEILER Model No.: Intern 140 Machine No.: 85140112 Operating voltage: 380 V Control voltage: 220 V Connected load: 2.2 kW Frequency: 50 Hz Speeds: 630 / 1000 / 1600 / 2500 rpm Center width approx. 800mm Configuration 3-jaw chuck Tailstock available Multifix tool holder HEIDENHAIN Digital Display Coolant Setup Base frame with storage space Accessories and interchangeable wheels in the base cabinet Machine in used condition Auction-ID: A7-47277-3056

: neu : ca. 4 Monate ab Auftragse : Bulgarien : 36070 €: 688.94 €: 400 mm: 1000 mm: 200 mm: 52 mm: 235 mm: 320 mm: 6 : 6 MK: 12 : 50-2.240 1/min: 80 : 0.015 - 0.6 mm/U: 0.0075 - 0.3 mm/U: 40 : 0.25 - 7.5 mm: 120 - 4 Gänge/: 0.0625 - 1.875 : 480 - 16 : 235 mm: 110 mm: 50 mm: 4 MK: 100 mm: 4 kW: 2750 mm: 1100 mm: 1600 mm: 1540 kgdriven by manual transmission3-axes digital readout Fagor 40iquick change toolpostMultisuissewith4 holders (3 square, 1 round)3-jaw chuck Bison 3204/DIN6350, Ø 200 mmspindle noseNr. 6 DIN 55027four way rapid traverse devicespindle dead centercoolant equipment1 pce. flange plate for lathe chuckØ 200 mm1 adapter sleevefull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platesquick release tailstocklow voltage machine lampoperating manualmachine according to ",CE",FURTHER TURNING LENGT ...

Auction-ID: A1-47219-7

Technical data Lead and pull spindle lathe Manufacturer: NARDINI Type: ND 220 AE Speed range: 25 - 2000 rpm Electrical connection: 380 V / 50 Hz Connected load: 6.3 kW 3-jaw chuck Ø approx. 250 mm Configuration With guide and pull spindle With tailstock With quick-change steel holder Tapping device available Feed and thread tables on the machine Integrated machine substructure Emergency stop switch available Machine with splash guard Auction-ID: A7-47277-3016

Technical data Manufacturer: WEILER Model: Matador VS1 Speed range: 30 - 3550 rpm 16 speed levels Electrical connection: 380 V Dimensions approx. 1500 x 700 x 1550 mm Configuration 3-jaw chuck HEIDENHAIN Digital Display Tailstock with drill chuck Quick-change steel holder Collet set in the base cabinet Accessories with tips, jaws and tool holders Protective cover on the chuck Machine in used condition Auction-ID: A7-47277-3058

Technical data Manufacturer: EMCO Model: Maximat Super 11 Speeds: 55 / 110 / 200 / 300 / 410 / 600 / 1100 / 2200 rpm 8 speed levels Digital display: ELESTA VISULESTA II E Hardened machine bed Configuration 3-jaw chuck available Additional 3-jaw chuck Collet holder with collet set Quick-change steel holder Tailstock available Accessories with tool holders and tips Machine in used condition Auction-ID: A7-47277-3061

Auction-ID: A7-47277-2153

Auction-ID: A1-47219-5

Technical data Manufacturer: HAMLET Machine type: Lead and pull spindle lathe 3-jaw chuck mounted Lead screw and pull screw available Threading device available Interchangeable wheel arch available Configuration Collet set included in the base Extensive accessory package with interchangeable wheels Tailstock available Upper slide available Longitudinal and plane feed Compact precision lathe in heavy-duty casting design Auction-ID: A7-47277-3011

