sac levha çalışması kullanılmış satılık (3,292)

material width:400 mmmaterial thickness:0,6 - 2,8 mmno. of straightening rolls:5 straightening roll diameter:40 mmno. of pulling rolls:2 + 2 material thickness at 400 mm material width:1,8 mmmaterial thickness at 65 mm material width:2,8 mmpower capacity:3,0 kWweight:0,45 tDimensions (WxDxH):0,8 x 1,8 x 1,35 m

: neu : ca. 10 Wochen ab Auftrags : Türkei : 11400 €: 218.88 €: 1050 mm: 5 mm: 130 mm: 3,5 m/min: 2.2 kW: 2200 mm: 750 mm: 1000 mm: 1200 kg3 rollsasymmetric rolls - prebending2 rolls driven by brakemotormanual Back Rollforward tiltable upper rollforward and reverse revsconical bending by tilt of backrollmovable control panelusers manual in ENGLISH or GERMANOPTIONS:hardened Rolls Motorised Back Roll (Power Rear Roll) Digital Read-OutThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

material width:250 mmmaterial thickness:0,2 - 2,0 mmno. of straightening rolls:7 straightening roll diameter:60 mmrun-in height:1250 mmpower capacity:4,0 kWweight:0,65 tDimensions (WxDxH):1,05 x 1,25 x 1,5 m

: neu : ca. 12 Wochen ab Auftrags : Türkei : 12630 €: 242.5 €: 0.4 - 2 mm: 200 mm: 300 mm²: 63 mm: 150 m/min: 10 m/s²FESTO pneumatic systemSIEMENS servo drive and control system7’ colour touch screen SIEMENS2 feed rollersOption:Handwheel and Simlinx remote maintenance module € 4.290,--The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

material width:250 mmmaterial thickness:0,4 - 3,5 mmno. of straightening rolls:9 straightening roll diameter:30 mmspeed:3 - 15 m/minmaterial thickness at 250 mm material width:3,0 mmmaterial thickness at 200 mm material width:3,5 mmpower capacity:1,8 kWweight:0,9 tDimensions (WxDxH):1,45 x 1,4 x 1,55 m

material width:200 mmmaterial thickness:0,8 - 3,0 mmno. of straightening rolls:6 straightening roll diameter:53 mmnumber of draw-in rolls:2 diameter of draw-in rolls:96 mmmaterial cross-cut:400 mm²speed:3 - 15 m/minpower capacity:0,75 kWweight:0,5 tDimensions (WxDxH):1,0 x 1,0 x 1,4 m

plate thickness:4 mmblade length:180 mmweight of the machine ca.:21 kgdimensions of the machine ca.:400 x 100 x 1500 mm

: neu : ca. 12 Wochen ab Auftrags : Türkei : 34900 €: 666.59 €: 2050 mm: 8 mm: 8 mm: 6 mm: 8 mm: 6 mm: 6 mm: 4 mm: 180 mm: 180 mm: 150 mm: 5 m/min: 3850 mm: 1350 mm: 1290 mm: 3300 kgmotorized roller driveupper and lower roller drivenhydraulic side roll feed3 digital displayshydraulic folding bearingshardened rollersconical bending deviceuser manual in GERMAN or ENGLISHOPTIONAL EQUIPMENT:overhead craneside supportsNC controlvariable speedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Türkei : 29990 €: 572.81 €: 0.4 - 3.5 mm: 200 mm: 700 mm²: 80 mm: 75 m/min: 10 m/s²: 10 Nmhelical gear boxWATTDRIVE (Made in Austria)FESTO pneumatic equipmentservo drive and control SIEMENS7", colour touchscreen SIEMENS2 driven rollsOPTIONAL EQUIPMENTHandrwheel and Simlinx remote control € 4.290,--The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0181 : prompt, Zwischenverkauf v : 1800 €: 1 : 3100 mm: 160 mm: 45 mmmint condition86° Slightly cranked, planedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

material width:300 mmcoil weight:2 x 1,25 tmaterial thickness:0,4 - 1,2 mmcoil internal diameter:320 - 420 mmcoil external diameter:1300 mmno. of straightening rolls:9 straightening roll diameter:30 mmnumber of draw-in rolls:2 roll diameter:30 mmspeed:3 - 30 m/minfeed length:0 - 9999,9 mmpower requirement:3,0 + 2,5 kWweight of decoiler:0,7 tdimensions decoiler (WxDxH):2,1 x 1,4 x 1,5 mmweight of straightening machine:0,45 tdimensions straightener (WxDxH):1,5 x 0,8 x 1,1 mmweight of the feeder:0,4 tdimensions feeder (WxDxH):1,2 x 0,8 x 1,1 mmuniversal straightening machine:SC 12-FQ double decoiler:2352 B-FPS expansion:hydraulic lag brake:pneumatic electronic roll feed:WAV-RDS-2Z, Modell 1082 B intermittant lifting:pneumatic control:Siemens S 5

material width:150 mmcoil weight:1,5 tcoil internal diameter:500 mmcoil external diameter:940 mmstrip material:20 x 1,0 - 50 x 4,0 / 200 x 2,0 mmwire diameter:1,0 - 5,0 mmpower requirement:0,7 kWweight:0,7 tDimensions (WxDxH):1,0 x 1,7 x 2,0 mpalett decoiler:motoric driven

