sac levha çalışması kullanılmış satılık (3,277)

Largest blow impact: 40kp/mm2 Auction-ID: A1-43917-10

: : : toplam güç gereksinimi: makinenin kW ağırlığı ca.: makinenin boyutları ca.: mBu reklamın verisi, LogoTech oHG'nin yazılım çözümü olan ModulMWS ile oluşturulmuştur.

Max. loading weight 350 kg, suitable for lot 70 Auction-ID: A1-44095-78

working width: 1500 mmworkpiece width - max.: 0,5 - 50 mmdimensions: 3300 x 1500 x 1800 mmfeed stepless: 0-4 m/mintotal power requirement: 20,4 kWweight of the machine ca.: 2800 kgThe SBM-L G1S2 grinding and deburring machines were developed for double-sided deburring and edge rounding of workpieces in a single operation. LISSMAC machines are used for deburring sheet metal and processing sheet metal parts, laser parts, and stamped parts.The L series is equipped with three units on the top and bottom . Workpieces made of stainless steel, steel, aluminum or non-ferrous metal can be processed on the top, bottom or both sides. Processing sheet metal on both sides and rounding edges in a single operation saves up to 60% in time. It is also possible to easily connect automation solutions or integrate the machine into production lines. The machine design ensures ergonomic working and a pleasant ...

Hydraulic press for crimping hydraulic hoses, equipped with all the necessary dies for 0 hoses. 5 to 50 mm, never used 0 hours, packed in wooden crate Overall dimensions: 1000 x 800 x 1000 mm Weight: 270 kg Auction-ID: A7-43970-60

sheet width: 3050 mmplate thickness: 6 mmrear stop: 1000 mmcutting angle: 0,5 - 3 °down holder: 18 Stkno. of strokes: 9-17 Hub/mintotal power requirement: 7,5 kWdimensions of the machine ca.: 3800 x 2000 x 1600 mmweight: 4500 kgEquipment:- electric backgauge- electric cutting angle adjustment- manual cutting gap adjustment- SP 9 control unit- Safety guard behind the machine incl. light barrier- front finger guard- 1x side stop- operating instructionsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3050 mmplate thickness: 12 mmrear stop: 1000 mmcutting angle: 0,5 - 3,0 °down holder: 18 Stkno. of strokes: 7 - 14 Hub/minoil volume: 350 ltotal power requirement: 22,5 kWdimensions of the machine ca.: 4200 x 2000 x 2250 mmweight: 8500 kgEquipment:- Haco SP 8 control unit- electro-hydraulic guillotine shears - guided by a guide rail- electric backgauge- electric cutting gap adjustment- electric cutting angle adjustment- 1x side stop- front finger guard- rear safety device ( light barrier )- emergency stop device- 1x freely movable foot switch- operating instructionsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3060 mmplate thickness: 6.0 mmthickness at Niro-steel: 4.0 mmdistance between columns: 3100 mmdown holder: 16 Stückno. of strokes: max. 10 - 15 Hub/minoil volume: 160 ltr.cutting angle: 1.6 °back stop - adjustable: 6.0 - 750 mmControl: ELGO P9521 total power requirement: 18.5 kWweight: 6300 kgrange L-W-H: 3900 x 2300 x 1630 mmFeatures:- Robust electro-hydraulic swing beam shear- ELGO digital display model P9521, for electric backgauge Backgauge travel X = 750 mm Backgauge-free ball screw drive Travel speed 100 mm/s- 1x stable side stop With T-slot, flip-stop, and millimeter scale- 2x stable front support arms- Electric cutting length limiter Cutting length limiter to increase the stroke rate/min.- Manual cutting gap adjustment Centrally operated on the right side stand- Front support plates- Front finger/interference guard- Inching operation with push buttons on the left c ...

Suitable for Lot 1 Auction-ID: A1-44095-3

working width: 1000 mmworkpiece width - max.: 0,5 - 50 mmsandingbelt width: -- mmweight of the machine ca.: 2,5 tWith the SBM-L 1000 G1S2, which works in the dry process, in alternating operationSteel, stainless steel and aluminum can be machined. She deburrs and roundsthe edges on the outer and inner contours of punched, laser, fine plasma orwater jet cut workpieces with a thickness of up to 50 mmon both sides in just one operation. Two sanding units, 1 each on the top and bottom, remove spatterand slight burrs on outside and inside edges of sheet metal. A total of four sanding belts, 2 each on the top and bottomUnderside, process the sheets on both sides at the same time. hereAll edges are softened or rounded, depending on the tool settings. Machining on both sides saves time-consuming turning of the workpieces andedit twice. All pairs of aggregates can be switched on/off separately de ...