Sub spindle Driven tools Y-axis Technical Details Drehdurchmesser max. 246 mm Drehlänge max. 445 mm Supporting Fanuc 32 iS Distance between Spitzen 665 mm Spitzenhöhe 365 mm Length diameters over bed 500 mm Length diameters over shelf sections 375 mm Standard diameter 170 - 210 mm Main spindle: Max. Drehzahl Main Spindle 6,000 min/-1 Antriebsleistung - Main spindle 12 kW Max. torque 115 Nm Spindle bearing diameter: 100 mm Spindle drilling 73 mm max. Useless rod diameters 50 mm C-Achse 0.001 ° Spindle head FL 140 h5 max. Futterdurchmesser 170 - 210 mm Futterdurchmesser ( - ) mm Gegenspindle: Max. Drehzahl Gegenspindle 6.000 min/-1 Antriebsleistung - Gegenspindle 7.5 kW Max. torque 48 Nm Spindle bearing diameter: 90 mm Spindle drilling 44.5 mm max. Useless rod diameters 37 mm C-Achse 0.001 ° Spindle head FL 140 h5 max. Futterdurchmesser 170 mm Futterdurchmesser ( - ) mm Transport: ...

Technical data Manufacturer: HAMLET Model: Primus Machine Type: Precision guide and pull spindle lathe Type: Conventional lathe Center height: approx. 125 mm (Source: online) Circumferential diameter over bed: approx. 250 mm (Source: online) Circumferential diameter over support: approx. 130 mm (Source: online) Center width: approx. 500 mm (Source: online) Spindle bore: approx. 28 mm (Source: online) Speed range: 60–3000 rpm (source: online, rev plate visible) Motor power: approx. 1.5–2.2 kW (Source: online) Configuration 3-jaw chuck Multifix quick-change steel holder Tailstock Machine Light Base frame with switching unit Various tool holders and drill chuck holders Accessory kit according to photos Note There are no original documents or technical documentation available for the machine. The technical data provided have been researched from several independent online sources an ...

Technical data Manufacturer: MATRA Type: MD 22 Machine type: Lead and pull spindle lathe Voltage: 380 V Frequency: 50 Hz Control voltage: 220 V Rated current: 17 A Fuse: 25 A Main motor: AEG AM 132 MR4 Motor speed: 1445 rpm Degree of protection: IP54 Speed range: approx. 100 – 2000 rpm Turning length: approx. 1500 mm Configuration 3-jaw chuck available Tailstock available Steel holder available Guide and pull spindle available Heidenhain digital displacement measuring system available Machine mounted on machine foot Used condition Auction-ID: A7-47277-3000

Tool changer front: Number of tools 7 positions Revolutions: 150 - 3000 rpm, 300 - 6000 rpm Intake diameter: 40 mm X-axis travel: 370 mm Z-axis travel: 250 mm Tool Changer Rear: Number of tools: 5 positions Revolutions: 150 - 3000 rpm, 300 - 6000 rpm Intake diameter: 40 mm X-axis travel: 73 mm Bar Feeder: FMB Turbo 5-42 Bar length: 3200 mm Bar diameter: 5 - 42 mm Pallet: 17 driven tool holders 110 Collets Type: 171E Auction-ID: A1-47219-12

Technical data Manufacturer: KNUTH Model: Basic 170 Super Machine Type: Lead and pull spindle lathe Center width: approx. 700 mm Dimensions: approx. H1300 x W700 x L1700 mm Configuration Three-jaw chuck mounted Tailstock available 4-fold tool holder available Machine light available Additional three-jaw chuck available Lathe chisel set available Dial gauge with magnetic base available Rotating centering tip available Various clamping devices and tool accessories available Auction-ID: A7-47277-3109

Technical data Manufacturer: WEILER Model No.: Matador Turning diameter over bed: 260 mm Speed range: 15 - 3550 rpm 34 speed levels Dimensions approx. 1500 x 800 x 1650 mm Configuration 3-jaw chuck HEIDENHAIN Digital Display MULTI SUISSE quick-change steel holder Tailstock available Collet set in the base cabinet Accessories with tips, clamping devices and tool holders Machine in used condition Auction-ID: A7-47277-3060