: neu : ca. 6 Monate ab Auftragse : Spanien STANDARD EQUIPMENT• Entry guide• Feeding rolls• 7 Straightening rolls• Encoder• Shear• Variable speed of 0 to 20 mts/minOPTIONS• Film plastic device• Motorised entry guide• Hydraulic entry table• Hydraulic dauble entry table• Stackers 2, 3, 4, 6 meters. MATERIAL TO BE PROCESSED: WIDTH TO PROCESS: THICKNESS (R=450NW/MM2) PRODUCTION SPEED: CUTTING ACCURACY: COIL LOADING CAPACITY: Steel420 Nw/mm2Steel700 Nw/mm2Aluminium200 Nw/mm2 750,1000,1250,1500 mm from0`5to1`5 - 2`0 - 3`0 - 4`0 mm up to 20 m/min +/? 0`5 mm 4,6,10,15 toIf you are interested, please send us your enquiry with the following details:- Coil weight- Coil width- Coil inner and outer diameter- type of material- Material thickness- Number of slitting lines (only for slitting and cut-to-length lines)- Material to be processed in tonnes per yearThe data for this ad w ...

: gebraucht : 1988 : 070009 : prompt, Zwischenverkauf v : Deutschland : 1600 €: 1 : 400 mm: 700 mm: 1500 mm: 2050 mm: 820 mm: 1000 mmwith brakewith 2 spare mandrelsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2021 : 90004 : prompt, Zwischenverkauf v : Türkei : 22600 €: 1 : 3100 mm: 4 mm: 42 1/min: 1.5 °: 750 mm: 7.5 kW: 2 Stk.: 800 mm: 450 mm: 3700 mm: 2300 mm: 1350 mm: 3730 kgmot. back gauge with digitalreadout DT 5hold down with rubber padsside lay with T-sluts2 supporting armsballs in the tabletilt stoplight barriers on the back of the machinecutting line illuminationuser manual in GERMANBUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISEWe offer you maximum security and complete transparency.• HONEST INSIGHTS: Detailed photos and functional videos of the current condition• LIVE ON-SITE CHECK: Live testing is possible at our facility• DIGITAL DEMONSTRATION: Individual live demonstration via video call• RISK-FREE PURCHASE: 14-day return policyDetails:https://www.hesse-maschinen.com/en/lp/used-machinesThe data for this ad was created with ModulMWS  ...

: neu : ca. 12 Wochen ab Auftrags : Italien : 2000 mm: 28 mm: 28 mm: 22 mm: 26 mm: 23 mmHardened and polished rollersNumerical control Siemens PGS-Classic with touchscreenCone bending with electronic control and inclination of the bottom rolleroil coolerSimultaneous rotation and roller movementSimultaneous roller and support movementPossibility to bend variable radii (ovals, ellipses, etc.)Hydraulic micro-positioning by the PLC for higher accuracyInfinitely variable speed for roller movementInfinitely variable speed for rotationPrepared for retrofitting supports (up to 5 axes)Prepared for retrofitting loading/unloading stationsPrepared for retrofitting CNC controlsExtra large, double hinged drop endElectronic parallelism system for the synchronization of the rollersHydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more)Double linear guide for the movemen ...

: neu : ca. 8 Wochen ab Auftragse : Spanien : 23400 €: 449.28 €: 110 to: 500 mm: 40x20 mm: 28 1/min: 9 kW: 2080 mm: 1300 mm: 2050 mm: 3150 kghydraulic drivetable with gaugeuser manual in GERMAN and ENGLISHCNC options on requestWe have a big stock of punches and dies for immediate dispatchWE HAVE MORE THAN 700 REFERENCES!The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

material width:300 mmcoil weight:0,5 tmaterial thickness:0,4 - 3,0 mmcoil internal diameter:420 - 520 mmcoil external diameter:1200 mmno. of straightening rolls:9 straightening roll diameter:50 mmnumber of draw-in rolls:2 diameter of draw-in rolls:50 mmpower requirement:1,5 kWweight:1,55 tdimensions (WxDxH):2,5 x 1,2 x 1,8 m

