180 WEINIG satılık ikinci el makine

Manufacturer: Weinig , Type: Unimat 3000 Brilliant, Year: 2002, Control: Weinig LogoCom, Planing widht mm: 20-230, Planing hight mm: 10-160, Number of spindles: 9, Elektronische Achsverstellung: yes, Wellendrehzahl: 4000-12000 regelbar, Fast exchange device: HSK 63, Setting up program shafts: yes, Saw unit kW: no, Table rollers: yes, Tool exchange places: no, Elektronische Anzeige : yes, Rotations of spindles max. rpm: 12000, Spindle arrangement: unten/rechts/links/rechts/oben/unten/oben/unten, Separate engine per spindle: yes, Fully suspended drive feeding: yes, Feeding - kW: 7,5, Feeding speed min-max m/min: 10-36, Feeding speed continous adjustable: yes, Table length: kurz, Pneumatical top pressure: yes, Adjustment - electonically: yes, Jointer Stück: yes, 1.Bottom spindle kW: 7,5 KW/12000 U/min, 2nd spindle on right kW: 7,5/12000 U/min, 3.Left spindle kW: 11/ 4000-12000min, 4th spin ...

Manufacturer: Weinig, Type: Unicotrol 10-5, Year: 1992, Control: Siemens/weinig, Min.-max. workpiece height in mm: max.100 mm, Controlled lenght stopper: yes, Trimming saw: yes, 4-fach Konterholz: yes, Studioeinrichtung Winkel: yes, Automatisierungspaket: yes, Doppelteilpaket: yes, Unitecspindel: yes, Beschlagfräseinheit: yes, Nutspindel: yes, Crosscut saw controlled: yes, Diameter of the spindle mm: 50, Werkzeugdurchmesser max.: mm: 400, Tool travel range tenoning spindle: 6 X 85/7 Werkzeuge, Länge Profilspindel mm: 3, 1 spindle lift in mm: 2 X 95/3 Werkzeuge, 1Engine power kW: 2 x 95, 2 length of profile spindle in mm: 11, 2 spindle lift in mm: 3 X 75/4 Werkzeuge, 2 Engine power kW: 3 X 75, 3 Länge Profilspindel mm: 11, Diameter of the spindle mm: 3 kw, Diameter of the spindle mm: 50, Feed stepless: 6-12, Total power kW: yes, Required space L x W x H mm: 10, Year :1992

Number of boring spindles: 4 St. Working width: 230 mm Working height: 160 mm Feed motor: 11 kW Feed speed: 60 m/min. Control: Memory Plus The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

boyutlar: Auf Anfrage Ağırlık: Auf Anfrage Mevcut: Auf Anfrage Weinig Univar (ve diğerleri) için çeşitli kullanılmış yedek parçalar veya tam üniteler, kontrol sistemleri ve kontrol kabinleri her zaman mevcuttur. Lütfen bizimle iletişime geçin. Örnek fotoğraflar. Bu reklamın verileri, LogoTech oHG'nin yazılım çözümü olan ModulMWS ile oluşturulmuştur.

Number of boring spindles: 7 St. Working width: 260 mm Working height: 160 mm Length of the planing table: 2.500 mm Feed motor: 4 kW Feed speed: 30 m/min. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Uzunluk: yaklaşık 4.000 mmÇalışma yüksekliği: yaklaşık 900 mmAğırlık: yaklaşık 2.500 kgWeinig Univar için tüm pencere panzetlerini, panellerini veya benzeri büyük iş parçalarını taşımak için uygun dönüş taşıma/mekanizasyonReklamın verileri, LogoTech oHG'nin yazılım çözümü ModulMWS ile oluşturulmuştur.

Tenoning spindle: 2 St. Number of milling agregates: 7 St. Spindle diameter: 50 mm control: CNC, Weinig PC-Nexus Weinig Uncontrol 12 with radial and axial CNC spindles and VARIO table .. The machine has already been professionally dismantled and stored in 73447 Oberkochen Specifications summary (please inquire about any additional accessories included) .. crosscut saw .. > Crosscut saw electronically, horizontally infinitely adjustable > Number of tools: 1 pc. > Spindle speed: 3000-6000 rpm > Spindle diameter: 40 mm > Tool diameter max.: 400 mm > Motor power: 3.7 kW > Laser guide light for detecting the sawing section > Axial adjustment path 150 mm NC axis, electronically stepless > Adjustment path, radial, pneumatic, 8 positions, e.g. for edge rounding from above rounding aggregate .. > Position: horizontally below > Axial adjustment path together with the crosscut saw. electronic len ...

