torna kullanılmış satılık (3,149)

number of spindles:6 spindle passage:18 mmturning length:63/50 mmweight of the machine ca.:8,6 tspindle drive motor:11 kW

THIS GILDERMEISTER CTX 310 HAS ONLY MACHINED PLASTIC! Machine is equipped with: - chip conveyor - tail stock - C-axis 0,001° - live tooling (4500rpm) - Siemens ShopTurn Auction-ID: A1-50690-7

turning diameter:200 mmturning height:120 mmweight of the machine ca.:18 tAvailable from 01.08.2024

Center height 160 mm, center width 650 mm, MK 3 tailstock, connected load 3 kW, nominal current drive motor 7 A, incl. digital display, MULTIFIX \"A\" base holder, GARANT 160 three-jaw chuck, interchangeable jaws and interchangeable wheels Auction-ID: A1-50626-10

turning diameter:1000 mmswing diameter:1000 mmMachine type: Vertical latheManufacturer: HessappType: DV 62Serial no.: 14.2308Working range of the spindleLargest diameter 1000 mmLargest swing diameter 1000 mmCross slide travelStroke of the vertical slide 900 mmStroke of the horizontal slide 1810 mmTotal travel 2315 mmTurning spindleSpindle head with centering cone according to DIN 55021 A15Spindle diameter in the front bearing 203 mmMain driveVia a controlled asynchronous motor and gear transmissionwith range switching.Spindle speedsSpeed range I: 5 - 350 rpm.Speed range II: 30 - 1000 rpm.Travel speedX/Z axis: 10 m/min.W1 axis: 8 rpmNo C-Axis

TEACH IN LATHE Inv. No. 11.581C1 Make CAZENEUVE Model HBCN S575 Year 1995 Mach.no. 9810 Control SOMAB PL+S3 Centre Distance 1.500 mm Max. Swing over Bed Ø 575 mm Max. Swing over Cross Slide Ø 300 mm Centre Height Ø 250 mm Spindle Bore Ø 51 mm R.P.M. 2 ranges 0 – 3000 kW 18,5 Volts 400 Cycles 50 Auction-ID: A1-50718-22

faceplate diameter:800 mmpower requirement:110 kWweight of the machine ca.:37.000 / total 52.000 ttransport measurements machine:5,07 x 2,98 x 3,90 mclamping diameter:800 mm:Ø 800 x 720 mmTool bore:Capto C6 tools in tool magazin:2 x 80 With C-Axis

USED OKUMA LCC15 2S CNC LATHESerial No.: 0311Year: 12/1998Mainspindle Max diameter above bed: 200 mmDiameter above carriage: 320 mmMax turning diameter: 260 mmSpindle speed: 35-4200 rpmChuck clamping Ø160mm - 3 jawsTurret2 Turret / 8 stationsEquipped with1 CN OKUMA OSP1 Chip conveyorDimensions and weight4400x2000xH2400mm - weight 5000 kg Auction-ID: A1-50950-63

Machine is equipped with: - chip conveyor - tailstock - tool setter - 254mm chuck Mistfilter not included! Auction-ID: A1-50690-9

faceplate diameter:1600 mmpower requirement:80 kWweight of the machine ca.:25 tdimensions of the machine ca.:4,4 x 4,62 mmax. workpiece diameter:2000 mmmax. diameter of face turning:1800 mmtool taper:ISO50 The machine has been regularly serviced and is in good technical condition. With C-Axis

USED BIGLIA B445 S2M CNC LATHE SerialNo.: 6922Year: 2001Mainspindle Max. bar diameter: 45 mmMax. turning diameter: 240 mmMax. turning length: 320 mmSpindle nose: ASA5Spindle speed: 5000 rpmSub-spindleSpindle nose: ASA5Spindle speed: 5000 rpmUpper turretNumber of positions: 12Number of motorized positions: 12Axis travel: X: 170 mm - Z: 400 mmLower turretNumber of positions: 12Number of motorized positions: 12Axis travel: X: 170 mm - Z: 400 mmEquipped with1 FANUCNC 1 Clamping on the main spindle and on the sub-spindle1 Workpiecerecuperator 1 Chip conveyor1 IEMCA BOSS 545E bar feederDimensions and weightMachine: 4800x2000xH2000mm - Bar feeder: 4000x800xH1300mm - Total weight: 5800 kg Auction-ID: A1-50950-2