: gebraucht : 2009 : 9725 : prompt, Zwischenverkauf v : Spanien : 14700 €: 1 : 110 to: 300 mm: 5 : 2 : 40x20 (28x28) mm: 80 mm: 17 1/min: 600x15 (400x20) mm: 605 mm: 152x152x13 mm: 50/50 mm: 90x52x13 mm: 5 kW: 2130 mm: 1200 mm: 2200 mm: 2500 kg2 foot pedals for independent work at 2 stationshydr. driveflat bar shear with hydraulic downholderangle bar shear with minimum deformation by diagonal moving of the blade , with hydraulic downholderround and square bar shearrectangular notching unitpunching unit up to diam. 40 mmoilfillingtable at the punching station with gaugetable at the notching unit with gaugetable at the flat bar shearThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 16100 €: 309.12 €: 2050 mm: 3 mm: 35 1/min: 1.5 °: 750 mm: 3 kW: 800 mm: 520 mm: 2720 mm: 1575 mm: 1230 mm: 1900 kgThe machines feature a robust, welded steel frame for maximum cutting precisionMotorized back gauge 750 mm, ball screw spindles, NC control2 cutting edges on the upper blade and 2 cutting edges on the lower blade800 mm squaring arm with scale2 support armsMechanical downholderManual cutting gap adjustment on the frontCutting line illuminationFoot pedalEmergency stop buttonOperating manual with EC declaration of conformity.INCLUDES THE FOLLOWING OPTIONAL EQUIPMENT:Blades suitable for cutting stainless steelRear light barrier protectionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 19800 €: 380.16 €: 1550 mm: 6 mm: 30 1/min: 2.3 °: 750 mm: 7,5 kW: 800 mm: 530 mm: 1855 mm: 2220 mm: 1630 mm: 1230 mm: 2900 kgThe machines feature a robust, welded steel frame for maximum cutting precisionMotorized back gauge 750 mm, ball screw spindles, NC control2 cutting edges on the upper blade and 4 cutting edges on the lower blade1000 mm squaring arm with scale, T-slot, and flip stop2 support armsMechanical downholderManual cutting gap adjustment on the frontBalls in the tableCutting line illuminationFoot pedalEmergency stop buttonOperating manual with EC declaration of conformity.INCLUDES THE FOLLOWING OPTIONAL EQUIPMENT:Blades suitable for cutting stainless steelRear light barrier protectionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Incl. housing Auction-ID: A1-44095-103

Incl. housing Auction-ID: A1-44095-94

TRUMPF TrumaBend V85S – CNC press brake (85 t) • Manufacturer: TRUMPF • Model: TrumaBend V85S • Machine Type: CNC Press Brake / Die Bending Press • Press force: 850 kN (85 t) • Working length: approx. 2,550 mm • Stroke: approx. 215 mm • Installation height: approx. 385 mm • Projection: approx. 410 mm Facilities • CNC control with screen and control panel • Electronic backgauge • Safety light barrier / BendGuard system • Footswitch • Upper and lower tool holder • Transparent protective cladding in the work area • Pressure gauge display in the upper area • Side control cabinet (Rittal) Dimensions (approx.) • Width: 3,000 mm • Depth: 1,800 mm • Height: 2,700 mm • Weight: approx. 7,500 kg Condition • Used machine • Signs of wear and tear due to age and use • Contamination and inventories in the surrounding area not part of the auction Au ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 230188 €: 3 kW: Wechseltisch : 16 mm: 8 mm: 8 mm: 5 mm: 8 mm: 27,9 (mit Absaugung) kW: 4100 x 2070 mm: 4100 mm: 2070 mm: 125 mm: 4064 x 2032 mm: 240 (für 3 - 12 kW) / 400 kg/m²: 3900 (für 3 - 12 kW) / 64 kg: 100 m/min: 100 m/min: 141 m/min: 14 m/s²: +/- 0,05 mm: +/- 0,05 mm: 32 sThe HD-FN has two tables which are automatically switched alternately to enable simultaneous cutting and loading/unloading.The shuttle table is positioned longitudinally, which results in the best possible accessibility for optional loading and unloading systems.Control, laser source and cooling are integrated into the machine. The cutting head has automatic focus adjustment.The system consists of the following components:Shuttle table (positioned longitudinally for best possible accessibility for optional loading and unloading systems)Encapsulated cutting room  ...