Manufacturer: Weinig Unicontrol 6, Type: Typ 6, Year: 1985, Control: SPS, Work piece width min-max mm: 25 - 260 mm, Min.-max. workpiece length in mm: 220 + 2xZapfen. max. 6000 mm, Min.-max. workpiece height in mm: 30 - 100 mm, Controlled lenght stopper: no, Studioeinrichtung Winkel: yes, Crosscut saw controlled: yes, Diameter of the spindle mm: 50 mm, Moulding spindles: 3, Länge Profilspindel mm: 300 mm, 1 spindle lift in mm: 100 mm, 1Engine power kW: 11 kW, 2 spindle lift in mm: 100 mm, 2 Engine power kW: 11 kW, 3 spindle lift in mm: 100 mm, 3 Engine power kW: 11 kW, Diameter of the spindle mm: 50 mm, Feeding speed max m/min: 5,8 - 80 m/min., Feed stepless: yes, Outer profiling package: yes, Splintering controlled: no, Horizontal spindle clocked: yes, Online connection: no, Work piece re-charging: no, Exhaust diameter mm: 180 mm, Required space L x W x H mm: 6000x3000x2300 mm, Maschine ...

Number of spindles: 3 St. Number of tools: 8 St. Spindle diameter: 50 mm Dimensions (L/W/H): 4250x1850x2300 mm ! MACHINE FUNCTIONALLY CHECKED AND READY FOR DEMONSTRATION ! ! Technical description in RUSSIAN, more machine pictures as well as machinevideos - if available - at the end of this description as attached files ! # 6988 Weinig Univar 6 CNC .. Technical details summary (please ask for possibly more included equpment) .. 1st profiling spindle: .. > spindle rotation direction: clockwise and reverse for rip-off free outside profiling of sashes > position: vertical right > number of tools: 1 pcs. > length of spindle: 120 mm > number of revolutions: 6000 rpm > spindle diameter: 50 mm > tool diameter max.: 232 mm > engine: 11 kW 2nd profiling spindle: .. > position: vertical right > number of tools: variabel, CNC > length of spindle: 320 mm > spindle stroke vertical: variabel,  ...

Tenoning spindle: 1 St. Number of milling agregates: 4 St. Spindle diameter: 50 mm 1 used Weinig Unicontrol 6 window system ---------------------------------------------- Manufacturers description: For the production of individual parts, elements, and small series. Spindle arrangement: One cross-cutting saw, one single-sided tenoning and slotting spindle, one right-hand profiling spindle, one tenoning and slotting spindle, and profiling spindle suitable for holding multiple tools stacked on top of each other, with pneumatic spindle movement. Slotting table with motorized table movement and automatic transfer to the continuous, chainless rubber roller feed of the profiling unit. Feed height adjustment manually. Workpiece clamping via 2 pneumatic clamping cylinders. Length stop with scale and magnifying glass for frame or sash external dimensions. Tool positions (longitudinal and transvers ...

Number of spindles: 5 St. Working width: 230 mm Working height: 120 mm Length of the planing table: 2500 mm Feed motor: 4 kW Feed speed: 5-30 m/min. Control: Memory-Funktion Weinig Powermat 600 Compact ---------------------------------------------------------------------- The machine has been cleaned and fully inspected. Brief Summary: ---------------------------------- - 5 Spindles - Powerful Motors - Left and top spindles controlled for width and height Detailed Description: ---------------------------------------------------------------------- - Technical Data: Working Width: 20-230 mm Working Height: 10-120 mm Number of Spindles: 5 1st Spindle - Bottom ----------------------------------------------- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool Circle: 125-145 mm Tool Circle for Rebating Cutter: 130-160 mm Axially Travel: 5 mm Rebating Device MarathonCoatine  ...

Tenoning spindle: 2 St. Number of milling agregates: 7 St. Spindle diameter: 50 mm control: Weinig, PC-Nexus Weinig Unicontrol 12 with radial and axial CNC spindles as well as VARIO table and milling carriage Machine dismantled professionally and in our warehouse in 73447 Oberkochen. Video and pictures were taken before dismantling. Technical data summary (please inquire about any additional accessories included) crosscut saw > Electronic crosscut saw, horizontally infinitely adjustable > Number of tools: 1 piece. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Tool diameter max.: 400 mm > Motor power: 3.7 kW > Laser directional light to detect the saw section > Axial adjustment path 150 mm NC axis, electronically infinitely variable > Radial pneumatic adjustment path 8 positions for e.g. edge rounding from above Rounding aggregate > Position: horizontally below > Motor power ...

