meyve sebze şarküteri hazır yemek makineleri kullanılmış satılık (265)

Round filling table with stainless steel attachment, table diameter: approx. 1,800 mm,, Diameter of the filling openings: approx. 68 mm,, with hinged plate conveyor for supply and removal: approx. 4,400 mm long.

Sprinkler pasteurizer,, Usable length: approx. 13,500 mm,, Usable width: approx. 2,000 mm,, with heat exchanger,, with fan in the outlet,, power: approx. 3,500 glasses / hour, detección automática de velocidad de transmisión: approx. 3,500 glasses / hour

used for dried apple products, Format set for stand-up pouches with a surface area of approx. 100 x 60 mm available., consisting of:, Vibration - Shaking Table for the task of filling the products, Z-Elevator, Blue smooth belt with carriers Usable width: approx. 380 mm, Belt length straight inlet: approx. 1,200 mm Overhead conveyor section: approx. 2,660 mm, Straight section above: approx. 1,200 mm Carrier height: approx. 65 mm Distance between carriers approx. 200 mm Feed height: approx. 430 mm, With corresponding stainless steel frame, Multihead weigher Ishida Optima CCW-EM-214, built in 2003, 14 heads, mounted on base frame, operator unit, digital display, printing unit,, Z-Elevator, same design as described above, Form-fill-wrapping machine Kopas JK 200 F-M-R Servo, year 2017

Dimensions: 3.5 x 7m, Electricity: 9x 230v sockets and one 16A socket, Light: available, shatterproof (food standard), Ventilation: Large, professional ventilation system with filters. Supply air damper also with filter. Additional insulated exhaust duct for connecting a portable air conditioner (not included)., Sink/Water: Mobile sink from Calosy with shower, hot water, tanks for fresh water and waste water., Floor: Currently directly on the hall floor. Custom flooring can be installed if the existing hall floor is unsuitable., Door: 118cm wide, also fits wide pallets., Materials + surfaces: Clean room made of wood (solid carpentry), stainless steel surfaces, easy to clean., Upper floor + stairs: accessible, storage and workstations possible, stairs approved by the employers liability insurance association (steepness, height, steps)., General standard: 100% food-safe; this room was prod ...

for dosing sauerkraut or red cabbage into flow packs (without flow pack machine),, Dosage 250 g to 500 g Speed of the screw dosing frequency controlled,, 40 beats per minute possible,, different programs can be saved., power: up to 40 cycles / min, and a: up to 40 cycles / min, Materials + surfaces: Clean room made of wood (solid carpentry), stainless steel surfaces, easy to clean.: up to 40 cycles / min

The treatment tank is designed to prevent fruit oxidation and is ideal for processing apples, pears, pineapples, melons, oranges and other types of whole and cut fruits., Blue plastic link belt with attached carriers,, Usable width: approx. 1,100 mm,, Usable length: straight section: approx. 1,700 mm, rising section: approx. 1,250 mm,, Driver height: approx. 80 mm, distance between the drivers: approx. 150 mm,, Feed height: approx. 1,070 mm,, Discharge height: approx. 1,120 mm,, Fan in the outlet,, With side-mounted dosing system (screw) Overall dimensions: approx. 4.5 x 1.8 m., From the manufacturer’s :, Thanks to the optional conductivity regulator and dosing system, the tank is an excellent ally in fruit processing. Combined with your preferred fruit preservation liquid, excellent results can be achieved, including protecting flavors and avoiding the risk of oxidation. The system ha ...

The ABL PDS 50 TT is a powerful, fully automatic apple slicing and peeling machine designed for industrial fruit processing. It combines efficiency, flexibility, and reliability—perfect for producers of fresh slices, IQF products, apple rings, chunks, cider, or applesauce., Fully automatic alignment of the fruit, combined with peeling, coring and cutting processes – all in one pass., Versatile cutting options:, - Whole, cored apples, - Segments of 2 to 18 equal pieces, - Chunks, butterflies, discs or rings (3–15 mm thick), Ideal for:, - Producers of Fresh fruit, IQF or dried apple products, - Manufacturer of Apple rings and chunks for gastronomy and retail, - Provider of Cider, applesauce, compote or juices, - Contract packer and fruit traders who want to combine efficiency and quality, power: Output up to 50 apples/min (approx. 250–500 kg/hour) with consistently high quality, W ...

