diğer metal çalışma makineleri kullanılmış satılık (10,862)

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 22 mm -Dimensions: see photo technical drawing -Overall dimensions: 110/65/H55 mm -Total weight: 1.7 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 22 mm -Dimensions: see photo technical drawing -Overall dimensions: 90/70/H55 mm -Total weight: 1.6 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 26 mm -Dimensions: see photo technical drawing -Overall dimensions: 115/77/H70 mm -Total weight: 3.0 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 26 mm -Dimensions: see photo technical drawing -Overall dimensions: 110/80/H65 mm -Total weight: 2.8 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 26 mm -Dimensions: see photo technical drawing -Overall dimensions: 110/80/H67 mm -Total weight: 2.8 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 26 mm -Dimensions: see photo technical drawing -Overall dimensions: 110/80/H67 mm -Total weight: 2.8 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 26 mm -Dimensions: see photo technical drawing -Overall dimensions: 110/80/H67 mm -Total weight: 2.7 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 26 mm -Dimensions: see photo technical drawing -Overall dimensions: 110/80/H67 mm -Total weight: 2.8 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 26 mm -Dimensions: see photo technical drawing -Overall dimensions: 125/80/H67 mm -Total weight: 3.3 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 26 mm -Dimensions: see photo technical drawing -Overall dimensions: 110/80/H65 mm -Total weight: 2.7 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 26 mm -Dimensions: see photo technical drawing -Overall dimensions: 110/80/H67 mm -Total weight: 3.8 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw chuck, soft -Jaw width: 28 mm -Dimensions: see photo technical drawing -Overall dimensions: 90/85/H60 mm -Total weight: 2.9 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 28 mm -Dimensions: see photo technical drawing -Overall dimensions: 90/85/H58 mm -Total weight: 2.1 kg

GeneralCTX beta 1250 4A Two spindle turning centre with - partial hollow clamping device for main spindle and counter spindle internal diameter of draw tube Ø67 mm (2.63 in) x 700 mm (27.55 in) deep - 2 C-axes and spindle brakes (hydr.) - 2 12 fold Sauter star turrets reception VDI 40, DIN 69880-40 with precision interface (Trifix) and tool drive connection/drive acc. DIN 5480 - Y-axis, slide I - counter spindle slide; Control: CELOS X with Siemens 840D SL Operate Headstock, leftClamping chuck Ø315 mmSpindle nose diameter170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmDrive power (100% DC)25 kWTorque (100% DC)280 NmSpeed range0-5000 rpmC-Axis Speed2000 rpmHeadstock, rightClamping chuck Ø315 mmSpindle nose diameter170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmDrive power (100% DC)25 kWTorque (100% DC)280 NmC-Axis Speed2000 rpmSlide 1Lo ...

Key data: 1400 mm, 1100 mm

Satışta MHG'den yeni bir 160 mm basınçlı börek dolabı var. Santral 2025'te sipariş edilmiş ve Ocak 2026'da kurulmuştur. Yeni fiyat 2025 yaklaşık 19000,-€ ve 12 hafta bekleme süresi. Sadece 35 saatlik çalışma. Her gün birkaç saat ekleniyor, sistem hâlâ kullanılıyor. Kurulum alanı en az 210 cm derinliğinde olmalıdır. Patlatma odası yaklaşık 140 cm genişliğinde ve 110 cm derinliğindedir. Sistem, kauçuk kaplama, turntable ve LED aydınlatma ile sipariş edildi. Koruna ile kullanım için tasarlandı. İstekle birlikte KDV içeren bir fatura alacaksınız. Fiyat net, %19 KDV artı. Tesis hemen kullanıma sunulmaktadır. 6 veya 8 mm nozul ile sistem, 7.5 Kw kompresör + sıkıştırılmış hava akümülatörü ile bile çalıştırılabilir. Küçük parçaları patlatmak için mükemmel yeterli. İstekle daha fazla fotoğraf. Satın alma süreci içi ...

Cutting range round: 12-273mm, square: 12-200x12-200mm, rectangular diagonal: less than or equal to 273mm, profile cutting: U-, L- and H-profiles with flange lengths less than or equal to 180mm, maximum weight of a single tube: 200kg, remnant length (tailing): greater than or equal to 150mm, maximum manual loading length: 7100mm, maximum acceleration: 1.2G, maximum travel speed: 120m/min, positioning accuracy: +/-0.03mm/m, machine dimensions (with loader): 12,500x4,700x2,600mm. Equipment: Raycus 3 kW laser source, HSG Blade laser cutting head, Rexroth/SANYO DENKI/Inovance servo motor, Shimpo rack-and-pinion drive, linear guide, HSG machine platform, HSG automatic self-centering chuck, HSG X9000 control system, TTN nesting software, MOOXEE/Lanny proportional cutting gas valve (6kW), water chiller and installation kit, with documentation. The machine has not been used and an on-site inspec ...