Technical data Manufacturer: GUILD MASTER Model: CTX 400 Machine Type: CNC Lathe Control: Gildemeister CNC / ElektroPilot Operating hours: approx. 18,462 h Max. turning diameter: 400 mm (Source: online) Max. turning length: 640 mm (Source: online) Circumferential diameter over bed: 500 mm (Source: online) Spindle bore: 72 mm (Source: online) Speed range: 25 - 5,000 rpm (Source: online) X-travel: 212 mm (Source: online) Z-travel: 640 mm (Source: online) Tool turret: 12-speed (Source: online) Tool holder: VDI 30 (Source: online) Machine weight: approx. 5.1 - 5.5 t (Source: online) Configuration 3-jaw chuck Berg KH200 12-speed tool turret Chip conveyor available Coolant equipment available Closed work area cladding CNC controller with screen Note No original technical documentation available. The technical data was researched from several independent online sources and was only adopted ...

: neu : ca. 4 Monate ab Auftragse : Bulgarien : 82740 €: 1563.79 €: 860 mm: 3000 mm: 430 mm: 132 mm: 620 mm: 560 mm: 11 : 140 MK: 17 : 7,5 - 1015 1/min: 150 : 0.039 - 18 mm/U: 0.02 - 9 mm/U: 0.5 - 180 mm: 60 - 1/6 Gänge/: 0.125 - 45 : 240 - 2/3 : 435 mm: 150 mm: 105 mm: 6 MK: 225 mm: 15 kW: 3470 mm: 1700 mm: 1730 mm: 4650 kgdriven by conventional transmission3-axes digital readoutquick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round)3-jaw chuck Bison3295/DIN6350, Ø 400 mmspindle dead centerfour way rapid traverse devicefoot pedal brakelongitudinal stop for 1 positioncoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platesquick release tailstocktailstock quill reducermechanized movement of tailstocklow voltage machine lampoperating manualmachine according to ",CE",F ...

Auction-ID: A1-47219-16

Technical data Manufacturer: HAMLET Type: UD 24 CNC Year of Make: 1993 Machine No.: 327 Control: Siemens Sinumerik 820 T GA3 Voltage: 380 V Connected load: 11.25 kW Max. circumferential Ø over bed: 190 mm Max. turning length between tips: 190 mm Spindle passage: 36 mm Max. spindle speed: 8000 rpm Operating hours: approx. 21909.8 h Configuration 2-axis path control Siemens 820 T GA3 8-fold tool system Tool wheel Ø 185 mm VDI 3425 Tool holder Ø20 mm Pneumatic-hydraulic tailstock Quill stroke 80 mm Quill Cone MK2 Hand Pneumatic Hydraulic Clamping Device Röhm Chuck Type 27/40 Pressure collet device Ø24 mm Prepared for bar feeding Workpiece collection and universal interface available Auction-ID: A7-47277-3045

: neu : Bulgarien : 24940 €: 478.85 €: 325 mm: 750 mm: 165 mm: 32 mm: 190 mm: 200 mm: 5 : 4,5 MK: 2 : 85-405, 470-2200 U/Min: 48 : 0.006 - 1.77 mm/U: 0.003 - 0.885 mm/U: 0.1 - 28 mm: 0.1 - 1.75 : 70 - 4 : 150 mm: 95 mm: 40 mm: 3 MK: 100 mm: 2.2 kW: 2150 mm: 950 mm: 1350 mm: 770 kgdriven by variable speed control (2 steps)3-axes digital readout FAGOR with CSS (constant surface speed)quick change toolpostAmestra with 4 holders (3 square, 1 round)3-jaw chuck Bison 3204/DIN6350, Ø 160 mmspindle dead centercoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platesquick release tailstocklow voltage machine lampoperating manualmachine according to ",CE",FURTHER TURNING LENGTHS: turning length1.000 mm € 25.360,-The data for this ad was created with ModulMWS - the software solution of LogoTech oHG ...

