delik işleme değirmenleri ve işleme merkezleri kullanılmış satılık (3,224)

x-travel: 835 mmy-travel: 510 mmz-travel: 510 mmCNC-control: SIEMENS table-size: 1000 x 560 mmmax. table load: 800 kgspindle taper: SK 40 spindle turning speed range: 20 - 8.000 U/minfeed stepless: 1 - 20.000 mm/minrapid traverse: 20 m/mindrive capacity - spindle motor: 13 / 9 kWtool change unit: 20 Poscoolant: voltage: 380 Vtotal power requirement: 35 kVAweight of the machine ca.: 4,5 tdimensions of the machine ca.: 3,50 x 3,50 x 2,70 m- Serial No.: 15415027604- machine as good as new- Machine ON: 2.599 h program ON: 1.027 h- tool measurement BLUM-MICRO incl. calibration tool- infrared probe HEIDENHAIN TS 640- Tool changer 20 pos. with double gripper- chip tray (no chip conveyor)- div. tool holder- coolant unitThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1.035 mmy-travel: 560 mmz-travel: 510 mmCNC-control: HEIDENHAIN TNC620 table-size: 1200 x 560 mmmax. table load: 1000 kgspindle taper: SK 40 spindle turning speed range: 10.000 U/mindrive capacity - spindle motor: 13 kWfeed stepless: 20.000 mm/minrapid traverse: 25 m/mintool change unit: 20 Pos.coolant: IKZ 20 bar voltage: 400 Vtotal power requirement: 17 kVAweight of the machine ca.: 4,1 tdimensions of the machine ca.: 2,55 x 2,30 x 2,25 mchip conveyor: 3,90 x 0,95 x 1,60 mcoolant tank: - Serial No.: 1539000377A- Machine ON: 21.689 h- Program Run: 9.021 h- CNC-Control: Heidenhain TNC620- elektronic hand wheel- chip conveyor- coolant through spindle 20 barThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

full boring: 150 mmbore depth: 13000 mmfull boring: 150 mmworkpiece weight: 80 tcontrol: Siemens type: S 7 workpiece dia.: 1250 mm0: 2000 mmborehole diameter: 450 mmtotal power requirement: kWweight of the machine ca.: 160 tdimensions of the machine ca.: mHeadstock adjustment 10,000mmHeadstock bed bed width 1600mm, guideway width 360Center height of headstock 1600 mmFace plate 1750 mmDrive 60 KWSpeed 2.62-200 rpmBed for drilling unitBed length 27,000 mmBed width 1320 mm Guideway width 290 mmheight of the bed 670 mmDrill motor 60 KWDrilling unit Sph 920 mmThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If y ...

x-travel: 1400 mmy-travel: 1200 mmz-travel: 1325 mmcontrol: Mazatrol Smotth G numbers of pallets: 2 size of pallet: 800 x 800 mmmax. workpiece height: 1450 mmmax. workpiecediameter: 1450 mmturning speed range - milling: 10000 U/mintool taper: BT 50 Tool changer: 120 pos.power capacity - milling spindle: 37 kWb-axis (table): 360000 x 1 °rapid traverse: 60 m/minworkpiece weight: 2200 kgtotal power requirement: 102 kVAweight of the machine ca.: 31 tdimensions of the machine ca.: 3,88 x 8,05 mequipped with:- CNC Control MAZATROL Smooth G- ATC 120-fold (BT 50)- Chip Conveyor- HP Coolant with internal Spindle Cooling 70 BAR- 360000 ° positions indexing table- pallet changer with safety cover (2 Pallets)- Spindle cooling unit- Flood cooling- Niagara cooling / rinsing system- Blowout through the spindle- Coolant and chip protection through fully enclosed working space- Workspace door lock- wor ...

X-Seyahat: 650 mmy-Yolculuk: 650 mmz-Seyahat: 680 mm Çalışma saati sayısı: 55.000 salat konik: HSK 63 dönme mil: 85 mil dönüş hız aralığı: 20.000 U/minZincir tipi alet şarjörü: 60 pozisyonÇip konveyörüPalet değiştiriciSoğutma sıvısı filtrasyon sistemi, mil üzerinden yüksek basınçlı soğutma sıvısıBu reklamın verileri, LogoTech oHG'nin yazılım çözümü olan ModulMWS ile oluşturulmuştur.