USED TORNOS ENC 16 CNC latheSerial No.: 58145Year: 1990Equipped with1 SIEMENS SINUMERIKCN Rotatingtools 1 TORNOS bar feederMachine dimensions and weight: 2300x1200xH1600mm - weight 2500kg - bar feeder: 5000x700xH1300mm - weight 800kg Auction-ID: A1-50950-76

USED FAMAR ERGO 250 CNC latheSerial No.: 20.68Year: 2001Machinablepart Diameter: 200mmMax. length on turret: 125 mmMax. tool block length: 200 mmAxlesAxis strokes: X: 340 - Z: 215 mmFast feeds: X: 60 - Z: 30 m/minBall screw diameter: 40 mmSpindleSpindle nose: 6\" Spindle power S6: 30 kWSpeed: 6000 rpmMax centering diameter: 350 mmEquipped with1 CN SIEMENS SINUMERIK1 Chip conveyorDimensions and weightMachine: 2460x1950xH2680mm - conveyor: 4000x1400mm - Total weight: 7000 kg + 7 pallets Auction-ID: A1-50950-13

USED BIGLIA B445 S2M CNC LatheSerial No.: 8272Year: 2005Mainspindle Max bar diameter: 45 mmMax turning diameter: 240 mmMax turning length: 320 mmSpindle nose: ASA5Spindle speed: 5000 rpmSub-spindleSpindle nose: ASA5Spindle speed: 5000 rpmUpper turretNumber of positions: 12Number of motorized positions: 12Axis travel: X: 170 mm - Z: 400 mmLower turretNumber of positions: 12Number of motorized positions: 12Axis travel: X: 170 mm - Z: 400 mmEquipped with1 FANUC 18i-TBCNC 1 Parts reclaimer 1 ChipconveyorDimensions and weightMachine:4800x2000xH2000mm / weight: 5000 kg Auction-ID: A1-50950-3

turning diameter:270 -300 mmturning length:710 mmtotal power requirement:43 kWweight of the machine ca.:8,5 tdimensions of the machine ca.:3,16 x 2,15 x 2,15 mThe machine does not include a chuck or tools ? the machine was originally purchased without these accessories. The G300 has X, Z, Y, C, SP, and driven tools. A bar feeder can be used, but the machine does not have one.

Machine is equipped with: - chip conveyor - tailstock - tool setter - collet chuck - mist filter Auction-ID: A1-50690-10

turning diameter:220 mmturning length:310 mmtotal power requirement:17 kWweight of the machine ca.:3,3 tdimensions of the machine ca.:2,25 x 1,63 x 1940 mgreates pass round over bed:430 mmbore diameter:45 mmcentre distance:687 mmslide travel radial ( X-axis ):160 mmslide travel axial ( Z-axis ):310 mmspindle turning speed range:0-6.300 U/min

turning diameter:220 mmturning length:700 / 665 mmtotal power requirement:17 kWweight of the machine ca.:2,6 tdimensions of the machine ca.:2,63 x 1,98 x 1,94 mgreates pass round over bed:430 mmPart length max.:510 slide travel radial ( X-axis ):160 mmbore diameter:45 mmTexte, Bilder, Grafiken, Layout, Strukturen und Algorithmen etc. unterliegen weltweitem Urheberrecht.Unerlaubte Verwendung der Daten, werden sowohl strafrechtlich als auch zivilrechtlich verfolgt.Das ausschließliche Urheber- / Nutzungsrecht dieser Daten wurde nachfolgender Person eingeräumt.Copyright © 2005-2026, Josef Weber. All rights reserved.

turning diameter:360 mmturning length:520 mmtotal power requirement:20 kWweight of the machine ca.:3,8 tdimensions of the machine ca.:3 x 2 x 2 m

