sac levha çalışması kullanılmış satılık (3,301)

: neu : ca. 12 Wochen ab Auftrags : Italien : 3050 mm: 12 mm: 12 mm: 6.5 mm: 8 mm: 8 mmHardened and polished rollersNumerical control Siemens PGS-Classic with touchscreenCone bending with electronic control and inclination of the bottom rolleroil coolerSimultaneous rotation and roller movementSimultaneous roller and support movementPossibility to bend variable radii (ovals, ellipses, etc.)Hydraulic micro-positioning by the PLC for higher accuracyInfinitely variable speed for roller movementInfinitely variable speed for rotationPrepared for retrofitting supports (up to 5 axes)Prepared for retrofitting loading/unloading stationsPrepared for retrofitting CNC controlsExtra large, double hinged drop endElectronic parallelism system for the synchronization of the rollersHydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more)Double linear guide for the movement ...

: gebraucht : 1988 : 070009 : prompt, Zwischenverkauf v : Deutschland : 1600 €: 1 : 400 mm: 700 mm: 1500 mm: 2050 mm: 820 mm: 1000 mmwith brakewith 2 spare mandrelsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 32480 €: 620.37 €: 1550 mm: 9 mm: 9 mm: 7 mm: 7 mm: 5 mm: 180 mm: 180 mm: 150 mm: 1,5 / 6 m/min: 5.5 kW: 3900 mm: 1150 mm: 1250 mm: 3250 kg4 rollsfullhydraulic drive of upper roll and lower rollhydraulic infeed of lower and side rolldigital read-out of lower and side rolls positionhardened rollsconical bending devicehydraulic load relieving of upper rollhydraulic drop-end bearing2 working speedscentral lubrication systemprotectionagainst overloadmoveable control paneaccording to CE rulesOPTIONAL EQUIPMENT (PRICES ON REQUEST):infinitely adustable speed of rollshydraulic side supporthydraulic top supportNC controlIMPORTANT ISSUES AT CONICAL BENDING:the max. sheet metal thickness isequivalent to 50 % of nominal capacitythe cone length can be max. 30 % oremust be more than 60 % of roll lengthhardened rolls are recommendedThe data for this ad  ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 12630 €: 242.5 €: 0.4 - 2 mm: 200 mm: 300 mm²: 63 mm: 150 m/min: 10 m/s²FESTO pneumatic systemSIEMENS servo drive and control system7’ colour touch screen SIEMENS2 feed rollersOption:Handwheel and Simlinx remote maintenance module € 4.290,--The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 12950 €: 248.64 €: 0.4 - 2 mm: 300 mm: 300 mm²: 63 mm: 150 m/min: 10 m/s²FESTO pneumatic systemSIEMENS servo drive and control system7’ colour touch screen SIEMENS2 feed rollersOption:Handwheel and Simlinx remote maintenance module € 4.290,--The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 21400 €: 410.88 €: 5 mm: 2000 mm: 250 mm: 3000 mm: 750 mm: 1400 mm: 1350 kgMobile control panelHydraulic clamp on centerGearbox motor with brakeMotorized sheet centering systemInside cutting systemThroat depth: 1200 mmAccording to EC safety regulationsOperating manualOPTIONAL EQUIPMENT (PRICES ON REQUEST): 1 spare blade set Flanging attachment with 1 set rollsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 21800 €: 418.56 €: 1270 mm: 5 mm: 5 mm: 4 mm: 5 mm: 4 mm: 4 mm: 3 mm: 130 mm: 130 mm: 130 mm: 5 m/min: 2,2 + 1,1 kW: 3020 mm: 1150 mm: 1110 mm: 2150 kgmotorized roller driveupper and lower roller drivenhydraulic side roll feed3 digital displayshydraulic folding bearingshardened rollersconical bending deviceuser manual in GERMAN or ENGLISHOPTIONAL EQUIPMENT (PRICES ON REQUEST):overhead craneside supportsNC controlvariable speedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Wochen ab Auftragse : Italien : 20960 €: 402.43 €: 40 to: 250 mm: 200 x 20 mm: 1100 x 620 mm: 55 mm: 4,7 - 9,1 mm/s: 45 mm/s: 45 l: 3 kW: 950 mm: 1250 mm: 900 mm: 1000 mm: 750 kg2 holder pins, height 110 mm (higher ones on request)Manual stop 500 mm with millimeter scaleAdjustable