diğer metal çalışma makineleri kullanılmış satılık (11,436)

Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet-Tool cabinet: Drawer cabinet, sturdy design-7 drawers: layout/height see photos, shelf can be opened at the top-lockable: without key-Dimensions: WTH 600/620/H960 mm-Weight: 105 kg

Chuck flange, flange mount, lathe chuck flange, driving flange-Chuck flange for: three-jaw chuck, four-jaw chuck, face plate-Outer diameter: 188 mm-Hole circle: Ø 132/4 x M12, 4 x M14-Hole circle: Ø 173/Ø 9 mm-Dimensions: Ø 188/H97 mm-Weight: 6.5 kg

Clamping plate with T-slots, plate field, welding table, welding table, plate boring machine, T-slot plate -Table width: 800 mm -Table length: 1000 mm -Table thickness: 35 mm -Table height: 765 mm -Plate: Solid cast steel -Groove width: 22 mm -Groove spacing: 100 mm -Plates bottom: Ring T-slot Ø 700 mm M12 -Equipment: with bench vice -Overall dimensions: 1300/1050/H1000 mm -Weight: 472 kg

Tool holder, milling tool holder -Recording: SK50 -End milling cutter: MK3 -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills -Weight: 3 kg

Shaft vise, machine vise -without: prism -Dimensions: 365/205/H175 mm -Weight: 20 kg

Probe, 2D probe, probe insert, probe head, Digimatic Indicator, scanning head, measuring head, universal 2D probe, probe tip, rotary/swivel head, probe head, rotary/swivel head, edge finder -Manufacturer: Tschorn, edge finder type 2D/Ø16 -Item No.: 0010216RO -Sensing ball: Ø 10 mm -Dimensions: 110/30/H30 mm -Weight: 0.1 kg

Fixators, leveling units, leveling elements, machine foot, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot -for: machine tools and equipment -Installation height: 50 mm -Recording: M16 -Quantity: 6 pieces -Price: complete -Dimensions per piece: 168/168/H50 mm -Weight per piece: 1.9 kg

Hydraulic vice, machine vice, hydraulic vice, high pressure vice, hydraulic vice, NC power clamp, NC power vice -Handover: in the current state as viewed -Spindle bent: vice does not open -Machine vice: with turntable -Jaw width: 200 mm -Back height: 60 mm -Span width: max. 205 mm -Dimensions: 700/395/H205 mm -Weight: 117 kg

Polycarbonate, plexiglass, acrylic glass, acrylic glass-Plastic panels: transparent-the panels are covered on both sides with protective film-the panels can be cut with guillotine shears-the panels are flexible but not suitable for bending-Length: 3000 mm-Width: 2000 mm-Thickness: 2 mm-partly slight damage to the edges-Number: 20x pieces available-Price: per piece-Weight: 14.5 kg/piece

Chuck flange, flange mount, lathe chuck flange, driving flange-Chuck flange for: three-jaw chuck, four-jaw chuck, face plate-Outer diameter: 250 mm-Hole circle: Ø 232/Ø 12 mm-Dimensions: Ø 250/H26 mm-Weight: 5.6 kg

Clamping bracket, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Version: heavy -Groove: 24 mm -Slot spacing: 80 mm Quantity: 1 piece -Dimensions: 360/285/H245 mm -Weight: 70 kg

Clamping plate, scribing spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate-Length: 1200 mm-Width: 800 mm-Height: 170 mm-Plate thickness: 30 mm-with: support ribs-Weight: 328 kg

Clamping plate, unit carrier, milled surface, welding table, welding table -Clamping surface width: 460 mm -Length of clamping surface: 9090 mm -Table height: 206 mm -Working height: 350 mm -Transport dimensions: 9090/490/H350 mm -Weight: 2300 kg

Thread cutting chuck, thread chuck, tap chuck, milling tool, thread cutting apparatus-Manufacturer: WMW ABW, tapping chuck holder MK3-Type: GB3-Bore: Ø 24 mm-Dimensions: Ø 80 x 264 mm-Weight: 3.7 kg