USED NAKAMURA SUPER NTM3 CNC latheSerial No.: L152501Year: 2011Mainspindle Bar diameter: 65 mmMax turning diameter: 190 mmSpindle speed: 4500 rpmSpindle power: 15 kWC-axis: 0.001° indexing increment SpindleSpindle nose: A2-6Spindle speed: 5000 rpmC-axis: 0.001° indexing increment Left upper turretNumber of positions: 24Number of motorized positions: 12Axis travel: X=167.5mm - Y=102 mm Z=250 mmUpper rightturret Number of positions: 24Number of motorized positions: 12Axis travel: X=167.5mm - Y=102 mm Z=250 mmLower right turretNumber of positions: 24Number of motorized positions: 12Axis travel: X=167,5mm - Z=685 mmEquipped with1 FANUC 16i-TBNC 2 HPpumps 1 Set of fixed and rotatingtool holders 1 CNCparts collector 1 Chip conveyorDimensions and weight6000x2400xH2300mm - weight 12,000 kg Auction-ID: A1-50950-58

turning diameter:360 mmturning length:520 mmtotal power requirement:20 kWweight of the machine ca.:3,8 tdimensions of the machine ca.:3 x 2 x 2 m

TEACH-IN LATHE Inv. No. 13.051C1 Make CMT URSUS Model URSUS PLUS 250 Year 1996 Serial number 12628 Centre Distance 1.000 mm Max. Swing over Bed Ø 480 mm Max. Swing over Cross slide Ø 400 mm Spindle bore Ø 105 mm 2 ranges stepless 0 – 2.000 kW 8/11 Volt 380 Cycles 50 Including Toolholder Multifix 3-jaw chuck Ø 315 Auction-ID: A1-50718-47

CNC LATHE Inv. No. 12.710C1 Make MONDIALE Model GALLIC 420 CNC Control FANUC 10TF Serial number CNCG16AC Centre distance 870 mm Max. swing over Bed Ø 420 mm Max. swing over Cross Slide Ø 214 mm Spindle bore Ø 69 mm R.P.M. 45 – 2500 (inf. var.) kW 11 Volts 400 Cycles 50 Including: 6 Pos. turret Coolant Auction-ID: A1-50718-28

turning diameter:270 mmturning length:710 mmweight of the machine ca.:6,5 tmax. swing diameter:590 mmwith automatic loading and unloading system G300 with "spindle bore clamping capacity 90mm" in tailstock versionThe machine has no driven tools. The information in the circuit diagram refers to the rotary drive for indexing the turret, not to driven tools.

turning diameter:270 mmturning length:710 mmweight of the machine ca.:6,5 tmax. swing diameter:590 mmwith live tools:VDI40 Live tooling VDI40with automatic loading and unloading system G300 with "spindle bore clamping capacity 90mm" in tailstock versionChip conveyor, belt filter press, hydraulic unit, as well as infeed and outfeed chain conveyor EWAP, with 33 pallets. The machine has no driven tools. The information in the circuit diagram refers to the rotary drive for indexing the turret, not to driven tools.

turning diameter:270 mmturning length:710 mmweight of the machine ca.:6,5 tmax. swing diameter:590 mmwith automatic loading and unloading system, chip conveyorG300 with "spindle bore clamping capacity 90mm" in tailstock versionThe machine has no driven tools. The information in the circuit diagram refers to the rotary drive for indexing the turret, not to driven tools.

Machine is equipped with: - chip conveyor - tailstock - 254mm chuck Auction-ID: A1-50690-14

total power requirement:40 kWOut of valve production

CNC LATHE Inv. No. 12.711C1 Make MONDIALE Model GALLIC 420 CNC Control FANUC 10TF Serial number CNCG1685B17GE Centre distance 870 mm Max. swing over Bed Ø 420 mm Max. swing over Cross Slide Ø 214 mm Spindle bore Ø 69 mm R.P.M. 45 – 2500 (inf. var.) kW 11 Volts 400 Cycles 50 Including: 6 Pos. turret Coolant Auction-ID: A1-50718-32

turning diameter:120 mmturning length:650 mmweight of the machine ca.:11 tdimensions of the machine ca.:5,032 x 3,048 x 2,445 mGildemeister MF Twin 65-II lathe with loading automation.This machine is suitable as a counter spindle machine for 4-axis machining on the main and counter spindles, complete machining (turning, drilling, milling, Y-axis, B-axis) of bar and shaft parts.