sac levha çalışması kullanılmış satılık (3,320)

Stored in working condition, buyer must provide transport himself. No elevator available. Auction-ID: A3-43519-17020

incl. compressed air tank Auction-ID: A7-46287-165

Operating voltage: 220/380 VFrequency: 50 HzReel diameter: approx. 1100 mm Auction-ID: A7-46287-152

Serial number: A-0448Load capacity: 500 kgReel diameter: approx. 1300 mm Auction-ID: A7-46287-148

: neu : ca. 2 - 4 Wochen ab Auftr : Niederlande : 853 €: 20 - 76,1 mm: 3 mm: 2.5 mm: 7 kgThe ALU can be used to notch a sink outflow in pipes with an external diameter of 22 mm to 76 mm.Since ALMI pipe notchers have a favourable price and high productivity they are an excellent investment.ALMI pipe notchers are available for cutting out venting slots in round and rectangular met pipes with an external diameter from 27 mm upwards and a wall thickness of a maximum of 3 mm.All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are immediately available.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine number: A0045A0007Operating voltage: 400 VFrequency: 50 HzConnection: 17 kVARated current: 35 ATravel X-axis: 2015 mmTravel Y-axis: 1215 mmMax. material thickness: 6.4 mmMax. workpiece weight: 150 kgMax. punching force: 165 kNmax. hold-down force: 10 kNMax. stroke sequences punching Hole spacing 1 mm: 600 rpmSigning: 1300 rpmMax. axis speed X-axis: 80 m/minY-axis: 55 m/minsimultaneous: 97 m/minmax. acceleration X-axis: 10 m/qsY-axis: 5 m/qsC-axis punching/thread forming: 175/minNumber of positions in the linear magazine: 17Number of tools/claws: 15/2Number of tools when using multi-tool/claws: 15-150/2Number of claws location/2: max. 2/3Reject parts: max. part size via disc chute: standard 180 x 150 mmmax. part size via disc chute with movable support table: 460 x 500 mmAccuracy position deviation: +- 0.1 mmAverage position spreading width: +- 0.03 mmincl. matching workshop cab ...

: gebraucht : 2023 : 9676 : prompt, Zwischenverkauf v : Deutschland : 13700 €: 1 : 1250 mm: 1.25 mm: 1,25 mm bei 1 Messerpaar, : 0.37 kW: 36 m/min: 70 mm: 1900 mm: 1600 mm: 1000 mm: 350 kgdemo machine / mint condition - fixprice3 pairs of bladesLength measuring by wheelDigital preselection of one positionBrake motorRubber feeding rollsManual crosscutting equipment in front and behind blade shaftwith 1 cutting slide which alternaingly can be used on front and backsideUser manual in GERMANOPTIONS:Additional pair of bladesDecoilerThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 2 - 4 Wochen ab Auftr : Niederlande : 4955 €: 3/4 26,9 mm, 1 33,7 mm, mm: 5 mm: 3 mm: 87 kgThe motor driven AL 1-2E can be used to notch pipes with an external diameter of 26.9 mm (3/4",), 33.7 mm (1",), 42.4 mm (1 1/4",), 48.3 mm (1 1/2",) and 60.3 mm (2",).Do you often have to notch pipes? If so, the motor-driven AL1-2E equipped with a 2.2 kW electric motor is the ideal solution!The motor forms one unit with the special eccentric shaft that drives the notching tool. The motor is also equipped with an on/off switch with a zero voltage protection and guard.All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are readily available, ideal for double corner joints.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : Wechseltisch Laser sources from 3 - 30 kWTable dimensions:3 x 1,5 / 4 x 2 / 6 x 2 / 6 x 2,5 mThe shuttle table is positioned longitudinally, which results in the best possible accessibility for optional loading and unloading systems.The system consists of the following components:Shuttle table system in longitudinal direction for simultaneous loading/unloading and cutting to reduce non-productive production timesEncapsulated cutting room with protective glazingCNC graphics control Siemens Sinumerik 840DLaser source Brilase or IPGCutting head with automatic focus adjustment, Durma or PrecitecCooling unit for cutting head and laser sourceCAD/CAM software LANTEK for programming including autonestingPositioning laserSheet check system (automatic detection of sheet position and dimensions)Automatic nozzle cleaningCentral lubricationSlug boxWorking ...

