delik işleme değirmenleri ve işleme merkezleri kullanılmış satılık (3,224)

x-travel:8500 mmy-travel:2000 mmz-travel:1500 mmrapid travel x/y/z:25 m/mintable-size:10.000 x 1.350 mmtable load:max. 5 t/qmuniversal head:orthogonal 1° x 1° tool taper:SK 50 milling head speed:4.000 1/minpower capacity:37 kWmax. torque on the spindle:900 Nminternal coolant system feed:15 barcontrol:HEIDENHAIN iTNC 530 Tool changer:60 Pos. total power requirement:75 KWdimensions of the machine ca.:12,7 x 5,2 x 4,6 mweight of the machine ca.:35 tuniversal travelling column - universal machining center,orthogonal milling head, water-cooled, with 1° indexing in 2 axis (360 pos. in rear layer, 270 pos. in front layer)3D touch probe M&H 20.41,dividing wall for 2 table machining,internal air blast,15bar high pressure pump,prepared for HSC milling heads incl. torque support,moveable operator-cabin/panel,chipconveyor,handwheel HR 410,controlled security fence,miscellaneous accessories (angle ...

: neu : ca. 8 Wochen ab Auftragse : Spanien : 12570 €: 241.34 €: 50 mm: MK 4 : 350 mm: 93 - 152 - 204 - 298 - 44 U/min: 3 kW: M35 : 480 mm: 755 mm: 2265 mm: 435 kg: 0,1 / 0,18 / 0,24 mm/U: 180 mm: 150 mmERLO (MADE IN SPAIN)FOR DEMANDING WORKSHOP USEGear drive3 aut. feedssliding machine tablesolid drill headtiltable turntablefront wheel for sensitive fine feed(sample photo)OPTIONS (PRICES ON REQUEST):lighting equipment Lcoolant equipment and machine base with T-slots ERBReverse for tapping IR/RSThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel:1000 mmy-travel:1100 mmz-travel:810 mmcontrol:iTNC 530 HEIDENHAINturning speeds:18000 1/mintool taper:HSK 63 table surface area:1.000 x 800 mmmax. swing dia.:1350 mmmax. table load:1.000 kgtool magazin::273 Pos.rapid traverse:60 m/mintotal power requirement:86 kWweight of the machine ca.:18 tdimensions of the machine ca.:4,3 x 6 x 3,4 m5-axis simultan universal machining center,NC-rotary-table (C-axis) and B-axis (milling head),DDT-spindle for high torque (HT - max. 3000 rpm - 291/226Nm) and high speed (HS max. 18.000 rpm - 83/63Nm ),- internal coolant supply 50bar with chipconveyor and paperfilter,el. handwheel,oilmist suction,DCM collision control,Hours on counter:approx. 45.000h "machine on", approx. ca. 2.000h " HT-spindle on", approx. ca. 12.000h " HS-spindle on"NEW SPINDLE IN 09/2025 !

x-travel: 600 mmy-travel: 450 mmz-travel: 450 mmcontrol: Heidenhain iTNC530 total power requirement: kWweight of the machine ca.: 6100 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 800 mmy-travel: 600 mmz-travel: 500 mmcontrol: Heidenhain iTNC 530 total power requirement: kWweight of the machine ca.: 8300 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel:1400 mmy-travel:1200 mmz-travel:1350 mmcontrol:MSX- 701 Mapps III table surface area:800 x 800 mmrapid traverse:50 m/mintable rotating:360.000 x 0,001 B-Achse °table load:2,0 tnumbers of pallets:2 turning speed range:8000 1/minpower capacity - milling spindle:37 kWno. of tools in the magazine:60 Stücktool taper:HSK-A 100 weight:31 tdimensions:5,9 x 3,48 x 3,68 mEquipment:- Thru-the-spindel coolant system Mayfran Consep 2000 70 bar with chipconveyor - Helical cutting + Synchronized tapping- Parts program memory 1 MB - Knoll 70 bar high pressure and filter system- Electrostatic oil dust collector LTA- elect. hand wheel- renishaw probe- abso- scale i X/Y/Z- axis- 5 free m- funktions- 48 extra off sets- dual ballscrews on X/Y/Z- axis