Incl. housing, stroke rate 120-600 1/min Auction-ID: A1-44095-91

Incl. housing Auction-ID: A1-44095-70

Manufacturer: LVDModel: PPEB 100-30Year: 2001Type: CNC Hydraulic Press BrakesCNC Control: MNC95PPEB Series LVD Hydraulic Press Brake, designed for sheet metal bending operations in industrial environment. The machine is equipped with an MNC95 numerical control allowing the programming and control of bending cycles. Main features:• Maximum bending force: 110 tons• Useful bending length: 3,050 mm• Passage between uprights: 2,550 mm• Gooseneck depth: 250 mm• Maximum distance between table and ram: 400 mm• Ram stroke (Y1 / Y2): 200 mm• Speeds: approach 100 mm/s, working 9.5 mm/s, return 78 mm/sCNC axes: • 8 axes (Y1, Y2, X1, R1, Z1, X2, R2, Z2)Engine & hydraulic:• Engine power: 11 kW• Oil tank capacity: 150 litersCondition: Used machine, sold according to seller's description. Auction-ID: A1-44030-204

Manufacturer: COLLYModel: PS 63/25Year: 1991Type: Numerically Controlled Hydraulic Press BrakesCNC Control: CYBELECCOLLY CNC Hydraulic Press Brakes for Sheet Metal Bending Operations. Machine equipped with CYBELEC numerical control and motorized backgauge, suitable for common industrial sheet metal work. Main features:• Maximum bending force: 63 tons• Useful bending length: 2,500 mm• Passage between uprights: 2,120 mm• Gooseneck depth: 250 mm• Working height: 900 mm• Maximum table/ram distance: 360 mm• Ram stroke (Y1 / Y2): 7 to 150 mm• Speeds: approach 10 mm/s, work 7 mm/s, return 10 mm/s• Table width: 80 mm• Pit: noEquipment listed:• CYBELEC numerical control• Motorized rear gauge (stroke 600 mm)Condition: Used machine, sold according to the seller's description. Auction-ID: A1-44030-207

Belt width max. 200 mm, load capacity 150 kg, belt speed 5-25 m/min Auction-ID: A1-44095-98

sheet width: 3050 mmplate thickness: 6 mmdistance between columns: 3460 mmtable height: 800 mm0: 220 barcutting angle adjustment: 0,5x3 °down holder: 18 back stop - adjustable: 750 mmfront stop - adjustable: 1000 mmmain drive: 7,5 kWoil volume: 300 ltotal power requirement: 7,5 kWweight of the machine ca.: 4,5 tdimensions of the machine ca.: 3,7x2,0x1,8 mcutting angle adjustment manuallyblade gap adjustment manuallyangle stopThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Auction-ID: A1-44095-9

Auction-ID: A7-44241-155

Levha genişliği: 2500 mm plaka kalınlığı: 3 mm sütunlar arasındaki mesafe: 2540 mm geri stop - ayarlanabilir: 550 mm toplam güç gereksinimi: makinenin ağırlığı ca.: 2,7 tboyut ca.: 3,2 x 2,5x 1,9 mBu reklamın verisi, LogoTech oHG'nin yazılım çözümü olan ModulMWS ile oluşturulmuştur.

plate thickness: 4 mmblade length: 220 mmpressure: 0 tweight of the machine ca.: 1,5 tdimensions of the machine ca.: 1,6 x 1,7 x 1,6 mtotal power requirement: 2,5 kWCombined notching machine with a fixed 90° angle and an adjustablerectangular notching unit variable up to 200mm length x fixed 100mm width.There are 2 manually adjustable stops with a digital display.Axle length X900mm / Y300mmThere is no stamp holder / punch / hold-down device for this.These parts can be purchased from Boschert.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plaka kalınlığı: 3-4 mm basınç: 0 tKesme uzunluğu: 220 mm tabüle yüksekliği: 900 mm yağ miktarı: 35 lTablo boyutları: 950 x 790 mm toplam güç gereksinimi: makinenin 4 kW ağırlığı ca.: 0,95 makine boyutları ca.: 1,0 x 0,86 x 1,2 mFoot anahtar açısı ayarlaması 30-140 otomatik kesme boşluğu ayarıBu reklamın verileri, LogoTech oHG'nin yazılım çözümü ModulMWS ile oluşturulmuştur.

Manufacturer: BOSCHERTModel: EL 1500 CNC RotationYear: 2000Type: CNC Punching MachineCNC Punching Machine BOSCHERT EL 1500 CNC Rotary Punching Machine for Sheet Metal Punching and Cutting Operations. The machine is equipped with a tool rotation system that allows automatic tool orientation. Compatible with AMADA type tools. Main features:- Punching force: 28 tons- Sheet metal format: 1560 x 3080 mm- Format with repositioning up to 1560 x 9999 mm- Maximum thickness standard sheet: 12 mm- Maximum thickness revotool: 6 mm- X, Y and T controlled axes rotation- Number of Revotool stations: 8- Throughput approx. 200 strokes per minute per 25 mm- Positioning accuracy +/- 0.1 mm- Ball table- Number of grippers: 2- Power supply about 10 kVACondition: Used machine sold according to the seller's description without in-depth functional control. Auction-ID: A1-44030-209

Hydraulic press for climping hydraulic pipes, equipped with all the necessary dies for pipes from 0.5 to 50 mm, never used 0 hours and packed in a wooden crate Overall dimensions: 1000 x 1000 x 1400 mm Weight: 310 kg Auction-ID: A7-43970-228