diğer metal çalışma makineleri kullanılmış satılık (11,425)

Reamer, twist drill, drill bit, spiral countersink, three-flute, twist drill -Three-knife -Diameter: 16.8 mm -Usable length: 120 mm -Recording: MK2 Type: HSS -Quantity: 24 pieces -Sale: only complete set -Weight: 7.5 kg

collet chuck, tool holder, tool holder, milling chuck, milling tool-Collet holder: SK40 2 pieces-Type: Ø 63 x 150 mm-Clamping sleeve: Ø3 mm / Ø10 mm-Price/Delivery: complete-Transport dimensions: 150/120/H63 mm-Total weight: 2.6 kg

Clamping plate, welding table, welding table, straightening plate -Width: 710 mm -Length: 1010 mm -Height: 840 mm -Surface: milled -partially with threaded holes -Sheet thickness: 65 mm -Massive -Weight: 410 kg

Clamping angle, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box-Table comes from an injection molding machine-Make: Arburg-Type: Allrounder 320-210-750 KN-Dimensions table: 490 x 490 mm-Bore center: Ø 125 mm-Thread holes: M12-Dimensions: 490/490/H400 mm-Weight: 236 kg

Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet-Tool cabinet: Drawer cabinet, sturdy design-7 drawers: layout/height see photos, shelf can be opened at the top-lockable: without key-Quantity: 2x cabinet available-Price per piece-Dimensions: WTH 600/610/H950 mm-Weight: 104 kg/pc.

marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block-Prism block: for marking plate, clamping plate, straightening bench ...-Prism width: 22 mm / 90°-Dimensions: see photo technical drawing-Dimensions: 100/25/H21 mm-Weight: 0.3 kg

Tool holder, milling tool holder -Recording: SK50 -Recording tool: MK4 -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -suitable for tool changers -Number: 6 recordings available -Price: per piece -Dimensions: 240/95/H95 mm -Weight: 3.0 kg/piece

Tool holder, milling tool holder -Recording: SK50 -Recording tool: MK3 -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -suitable for tool changers -Number: 12 recordings available -Price: per piece -Dimensions: 235/95/H95 mm -Weight: 3.0 kg/piece

Square broaching tool, multi-wedge broach, broaching tool, broaching needle, grooving tool, keyway broaching tool, keyway broaching needle-Manufacturer: HS Hasseay Savage, broach push broach-Type: 11620 J9 HSS M-2-Keyway width: 20 mm-Quantity: 1 piece available-Dimensions box: 495/50/H50 mm-Weight: 2.8 kg

Underfloor sliding table saw, crosscut saw, sliding table saw, miter saw, panel saw, table saw, circular saw -Manufacturer: Ulmia, circular saw type 1612SP -Motor power: 2.2 kW / 2800 rpm -Saw blade: Ø 280 mm -Sliding carriage: is available -Max. cutting height 70 mm -Miter cut: up to 45° -Length stop: up to approx. 800 mm -Dimensions 1000/1340/H980 mm -Weight: 306 kg

Roll jaws, floating central jaws, pull-down jaws, machine vice jaws, clamping jaws-Prisms: 90°-2x thread: M16-Price: per piece-Number: 2 pieces-Dimensions: 250/40/H115 mm-Weight: 6.2 kg/piece

Quick-change chuck, quick-change holder, quick-change head, quick-change drill holder, milling holder, quick-change insert, collet chuck, reducing sleeves, clip-on holder-Quick-change chuck: Recording: MK4 / 40 mm-Dimensions: see photos-Quantity: 12x quick-change chucks available-Price per piece-Dimensions: Ø 72 x 215 mm-Weight: 2.1 kg/pc.