speed2 handwheels for adjusting the stroke and retraction pointPrecise hydraulic stroke adjustment, even under pressureTwo-hand operationHuge range of tools, prices on requestALTERNATIVE:Version with CNC controlThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 230188 €: 3 kW: Wechseltisch : 16 mm: 8 mm: 8 mm: 5 mm: 8 mm: 27,9 (mit Absaugung) kW: 4100 x 2070 mm: 4100 mm: 2070 mm: 125 mm: 4064 x 2032 mm: 240 (für 3 - 12 kW) / 400 kg/m²: 3900 (für 3 - 12 kW) / 64 kg: 100 m/min: 100 m/min: 141 m/min: 14 m/s²: +/- 0,05 mm: +/- 0,05 mm: 32 sThe HD-FN has two tables which are automatically switched alternately to enable simultaneous cutting and loading/unloading.The shuttle table is positioned longitudinally, which results in the best possible accessibility for optional loading and unloading systems.Control, laser source and cooling are integrated into the machine. The cutting head has automatic focus adjustment.The system consists of the following components:Shuttle table (positioned longitudinally for best possible accessibility for optional loading and unloading systems)Encapsulated cutting room  ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 188488 €: 3562.42 €: 3 kW: Wechseltisch : 16 mm: 8 mm: 8 mm: 5 mm: 8 mm: 26,4 (mit Absaugung) kW: 3100 x 1525 mm: 3100 mm: 1525 mm: 125 mm: 3084 x 1524 mm: 240 (für 3 - 12 kW) / 400 kg/m²: 2200 (für 3 - 12kW) / 360 kg: 100 m/min: 100 m/min: 141 m/min: 14 m/s²: +/- 0,05 mm: +/- 0,05 mm: 25 sThe HD-FN has two tables which are automatically switched alternately to enable simultaneous cutting and loading/unloading.The shuttle table is positioned longitudinally, which results in the best possible accessibility for optional loading and unloading systems.Control, laser source and cooling are integrated into the machine. The cutting head has automatic focus adjustment.The system consists of the following components:Shuttle table (positioned longitudinally for best possible accessibility for optional loading and unloading systems)Encapsulated  ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 111500 €: 2107.35 €: 3100 mm: 20 mm: 20 mm: 16 mm: 16 mm: 12 mm: 350 mm: 350 mm: 260 mm: 1,5-5 m/min: 22 kW: 6000 mm: 2200 mm: 1900 mm: 15000 kg4 rollsfullhydraulic drive of upper roll and lower rollhydraulic infeed of lower and side rolldigital read-out of lower and side rolls positionhardened rollsconical bending devicehydraulic load relieving of upper rollhydraulic drop-end bearing2 working speedscentral lubrication systemprotectionagainst overloadmoveable control paneaccording to CE rulesOPTIONAL EQUIPMENT:infinitely adustable speed of rollshydraulic side supporthydraulic top supportNC controlIMPORTANT ISSUES AT CONICAL BENDING:the max. sheet metal thickness isequivalent to 50 % of nominal capacitythe cone length can be max. 30 % oremust be more than 60 % of roll lengthhardened rolls are recommendedThe data for this ad was created wit ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 59600 €: 1126.44 €: 3100 mm: 10 mm: 6 mm: 50 mm: 13 1/min: 1.5 °: 16 : 22 to: 1000 mm: 200 mm/s: 22 kW: 200 l: 2 Stk.: 865 mm: 580 mm: 3515 mm: 4200 mm: 2250 mm: 3600 mm: 2100 mm: 9300 kgSwing cut constructionNC-preselection system D-touch 7 with touch screen for back gauge, cutting length, quantity, USB portMotorized back gauge 1000 mm on ball screws, folding upwardsClear control panel mounted on moveablearmHydraulic hold down pistons are arrangedclose to the cutting edgeFoot switchCentral, manual blade gap adjustmentCutting line illuminationBroad table with ballsPiece counterSingle and continous stokeFold up finger guard 1.000 mm1 squaring arm 1. 500 mm with scale,T-slot and tilting cam2 supporting arms 1.000 mm with T-slotSimple replacement and grinding of thebladesVariable adjustable cuttinglength for economic processingLower blade f ...

