sac levha çalışması kullanılmış satılık (3,351)

Defective. Auction-ID: A1-45188-144

Output: 610mm, Stroke: 60mm, Capacity: Ø 30mm in 15mm, Ø 50mm in 9mm, Ø 100mm in 4.5mm steel, including 1 case with various punch accessories. Auction-ID: A1-44726-6

: gebraucht : WA0043 : 129 €: 1 : 835 mmPhase: 1 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 51600 €: 975.24 €: 3080 mm: 6 mm: 4 mm: 350 mm: 20 1/min: 0.5 - 2 °: 16 : 20 to: 1000 mm: 200 mm/s: 11 kW: 125 l: 3 Stk.: 820 mm: 494 mm: 3280 mm: 4100 mm: 2050 mm: 3650 mm: 1950 mm: 7980 kglinear guidedCNC touch screen D-touch 7back gauge,cutting angle,cutting gap,cutting length, quantityUSB portcutting line illuminationfoldable ball screws for back gaugeballs in tablefoldable finger protection, 1.000 mmside lay with T-slot, tilting cam and scale3 support arms wit T-slotsoilfillinglight barrier on the back of the machineuser manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 145000 €: 2740.5 €: 6080 mm: 6 mm: 4 mm: 350 mm: 10 1/min: 0.5 - 2 °: 29 : 20 to: 1000 mm: 200 mm/s: 22 kW: 200 l: 5 Stk.: 900 mm: 630 mm: 6370 mm: 7300 mm: 2150 mm: 3400 mm: 2750 mm: 25500 kglinear guidedCNC touch screen D-touch 7back gauge,cutting angle,cutting gap,cutting length, quantityUSB portCNC controlled cutting gap adjustment by the table (patented)oil coolermanual central lubricationcutting line illuminationfoldable ball screws for back gaugeballs in tablefoldable finger protection, 1.000 mmside lay with T-slot, tilting cam and scale5 support arms wit T-slotsoilfillinglight barrier on the back of the machineuser manual in GERMAN and ENGLISHPRICE FCA TURKEY(sample photo)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : 1030 mm: 10 mm: 6 mm: 10 1/min: 3 °: 7 : 5000 mm: 11 kW: 100 l: 900 mm: 1550 mm: 1150 mm: 1600 mm: 1900 kghydr. drive unit, completely integrated in the machine bodyoverload safety, hydraulic and electricaladjusting of the cutting angleadjusting of the cutting gapblank holder pressure, adjustablesupport arm with angle stop and scale up to 600 mm4 rotating knives for VA steelmovable pedal switch with solenoid valvesMotorised backgaugeCentral lubricationexchangeable machine table supportsection area lightingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 13800 €: 264.96 €: 1550 mm: 4 mm: 140 mm: 3,5 m/min: 2.2 kW: 2700 mm: 750 mm: 1000 mm: 1420 kg3 rollsasymmetric rolls - prebending2 rolls driven by brakemotormanual Back Rollforward tiltable upper rollforward and reverse revsconical bending by tilt of backrollmovable control panelusers manual in ENGLISH or GERMANOPTIONS:hardened Rolls Motorised Back Roll (Power Rear Roll) Digital Read-OutThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 31600 €: 603.56 €: 2050 mm: 6 mm: 6 mm: 4 mm: 4 mm: 3 mm: 150 mm: 150 mm: 130 mm: 1,5 / 6 m/min: 4 kW: 4250 mm: 960 mm: 1100 mm: 2800 kg4 rollsTop rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan systemPinch roll and latereal rolls move with hydraulic cylindersDigital read-out for lower and side rolls positionHardened rollsConical bending deviceHydraulic load relieving of upper rollHydraulic drop-end bearing2 working speedsProtectionagainst overloadMoveable control paneAccording to CE rulesOPTIONAL EQUIPMENT:Infinitely adustable speed of rollsHydraulic side supportHydraulic top supportNC controlIMPORTANT ISSUES AT CONICAL BENDING:The max. sheet metal thickness isequivalent to 50 % of nominal capacityThe cone length can be max. 30 % oremust be more than 60 % of roll lengthHardened rolls are recommende ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 4900 €: 109.71 €: 1050 mm: 3 mm: 2 mm: 90 mm: 2080 mm: 700 mm: 1250 mm: 410 kg3 rollsasymmetric rolls - prebending2 rolls driven by handwheellateral roll adjustable by handwheellongitudinal grooves in lower and lateral rolltiltable upper rollconical rolling deviceuser manual in GERMANThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 5300 €: 102.29 €: 1270 mm: 1.5 mm: 75 mm: 1.5 kW: 1830 mm: 700 mm: 1160 mm: 400 kg3 rollsasymmetric rolls - prebending2 rolls driven by brakemotorlateral roll adjustable by ratchet leverlongitudinal grooves in lower and lateral rolltiltable upper rollhardened rollersright / left rotation with double foot switchuser manual in GERMAN or ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 53700 €: 1014.93 €: 2050 mm: 16 mm: 16 mm: 13 mm: 13 mm: 10 mm: 260 mm: 260 mm: 200 mm: 1,5 / 6 m/min: 7.5 kW: 4300 mm: 1600 mm: 1550 mm: 6100 kg4 rollsTop rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan systemPinch roll and latereal rolls move with hydraulic cylindersDigital read-out for lower and side rolls positionHardened rollsConical bending deviceHydraulic load relieving of upper rollHydraulic drop-end bearing2 working speedsProtectionagainst overloadMoveable control paneAccording to CE rulesOPTIONAL EQUIPMENT:Infinitely adustable speed of rollsHydraulic side supportHydraulic top supportNC controlIMPORTANT ISSUES AT CONICAL BENDING:The max. sheet metal thickness isequivalent to 50 % of nominal capacityThe cone length can be max. 30 % oremust be more than 60 % of roll lengthHardened rolls are r ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 103100 €: 1948.59 €: 2550 mm: 25 mm: 25 mm: 20 mm: 20 mm: 16 mm: 350 mm: 350 mm: 260 mm: 1,5-5 m/min: 22 kW: 5500 mm: 2000 mm: 1900 mm: 13000 kg4 rollsfullhydraulic drive of upper roll and lower rollhydraulic infeed of lower and side rolldigital read-out of lower and side rolls positionhardened rollsconical bending devicehydraulic load relieving of upper rollhydraulic drop-end bearing2 working speedscentral lubrication systemprotectionagainst overloadmoveable control paneaccording to CE rulesOPTIONAL EQUIPMENT:infinitely adustable speed of rollshydraulic side supporthydraulic top supportNC controlIMPORTANT ISSUES AT CONICAL BENDING:the max. sheet metal thickness isequivalent to 50 % of nominal capacitythe cone length can be max. 30 % oremust be more than 60 % of roll lengthhardened rolls are recommendedThe data for this ad was created wit ...

