kaynak makineleri kullanılmış satılık (1,690)

Kaynak: TruPulse 124 Lazer ışığın dalga boyu:1064 nm Maksimum ortalama güç: 140 W Minimum darbe çıkışı: 300 W Maksimum darbe gücü: 6 kW Minimum darbe süresi: 0.3 ms Maksimum darbe süresi: 50 ms Maksimum nabız enerjisi: 30 yıl Maksimum darbe tekrarlama hızı:833 Hz Işin parametre çarpımı: 16 mm-mradX-ekseni:450 mm Hız: 3000 mm/dakika Konumlandırma doğruluğu:± 0,05 mm Tekrarlanabilirlik:± 0.02 mm mm eksen:300 mm Hız: 3000 mm/dakika Konumlandırma doğruluğu:± 0,1 mm Tekrarlanabilirlik:± 0.02 mm Z ekseni: 300 mm Hız: 3000 mm/dakika Konumlandırma doğruluğu:± 0,05 mm Tekrarlanabilirlik:± 0.02 mm Döner eksen Pikap: 120 mm Serbest iç çap: 45 mm Maksimum hız: 80 rpm. Üç çeneli çakmanın çapı:80 mm Merkezi geçitler: 16 mm sıkıştırma menzili, iç kısımlar: 2-71 mm Dı ...

table length: 2400 mmtable width: 1200 mmtable height: 200 mmbore: 22 mmweight: 740 kgEquipment:- 4 feet - basic equipment 650 mm- high-quality steel S355J2+N + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Hole Ø 28 mm- Drill holes surface 100x100 mm grid- Corners, edges and drill holes rounded- Side panel height 200 mm- Hole spacing side panel 50 mm- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise superstructuresThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 0 mmheight: 0 mmtotal power requirement: kWweight of the machine ca.: 0,8 tdimensions of the machine ca.: mUltrasonic Welding Machine for Plastic ArticlesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1000 mmtable width: 1000 mmtable height: 200 mmbore: 28 mmweight: 416 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2486 : prompt, Zwischenverkauf v : 545 €: 1 : 28 mmTools are not included in the price.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

current capacity: - kVAthroat: - mmcontact pressure capacity: - kptotal power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: - mNo. 1244CNC portal spot welding machine PEI PROG-2515Working area: 2500 x 1500Siemens controlWelding capacity of the butt spot welder 3+3 mmWelding capacity of the gun 2+2 mmFeed rates: X+Y 800 mm/sec, Z: 400 mm/sec, A 120°/sec.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 715 mmtable load: 500 kgFrontal Loading Center (A): 150 mmSide Loading Center (B): 150 mmRotating speeds: 0,1 - 1 UpMT-slots: 6 x M16 Tilt Angle: 90-180-110 °Tilting Speed: 30 sn min./90°weight of the machine ca.: 675 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore: 22 mmweight: 92 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 3000 mmtable width: 1500 mmtable height: 150 mmbore: 22 mmweight: 1100 kgEquipment:- 4 feet - basic equipment 650 mm- high-quality steel S355J2+N + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Hole Ø 28 mm- Drill holes surface 100x100 mm grid- Corners, edges and drill holes rounded- Side panel height 200 mm- Hole spacing side panel 50 mm- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise superstructuresThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: Dreh- und kippbar : für Schweißpistole oder : für Plasma condition: nicht geprüft Please note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number: 32 bore: 28 mmweight: 51,2 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mmtable width: 1200 mmtable height: 200 mmbore: 28 mm: 100 x 100 mmmaterial thickness: ca. 24,5 - 27 mm: 200 mmwork height max.: 850 mmWeight: 980 kg Special item - The drill pattern on all side rails is offset downwards by approx. 1 mm. The clamping dimension for angle or table-to-table connection is not specified. >.- high-quality steel S355J2+N + plasma nitriding- Drill holes in side panel in diagonal grid- Corners, edges and drill holes bevelled 45- Construction reinforced by ribs- incl. base basic equipment 650 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 1860 m³/h: Pressung 2.900 Pa: 1,1 kWfilter surface area: 10 m²: 72 dB(A): 400/50 V/Hz: 665 x 1100 x 1495 mm: 200 kg- Hose arm 3 m, joints inside- Filter cartridge: dust class M- Pre-filter: baffle plate- Current type: 3Ph+N+PEThe filter system---------------------------------------The mobile filter system of the Cartmaster IFA type is thanks to the automaticCleaning particularly suitable for welding work with unalloyed andalloyed steels, galvanized material and aluminum with heavy smoke development.It corresponds to the safety requirements for devicesWelding fume class W3 (high-alloy steels with alloy components > 30%Nickel-based alloy).If used as intended, the system can be used for theRecirculation mode used because the requirements for theExceptions according to TRGS 560 are fulfilled. That specialdeveloped, dirt-dependent cleaning system ensures a goodcleaning behavior of the fil ...