throat: 1100 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

material width: 650 mmcoil weight: 15 tmaterial thickness: 16 mmThe year of construction is estimated, the system is as good as newThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1.250 mmplate thickness: 1,0 mmcutting speed: 10 m/minblade shaft - diameter: 70 mmWorking width: 1,250 mmSheet thickness, steel: max. 0.8 mm with 3 pairs of knivesSheet thickness, copper: max. 1.0 mm with 3 pairs of knivesKnife shaft: Ø 70 mmNumber of knife pairs: 3Cutting / feed speed: approx. 10 m/minPower supply: 380 VEquipment:Manual longitudinal and cross-cutting line for sheet metal strips with rubber transport rollers.Knife shaft Ø 70 mm3 pairs of knivesLength measuring device with measuring scaleAutomatic and manual operationBrake motorManual rotary shear for cross-cuttingThe RULI 120 / SBVA is a longitudinal and cross-cutting line designed for processing sheet metal strips. The machine enables longitudinal slitting and cutting to length and is particularly suitable for processing thin sheet metal.The sheet material is fed to the knife shaft via rubber transport r ...

tube: 6000 mmtube diameter: 42 x 3,0 mmwall strength: 3,0 mmbending radius min.: 150 mmtotal power requirement: 5,5 kWweight of the machine ca.: 1,2 tdimensions of the machine ca.: 7500 x 1.400 x 1.300 mRound steel tube: up to Ø 42 × 3.0 mmRound stainless steel tube: up to Ø 42 × 2.0 mmSquare tube: 25 × 2.5 mmMax. section modulus: 4.1 cm³Bending angle: up to 180° + 10° overbendingBending time at 90°: 2.7 sec. (forward stroke)Longitudinal feed speed: 450 mm / 1.5 sec.Rotary positioning speed at 90°: 1.0 sec.Repeatability of bending axis: ± 0.2°Controlled length tolerance: ± 0.3 mmControlled rotation tolerance: ± 0.2°Tube loading length / usable length for mandrel bending: 4,100 mmMax. radius range: 150 mmBending height: 850 mmFree-standing bending head: 850 mm longBending axis drive: electro-hydraulicRotation and length positioning: automatic via geared motorsBending direct ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 27800 €: 530.98 €: 3030 mm: 4 mm: 4 mm: 2 mm: 180 mm: 4 kW: 4600 mm: 1120 mm: 1020 mm: 4250 kg3 rollsAsymmetrical rolls arrangement - with pre-bending2 driven rollsMotorized adjustment of lateral and clamping rollDigital read-out for lateral and clamping rollSwiveling top roll to the frontForward/reverse runHardened rollsMoveable control panelUser manual in GERMAN and ENGLISH(sample photo)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 48100 €: 918.71 €: 2550 mm: 9 mm: 9 mm: 7 mm: 7 mm: 5 mm: 220 mm: 220 mm: 160 mm: 1,5 / 6 m/min: 5.5 kW: 4900 mm: 1150 mm: 1250 mm: 4600 kg4 rollsTop rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan systemPinch roll and latereal rolls move with hydraulic cylindersDigital read-out for lower and side rolls positionHardened rollsConical bending deviceHydraulic load relieving of upper rollHydraulic drop-end bearing2 working speedsProtectionagainst overloadMoveable control paneAccording to CE rulesOPTIONAL EQUIPMENT:Infinitely adustable speed of rollsHydraulic side supportHydraulic top supportNC controlIMPORTANT ISSUES AT CONICAL BENDING:The max. sheet metal thickness isequivalent to 50 % of nominal capacityThe cone length can be max. 30 % oremust be more than 60 % of roll lengthHardened rolls are recomme ...