Linear runner for applying sign or wrap-around labels (wet glue) to cylindrical containers., Perfomance:, approx. 25-100 labelings/min freely adjustable via frequency converter, Design type:, Left-hand machine (The overlapping direction of the wrap-around labels depends on this), gluing:, 210 mm brass glue roller with quick change device with one pitch, from 19 to 3 mm (horizontal stripe gluing over the entire length of the label), label magazine:, Up to 3,500 labels with a length of 80-380mm, Working height of the conveyor belt:, 1,000mm, adjustable +-50mm, Carrier:, 80.5mm chain, length approx. 3m/ with snail, glue supply:, pleumatic glue pump with heating, Paintwork:, light gray Ral 7042, unless stainless steel, Electrical equipment according to VDE regulation: 400 volts, 3 phases, 50 Hz, control voltage 24, Volts / PLC Siemens, Degree of protection: IP-54, Connection value: approx. 0 ...

This machine automatically places a cloth or paper doily on the glass and usually secures it with a rubber band or string., Capacity: approx. 30 glasses / min,, The machine requires compressed air, oil and water free., power: approx. 30 glasses / min

Sorting, cleaning, blanching and peeling system for carrots and beetroot, manufactured by Komen & Kuin, Blancheur capacity:, 10 tons of carrots per hour up to 80°C,, 5 tons of beetroot per hour up to 80°C,, Maximum throughput time: 35 minutes, Dimensions, approx.:, Height: 3.50 m, Width: 3.20 m, Length: 8.20 m, matching:, 1) Sorting machines for beetroot, celery, etc. …., already sold, 2) Washing machines, Washing machine 1: Drum diameter approx. 80 cm,, Distance between the bars approx. 5 mm,, Drum length approx. 200 cm, Washing machine 2: Drum diameter approx. 90 cm,, Distance between the bars approx. 10 mm, Drum length approx. 300 cm, 3) Stoner, 4) Heat exchanger, 5) various climbing belts, 6) Read the volume, 7) various pipes, 8) Various pumps

Fully automatic labeling machine for self-adhesive labels K7,, Hourly output 500-800 labels / h, compact and on wheels, ideal for low power, space-saving, Standard equipment:, • Station for body labeling with brake motor, • Control panel with potentiometers, • Equipped for cylindrical glasses, bottles and smooth cans, • Monoblock construction in stainless steel, • Working direction from left to right, • Possibility to put in line, • Fixed bottle collection table 40x50cm, • Power connection 400 volts 50 Hz., • CE protections and user manual, • additional equipment front and back labels from the same roll incl. •, Weight: 200.00 kg, power: 500-800 labels / h

FAM piston filling machine for pasty products,, below level filling,, rotary machine with 10 stations,, Cylinder diameter: approx. 100 mm, cylinder length: approx. 390 mm,, Piston: diameter: approx. 100 mm, height: approx. 250 mm,, set up for container diameter: approx. 56 mm,, 2 sets of filling nozzles: filling opening 11 and 17 mm, filling tube length: approx. 162 mm,, Plastic conveyor belt, belt width: 85 mm,, Overall dimensions: 2,750mm x 1,500mm x 2,400mm., With pallet with s/s tank and control cabinet,, Internal tank dimensions: Ø 580 m x 690 mm,, Tank dimensions: 770 mm x 600 mm x 1570 mm,, Dimensions control cabinet: 800 mm x 600 mm x 2100 mm, and with trolley with parts,, Dimensions trolley: 1150 mm x 600 mm x 950 mm and pallet with parts,, without a platform, which can be seen in some pictures.

Slitting device for Ferrum Entsteinmaschine, type EA,, equipped with 25 new circular knives,, suitable for plates with 50 holes, e.g. 34/20 (plums), With this device, the fruits, which are still divided during pitting, are cut on the underside by the scoring knives. As a result, the fruits are not injured when the stone is ejected.

Slitting device for Ferrum Entsteinmaschine, type EA,, equipped with 25 new circular knives,, suitable for plates with 50 holes, e.g. 34/20 (plums), With this device, the fruits, which are still divided during pitting, are cut on the underside by the scoring knives. As a result, the fruits are not injured when the stone is ejected.

