kaynak makineleri kullanılmış satılık (1,606)

sayı: 29 Positionen: 16 mmcondition: neu weight: 11 kg1 29 adet, 16mm sistem, oluşan:Clamps: 4 x 160610Bolt: 12 x 160511Stop: 4 x 160420.NAngle: 4 x 160108.NAngle: 4 x 160110.NAsağlık seti. 1 x 163999Fiyat artı paketleme ve taşıma.

table length: 2000 mmtable width: 1000 mmtable height: 850 mmVertikal stroke: 40 mmweight of the machine ca.: 0,38 tdimensions: 2,0 x 1,0 x 0,9 mWelding table SIEGMUND Professional 750 + plasma nitridedis made of high quality steel S355J2 + N and is plasma nitrided.Surface hardness max. 750 Vickers.The table has a material thickness of approx. 11.5 - 13.0mm.The holes have a diameter of 16mm.Hole arrangement in 50 mm grid on the table top,parallel hole arrangement in a 25 mm grid on the sides.Including basic equipment. Table height 850mmAccessories shown are optional.Price plus packaging and transport.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1200 mmtable width: 800 mmtable height: 850 mmVertikal stroke: 50 mmweight of the machine ca.: 0,35 tdimensions: 1,2 x 0,8 x 0,9 mWelding table SIGMUND Professional 750 + Plasma-nitridedis made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers.The table has a material thickness of approx. 24.5-27mm.The holes have a diameter of 28mm.Hole arrangement in 100 mm grid on the table topparallel hole arrangement in 50 mm grid on the sides.Incl. Foot basic equipment. Pictured accessories optional.Price indication plus packaging and transport.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Koruma seviyesi: 9 - 13 MPower beslemesi: 2 x CR2032 3Vweight: 460 Gramdimensiyon: 250 x 270 x 230 mm