X-Seyahat: 1200 mmy-Yolculuk: 950 mmz-yolculuk: 1200 mmB-eksenli hareket: 0 – 360A-eksen hareketi: +45 ila -90Takım tutucu mil: HSK 100Tork mil: 200 mmMil hızı: 15.000 rpmZincir tipi alet şarjörü: 60 pozisyonPalet değiştiriciÇip konveyörüMil üzerinden yüksek basınçlı soğutma sıvısıSoğutma sıvısı filtrasyon sistemiBu reklamın verileri, LogoTech oHG'nin yazılım çözümü ModulMWS ile oluşturulmuştur.

Item sold in NOT verified status. Auction-ID: A7-44984-1

: 40 mmthreading in St 60: M24 threading in GG 20: M30 Short spindle: MK 3 Center of spindle to wall or column: 293 mmspindle turning speed - stepless: 160 - 2250 U/minColumn diameter: 115 mmspindle stroke: 120 mmMachine table - usable table surface: 514 x 360 mmT-Slots Amount - Width - Distance: 2 x 14 x 224 mmDistance spindle-table min.: 117/701 mmfeed: 0,10 + 0,20 mm/UMotor output: 1,45 / 1,9 kWheight of the machine: ca. 1840 mmweight of the machine ca.: 285 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1626 mmy-travel: 1016 mmz-travel: 762 mmCNC-control: HAAS CNC Table dimensions: 1626 x 914 mmmax. table load: 1814 kgspindle taper: BT 40 spindle turning speed range: 15000 U/minspindle motor: 22,4 kWfeed range: 1270 mm/minrapid traverse: 15,2 m/mintool change unit: 30 Pos.coolant: IKZ total power requirement: kWweight of the machine ca.: 11,2 tdimensions of the machine ca.: 4,91 x 3 x 3,43 mEquipped with:- HAAS CNC control- Fixed table- Chip conveyor- IKZ- 31-position tool changer (BT 40)The machine has only 1,200 operating hoursThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 500 mmy-travel: 450 mmz-travel: 400 mmcontrol: SlimLine SiemensMain spindle:: turning speed range - main spindle: max. 12.000 min/-1power capacity - main spindel: 13 / 9 kWmax. Torque: 83 / 57 Nmtool taper: SK 40 NC-Tilting round table:: table surface area: 630 x 500 mmmax. table load: 200 kgSwivel range: B: -5 / +110 °rotation range: C: 360 °T-slots: 7x 14 x 63 mmtool magazin:: number of toolpositions: 30 pos.max. tool weight: 8,0 kgmax. tool diameter: 80 mmmax. tool-dia with free toolbox: 130 mmmax. workpiece length: 300 mmchange-time tool to tool: 2,7 secchange-time chip to chip: 7,0 secfeeds:: rapid traverse: X/Y/Z: 30 m/minFeed force: 4,5 kNfeed speeds: 1 - 30.000 mm/mintotal power requirement: 30 kVAweight of the machine ca.: 4,7 tdimensions of the machine ca.: 4,5 x 3,5 x 3,2 mDocuments: Chip conveyor: Coolantsystem: high pressure coolant: 12 bar through spindle ...

B: Vertical-horizontal rotation: 0-90° C: Vertical rotation: 0-360° X axis: 75 m/min Y axis: 60 m/min Contact: Alexander Kosir a.kosir@tbauctions.com +43 6641029345 Auction-ID: A7-44901-1

x-seyahat: 600 mmy-yolculuk: 400 mmz-yolculuk: 400 mmMil Hızı: 4.000 U/dQ.tablo yüzey alanı: 800 x 425 mmAraç konikliği: SK 40 besleme: 2.000 mm/min. toplam güç gereksinimi: 5 kWmakine ağırlığı kar.: 2.000 kgBu reklamın verileri, LogoTech oHG'nin yazılım çözümü olan ModulMWS ile oluşturulmuştur.