: neu : ca. 8 Wochen ab Auftragse : Spanien : 7570 €: 146.1 €: 50 to: 130 mm: 13/27 mm: 23 1/min: 3 kW: 1100 mm: 900 mm: 1550 mm: 355 kgportable, hydraulic punching machinetable with gaugefoot pedaluser manual in German or EnglishThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Italien : 2500 mm: 20 mm: 20 mm: 12 mm: 15 mm: 13 mmHardened and polished rollersNumerical control Siemens PGS-Classic with touchscreenCone bending with electronic control and inclination of the bottom rolleroil coolerSimultaneous rotation and roller movementSimultaneous roller and support movementPossibility to bend variable radii (ovals, ellipses, etc.)Hydraulic micro-positioning by the PLC for higher accuracyInfinitely variable speed for roller movementInfinitely variable speed for rotationPrepared for retrofitting supports (up to 5 axes)Prepared for retrofitting loading/unloading stationsPrepared for retrofitting CNC controlsExtra large, double hinged drop endElectronic parallelism system for the synchronization of the rollersHydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more)Double linear guide for the movemen ...

: neu : 2024 : 7314 : prompt, Zwischenverkauf v : Türkei : 14800 €: 284.16 €: 1 : 2500 kg: 1300 mm: 450 mm: 550 mm: 600 mm: 80 mm: 1600 mm: 1550 mm: 2000 mm: 580 kgmotorized drivemechanical adjustable coil mandrel with 4 jawsspeed control for decoiling speed aswell as acceleration- and deceleration timesphotoelectric proximity ensor SICK for sag controlPneumatic downholderALTERNATIVES (prices on request):Version without pneumatic pressure armVersion with brake, without motor, with or withaout pneumatic pressure armThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Spanien : 49600 €: 947.36 €: 130 to: 600 mm: 5 : 2 : 50x18 mm: 80 mm: 600x18 (max. 600x20 mit D mm: 120x120x11 (max. 150x150x mm: 45/40 mm: 130x12 mm: 250x12 mm: 15 kWhydraulic drive2 foot pedals for independant working on punching and section stationbending unit with 2 dies, V50 and V90flat steel stationWITH DEVICE FOR REDUCING DEFORMATIONangle iron station with round and square bar cuttingtriangular notching station with table and gaugepunching station with table and gaugegauge 1000 mm with contact switch, for angle / flat steel stationoperating manual in German and EnglischThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 25200 €: 481.32 €: 1050 mm: 2.5 mm: 2.5 mm: 2 mm: 90 mm: 4,5 m/min: 2.2 kW: 2250 mm: 1000 mm: 1500 mm: 900 kgFOR ROUND AND ELEPTIC SHAPES FOR MASS PRODUCTION (CYCLE UP TO ONLY 20 SEC POSSIBLE)4 rollsNC control with touchscreenTop roll driven by hydromotor and plantary gearboxHydraulic drop endMobile control panelHardened rollsOperating manual in English or GermanOPTION:Feeding table price on requestThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 73200 €: 1383.48 €: 2050 mm: 20 mm: 20 mm: 16 mm: 16 mm: 12 mm: 280 mm: 280 mm: 220 mm: 1,5 / 5 m/min: 16.5 kW: 4350 mm: 1700 mm: 1850 mm: 8550 kg4 rollsfullhydraulic drive of upper roll and lower rollhydraulic infeed of lower and side rolldigital read-out of lower and side rolls positionhardened rollsconical bending devicehydraulic load relieving of upper rollhydraulic drop-end bearing2 working speedscentral lubrication systemprotectionagainst overloadmoveable control paneaccording to CE rulesOPTIONAL EQUIPMENT (PRICES ON REQUEST):infinitely adustable speed of rollshydraulic side supporthydraulic top supportNC controlIMPORTANT ISSUES AT CONICAL BENDING:the max. sheet metal thickness isequivalent to 50 % of nominal capacitythe cone length can be max. 30 % oremust be more than 60 % of roll lengthhardened rolls are recommendedThe data for t ...

: gebraucht : WA0043 : 129 €: 1 : 835 mmPhase: 1 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0081 : 177 €: 1 : 835 mm: 1 mmmint conditionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

material width:500 mmmaterial thickness:0,2 - 3,8 mmfeed length:0 - 9999,9 mmnumber of rolls:2 material cross-cut:128 mm²speed:60 m/minpower requirement:2,0 kWdimensions (WxDxH):1,2 x 1,3 x 1,5 mroll feed:Servo control:Siemens S 7, modification 2002

: gebraucht : WA0084 : 295 €: 1 : 835 mm: 1 mmmint conditionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0042 : 950 €: 1 : 835 mmmint conditionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight of the machine ca.:620 kgdimensions of the machine ca.:1000 x 920 x 1550 mm