Working space: Max. swing diameter: 525 mm Max. turning diameter: 300 mm Max. turning length: 497 mm Bar work up to a diameter of max. 65 mm Main spindle: Speed range: 35 – 4,000 rpm Main drive power: 18.5 KW Constant torque: 350 Nm Spindle nose: A2 – 8 inches Spindle bore: 76 mm Spindle positioning c – axis: 0° - 360°/0.001° Tool turret: Number of tool positions: 12 (can be equipped with fixed and driven tools as required) Turret switching time: - 1st station: approx. 0.2 s Powered tools: Drive power: 3.7 KW Max. torque: 35 Nm Speed range: 25 – 4,500 rpm Travels: Turret travel: x – Axle: 180 mm z – axis: 575 mm y – axis: 100 mm (+- 50 mm) Travel speed: Rapid traverse: x – axis: 30 m/min z – axis: 12 m/min c – axis: 400 rpm Feed range: x/y/z – axis: 0 – 5,000 mm/min c – axis: 1° - 2,000°/min Tailstock: Quill stroke: 150 mm Recording: MK 5 Tailstock trav ...

Technical data Manufacturer: Colchester Model: MASCOT (Electronic Mascot) Machine Type: CNC Lathe Control: GE Fanuc Series 20-T Spindle speed: approx. 20 – 1600 rpm Spindle bore: approx. 74 – 76 mm Turning diameter over bed: approx. 430 mm Turning diameter over slide: approx. 260 – 270 mm Center width: approx. 1200 – 2500 mm Spindle motor power: up to approx. 11 kW Weight: approx. 2.2 – 3.0 t Configuration CNC control Fanuc 20-T Tool holder / turret (typical) Tailstock available Coolant Setup Closed machine enclosure Note The technical data was researched on the basis of publicly available information on the Colchester Mascot series. Original machine documentation was not available. Deviations are possible. Auction-ID: A7-47277-31

Serial number CK08004 CNC control, brand, type SIEMENS SINUMERIK Machine weight 5000kg Dimension L 4100mm Dimension w 1800mm Dimension h 2300mm Auction-ID: A7-47277-160

: neu : Bulgarien : 133520 €: 2523.53 €: 1320 mm: 3000 mm: 625 mm: 155 mm: 940 mm: 700 mm: 15 : 160 MK: 4 : 3,7 - 15,6, 14,7 - 62, 58 U/Min: 160 : 0.032 - 38.9 mm/U: 0.016 - 19.45 mm/U: 0.5 - 480 mm: 1/16 - 60 Gänge/: 0.125 - 120 : 685 mm: 270 mm: 125 mm: 6 MK: 260 mm: 30 kW: 8550 kgdriven by variable speed control (4 steps)3-axes digital readout FAGOR with CSS (constant surface speed)quick change toolpostAmestra with 4 holders (3 square, 1 round)3-jaw chuck Bison 3204/DIN6350, Ø 500 mmspindle dead centercoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platestailstock quill reducerelectric motor movement of tailstocklow voltage machine lampoperating manualmachine according to ",CE",FURTHER TURNING LENGTHS: turning length1.500 mm € 118 670,00 turning length4.000 mm € 141 700,00 turni ...

: gebraucht : 2023 : 1675 : prompt, Zwischenverkauf v : Bulgarien : 17600 €: 1 : 325 mm: 1000 mm: 165 mm: 32 mm: 190 mm: 200 mm: 5 : 4,5 MK: 12 : 85 - 2.000 1/min: 48 : 0.006 - 1.77 mm/U: 0.003 - 0.885 mm/U: 0.1 - 28 mm: 75 - 2,5 Gänge/: 0.1 - 1.75 : 150 mm: 95 mm: 40 mm: 3 MK: 100 mm: 2.2 kW: 2150 mm: 950 mm: 1350 mm: 770 kgdemo machine / mint conditionnet price (price for new machine € 21.690,00)driven by manual transmission3-axes digital readout Fagor 40iquick change toolpostAmestra with 4 holders (3 square, 1 round)3-jaw chuck Bison 3204/DIN6350, Ø 160 mmspindle dead centercoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platesquick release tailstocklow voltage machine lampoperating manualmachine according to ",CE",incl. following optional equipment:1 lenght stopBUYING USED MACHINER ...