: neu : ca. 6 Monate ab Auftragse : Spanien STANDARD EQUIPMENT• Uncoiler• Coil car• Pneumatic input table• Entry guide• 7 Straightening rolls• Slitting shaft with 3 sets of quickly adjustable circular blades• Cut-to-length shears• ServomotorOPTIONS• Hydraulic input table• Film plastic device• Scrap rewinders• Additional circular blades• Stacking tables• Packers Model: Width to process: Cutting thickness (mm): Coil weight (kg) Number of straightening rolls: Cutting accuracy: Number of straightening rolls: Production speed: TwinCut 20 DM6 100012501500 0`5 - 2 6.000 3 - 6+/? 0`5 mm 2 + 7 20 m/min TwinCut 20 DM10 10.000 TwinCut 20 DM15 15.000 MATERIAL TO BE PROCESSED: THICKNESS: N OF SIMULTANEOUS CUTS: Steel 420 Nw/mm2 2`00 mm 3 1`50 mm 4 0`50 mm 6 Steel 700 Nw/mm2 1`25 mm 3 1`00 mm 4 0`50 mm 6 Steel 200 Nw/mm2 4`00 mm 3 2`00 mm 5 1`00 mm 6IF YOU ARE INTERESTED, P ...

: neu : 2026 : 090202 : Mai 2026, Zwischenverkauf : Türkei : 3100 €: 1.2 mm: 100 mm: 140 nm: 8 Stk.: 62 mm: 0.75 kW: 32 1/min: 900 mm: 450 mm: 1350 mm: 135 kgHaevy duty cast iron main frameBrake motorFoot pedalAdjustable lower roll8 set of rollsComplete with standUser manual in ENGLISH or GERMANThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Türkei : 29990 €: 572.81 €: 0.4 - 3.5 mm: 200 mm: 700 mm²: 80 mm: 75 m/min: 10 m/s²: 10 Nmhelical gear boxWATTDRIVE (Made in Austria)FESTO pneumatic equipmentservo drive and control SIEMENS7", colour touchscreen SIEMENS2 driven rollsOPTIONAL EQUIPMENTHandrwheel and Simlinx remote control € 4.290,--The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Italien : 57900 €: 1094.31 €: 1 : 650 mm: 0,5 - 170 mm: 670 x 2200 mm: 4000 m³/h: 120 mm: 6 bar: 78 (+/-2) dB: 22 kW: 2600 mm: 1350 mm: 2100 mm: 1125 kgWITH 2 WORKING STATIONS: 1 X GRINDING BELT UND 1 X BRUSH UNIT ON TOPMachine made of stress-free welded steel construction for stable and rigid structure.Work table with motorised height adjustment via 4 synchronised spindles.Independent drive motors for each work group.Hoods for extraction inside the machine, one per station.Touch screen for-Automatic star-delta connection of the main motors- Analogue ammeter for each group- Digital display for sheet thickness with decimal point tolerance- Material thickness adjustment (+/- 0.1 mm)- Machine condition monitoring with alarm messagesFEEDING SYSTEMRobust steel structure, wear-resistant surface.Vacuum conveyor belt on requestVariable feed speed via freq ...

Stored in working condition. The buyer must provide his own transport. Elevator available to charge it. Auction-ID: A3-43519-17031

: neu : 2024 : 9739 : prompt, Zwischenverkauf v : Türkei : 22300 €: 428.16 €: 1 : 1 : 2030 mm: 6 mm: 6 mm: 5 mm: 170 mm: 4 kW: 3600 mm: 1020 mm: 1120 mm: 2400 kg3 rollsAsymmetrical rolls arrangement - with pre-bending2 driven rollsMotorized adjustment of lateral and clamping rollDigital read-out for lateral and clamping rollSwiveling top roll to the frontForward/reverse runHardened rollsMoveable control panelUser manual in GERMAN and ENGLISH(sample photo)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Without pallet truck Auction-ID: A1-46045-254