4 capping stations,, used for plastic closures with Pilver Proof,, Outer diameter: approx. 31.5 mm,, Dimensions / weight: L x W x H: approx. 1,900 mm x 1,400 mm x 2,430 mm

2-position pneumatic piston filling machine as an add-on dispenser, Filling volume: up to 250 ml, Output: up to 2,000 containers per hour, Frame: stainless steel, Dimensions: approx. L x W x H = 1,200 x 1,000 x 1,400 mm, Connection value: 380Vac, 50Hz,, Compressed air > 6 bar, Miscellaneous: bottle stop with positioning device (the bottle is filled in 2 stages), Stainless steel control cabinet, Storage tank with V2A lid and agitator, the system was overhauled in 2014 by Lenssen in Holland and equipped with a new control system. It was used to fill glass bottles with salad dressing., filling volume: up to 250ml, Filling volume: up to 250ml, a slight vacuum is drawn and the pouch sealed.: up to 250ml

Continuous tunnel cooler with short heat-holding section, make Steiner, type TP 900/5000, year of manufacture 2012, for the continuous pasteurization/cooling of hot-filled products, such as jam, marmalade, dips, seasoning sauces or spreads in jars,, Usable belt width: 900 mm,, Usable tape length: approx. 5,000 mm,, Adjustable throughput times: 11.26 - 49 minutes,, Nominal throughput time: 29 minutes,, 4 circulation pumps (1.1 kW),, Holding zone (5min), 3 cooling zones (each 8 minutes),, Max. container throughput height: 220 mm,, energy consumption at cont. Operation: approx. 70 kg steam / h,

Packaging system, make Meypack, type VP452, year of construction 2006, Type of packaging: tray, tray/lid, Maximum output: 30 packs/min., Machine data:, Inlet height: 1,150 mm, Outlet height: 650 mm, Dimensions of the possible multipack:, L x W x H: 200-400mm x 120-300mm x 80-350mm, Cutting dimensions: L x W: 360 – 1,400 mm x 300 – 700 mm with Nordson hot melt device, ProBlue P/N213 544C

Stephan UM44-S Evrensel Makinesi İki vites, 1410 + 2820 rpm + motor freni! İmtüs anahtarlı membran klavye bıçak girişli İşlenen ortamın çıkarılması için makine eğilebilir Makine iyi durumda ve her iki hızda da düzgün, akıcı çalışıyor, ancak kullanmadan önce iyice temizlenmelidir Test çalışması hakkında video mevcut

İki adet aynı Steiner pişirme kettle'i mevcuttur. Üretim yılları: 2009/2010, Hacim: 300l, Isıtma türü: buhar, Maksimum buhar basıncı: 10bar, Çaydanlık çapı: yaklaşık 1000mm, Çaydanlık derinliği: yaklaşık 500mm, Makine boyutları X/Y/Z: yaklaşık 1950mm/1200mm/1200mm, Ağırlık: yaklaşık 200kg. Belgeler mevcut. Sahada inceleme yapılabilir.

Stephan UM44-3 Evrensel Makine Çift kat Sıcaklık sensörü Zamanlayıcı Vakum Pompası ve Kurulumu Kapağa bir besleme cihazı veya basınç verme valfi monte etmek için kubbe 3 Hızlı Bıçak girişi + karışık iç Vakum pompası için yağ ve kullanım kılavuzu

Mesutronic Metal detector with sorter, type: FC 01 BA 3.1.1, serial number: 1013 FC, year of manufacture: 2013, 230 V, 50 Hz, plastic belt, belt width: 80 mm, pass-through: 130 mm x 205 mm, overall dimensions: 2050 mm x 990 mm x 1500 mm., Safeline Metal detector with exchanger, passage: 200 mm x 350 mm, plastic belt, belt width: 120 mm, overall dimensions: 1600 mm x 900 mm x 1650 mm., Metal detector by Thermo Electron Corporation, Serial number: 06132547, plastic band, band width: 260 mm, passage: 300 mm x 100 mm, overall dimensions: 1200 mm x 900 mm x 1500 mm., Metal detector of the Thermo Electron Corporation , Model: SPECGKDSP3NAS, Serial number: 6277, Year of construction: 2005, plastic band, band width: 250 mm, passage: 300 mm x 100 mm, overall dimensions: 1400 mm x 1100 mm x 1500 mm., Goring Kerr Limited mobile pipeline metal detector, Type: D.S.P2, Serial number: 57423, Year of ma ...