Number of spindles: 6 St. Working width: 230 mm Working height: 120 mm Length of the planing table: 2000 mm Feed motor: 4 kW Feed speed: 5-24 m/min. 1 WEINIG Unimat 23 E Planer and moulder ------------------------------------------ 6 spindles (with 2 rigth spindles, reinforced motors, 8,000 rpm, ATS control Machine will be cleaned and functionally checked before delivery Working width 20 - 230 mm Working height 8 - 120 mm 1st spindle (bottom) 5.5 kW (motor replaced) ------------------------- Diameter 40 mm Speed 6,000 rpm Tool swing diameter 125 - 180 mm Rebating unit including tool Hardened table insert in front of 1st (bottom) spindle 2nd spindle (right) 12.1 kW (motor replaced) ------------------------- Shared motor with left vertical spindle Diameter 40 mm Speed 8,000 rpm Tool swing diameter 112-250 mm Max. Tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axially travel ...

diameter - cutter special: 30 mm draw-in arbor diameter: 40 mm clamping height: 310 mm circle diameter: 80-300 mm weight: 30 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tenoning spindle: 1 St. Number of milling agregates: 4 St. Spindle diameter: 50 mm # 6971 Weinig Unicontrol 6 -------------------------------------------- Technical Specifications Summary (Please inquire about any additional accessories included) Item 1: Crosscut Saw ------------------------------------------- > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Maximum tool diameter: 400 mm > Motor power: 3.7 kW > Laser alignment light for detecting the saw cut CNC-controlled length stop -------------------------------------------- > Length 3,500 mm > Electronic length stop including positioned crosscut saw Item 2: Tenon and slotting spindle --------------------------------------------- > Number of tools: 3 (stroke 2 x 100) mm) or 4 (stroke 3 x 80 mm) > Tool clamping length: 320 mm > Vertical pneumatic spindle stroke: 240 mm for wood thicknesses 68 - 92 mm > S ...

Number of spindles: 6 St. Working width: 230 mm Working height: 120 mm Length of the planing table: 2500 mm Feed motor: 3 kW Feed speed: 5-24 m/min. total power requirement: 27 kw Dimensions (L/W/H): 3900 x 2200 x 2000 mm weight of the machine ca.: 2500 kg Weinig Profimat 23 four-side planer, window version with glazing bead removal or can be used as a grooving spindle ATS control and program control ------------------------------------ Machine was factory overhauled by Weinig in 2024. Technical Specifications Summary (Please inquire about any additional accessories included) -------------------------------------------------------- General ------------------------------------ > Working width: 230 mm > Working height: 120 mm > Number of spindles: 6 > Planer table length: 2500 mm > Feed motor: 3 kW > Feed speed: 5-24 m/min > Total power requirement: 27 kW > Dimensions: 3900 x 2200 x 2000 m ...

Working width: 230 mm Working height: 15-120 mm Number of spindles: 2 St. Weinig Hydro Planer Type Uniplan 23 -------------------------------------------------------------------- Machine was factory overhauled by Weinig in 2024. Description: For two-sided horizontal woodworking with two working spindles. Spindle arrangement: horizontal, bottom and top. The two horizontal spindles are equipped with hydraulically tensioned counterbearings without axial adjustment. Built-in straight jointers on both spindles with automatic stone feed, remotely controlled with the hood closed. Machine with continuous, chainless feed, equipped with rubber rollers. Electric up/down adjustment of the spindles according to a mechanical digital display (SIKO). On/off switch for limiting the up/down adjustment. Feed roller pressure pneumatic. Stops and table tops are not adjustable. Machine with steel table tops.  ...

working length: 3600 mm Working width: 1500 mm Working height: ca. 900 mm WEINIG Return Conveyor System RF15 ----------------------------------- Can be used after moulders, planers, and milling machines with a maximum feed speed of approx. 22 m/min. Technical Description: Workpiece length: 250 - 3,600 mm Workpiece width: 30-230 mm Longitudinal-transverse conveyor with two integrated, driven roller conveyors: Transverse conveyor path 1,500 mm Constant conveyor speed: 30 m/min Roller conveyor length 2,200 mm Return roller conveyor (non-driven) to the operator (Technical specifications according to the manufacturer - without guarantee!) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of spindles: 8 St. Working width: 230 mm Working height: 120 mm Weinig Planing and moulding line ------------------------------- Consisting of the following individual machines: Item 1: Weinig Profimat 23 E, four-side planer, stock number: 2803 5 spindles + glazing bead saw Item 2: Weinig Uniplan 23, stock number: 2804 Fine and hydroplaner with 2 horizontal spindles Item 3: Weinig RF 15, stock number: 2805 Longitudinal-cross-longitudinal conveyor with workpiece return to the operator Detailed descriptions of the machines can be found under the mentioned stock numbers. (Technical specifications according to the manufacturer, without guarantee!) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tenoning spindle: 1 St Number of milling agregates: 4 St. Spindle diameter: 50 mm Control: Weinig, PC-Nexus Weinig Unicontrol 10 CNC - Spindles radially and axially CNC-controlled -------------------------------------------------------------- The machine was factory overhauled by Weinig in 2024. The control system was also upgraded to a Siemens S 7 677 C, with a new membrane panel Touch. With the following machining units: Crosscut saw -------------------------------------------------------------- with laser alignment light, motor power 3 kW, spindle diameter 40 mm, spindle speed 3,000 Axially adjustable via NC axis Radial pneumatic adjustment to 8 positions for edge rounding from above Unit from below for edge rounding ------------------------------------------------------------- Axially adjustable with crosscut saw Tenon and slotting spindle -------------------------------------------- ...