: neu : 2023 : 9656 : prompt, Zwischenverkauf v : Türkei : 2600 €: 1 : 1 : 1050 mm: 1 mm: 56 mm: 1400 mm: 700 mm: 1120 mm: 185 kg3 Walzenasymmetric rolls - prebendinglongitudinal grooves in lower and lateral rollInfeed of the lower roller by a central lever - with gear reductionmachine standuser manual in GERMAN orENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 46300 €: 884.33 €: 2050 mm: 11 mm: 11 mm: 9 mm: 9 mm: 7 mm: 220 mm: 220 mm: 160 mm: 1,5 / 6 m/min: 5.5 kW: 4400 mm: 1150 mm: 1250 mm: 4080 kg4 rollsTop rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan systemPinch roll and latereal rolls move with hydraulic cylindersDigital read-out for lower and side rolls positionHardened rollsConical bending deviceHydraulic load relieving of upper rollHydraulic drop-end bearing2 working speedsProtectionagainst overloadMoveable control paneAccording to CE rulesOPTIONAL EQUIPMENT:Infinitely adustable speed of rollsHydraulic side supportHydraulic top supportNC controlIMPORTANT ISSUES AT CONICAL BENDING:The max. sheet metal thickness isequivalent to 50 % of nominal capacityThe cone length can be max. 30 % oremust be more than 60 % of roll lengthHardened rolls are recom ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 68700 €: 1298.43 €: 3100 mm: 13 mm: 8 mm: 50 mm: 13 1/min: 1.75 °: 16 : 37 to: 1000 mm: 200 mm/s: 30 kW: 330 l: 2 Stk.: 840 mm: 600 mm: 3550 mm: 4280 mm: 2300 mm: 3600 mm: 2350 mm: 12500 kgSwing cut constructionNC-preselection system D-touch 7 with touch screen for back gauge, cutting length, quantity, USB portMotorized back gauge 1000 mm on ball screws, folding upwardsClear control panel mounted on moveablearmHydraulic hold down pistons are arrangedclose to the cutting edgeFoot switchCentral, manual blade gap adjustmentCutting line illuminationBroad table with ballsPiece counterSingle and continous stokeFold up finger guard 1.000 mm1 squaring arm 1. 500 mm with scale,T-slot and tilting cam2 supporting arms 1.000 mm with T-slotSimple replacement and grinding of thebladesVariable adjustable cuttinglength for economic processingLower blade ...

: neu : ca. 12 Wochen ab Auftrags : Italien : 2000 mm: 18 mm: 18 mm: 12.1 mm: 15 mm: 13 mmHardened and polished rollersNumerical control Siemens PGS-Classic with touchscreenCone bending with electronic control and inclination of the bottom rolleroil coolerSimultaneous rotation and roller movementSimultaneous roller and support movementPossibility to bend variable radii (ovals, ellipses, etc.)Hydraulic micro-positioning by the PLC for higher accuracyInfinitely variable speed for roller movementInfinitely variable speed for rotationPrepared for retrofitting supports (up to 5 axes)Prepared for retrofitting loading/unloading stationsPrepared for retrofitting CNC controlsExtra large, double hinged drop endElectronic parallelism system for the synchronization of the rollersHydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more)Double linear guide for the movem ...