x-travel:560 mmy-travel:560 mmz-travel:660 mmcontrol:Celos Siemens 840D SL Operate ERGOline Multitouch turning speeds:20 - 20.000 1/minspindle drive:25/ 35 kWmax. torque on the spindle:86 / 130 tool taper:HSK-A63 Number of tool station:60 diameter of tools max.:70 mmTool diameter with no neighbouring tools:170 mmtool length - max.:450 mmweight of tools max.:12 kgnumbers of pallets:2 Pallet dimension:400 x 400 mmmax. workpiece diameter:630 mmworkpiece height max.:900 mmtable load:400 kgrapid travel x/y/z:60 m/minFeed x/y/z:60 m/mininternal coolant system feed:70 barweight of the machine ca.:8,5 tdimensions:3200 x 4800 x 2900 mmRenishaw probe (spindle):Vorbereitung / preparation only Horizontal machining center with Siemens - Celos control, full b-axis, tool magazine with 123 pos. HSK-A 63, coolant through spindle 40 bar.The machine has just received a new milling spindle.

x-travel:1530 mmy-travel:530 mmz-travel:465 mmside by side, right side fixed table X =:925 mmside by side left side 2 axis table X =:780 mmcontrol:Heidenhain TNC 640 tool magazin::122 SK 40 spindle turning speed - stepless:12.000 1/minSpindle Torque:120 Nmpower capacity:22 kWFixed Table Dimensions:920 x 540 mmTable load fixed table:2000 kgMax. parts size on fixed table:900 x 500 x 400 mmDiameter of integrated 2-axis rotary table:650 mmTable load rotary table:500 kgB-axis swivel angle:-90°/+110° ° / degMax. parts size on rotary table:600 x 500 x 400 mmMax. Parts size over both tables:1500 x 500 x 400 mminternal coolant system feed:70 bar barweight of the machine ca.:10,5 tdimensions of the machine ca.:3,65 x 2,53 x 2,81 mpendant hand wheel:HR 510 FS Measuring probe for work piece:Blum TC 52 The SpinnerU5 1530 5-axis machine with Heidenhain iTNC 640 control is as new, in excelllent con ...

x-travel:800 mmy-travel:950 mmz-travel:1020 mmcontrol:Sinumerik 840D sl MDynamics Operate turning speeds:10.000 1/minSpindle power:26/20 kWmax. torque on the spindle:340/262 Nmtool taper:HSK-A 100 tool change unit:120 (2x60) Pos.Pallet changer 2x:630 x 630 mmtable load capacity:800 kgweight of the machine ca.:20 tdimensions of the machine ca.:3,3 x 6,15 x 3,2 m6-axis simultaneous horizontal machining center with controlled swivel-rotary table (A/B-axis), Swivel table can swing overhead (180°), that means the part is hanging down overhead and chips don?t accumulate on pallet, they can fall free into the chip conveyorCNC controlled U-axis enables radial movement of tool for variable spindling diamenter.twin pallet changer 630 x 630 mm6 hydraulic couplings for pallet fixture clamping with rotary joint in A and B-axisspecial hydraulic pump for fixturecoolant through spindle (10-80bar), one ...

bore capacity in steel (diameter): 32 mmthroat: 310 mmbore stroke: 175 mmspindle taper MT: MK3 table-size: 570 x 475 mmspindle turning speed - stepless: 60 - 1600 U/minvoltage: 400 Vcolumn diameter: Ø145 mmquill feed: 0,1-0,16-0,25 mm/Utotal power requirement: 1,1/1,8 kWweight of the machine ca.: 450 kgdimensions of the machine ca.: 0,70 x 1,10 x 2,10 m- Serial-No.: 121950- Stepless speed control- Automatic vertical feed- Built-in machine lightThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Auction-ID: A1-45239-2143

Auction-ID: A1-45188-32

x-travel: 1016 mmy-travel: 508 mmz-travel: 635 mmControl: HAAS spindle turning speed range: 8000 U/minspindle taper: 40 table-size: 1219 x 457 mmtable load: 1,588 tWorking speed: 16,5 m/mintool piece magazine with: 24 total power requirement: 22,4 kWweight of the machine ca.: 6,3 tdimensions of the machine ca.: TBH 2,48 x3,15 x2,5 (2,9) mWell-maintained machine with only 1,603 operating hours- Includes 4th axis HAAS HRT310- Includes tailstock for 4th axis- Includes Renishaw HAAS WIPS Wireless Intuitive Probing System- Includes 48 tool holders, some with tools- Includes chip conveyor- Includes internal spindle coolant- Includes programmable coolant nozzle- Includes USB interface- Includes network connectionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

equipped with automatic cooling system; unused; in suitcase; 5637 Auction-ID: A1-45506-308