Gıda endüstrisi için Jumag buhar sistemi içeren bir otoklav Stok DFT mevcuttur. Parti araba kapasitesi: 2, süreç yöntemi: buhar-su püskürtme, uygulama: sterilizasyon/pastörizasyon, brüt hacm: yaklaşık 1550l, buhar sistemi: Jumag DG560, buhar çıkışı: yaklaşık 560kg/saat. 6 parti tramvay dahil. Belgeler mevcut. Sahada inceleme yapılabilir.

Alexanderwerk AWK15.3 Patates soyma makinesi kullanılıyor bıçak soyma diski ile Makine düzenli durumda Bıçaklar kendiniz sökülüp yeniden bilemenizi sağlayabilir Test çalışması hakkında video mevcut

4 adet mevcut,, Kullanılabilir uzunluk: yaklaşık 4.900 mm,, Kullanılabilir genişlik: yaklaşık 1.115 mm,, çerçeve: paslanmaz çelik,, Stöber dişli motoru tipi K21R 90 S4, 1.1 kW., kullanılabilir uzunluk: yaklaşık 4.900 mm,, kullanılabilir genişlik: yaklaşık 1.115 mm,, Çerçeve: Paslanmaz çelik,, Faydalı uzunluk: yaklaşık 4.900 mm,

Product: Mung bean seedlings, Entry temperature product: 10 – 15° C, Initial product temperature: 80 – 85° C, Perfomance: 1,000kg/hour, Determination: Blancheur is for the process of thermal treatment of vegetables, and fruit definitely, Working principle:, The product is fed in by the operator. The operator ensures an even, Distribution on the band. Blanching is done by spraying with warm water, Connection of the required belt speed. To maintain and improve the, To ensure the quality of the water, the circulating water is permanently cleaned using a stainless steel filter sieve., Technical specifications:, Total length: approx. 5,000 mm, Height: approximately 2,500 mm, Width: approx. 1,500 mm, Band width: 800 mm, Performance: up to 1 000 kg / h, Drive: 1.5 kW, Steam consumption: approx. 150 - 250 kg/t product, Blancheur consists of the following components:, · modular transportin ...

kesme makinesi için 122 N:, 91 bıçak ile tamamlanmış dairesel bıçak mili - 2.8 mm kesim, Düz bıçak - bıçaksız tutucu için 2.8 mm kesim, Yuvarlak bıçak - somunlu şaft, bıçaksız, 10 mm küpler için 28 öğütücü, Tam liste talep üzerine

Line for filling delicatessen products into plastic - trays, consisting of:, Vessel filling system, brand Waldner, type 12.3, year 2011, 2-track (2 different formats) – however, only single-track operation is possible., Format section 1: Round cup diameter 100mm (including edge) height 80mm and 60 mm, Format section 2: rectangular cup 185mm long 135 mm wide (incl. edge) 35mm deep, The shells are sealed with film from the roll, Roll magazine about 500mm long, 400mm wide, Space requirement Waldner: approx.: 2,100 m 2,100 mm, Discharge belt of Waldner: approx 1,800 mm, Dosing of liquid and free-flowing components:, The plant has two filling heads, which are filled via piping directly from the boiler., The pipe system can be fully purged., The toad line and Maso – Sinus Pump, type SPS 3, are included in the scope of delivery., Feeding of the multi-head weigher using two belt conveyors:, ...

New machines, delivered in 2024 and 2025, not connected and not commissioned, are for sale., Homegrown organic produce should be processed. The production has a handcrafted feel. Juices, jams, spreads, salads, herbs, dried, and flash-frozen products can be produced., Among other things, a jar filling line equipped for three jar formats with a capacity of approximately 2,500 jars per hour is for sale. It also includes cooking equipment for jams, a pasteurization tank for juices, washing systems for fruit, vegetables, and salads, two rack dryers, a blast freezer, and much more., Here you can find the machine list:, .florin-machines/epona, A short overview list in Excel, the general terms and conditions, and the bid sheet for submitting your bids can be downloaded using the corresponding links below.