Incl. housing Auction-ID: A1-46045-94

serial number: 4412956673057 : 95 to. ca. engine output: 7,5 kWweight of the machine ca.: ca 5 tdimensions of the machine ca.: 2,2 × 1,0 × 2,3 m Technical specifications (from the label)Angle steel (L-profile):150 × 15 mm at 90°100 × 14 mm at 45°Flat steel:up to approx. 150 × 16 mmlarger cross-sections up to 340 × 16 mm (depending on function)Beam profiles:U-profiles (UPN): 220I-sections (IPN)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stroke 8-40 mm, flywheel diameter 400 mm, power requirement 1.5 kW, speed 120-600 rpm Auction-ID: A1-46045-205

: neu : ca. 10 Wochen ab Auftrags : Türkei : 31600 €: 603.56 €: 2050 mm: 6 mm: 6 mm: 4 mm: 4 mm: 3 mm: 150 mm: 150 mm: 130 mm: 1,5 / 6 m/min: 4 kW: 4250 mm: 960 mm: 1100 mm: 2800 kg4 rollsTop rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan systemPinch roll and latereal rolls move with hydraulic cylindersDigital read-out for lower and side rolls positionHardened rollsConical bending deviceHydraulic load relieving of upper rollHydraulic drop-end bearing2 working speedsProtectionagainst overloadMoveable control paneAccording to CE rulesOPTIONAL EQUIPMENT:Infinitely adustable speed of rollsHydraulic side supportHydraulic top supportNC controlIMPORTANT ISSUES AT CONICAL BENDING:The max. sheet metal thickness isequivalent to 50 % of nominal capacityThe cone length can be max. 30 % oremust be more than 60 % of roll lengthHardened rolls are recommende ...