IBARMIA double drilling machine model BP-50. Year of manufacture 2005. Serial number 043285. Equipped with two drilling heads for simultaneous operations. Pneumatic workpiece clamping system. Integrated cooling system (coolant). Motor power 4.2 kW. Working speeds 750 / 1500 rpm. Electrical connection 380 V / 50 Hz. Acoustic level 78 dB(A). Machine with CE marking. Ideal configuration for series production and repetitive operations. Robust industrial construction on common base. The dimensions are approximate. Auction-ID: A7-44864-2

With automatic feed length 4500mm Auction-ID: A1-44302-5

Auction-ID: A1-44302-37

With automatic feed length 4500mm Auction-ID: A1-44302-3

Auction-ID: A1-44302-121

GAMOR threading machine model RHG-2B. Year of manufacture 2004. Machine number 655. Threading capacity from M2 to M36. Low-end working speed from 22 to 105 rpm. High-end working speed from 130 to 630 rpm. Maximum working pressure 140 kg/cm². Engine power 3 HP (≈ 2.2 kW). Electrical connection 380 V. Machine with CE marking. Articulated arm configuration for threading operations. Suitable for series production and repetitive work. Approximate dimensions. Auction-ID: A7-44864-4

Tool stations 50 pieces As a spare parts donor Auction-ID: A1-44728-11

NC Rotary Table Division: 360,000 × 0.001° Rotation speed: 20 1/min Pallet changing system Pallet dimensions: 500 × 630 mm Maximum workpiece diameter: 900 mm Maximum workpiece height: 1,000 mm Chain magazine Tool stations: 80 pieces Maximum tool length: 450 mm Maximum tool diameter: 160 mm Coolant pressure 50 bar Auction-ID: A1-44728-13

bağlı yük frekansı: 220 / 380 Vmotor: 1,1 kW çıkış: maksimum yaklaşık –1 Bar vakum pompası Schmalz tip V2 40/70, ahşap işçiliğinde kelepçe, kaldırma ve vakum sistemleri için negatif basınç üretmek için. Pompa, CNC makinelerinde, vakum masalarında ve otomatik taşıma sistemlerinde kullanılmak üzere uygundur. Güvenilir endüstriyel kullanım için sağlam tasarım. Bu reklamın verileri, LogoTech oHG'nin yazılım çözümü olan ModulMWS ile oluşturulmuştur.

as spare parts dispenser, suitable for lot 31 Auction-ID: A1-44728-33

Tool magazine Tool stations 80 pieces Maximum tool weight: 25 kg Maximum tool length: 500 mm Maximum tool diameter: 228 mm NC Rotary Table Division: 360,000 × 0.001° Swivel range: 360° Pallet changing system Pallet dimensions: 630 × 630 mm Coolant Setup Coolant pressure 50 bar Auction-ID: A1-44728-5

Tool System / Tool Magazine Magazine Type: Chain Tool stations 80 pieces With electrical defect Coolant pressure 50 bar Auction-ID: A1-44728-31

6. Pallet system Pallet size: 500 × 630 mm 7.2 Tool magazine Magazine Type: Chain Stack slots: 80 Auction-ID: A1-44728-7

Tool System / Tool Magazine Tool stations 80 pieces Magazine Type: Chain Coolant pressure 50 bar4 additional working pallets 400mmx 500mm Auction-ID: A1-44728-23

Tool System / Tool Magazine Magazine Type: Chain Tool spaces 80 pieces each Built in 1999 / 2001, a working one can be built from both machines Auction-ID: A1-44728-27

NC Rotary Table Speed rotary table (B-axis): 40 1/min Tool magazine Tool stations 80 pieces, 60 of which are still populated Coolant pressure 50 bar including 2 additional work pallets Auction-ID: A1-44728-19

Duration 14394 Hours Workspace Distance pallet surface – spindle center: 75 – 995 mm Distance between pallet centre and spindle head: 150 – 1,140 mm Max. workpiece size: 1,050 × 1,115 mm Pallet table Pallet size: 630 × 630 mm (option 800 × 800 mm) Max. table load: 1,200 kg Spindle Speed range: 45 – 12,000 rpm⁻¹ Max. torque: 451 Nm (up to 550 rpm⁻¹) Tool holder: HSK 100 High-pressure cooling Coolant pressure: 50 bar Tool Changer Tool stations. 60 Pieces Max. tool weight: 20 kg (option 30 kg) Max. tool diameter: 110 mm (at full occupancy) 230 mm (for free neighboring stations) Max. tool length: 600 mm NC table (B-axis) Indexing increment: 0.001° Indexing time 90° (incl. clamps): 2.1 s Indexing time 180° (incl. terminals): 2.5 s Indexing Accuracy: 5\" Repeatability: ± 2\" Rapid traverse B-axis: 27,000°/min B-axis feed: 0 – 27,000°/min Scraper plate must  ...