volume capacity: 2500 m3/h0: 3000 mmtotal power requirement: 1,1 kWweight of the machine ca.: 0,08 tdimensions of the machine ca.: 0,58x0,58x0,58 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1000 mmtable load: 0,6 tswivelling range: 0 - 90 Gradturning speeds: 0,1 - 1,25 U/minmax. torque on the faceplate: 900 Nmtable pass: 200 mmwelding current: 500 Amperetotal power requirement: 0,37 + 0,75 kWweight of the machine ca.: tELDING TABLE WITH LARGE THROUGH BORE• Self-locking gearbox, no pre- or after-run with eccentric load.• Electronic components from Siemens and Schneider.• Frequency-controlled, very accurate speed control.• Turntable with large through hole and T-slots.• High stability through a clever construction.• CE certificate.• Very good price / quality ratio.• The D-TLP series comes with remote control and foot pedal (left / right).No original pictures. Design but identical.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 5 tworkpiece diameter: 100-2500 mmgear diameter: 250 mmgear width: 140 mmtotal power requirement: 0,8 kWweight of the machine ca.: 0,8 tdimensions of the machine ca.: 2,0 x 1,4 x 1,0 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mmtable width: 1200 mmtable height: 850 mmVertikal stroke: 40 mmweight of the machine ca.: 0,55 tdimensions: 2,4 x 1,2 x 0,9 mWelding table SIEGMUND Professional 750 + plasma nitridedis made of high quality steel S355J2 + N and is plasma nitrided.Surface hardness max. 750 Vickers.The table has a material thickness of approx. 11.5 - 13.0mm.The holes have a diameter of 16mm.Hole arrangement in 50 mm grid on the table top,parallel hole arrangement in a 25 mm grid on the sides.Including basic equipment. Table height 850mmAccessories shown are optional.Price plus packaging and transport.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2000 mmtable width: 1000 mmtable height: 850 - 900 mmweight of the machine ca.: 0,45 tWelding table / perforated table:Hole diameter: 28mmThe table is made of 15mm thick, high-alloy steel S355 JR T = 15The surface is untreated.Sidewalls 165mmheight adjustable from approx. 880 - 980mmRibbed underside for reinforcement.including floor storageAccessories optional Surface flatness 0.2 - 0.4mm on 1000mm.Very sturdy base, so theTable can be moved with a pallet truck.The accessories shown are optional!Pallet truck is not included in the scope of delivery The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 3000 mmtable width: 1500 mmtable height: 850 mmVertikal stroke: 50 mmweight of the machine ca.: 1,5 tdimensions: 3,0 x 1,5 x 0,9 mWelding table SIEGMUND Professional Extreme 850 + plasma nitridedis made of high quality steel S355J2 + N and is plasma nitrided.Surface hardness max. 850 Vickers.The table has a material thickness of approx. 24.5-27mm.The holes have a diameter of 28mm.Hole arrangement in 100 mm grid on the table top,parallel hole arrangement in 50 mm grid on the sides.Including basic equipment. Accessories shown are optional.Price plus packaging and transport.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mmtable width: 1200 mmtable height: 850 mmVertikal stroke: 50 mmweight of the machine ca.: 0,99 tdimensions: 2,4 x 1,2 x 0,9 mWelding table SIEGMUND Professional Extreme 850 + plasma nitridedis made of high quality steel S355J2 + N and is plasma nitrided.Surface hardness max. 850 Vickers.The table has a material thickness of approx. 24.5-27mm.The holes have a diameter of 28mm.Hole arrangement in 100 mm grid on the table top,parallel hole arrangement in 50 mm grid on the sides.Including basic equipment. Accessories shown are optional.Price plus packaging and transport.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 3000 mmtable width: 1500 mmtable height: 850 mmVertikal stroke: 50 mmweight of the machine ca.: 1,5 tdimensions: 3,0 x 1,5 x 0,9 mWelding table SIGMUND Professional 750 + Plasma-nitridedis made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers.The table has a material thickness of approx. 24.5-27mm.The holes have a diameter of 28mm.Hole arrangement in 100 mm grid on the table topparallel hole arrangement in 50 mm grid on the sides.Incl. Foot basic equipment. Pictured accessories optional.Price indication plus packaging and transport.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mmtable width: 1200 mmtable height: 850 mmVertikal stroke: 50 mmweight of the machine ca.: 0,99 tdimensions: 2,4 x 1,2 x 0,9 mWelding table SIGMUND Professional 750 + Plasma-nitridedis made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers.The table has a material thickness of approx. 24.5-27mm.The holes have a diameter of 28mm.Hole arrangement in 100 mm grid on the table topparallel hole arrangement in 50 mm grid on the sides.Incl. Foot basic equipment. Pictured accessories optional.Price indication plus packaging and transport.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 3000 mmtable width: 1500 mmtable height: 850 mmVertikal stroke: 40 mmweight of the machine ca.: 0,8 tdimensions: 3,0 x 1,5 x 0,9 mWelding table SIEGMUND Professional 750 + plasma nitridedis made of high quality steel S355J2 + N and is plasma nitrided.Surface hardness max. 750 Vickers.The table has a material thickness of approx. 11.5 - 13.0mm.The holes have a diameter of 16mm.Hole arrangement in 50 mm grid on the table top,parallel hole arrangement in a 25 mm grid on the sides.Including basic equipment. Table height 850mmAccessories shown are optional.Price plus packaging and transport.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number: 55 Positionen: 16 mmcondition: neu weight: 23 kgSet 2 55 pieces, 16mm system, consisting of:Clamps: 6 x 160610Clamps: 2 x 160630Prism: 4 x 160645.1.NBolt: 18 x 160511Stop: 4 x 160410.NStop: 6 x 160420.NAngle: 6 x 160108.NAngle: 6 x 160110.NAngle: 2 x 160162.NAccessory set. 1 x 163999Price plus packaging and transport.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1000 mmtable width: 1000 mmtable height: 850 mmVertikal stroke: 50 mmweight of the machine ca.: 0,3 tdimensions: 1,0 x 1,0 x 0,85 mWelding table SIEGMUND Professional 750 + plasma nitridedis made of high quality steel S355J2 + N and is plasma nitrided.Surface hardness max. 750 Vickers.The table has a material thickness of approx. 17-19.0mm.The holes have a diameter of 16mm.Hole arrangement in 50 mm grid on the table top,Side walls 150mm with parallel hole arrangement in a 25 mm grid.Including basic equipment. Table height 850mmAccessories shown are optional.Price plus packaging and transport.Other dimensions available.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Koruma seviyesi: 9 - 13 MPower beslemesi: 3 Voltweight: 2 kgdimensiyonlar: 300 x 240 x 240 mm

kaynak akımı: 10 - 180 Aopen devresi gerilimi: V bağlı yük frekansı: 230 Vweight: 6,8 kgDimensions (LxWxH): 403 x 153 x 264 mmErt gaz kaynak makinesi için çeşitli:Hose paketi 4m. Toprak kablosu 4m Inert gaz kaynak makinesi için aksesuarlar: Hose paketi 4m. Zemin kablosu 4mWelding tel 1 rulo, Presür göstergesiWelding tel 1 rulo, Presür göstergesiZzle ve gaz nozül ileList fiyat: 2200, -EUR