: neu : ca. 12 Wochen ab Auftrags : Italien : 3050 mm: 16 mm: 16 mm: 10 mm: 13 mm: 11 mmHardened and polished rollersNumerical control Siemens PGS-Classic with touchscreenCone bending with electronic control and inclination of the bottom rolleroil coolerSimultaneous rotation and roller movementSimultaneous roller and support movementPossibility to bend variable radii (ovals, ellipses, etc.)Hydraulic micro-positioning by the PLC for higher accuracyInfinitely variable speed for roller movementInfinitely variable speed for rotationPrepared for retrofitting supports (up to 5 axes)Prepared for retrofitting loading/unloading stationsPrepared for retrofitting CNC controlsExtra large, double hinged drop endElectronic parallelism system for the synchronization of the rollersHydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more)Double linear guide for the movemen ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 50900 €: 962.01 €: 2540 mm: 6.5 mm: Hydraulisch : 135 °: 3900 mm: 1750 mm: 2050 mm: 6200 kghydraulic drivenNC control for bending anglemanual back gauge 600 mmsharp rail 45° (in one piece)front angle beam 75 mmmechanical stop adjustment of upper beamclamping force adjustment of upper beamaccording to CE rulesALTERNATIVELY:versionAMH-K,withSECTIONEDsharp rail 45° € 48.300,--OPTION:2 axes NC control with 7", touchscreen incl. motorized back gauge 800 mm € 11.400,--(sample photos)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2025 : 090130 : prompt, Zwischenverkauf v : Türkei : 3400 €: 1 : 30 mm: 148 mm: 118 mm: 2 : 0,75 kW: 2 m/min: 50x10 mm / 800 mm, 20x6 m : 80x15 mm / 700 mm, 30 x 6 : 30x30 mm / 900 mm, 10x10 : Ø 30 mm / 900 mm, Ø 10 mm : Ø 60x1,5 mm / 1.000 mm, Ø : 50x30x3 mm / 1.200 mm, 40 : 40x40x3 mm / 1.200 mm, 30 : 40x40x5 mm / 600 mm, 30x3 : 35x35x5 mm / 600 mm, 30x3 : 600 mm: 800 mm: 1450 mm: 220 kg2 mech. driven rollsstrong cast steel constructionshafts made of special steel,hardened and groundtop roll manual adjustablehardened universal rollslateral rolls adjustable in 1 axishorizontal and vertical operationdouble foot pedal forfor- and backward drivemachine and equipment accordingto the CE regulationsuser manual in GERMAN or ENGLISHWE HAVE MORE THAN 210 REFERENCES!The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Deutschland : 8020 mm: 1.5 mm: 2 mm: 8 ELECTROCINEMATIC DRIVE OF THE BENDING JOINTSmillmeter precise adjustment of the clamping beamBMS MULTI-Touchcontrolelectric powered rotary shearelectronic depth stopflexible material supportsinclined bending beamoptimized geometry of the clamping beamsafety equipment accoring to the control rules BG Germany3 year warranty on stands and tension arms.Quality Made in Germany.FURTHER MODELS FROM3 UP TO12 M LENGTH AND FROM 1,25 MM UP TO 2,00 MM BENDING CAPACITY ON REQUEST.OPTIONS: Extended depth 1.250 mm price on request Conical depth stop to bend conical profiles andnarrow/wide bendings for easy intermateing price on request clamping beam made out of hardox price on requestPrices ex works Germany.Transport and commissioningat customers place on request.The data for this ad was created with ModulMWS - the software solu ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 46000 €: 878.6 €: 2540 mm: 3.5 mm: Hydraulisch : 135 °: 3.7 kW: 3850 mm: 1700 mm: 1860 mm: 3900 kghydraulic drivenNC control for bending anglemanual back gauge 600 mmsharp rail 45° (in one piece)front angle beam 75 mmmechanical stop adjustment of upper beamclamping force adjustment of upper beamaccording to CE rulesALTERNATIVELY:versionAMH-K,withSECTIONEDsharp rail 45° OPTION:2 axes NC control with 7", touchscreen incl. motorized back gauge 800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2026 : 070155 : prompt, Zwischenverkauf v : Türkei : 6900 €: 133.17 €: 1 : 500 kg: 1200 mm: 400 mm: 550 mm: 300 mm: 80 mm: 1450 mm: 1200 mm: 1640 mm: 260 kgmotorized drivemechanical adjustable coil mandrel with 4 jawsspeed control for decoiling speed aswell as acceleration- and deceleration timesphotoelectric proximity ensor SICK for sag controlPNEUMATIC DOWN HOLDER SUPPORT ARMThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Incl. housing, stroke rate 120-600 1/min Auction-ID: A1-46045-91

: gebraucht : 2009 : 9725 : prompt, Zwischenverkauf v : Spanien : 14700 €: 1 : 110 to: 300 mm: 5 : 2 : 40x20 (28x28) mm: 80 mm: 17 1/min: 600x15 (400x20) mm: 605 mm: 152x152x13 mm: 50/50 mm: 90x52x13 mm: 5 kW: 2130 mm: 1200 mm: 2200 mm: 2500 kg2 foot pedals for independent work at 2 stationshydr. driveflat bar shear with hydraulic downholderangle bar shear with minimum deformation by diagonal moving of the blade , with hydraulic downholderround and square bar shearrectangular notching unitpunching unit up to diam. 40 mmoilfillingtable at the punching station with gaugetable at the notching unit with gaugetable at the flat bar shearThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Italien : 2500 mm: 8 mm: 8 mm: 4.9 mm: 6 mm: 6 mmHardened and polished rollersNumerical control Siemens PGS-Classic with touchscreenCone bending with electronic control and inclination of the bottom rolleroil coolerSimultaneous rotation and roller movementSimultaneous roller and support movementPossibility to bend variable radii (ovals, ellipses, etc.)Hydraulic micro-positioning by the PLC for higher accuracyInfinitely variable speed for roller movementInfinitely variable speed for rotationPrepared for retrofitting supports (up to 5 axes)Prepared for retrofitting loading/unloading stationsPrepared for retrofitting CNC controlsExtra large, double hinged drop endElectronic parallelism system for the synchronization of the rollersHydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more)Double linear guide for the movement o ...

Auction-ID: A1-46045-85