diğer metal çalışma makineleri kullanılmış satılık (11,006)

This 5-axis +GF+ AGIECHARMILLES CUT 400 Sp was manufactured in 2017. It features a Wire Guide Set for Ø 0.250 mm and a Taper Tapering Kit for 45° taper cuts. If you are looking to get high-quality wire EDM capabilities, consider the +GF+ AGIECHARMILLES CUT 400 Sp machine we have for sale. Contact us for further details.

This 4-axis HUBER River 600 CNC was manufactured in 2017. It features a traverse of 600 x 400 mm in the X and Y directions, and a Z-axis travel of 300 mm. The machine accommodates electrode diameters ranging from 0.3 to 3.0 mm. If you are looking to get high-quality small hole drilling capabilities, consider the HUBER River 600 CNC die-sinking EDM machine we have for sale. Contact us for further details.

Content consisting of external micrometers, calipers, Allen keys, setting rings.

TRUMPF HL 3006D – endüstriyel 3 kW lazer kaynağı / katı hal lazeri Satılıkta ikinci el endüstriyel lazer kaynağı TRUMPF HL 3006D bulunmaktadır. Lazer cihazı, endüstriyel bir lazer kaynak sisteminden geliyor ve TRUMPF TrumaWeld L1000 ile birlikte kullanılmıştır. Teknik veriler / ekipman: Üretici: TRUMPF Model: HL 3006D Lazer gücü: 3.000 W / 3 kW Endüstriyel Yüksek Güçlü Lazer Kaynağı Versiyon: HL-D serisi Ayrı soğutma bağlantıları mevcut Orijinal TRUMPF dokümantasyonu kısmen mevcut Kablo şeması mevcut Arayüz açıklaması mevcut WinLas yazılım kılavuzu mevcut Cihaz şu anda depoda ve bağlı değil. Bu nedenle güncel bir işlevsel test veya güç altında gösterim şu anda mümkün değildir. Lazer kaynağı ayrı ayrı sunulmaktadır. Uyumlu bir TRUMPF TrumaWeld L1000 ve M.T.A. TAE 502 endüstriyel soğutma ünitesi ayrıca ay ...

Tool presetter for SK 50 and SK 40 tool holders, incl. granite measuring plate

A mass finishing system with dosing equipment is offered. Operator panel on the control cabinet. Equipped with dosing unit, control cabinet, safety enclosure, stairs and conveyor chute. Inspection possible by prior arrangement.

Rotary table wheel blast machine manufactured in 2006. This C.M. T-10 features a turntable diameter of 1,000 mm and a usable height in the workspace of 450 mm. It has a maximum permissible table load of 900 kg and operates with a blast wheel power of 5.5 kW. If you are looking to get high-quality blasting capabilities, consider the C.M. T-10 machine we have for sale. Contact us for further details.

This 5-axis JUARISTI 12/TS1.7 boring machine was manufactured in 1991. It features a substantial X-axis travel of 2000 mm, Y-axis travel of 1200 mm, and Z-axis travel of 1200 mm. The CNC rotary table dimensions are 1000 x 1200 mm, with a maximum table load of 6000 kg. If you are looking to get high-quality boring capabilities, consider the JUARISTI 12/TS1.7 machine we have for sale. Contact us for further details.

Additional technical specifications:• Diameter of storage surface: 50 mm• Incl. digital display• Incl. table booklet for hardness tests• with workbench

Content consisting of an attached vise, jaw width: 125 mm and various hand tools.

Kalıp döküm makinesi Frech DAW 125 F, Bj, 2007,

1999'da üretilen Frech DAW 125 S DV döküm makinesi,

2003 yılında üretilen Frech DAW 80F RC döküm makinesi,

A used sinker EDM machine is offered for sale. Equipped with F 100 filtration system. Inspection possible by appointment.

A case annealing system is offered for sale. With digital temperature control. Equipped with ammonia dissociator and control cabinet. Inspection possible by appointment.

This 5-axis Mitsubishi MP1200 wire EDM machine was manufactured in 2021. It features a robust design with a machine weight of 2700 kg and is equipped with the advanced D-CUBES controller. If you are looking to get high-quality wire electrical discharge machining capabilities, consider the Mitsubishi MP1200 machine we have for sale. Contact us for further details.

This 3-axis MAHR Compakt 400 was manufactured in 2001. It features optical and tactile measurement functionality, allowing for precise measurement of rotationally symmetrical components. The machine includes a rotary axis with a Sanyo Denki motor drive, a 6-position probe change rack, and multiple probe configurations. If you are looking to get high-quality measurement capabilities, consider the MAHR Compakt 400 CMM machine we have for sale. Contact us for further details.

This 3-axis TESA Scan 52 was manufactured in 2010. It features a diameter measuring range of 0.5 - 52 mm and a maximum workpiece length of approximately 300 mm. The machine is equipped for dynamic display of measurement results and non-contact optical measurement, making it suitable for both static and dynamic measurements. If you are looking to get high-quality optical measurement capabilities, consider the TESA Scan 52 optical measurement machine we have for sale. Contact us for further details.

Underfloor circular saw, cut-off saw, miter saw, panel saw, table saw, circular saw, construction site circular saw -Manufacturer: Hanning, table saw, construction site circular saw -Type: HTK 315/2-Q62 -Motor power: 2.2 kW / 2720 rpm -Voltage: 380 V / Connector pole-changing -Saw blade: max. Ø 315 mm -Cutting height 75 mm -Stop holder: without stop -Dimensions 890/720/H900 mm -Weight: 43 kg

DIBO ECN-L High-pressure cleanerManufacturerDIBOModelECN-LConditionuntestedLocation35614 Aßlar DELot6

3D koordinat ölçüm makinesi Üretici: Wenzel Type Smarth CMM Granit levha L x B 1640 x 700 Üretim yılı 2005 PC s, kullanıcı kılavuzu, yazılım dahil Makine %100 iyi ve kullanılmış durumda.

Workbench without contentsConditionuntestedLocation35614 Aßlar DELot27

Lot of collets 173 E consisting of various manufacturers, diameters see pictures, round, square and hexagonal.

• 1 x BERG, type: KH 250, diameter: 250 mm• 1 x SCHUNK, diameter: 165 mm• incl. clamping jaws and a special chuck

Consisting of SCHUNK clamping jaws, various types and sizes, 2- and 3-piece sets, with T-nuts and screws as well as reduction sleeves in various sizes.

With mounted vise, jaw width: 125 mm, with inventory of two cordless screwdrivers, hand saws, brushes, files and cutting discs.

Content consisting of a mounted vice, jaw width: 125 mm as well as various turning tools, indexable inserts, hand tools

consisting of 3 pieces

Adapters for HSK and SK 50 as well as SK 40 tool holdersAdditional technical specifications:• Operating pressure: 4 - 6 bar• Frequency: 50/60 Hz

GARANT 363010-125 5-Axis Clamping SystemManufacturerGARANTModel363010-125ConditionuntestedLocation63843 Niedernberg DELot70