Aşağıdakilerden oluşan bir Weinig planya hattını satışa sunuyoruz: - İstifleme sistemi (x2) (180 derece de döndürülebilir) - Çıta imhası -Yalıtım - Weinig Hydromat 22 – 7 iğ, 80 m/dk'ya kadar besleme hızı (yeni kontrol) - Sıralama istasyonu -Kapatma - Paketleme Özellikler: - Toplam hat uzunluğu: 35 metre - Toplam hat genişliği: 15 metre Daha fazlasını burada bulabilirsiniz - / Bize ulaşın -

Üretici: Weinig Ferigungsanlage, Kontrol: Weinig, Yazılım: Klaes Sofware, Maschinensteuerung: Übergeordnet, Programlama istasyonu ofisi: evet, Üretici1: Weiniig Profimat, Makine tipi1: Profimat 23, Üretim yılı1: 1999, FREETEXT1: 5 Spindeln, Üretici2: Weinig, Makine tipi2: Unicontrol 10-5, Üretim yılı2: 1999, Üretici3: Weinig Transportsytem, Üretici4: Weinig, Makine tipi4: Unitec 10, Üretim yılı4: 1999, Üretici5: Stähle Schleifmaschine,

Üretici: Weinig, Tip: Unimat 17, Planyalama genişliği mm: 180, Planyalama yüksekliği mm: 120, Mil sayısı: 7, Elektronische Achsverstellung: hayır, İş parçası genişliği minimum-maksimum mm: 180, minimum-max. İş parçası uzunluğu mm cinsinden: 350, Wellendrehzahl: 6000, Mil sayısı: 6, Mil çapı mm cinsinden: yaklaşık 40, Mil düzeni: U / R / L / R / O / U / Uni, 1. Alt mil kW: 4, 2. mil sağ milde kW: 4, 3. Sol mil kW: 4, 4. mil sağ milde kW: 4, 5.Top mil kW: 4, altta 6. mil kW: 4, solda 7. evrensel kW: 4,

Üretici: Weinig, Tip: Unimat 17 A, Yıl: 1979, Kontrol: el, Planyalama genişliği: 10-170, Planlama yüksekliği mm: 10-120, Minimum-max. iş parçası uzunluğu mm cinsinden: 300, Mil sayısı: 6, Mil çapı mm: 30, Hızlı değişim cihazı: hayır, Mil dönüş sayısı maksimum. rpm: 6000, Mil başına ayrı motor: evet, Tam askı sürücü beslemesi: hayır, Yıl :1979

Üretici: Weinig, Tip: Conturex 1, Yıl: 2004, Kontrol: 840 D, Program: Alphacam, Çalışma aralığı X: 1.500, Çalışma aralığı Y ekseni: 250, Çalışma aralığı Z: 125, C ekseni: evet, Frezeleme milleri sayısı: 2, Frezeleme motoru 1 saat güç: 10,5, pm: 18.000, Frezeleme motoru 2 saat güç: 10,5, pm: 18.000, Takım dergisi başına alet sayısı: 36, Yıl: 2004

Üretici: Weinig, Tip: Unimat 17, Planlama genişliği mm: 170, Planlama yüksekliği mm: 120, Mil çapı mm cinsinden: 35, Mil duruşları maksimum: 6.000, Mil düzeni: U / R / L / R / O / U, Besleme - kW: 4, 1. Alt mil kW: 4, 3. Sol mil kW: 3, 4. Sağ mil 4. mil kW: 3, 5.Top mil kW: 4, altıncı mil altta kW: 4,

Üretici: Weinig, Tip: Kettenförderssysteme Vereinzelung, Çalışma uzunluğu mm: 6500 mm, Çalışma genişliği mm: 2600 mm, Kendi kontrolcüsü: hayır, Motor gücü kW: yaklaşık 5, Çalışma yüksekliği ayarlanabilir mm: 900 mm, SERBEST METİN: 5 Mitnehmer Ketten mit 170 mm Abstand,