Three-jaw chuck, three-jaw lathe chuck-Chuck size: Ø 250 mm-Weight: 18 kg

recessed light, LED spot-Manufacturer: SBF, recessed luminaire LED spot 110V/5W/3000K-Type: A1000573-Connection: LED connector-Quantity: 1x light available-Dimensions: 100/90/H40 mm-Weight: 0.2 kg

tailstock, counter bearing for dividing head, dividing head, lathe-Tailstock: center height 150 mm-Dimensions: see drawing in the photos-Dimensions: 210/105/H240 mm-Weight: 7.0 kg

clamping head, deadbolt collet, collet sleeves, collet, tool holder, tool holder, milling holder, milling tool, clamping sleeves-Clamping sleeves: length 80 mm, 5 pieces-Sizes: Ø 15/16/20/25/30 mm-Price/Delivery: complete-Transport dimensions: 140/90/H80 mm-Weight: 1.8 kg

Clamping plate, welding table, welding table, straightening plate -Width: 745 mm -Length: 1100 mm -Height: 845 mm -partly with threaded holes -Plate thickness: 15 mm -with supporting ribs -Weight: 140 kg

Rotary table, rotary indexing table, dividing head, dividing head-Chuck size: 125 mm-Feed: Rohm-Division: 12-Height: 300 mm-Dimensions: 170/170/H300 mm-Weight: 19 kg

end mill, end mill, milling cutter -Outer diameter: 100 mm -Inner diameter: 40 mm -Teeth: 10 -Price: complete -Quantity: 3 pieces -Weight: 4 kg

Three-jaw chuck, three-jaw lathe chuck -Three-jaw chuck: without interchangeable jaws, chuck size Ø 190 mm -Passage: Ø 57 mm -Bolt circle: Ø 170 mm -Groove width: 20/12 mm -Interchangeable jaws: available in a wide selection, can be supplied for an additional charge -Dimensions: Ø 190 x 70 mm -Weight: 9.1 kg

Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, revolving drawer cabinet -Tool cabinet: Vidmar rotating drawer cabinet, sturdy design -Drawers: 6 rotating drawers, division/height see photos / height adjustable in hole pattern -lockable: without bowl -Number: 2x drawer cabinet available -Price: per piece -Dimensions: W 720/480/H 1200 mm -Weight: 106 kg/piece

Straightening ruler, straightening rail-Angle: 32°-Dimensions: 3000/50/H8 mm-Weight: 8.4 kg

Workbench, work table, assembly bench-Width: 2300 mm-Depth: 815 mm-Height: 845 mm-Thick worktop: 40 mm-Drawer: 1-Cabinet door lockable: 1-Shelves: 2-Price: per piece-Number: 2 pieces-Weight: 114 kg/piece

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set-Top jaws: rotating jaw set for four-jaw chucks, soft-Jaw width: 34 mm-Dimensions: see photo technical. drawing-Total dimensions: 140/140/H100 mm-Total weight: 8.8 kg

Fixators, leveling units, leveling elements, machine feet, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot-Transfer: in the current condition as seen-for: machine tools and systems-Dimensions: 240/150/H80 mm-Weight: 5.5 kg

Boring head, spindle head, drilling head, grooving drilling head, grooving head, spindle drilling head, boring head, spindle tool, gear motor-Spindle head: spindle tool 7.4 rpm-Gearbox: Type Z 8 i = 386-Engine: Groschopp MDM 100.70 0.25 kW-Shaft: Ø 18 mm-Dimensions: 510/185/H240mm-Weight: 12.3 kg

Bearing bushings, half-shell, drill bushing -Number: 6x AL 16065 (John Deere) Price: complete -Weight: 2.1 kg

Face plate, face plate chuck, four-jaw chuck-Chuck size: Ø 365 mm-Thread: M47x4 mm-Weight: 24 kg

Clamping plate, marking plate, measuring plate, measuring table, welding table, welding table, straightening plate, marking plate-Clamping plate: with support ribs, on steel frame-Length: 1000mm-Width: 1000mm-Plate thickness: 20 mm-Flatness: see photos (straightening sheath not included)-Transport dimensions: 1000/1000/H830 mm-Weight: 297 kg

Tool holder, milling tool holder -Recording: SK50 -Tool holder: Ø with groove -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -suitable for tool changers -Number: 28 recordings available -Price: per piece -Dimensions: 270/95/H95 mm -Weight: 3.2 kg/piece