Bezel, stick, lynette-max. Passage: Ø 30 mm-Tip height: 175 mm-Drawing: in the photos-Dimensions: 425/130/H390 mm-Weight: 10.8 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws-Top jaws: Jaw set for three-jaw lathe chucks, hard-Jaw width: 21 mm-Dimensions: see photo technical. drawing-Total dimensions: 75/65/H55 mm -Total weight: 1.2 kg

Console, base body, device, clamping angle, clamping table, clamping cube, clamping plate, clamping tower -Price: per piece -Number: 2x available -Console: as a base for fixtures -Dimensions: 720/350/H910 mm -Weight: 170 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws-Top jaws: Jaw set for three-jaw lathe chuck, soft-Jaw width: 20 mm-Dimensions: see photo technical drawing-Total dimensions: 65/60/H50 mm-Total weight: 1.3 kg

Bezel, stick, lynette -max: passage: Ø 210 mm -Top height: 300 mm -Edition: gray cast iron -technical drawing with the photos -Dimensions: 660/600/H120 mm -Weight: 59 kg

tool holder, milling holder, milling tool, long milling mandrel, attachment holder-Milling holder: SK40 holder-Type: SK40 x 40 x 400-Shaft: Ø 32 mm-Dimensions: Ø 62 x 590 mm-Weight: 8.6 kg

Angle bracket, locksmith square, flat angle -Flat angle: Leg length 400 x 195 mm -Quantity: 1x flat angle available -Dimensions: 400/195/H10 mm -Weight: 2.2 kg

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Mouth size: Ø 250 mm -Passage: Ø 80 mm -Recess: Ø 210 mm -Weight: 18.5 kg

Tool holder, milling holder, milling tool, cutter head, milling arbor-Manufacturer: W&F, milling adapters SK50 18 pieces-9 pieces: Drm. 16 x 100 mm-2 pieces: Drm. 20 x 100 mm-3 pieces: WE 14x120 Z-1 piece: WE 14x160 Z-1 piece: Drm. 12 x 120 mm-1 piece: Drm. 18 x 160 mm-1 piece: Drm. 18 x 160 mm-Various types: see photos, more pictures can be sent-Price / fee: complete-Dimensions: 600/400 / H220 mm-Weight: 69.1 kg

Tool holder, milling holder, collet holder, collet chuck, chuck, milling tool, adapter, clamping unit, tool holder,-Milling holder: SK40 5 pieces-Mounting: Ø 33 mm: 2x Ø 28 mm / 1x Ø25/30/32 mm each-Versions: see photos-Price/Delivery: complete-Transport dimensions: 220/130/H190 mm-Total weight: 8.4 kg

Four-jaw chuck, four-jaw lathe chuck, 4 jaw chuck-Type: DH250x4/TGL30-2332-Chuck size: Ø 250 mm-Throughout: Ø 80 mm-Rezess: Ø 210 mm-Hole circle: Ø 230 mm-Number: 3x available-Price: per piece-Weight: 18 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws -Manufacturer: Schunk, Top jaws for power chucks, 3 sets -Type: SFA-AL 315, see photos -Hole spacing: 54 mm -Price/Sale: only complete set -Overall dimensions: 160/215/H90 mm -Weight: 6.8 kg

Boring head, spindle head, drilling head, grooving drilling head, grooving head, spindle drilling head, boring head, universal drilling head, boring tool, facing head -Manufacturer: Schmid, plan and boring head -Type: S.AdK 6 -Recording: SK50 -Adjustment accuracy: 0.01 mm -Dimensions: 175/150/H305 mm -Weight: 24 kg

Faceplate, faceplate chuck, four-jaw chuck -Handover in its current condition as inspected -Mouth size: Ø 500 mm -one threaded insert is missing -all 4 cheeks are missing -Cone: Ø 105 mm -Through hole: Ø 80 mm -Bolt circle: Ø 132 mm -Weight: 45 kg

Clamping clamps, pointed filing clamps, hand filing clamps, screw clamps, steel construction clamps, clamps, clamping tools-Inside diameter: 104 mm-Dimension: Ø 155/30 mm-Weight: 2.1 kg

CNC pull studs, tool holder, tool holder, milling holder, milling tool -Number: 8 pieces -with: ring groove -for: SK40 holders -Thread: M16 -Price: complete -Weight: 0.6 kg