Auction-ID: A1-45188-98

Technical data Machine Type: Boom Radial Drilling Machine Manufacturer: Csepel Machine Tool Factory Budapest Model: RFh 75/1500 Serial Number: 78156 Voltage: 380 V Control voltage: 110 V Current Type: 3~ Operating current: 23 A Max. drilling diameter steel: 75 mm Max. Cast Iron Drilling Diameter: 90 mm Speeds: 21 levels Speed range: 19 – 1900 rpm Feeds: 12 stages Feed range: 0.047 – 2 mm/rev Column diameter: 450 mm Clamping surface: 1800 x 1100 mm T-slots: 4 x 200 mm Machine weight: approx. 6276 kg Configuration Machine with large clamping table, mechanical speed and feed adjustment as well as solid column construction. Auction-ID: A1-45239-2191

: neu : ca. 12 - 14 Wochen ab Auf : Spanien : 50410 €: 952.75 €: 35 mm: MK 4 : 390 mm: 94- 2.225 (16) 50 Hz 113 U/min: M35 : 1660 mm: 1510 mm: 2600 mm: 910 kg: 180 mm: 190 - 650 mm: 1310 mm: 125 mm: 400 x 420 mm: 0,10 - 0,18 - 0,24 (3) mm/min: 750 - 1.500 U/minERLO (MADE IN SPAIN)FOR DEMANDING WORKSHOP USEdrilling and milling machineautomatic feedprecision electromagnetic clutchesgeared drivecross tablefixed base and displaceable headstockcontrol panelcooling equipment with electric motor pumphand wheel for fine tuningclamping device for toolsadjustable stopdrill guardOPTIONAL EQUIPMENT (PRICES ON REQUEST):Digital read out for drilling depthTapping deviceMotorized longitudinal and/or transverse feedDigital read out for table axes and/or drill head height adjustmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Auction-ID: A1-45188-223

Equipped with CH-2 140mm machine clamp Auction-ID: A1-45188-134

Auction-ID: A1-45188-9

Auction-ID: A1-45239-2207

: neu : ca. 8 Wochen ab Auftragse : Spanien : 6840 €: 132.01 €: 25 mm: MK 3 : 250 mm: 245 - 4000 U/min: 0,7 / 1,3 kW: M18 : 400 mm: 655 mm: 1900 mm: 280 kg: 120 mm: 100 mm: 85 - 635 mm: 1.195 mm: 300 x 270 mm: 600 x 380 mmERLO(MADE IN SPAIN)FOR MANUFACTURING USEV-belt drivemanual feedleft-right drillingtool ejectoradjustable depth stoptable with T-slotsdrill guard with micro switchlightening equipmentuser manual in English or GERMANCEOPTIONS (PRICES ON REQUEST):Variable speed incl. digital display (VE+TAK)Tapping device (IR/RS)Coolant equipment incl. T-slots in the ground plate (ERB)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Auction-ID: A1-45188-100

Unused machine Auction-ID: A1-45188-20

: neu : ca. 8 Wochen ab Auftragse : Spanien : 11530 €: 221.38 €: 40 mm: MK 4 : 300 mm: 75 - 150 - 235 - 325 - 47 U/min: 1.3 kW: Stahl: M 30, Guss: M 32 : 600 mm: 640 mm: 2020 mm: 305 kg: 0,1 — 0,2 — 0,3 mm/U: 160 mm: 125 mm: 420 x 400 mmERLO (MADE IN SPAIN)FOR DEMANDING WORKSHOP USEgeardrive machine2 aut. feedsleft-right drillingdrill guardCE normsuser manual in GERMANOPTIONS (PRICES ON REQUEST): lighting equipment coolant equipment and machine base with T-slots Reverse for TappingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Demonstration machine! Pneumatically driven tapping machine for M3 - M12 threads with: - Stable and flexible working arm. - 6 quick-change chuck with slipper clutch. Documentation in English Thread diameter M3 - M12 mm Speed infinitely variable 400 rpm. Torque 25 Nm Air pressure 6 - 8 bar Working range radius 1000 mm Machine weight approx. 12 kg suitable clamping table Lot 224, 254 or 265. Auction-ID: A1-45681-776

Auction-ID: A1-45188-159

x-travel: 1300 mmy-travel: 670 mmz-travel: 625 mmcontrol: Siemens Sinumerik 828D total power requirement: kWweight of the machine ca.: 8500 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 710 mmy-travel: 610 mmz-travel: 610 mmcontrol: Fanuc - 18 MC total power requirement: kWweight of the machine ca.: 11500 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1020 mmy-travel: 510 mmz-travel: 510 mmtotal power requirement: kWweight of the machine ca.: 9000 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.