: 2009 current intensivity: 300 Awire dia.: 1 mm: sofort einsatzbereit : 239836 Please note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max. in kg: max. 1000 kgturning speeds: 0,18 - 0,58 U/minheight: 976 - 1436 mminclination: 0 - 115 °table diameter: 895 mmvoltage: 380 Vtotal power requirement: 2,0 kWweight: 685 kgrange L-W-H: 2414 x 920 x 1436 mm Exhibition machine from 2024 with only approx. 2x operating hours Condition NEW Special price on requestThe AK BEND SRH hydraulic welding positioner is idealfor welding, assembly and maintenance work. Positioning is done via ahydraulic rotation and tilting function.Description:- electro-hydraulic turning and tilting function- Fast handling of workpieces- Maximum productivity thanks to optimal working position- Lifting, tilting and turning workpieces in one clamping- Low idle times thanks to turning components- Maximum work performance thanks to comfortable working- Back-friendly working for the userEquipment:- Continuously variable speed adjustment- Freely movable foot ...

: neu : ca. 2 - 4 Wochen ab Auftr : 449 €: 16 mmTool trolley for accessories 16mm system, mobileTools are not included in the price.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 2 - 4 Wochen ab Auftr : 1725 €: 1485 €: 16 mmThe extended entry level with added value in the set configuration for the most common work steps and applications.Consisting of:8 screw clamps 180° HIS16Z30002 screw clamps 45° HIS16Z30452 V-support HIS16VP1004 stop brackets 90x37, 5mm HIS16WA90376 pieces stop bracket 90x90mm HIS16WA90902 pieces stop bracket 300mm HIS16WA3002 pieces stop bar 75mm HIS16FA0758 pieces stop bar 115mm HIS16FA11520 pieces quick clamping bolt short HIS16SB1001 piece cleaning brush HIS16RB1 piece torch holder HIS16BH1 piece cleaner HIS-Cleaner-1L1 piece anti-adhesive agent HIS-Premium-1LOPTION:Tool trolley HIS16WW1000 € 449,--The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 2 - 4 Wochen ab Auftr : 929 €: 16 mmStarter set for anyone who wants to work professionally and efficiently contains the most important tools as basic equipment.Consisting of:4 pieces screw clamp 180° HIS16Z30004 pieces stop bracket 90x37.5mm HIS16WA90374 pieces stop bracket 90x90mm HIS16WA90904 pieces stop bar 115mm HIS16FA11512 pieces quick clamping bolt short HIS16SB1001 piece cleaning brush HIS16RB1 piece torch holder HIS16BH1 piece cleaner HIS-Cleaner-1L1 piece anti-adhesive agent HIS-Premium-1LOPTION:Tool trolley HIS16WW1000 € 449,--The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 2 - 4 Wochen ab Auftr : 995 €: 1200 x 800 mm: 150 kg: 16 mmTHIS MODEL IS DESIGNED FOR BEGINNERS AND FOR PROCESSING LIGHTER AND SMALLER WORKPIECES.Our tables are characterised by the high degree of hardness with our Cr75M+ hard chrome plating, the very high degree of accuracy of +/- 0.05 mm on the entire table surface and the tolerances of the hole diameters of the entire hole pattern.2D standard welding and clamping table,1200 x 1200 with Cr75M+ hard chrome platingTable system: 16 mmMaterial thickness: 12 mmIncluding table substructure and standard table legs S355J2+N with Cr75M+ hard chrome plating Hole: 16 mm, material thickness: 12 mm Including coated table substructure Table top with 2-sided fine scaling and 50 x 50 mm grid line Rounded edges and holes Solid standard table legs with load capacity 1 tonne per leg, 500 kg per leg for castor modelThe data for this ad ...