: gebraucht : 2021 : 9502 : Türkei : 2200 €: 1 : 1050 mm: 2 mm: 75 mm: 1930 mm: 700 mm: 1160 mm: 300 kgMINT CONDITION3 rollsasymmetric rolls - prebendinglongitudinal grooves in lower and lateral rollInfeed of the lower roller by a central lever - with gear reductionmachine standuser manual in GERMAN orENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 70300 €: 1328.67 €: 3100 mm: 8 mm: 8 mm: 6 mm: 6 mm: 5 mm: 240 mm: 240 mm: 190 mm: 825 mm: 11 kW: 4880 mm: 1160 mm: 1200 mm: 6450 kg4 rollsfully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear boxhydr. side rolls positioning with electronical synchronisationhydr. lower roll feed with mechanical synchronisationadjustable pinching pressurevariable rolling speedhardened rollsconical bending devicehydraulic drop-end bearingmoveable control paneloverload protectionuser manual in GERMAN or ENGLISHaccording to CE rulesOPTIONAL:NC controlupper and lateral supportsIMPORTANT ISSUES AT CONICAL BENDING:the max. sheet metal thickness isequivalent to 50 % of nominal capacitythe cone length can be max. 30 % oremust be more than 60 % of roll lengthhardened rolls are recommendedThe data for this ad wa ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 95000 €: 1795.5 €: 3100 mm: 13 mm: 12 mm: 8 mm: 13 mm: 10 mm: 10 mm: 8 mm: 270 mm: 270 mm: 230 mm: 50 mm: 1155 mm: 15 kW: 5310 mm: 1660 mm: 1590 mm: 10050 kg4 rollsfully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear boxhydr. side rolls positioning with electronical synchronisationhydr. lower roll feed with mechanical synchronisationadjustable pinching pressurevariable rolling speedhardened rollsconical bending devicehydraulic drop-end bearingmoveable control paneloverload protectionuser manual in GERMAN or ENGLISHaccording to CE rulesOPTIONAL:NC controlupper and lateral supportsIMPORTANT ISSUES AT CONICAL BENDING:the max. sheet metal thickness isequivalent to 50 % of nominal capacityThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 83800 €: 1583.82 €: 2550 mm: 15 mm: 15 mm: 13 mm: 12 mm: 12 mm: 10 mm: 270 mm: 270 mm: 230 mm: 50 mm: 1155 mm: 15 kW: 4760 mm: 1660 mm: 1155 mm: 8950 kg4 rollsfully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear boxhydr. side rolls positioning with electronical synchronisationhydr. lower roll feed with mechanical synchronisationadjustable pinching pressurevariable rolling speedhardened rollsconical bending devicehydraulic drop-end bearingmoveable control paneloverload protectionuser manual in GERMAN or ENGLISHaccording to CE rulesOPTIONAL:NC controlupper and lateral supportsIMPORTANT ISSUES AT CONICAL BENDING:the max. sheet metal thickness isequivalent to 50 % of nominal capacitythe cone length can be max. 30 % oremust be more than 60 % of roll lengthhardened rolls are recommendedThe ...

: gebraucht : WA0138 : 1960 €: 1 : 3100 mm: 200 mmslightly crankedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0032 : 228 €: 1 : 835 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 52700 €: 996.03 €: 2550 mm: 10 mm: 10 mm: 8 mm: 8 mm: 6 mm: 245 mm: 245 mm: 180 mm: 1,5 / 6 m/min: 7.5 kW: 4800 mm: 1600 mm: 1470 mm: 6170 kg4 rollsTop rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan systemPinch roll and latereal rolls move with hydraulic cylindersDigital read-out for lower and side rolls positionHardened rollsConical bending deviceHydraulic load relieving of upper rollHydraulic drop-end bearing2 working speedsProtectionagainst overloadMoveable control paneAccording to CE rulesOPTIONAL EQUIPMENT:Infinitely adustable speed of rollsHydraulic side supportHydraulic top supportNC controlIMPORTANT ISSUES AT CONICAL BENDING:The max. sheet metal thickness isequivalent to 50 % of nominal capacityThe cone length can be max. 30 % oremust be more than 60 % of roll lengthHardened rolls are recom ...

: gebraucht : WA0149 : 690 €: 1 : 3010 mm: 24 mm: 160 mm: 10 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.