: neu : ca. 2 - 4 Wochen ab Auftr : Niederlande : 951 €: 1 1/2 48,3 mm, 2 60,3 m mm: 3 mm: 2.5 mm: 15 kgThe AL 2 can be used to notch pipes with an external diameter of 48.3 mm (1 1/2",) and 60.3 mm (2",).ALMI products are subjected to stringent quality control inspections before they leave the factory.ALMI’s pipe notcher, in contrast to punch-cutting machines with separate auxiliary tools, is always available for immediate use.Moreover, the price is more affordable than the auxiliary tools for punch-cutting machines.All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are available immediately, ideal for double corner joints.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2023 : 9684 : prompt, Zwischenverkauf v : Türkei : 830 €: 1 : 1.2 mm: 100 mm: 140 nm: 7 Stk.: 62 mm: 560 mm: 220 mm: 500 mm: 50 kg7 tool setsusers manual in ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 5100 €: 98.43 €: 2.5 mm: 160 mm: 250 nm: 4 Stk.: 96 mm: 13 1/min: 1475 mm: 550 mm: 1200 mm: 320 kgreduction motor with brake systemmovement of rolls with foot pedaladjustable idle rollsteel shafts with bronze bushings4 set of rollscomplete with standuser manual in GERMAN or ENGLISHaccording to CE rulesALTERNATIVE:HIBKS 2,5 with hydraulic upper roll feed € 7.600,00The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Auction-ID: A1-45188-238