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw chuck, 7 sets -Jaw width: 20 mm -Dimensions: see photo technical drawing -Submission/Price: complete -Dimensions/Set: 48/60/H40 mm -Weight/set: 0.8 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw chucks, 4 sets -Jaw width: 16 mm -Dimensions: see photo technical drawing -Submission/Price: complete -Dimensions/Set: 41/48/H33 mm -Weight/set: 1.6 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for four-jaw chuck, 8 sets -Jaw width: 18 mm -Dimensions: see photo technical drawing -Submission/Price: complete -Dimensions/Set: 60/72/H47 mm -Total weight: 1.4 kg/set

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw chuck, 6 sets -Jaw width: 18 mm -Dimensions: see photo technical drawing -Submission/Price: complete -Dimensions/Set: 60/55/H47 mm -Weight/set: 1.1 kg

Interchangeable jaws, top jaws, three-jaw chucks, clamping jaws, segment jaws -Replaceable jaws: soft attachment jaws, 3 sets = 9 pieces -Type: Jaw width 25 mm -Dimensions: see photo technical drawing -Submission/Price: complete -Transport dimensions: 225/85/H45 mm -Weight: 5.1 kg

Endüstriyel seri üretim için son derece verimli bir 3D yazıcı sunuyoruz Trumpf TruPrint 3000 G02, Zirox Sensör, Tek Lazer, Toz Yataklı İzleme seçenekleriyle Trumpf TruPrint 3000, filtre sistemi dahil Seri Numarası: S0721Q0022 Lazer Kilometresi: Lazer Tışını saat 17508'de Sistem nihayet Alu AlSi10MG ile kullanıldı 3D yazıcı üretici tarafından zaten sökülmüş Söküm günlükleri ve makinenin sökülmeden önce çalıştığını kanıtlayan fonksiyonel kayıtlar da mevcuttur Tüm akslar profesyonelce sabitlenmiştir Makine, normal bir standart kamyonla taşınabilir Aksesuarlar: 4 dozlama kabı 1 adet yapı silindiri 1 Kişi. Taşma Tankı Koruyucu cam gibi çeşitli yedek parçalar Kılavuzlar Armanni CAR palet kamyonu. Elev. Konteyneri de değiştirmek için stokta ve isteğe bağlı olarak sunulabilir Daha hızlı kaliteli bir 3D bi ...

Endüstriyel seri üretim için son derece verimli bir 3D yazıcı sunuyoruz Sistem nihayet alüminyum tozu AISi10MG ile kullanıldı 3D yazıcı üretici tarafından zaten sökülmüş Söküm günlükleri ve makinenin sökülmeden önce çalıştığını kanıtlayan fonksiyonel kayıtlar da mevcuttur Tüm akslar profesyonelce sabitlenmiştir Makine, normal bir standart kamyonla taşınabilir TruPrint 5000 G4 Seri Numarası S0731C0008 İnşaat yılı 08/2018 Uçuş Zamanı Lazeri Lazer 1 Tışını Açık: 5165 saat Lazer 2 Tışını Açık: 5096 saat Lazer 3 Tışını açık: 5023 saat Trumpf TruPrint 5000, Toz Yatak İzleme ve Melt Poll Monotoring seçenekleriyle birlikte Filtre sistemi Aksesuarlar: 2 kişi. Silindir Yap 3 kişi. Dozaj silindiri 1 adet taşma tankı kullanıldı 1 Pc. Taşma Tankı YENİ Kılavuzlar 4 Isı Değiştirici YENİ 2 a ...

An electric Nabertherm shuttle kiln for firing ceramics, stoneware and soft-paste porcelain is offered. Connected load: 69kW, maximum temperature: 1340°C, volume: approx. 1000l, internal dimensions X/Y/Z: 800mm/1600mm/800mm, control system: Nabertherm C19 program controller. Equipped with automatic exhaust-air flap control, motorized ceiling flap and removable lifting eyes. Overall dimensions X/Y/Z: approx. 1300mm/2200mm/1840mm, weight: approx. 3000kg. Documentation available. An on-site inspection is possible.

This 5-axis AGIE Agiecut Challenge 2 wire EDM machine was manufactured in 2002. It has a weight of 3600 kg and operates at a power of 9 kVA. The machine includes additional equipment such as an ICS Cool Energy i-Chiller external cooling unit and a standalone operator console terminal with screen, keyboard, and mouse. If you are looking to get high-quality wire EDM capabilities, consider the AGIE Agiecut Challenge 2 machine we have for sale. Contact us for further details.

Clamping angle, clamping aid -Clamping angle: for workpiece clamping -Groove width 27 mm -Number: 3x mounting brackets available -Price: per piece -Dimensions: 280/250/H290 mm -Weight: 13.5 kg/pc.

Clamping angle, clamping aid -Clamping angle: for workpiece clamping -Groove: 100 x 36 mm -Dimensions: 250/180/H280 mm -Weight: 10.7 kg

Clamping angle, clamping aid -Clamping angle: for workpiece clamping -Groove: 100 x 36 mm -Dimensions: 250/160/H280 mm -Weight: 11 kg

Clamping angle, clamping aid -Clamping angle: for workpiece clamping -Wall thickness: 36 mm -Groove: 72x22 mm -Dimensions: 370/205/H240 mm -Weight: 32.6 kg

Clamping angle, clamping aid -Clamping angle: for workpiece clamping -Groove width 27 mm -Dimensions: 280/250/H320 mm -Weight: 13 kg