table load: max. 40 t twith manual operation panel: ja weight of the machine ca.: 22 t: 1918 Year: ca. 1990 Control: Dimensions (L/W/H): 3500 x 2300 x 2400 mmPlease note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: JÄCKEL MIG 405 output: 400 AP: water cooling unit: Please note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1500 mmtable width: 1500 mmtable height: 150 mmbore: 22 mmweight: 543 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 3000 mmtable width: 1500 mmtable height: 200 mmbore: 28 mmweight: 1425 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 2 - 4 Wochen ab Auftr : 3695 €: 2400 x 1200 mm: 3000 kg: 482 kg: 200 mm: 16 mmTHIS MODEL FORMS THE BASIS OF THE ENTIRE SYSTEM. IT CAN BE EXTENDED ON ALL FIVE SIDES AS REQUIRED.Our tables are characterised by the high degree of hardness with our Cr75M+ hard chrome plating, the very high degree of accuracy of +/- 0.05 mm on the entire table surface and the tolerances of the hole diameters of the entire hole pattern.3D standard welding and clamping table,2400 x 1200 x 100 mm with Cr75M+ hard chrome platingTable system: 16 mmMaterial thickness: 12 mmIncluding table substructure and standard table legs S355J2+N with Cr75M+ hard chrome plating Hole: 16 mm, material thickness: 12 mm Including coated table substructure Side panel 100 mm with 2-row hole pattern and 25 mm hole spacing Table top with 2-sided fine scaling and 50 x 50 mm grid line Rounded edges and holes Solid st ...

: neu : ca. 2 - 4 Wochen ab Auftr : 4862 €: 3000 x 1500 mm: 3000 kg: 755 kg: 100 mm: 12 mm: 16 mmTHIS MODEL FORMS THE BASIS OF THE ENTIRE SYSTEM. IT CAN BE EXTENDED ON ALL FIVE SIDES AS REQUIRED.Our tables are characterised by the high degree of hardness with our Cr75M+ hard chrome plating, the very high degree of accuracy of +/- 0.05 mm on the entire table surface and the tolerances of the hole diameters of the entire hole pattern.3D standard welding and clamping table,3000 x 1500 x 200 mm with Cr75M+ hard chrome platingTable system: 16 mmMaterial thickness: 12 mmIncluding table substructure and standard table legs S355J2+N with Cr75M+ hard chrome plating Hole: 16 mm, material thickness: 12 mm Including coated table substructure Side panel 200 mm with 2-row hole pattern and 25 mm hole spacing Table top with 2-sided fine scaling and 50 x 50 mm grid line Rounded edges and holes S ...

: 6 Meterweight of the machine ca.: 1 tPlease note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: GoodAire 1800 output: 1.800 cbm/Stundeweight of the machine ca.: 200 kgPlease note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2400 mmtable width: 1200 mmtable height: 200 mmbore: 28 mm: 100 x 100 mmmaterial thickness: ca. 24,5 - 27 mm: 200 mmwork height max.: 850 mmWeight: 980 kg Special item - The drill pattern on all side rails is offset downwards by approx. 1 mm. The clamping dimension for angle or table-to-table connection is not specified. >.- high-quality steel S355J2+N + plasma nitriding- Drill holes in side panel in diagonal grid- Corners, edges and drill holes bevelled 45- Construction reinforced by ribs- incl. base basic equipment 650 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2025 : 020157 : prompt, Zwischenverkauf v : Türkei : 6320 €: 121.98 €: 1 : 250 kg: 150 mm: 150 mm: 360 °: 360 kgm: 230 / 50 V / Hz: 0.37 kW: 0.25 kW: 0.1 - 3 U/min: 30 s: 600 mm: M16x6 mm: 550 mmThe positioners are available in standard sizes for load capacities from 150 kg to 3,000 kg.The frame is optimally designed for rotation and tilting operations.The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected.For heavy workpieces, the positioners are mounted on the floor.The tables have radial T-slots that enable quick clamping of the workpieces.Tilting and rotation are controlled by steel gears.For safety, the positioner is equipped with a reduction gear that holds the table in the desired position.Foot pedalCable for signal to welderTouchpanel for following functions:- rotation speed- operat ...

table length: 1200 mmtable width: 1200 mmtable height: 150 mmbore: 22 mmweight: 395 kgEquipment:- 4 feet - basic equipment 650 mm- high-quality steel S355J2+N + plasma nitriding- Material thickness approx. 24.5 - 27 mm- Hole Ø 28 mm- Drill holes surface 100x100 mm grid- Corners, edges and drill holes rounded- Side panel height 200 mm- Hole spacing side panel 50 mm- Including scaling on the surface- Construction reinforced by ribs- Grid lines enable precise superstructuresThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.