Koruma seviyesi: 4 - 12 MPower beslemesi: 2 x CR2032 ağırlık: 460 Gramdimensiyon: 250 x 270 x 230 mm

tablo çapı: 450 mmbül yük: waagerecht 300 Kgtable yük: senkrecht 150 Kgtable dönüş hızları: 0,2- 2 U/dkvoltage: 230 V / 50 Hztotal güç gereksinimi: 0,55 kWkayıt ağırlığı: Makine ka.'nın 80 KGdimensiyonları: 0,65 x 0,5 x 1,0 m• Kullanılmayan stok makinesi• Manuel eğim ayarı• Yaya anahtarıyla start-Stop• CE ile

masa uzunluğu: 590 mmblas genişliği: 590 mmbüyük yük: 200 Kgtable dönüş hızları: 0,23 - 2,3 U/dktable yüksekliği: 650 mmtoptal güç gereksinimi: Makinenin 0,55 kW ağırlığı: 600 Kg

manuel olarak çalıştırılır, hava soğutmalı %50 ED'de anma gücü: 2,4kVA Kısa devre akımı: 7.5kA Elektrot kuvveti maks.: 180daN Projeksiyon: 250mm --- ile donatılmış: - 5m bağlantı kablosu - Standart elektrot kolları 250mm Kontrol RS15 (opsiyonel) --- Garanti 6 ay --- Eğitim + talep üzerine devreye alma --- Punta kaynak elektrotları + stokta bulunan yedek parçalar

Özellikler: - Kaynak akımı 300 A %60 ED - 230 A% 100 ED - Kaynak akımı 10 A'dan 300 A'ya kadar ayarlanabilir - Akım tüketimi 400 V / 19,5 A / 10,7 kVA - ile: - E.- kaynak kablosu - Topraklama kablosu - Bağlantı kablosu - Alan gereksinimi yaklaşık. G 600 x Y 900 x D 1000 mm - Ağırlık yaklaşık. 180 kg

Her pozisyonda inert gaz altında kaynak yapmak için tabaka sarılmış katı tel. Koruyucu gaz tipleri: Ar, CO2/Ar, CO2, O2/CO2. Kaynak teli rulo MAG tel elektrot, kullanılmamış, orijinal shrink-folyo sarılı, karton ovp! 15kg 1,2 mm Üreticiler Birliği Tip A600IG Muhtemelen biriktirme kaynağı için Birden fazla kullanılabilir. Tam kabul için özel fiyat! Özel fiyat!

Özellikler: - Kaynak akımı 315 A %80 ED - 280 A% 100 ED - Kaynak akımı 50 A'dan 315 A'ya kadar ayarlanabilir - Akım tüketimi 400 V / 19,5 A / 10,7 kVA - ile: - E.- kaynak kablosu - Topraklama kablosu - Bağlantı kablosu - Alan gereksinimi yaklaşık. G 600 x Y 900 x D 1000 mm - Ağırlık yaklaşık. 200 kg

%50 ED'de anma gücü: 35kVA Kısa devre akımı: 19kA Elektrot kuvveti: 300daN / tek zamanlı Projeksiyon: 395mm --- Kaynak kontrolü: WS 708 (7 kez, 8 program) --- Ek seçenekler dahil: - Ayak pedalı anahtarı - Üst bağlantı parçasının basınçsız indirilmesi - Ana anahtar --- Garanti 6 ay --- Eğitim + talep üzerine devreye alma --- Punta kaynak elektrotları + stokta bulunan yedek parçalar

çelik için kesme aralığı: %100'de 76 mmkapitanlık: 51 mm kesme ortamı: 400 Ampgülasyonlu tahrik: 50-150 und 100 - 400 AmpSteuerSteuercontrol gerilimi: Makinenin 24 Volt ağırlığı: Makinenin 750 kgdimensiyonları: 82 x 122 x 930 cm

table diameter: 1300 mmtable load: 7.000 kgFrontal Loading Center (A): 150 mmSide Loading Center (B): 150 mmRotating speeds: 0,1 - 0,9 UpMT-slots: 6 x M24 Tilt Angle: 90-180-100 °Tilting Speed: 30 sn min./90°weight of the machine ca.: 3.050 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 960 mmtable load: 3.500 kgFrontal Loading Center (A): 150 mmSide Loading Center (B): 150 mmRotating speeds: 0,1 - 0,9 UpMT-slots: 6 x M20 Tilt Angle: 70-90-180 °Tilting Speed: 30 sn min./90°weight of the machine ca.: 1.500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 715 mmtable load: 500 kgFrontal Loading Center (A): 150 mmSide Loading Center (B): 150 mmRotating speeds: 0,1 - 1 UpMT-slots: 6 x M16 Tilt Angle: 90-180-110 °Tilting Speed: 30 sn min./90°weight of the machine ca.: 675 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.