: neu : 2025 : 090069 : prompt, Zwischenverkauf v : Türkei : 720 €: 1 : 0.8 mm: 80 mm: 110 nm: 7 Stk.: 52 mm: 380 mm: 180 mm: 380 mm: 30 kg7 tool setsusers manual in ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: WA0136 : 3150 €: 1 : 8 mm: 3 x 1.000 & 1 x 1.050 mmcomplete 30°The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0052 : 292 €: 1 : 835 mm: 80 mm: 16 mmmint conditionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 52900 €: 999.81 €: 3100 mm: 4.5 mm: Hydraulisch : 135 °: 4500 mm: 1750 mm: 1950 mm: 5500 kghydraulic drivenNC control for bending anglemanual back gauge 600 mmsharp rail 45° (in one piece)front angle beam 75 mmmechanical stop adjustment of upper beamclamping force adjustment of upper beamaccording to CE rulesALTERNATIVELY:versionAMH-K,withSECTIONEDsharp rail 45° OPTION:2 axes NC control with 7", touchscreen incl. motorized back gauge 800 mm (sample photos)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width between the columns 3600mm, projection 300mm, Including 1x cart with various press brake accessories Auction-ID: A1-44726-2

: neu : ca. 12 Wochen ab Auftrags : Türkei : 11800 €: 226.56 €: 2500 kg: 1300 mm: 450 - 550 mm: 400 mm: 50 mm: 80 mmmotorized drivemechanical adjustable coil mandrel with 4 jawsspeed control for decoiling speed aswell as acceleration- and deceleration timesphotoelectric proximity ensor SICK for sag controlAlternative:Variant with pneumatic pressure arm (CMC P3 2500 400 M D1300) € 14.500,--The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2026 : 070152 : prompt, Zwischenverkauf v : Türkei : 4800 €: 1 : 500 kg: 1200 mm: 400 mm: 550 mm: 300 mm: 50 mm: 80 mm: 0.55 kW: 1400 mm: 1200 mm: 1550 mm: 190 kgmotorized drivemechanical adjustable coil mandrel with 4 jawsspeed control for decoiling speed aswell as acceleration- and deceleration timesphotoelectric proximity ensor SICK for sag controlThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Auction-ID: A1-45239-2154

: neu : ca. 10 Wochen ab Auftrags : Türkei : 31620 €: 603.94 €: 0.4 - 2 mm: 600 mm: 1200 mm²: 80 mm: 75 m/min: 10 m/s²: 10 Nmhelical gear boxWATTDRIVE (Made in Austria)FESTO pneumatic equipmentservo drive and control SIEMENS7", colour touchscreen SIEMENS2 driven rollsOPTIONAL EQUIPMENTHandrwheel and Simlinx remote control € 4.290,--The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 57500 €: 1086.75 €: 4010 mm: 2 mm: Hydraulisch : 135 °: 5600 mm: 1750 mm: 2050 mm: 4600 kghydraulic drivenNC control for bending anglemanual back gauge 600 mmsharp rail 45° (in one piece)front angle beam 75 mmmechanical stop adjustment of upper beamclamping force adjustment of upper beamaccording to CE rulesALTERNATIVELY:versionAMH-K,withSECTIONEDsharp rail 45° OPTION:2 axes NC control Schneider7", touchscreen incl. motorized back gauge 800 mm (sample photos)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 6900 €: 133.17 €: 2 mm: 700 mm: 1.1 kW: 7,5 m/min: 1400 mm: 400 mm: 1150 mm: 360 kg: 120 / 1.000 mm: 280 mmgearbox motor with brakefootpedalcentral lubricationOPTIONAL EQUIPMENT:pneumatic upper roll feedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 16000 €: 307.2 €: 2050 mm: 4 mm: 140 mm: 2.2 kW: 3200 mm: 750 mm: 1000 mm: 1650 kg3 reelsasymmetrical roller arrangement - with pre-bending2 driven rollers by means of a brake motormanual Back Rollupper roller can be swiveled forwardforward / reverse runconical rounding by inclining the rear rollersmovable control panelOPTIONS:hardened Rolls Motorised Back Roll (Power Rear Roll) Digital Read-Out (sample photo)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0084 : 295 €: 1 : 835 mm: 1 mmmint conditionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0089 : 142 €: 1 : 835 mm: 1 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.