yapıştırıcı makineleri kullanılmış satılık (605)

Kenar kalınlığı 0,4 - 3 mm İş parçası kalınlığı: maksimum 50 mm En az iş parçası uzunluğu 150 mm Besleme hızı 22 m/dakika

Barberan Laminasyon hattı aşağıdaki makineleri içerir: 1- EN-PUR-4-1600 2-IT-4000/16 3-CAL-H-2-1600

İle tamamlanan; basmalı düğmeli manyetik marş motoru ve güvenlik korumaları 220 Gerilim

Used single-sided edge banding machine Brand: Homag Type: Profi KAL 330/ 9/A6/L Year of manufacture: 2011 Feed speed Infinitely adjustable 18-25 m/min Release agent spray unit top/bottom - To reduce surface contamination. Jointing unit KAL300/S2 - 2 motors, each 3 kW, Hz 9000 1/min - Motor shaft Ø 30x68 mm, KN - Electropneumatic control of both motors for joint milling. - Automatic adjustment of the joint milling cutter to the center of the workpiece. Melting unit with granulate container - Granulate container 12L - Level control of the melting quantity Lasertec activation unit standard - The gluing unit is designed so that it can be used with either EVA/PU adhesive or LaserTec. - Manual conversion from LaserTec to PU/EVA Magazine 1 roll - For solid edges, strip goods, and roll goods - Automatic strip separation via vacuum suction cup - 1 edge f ...

single-sided direct postforming machine Brand: Wehrmann Type: Combima /K/I/R80/1260/V Example offer direct postforming machine Varied using for doors, worktops, furniture parts, curved caravan fronts, etc. Technical data: A single-sided throughfeed postforming machine for the postforming and postfolding process, for processing curved workpieces in caravan construction. For workpieces to be profiled made of wood/wood materials with laminate (CPL,HPL) as surface material. The laminate protruding for the postforming process is located in the machine on the underside of the workpiece and is formed from the bottom to the top. Technical data Machine Constant workpiece projection from the chain conveyor: from approx. 35 mm Throughput width min.: 130 mm ( only for straight parts ) Workpiece length in feed direction min.: 1,000 mm Basic height: 940 mm (upper edge  ...

Contour edge banding & trimming machine Make: VITAP Type: SMART-3 New machine - With swivable trimming station - For straight and formed workpieces (convex and concave) - 1 glue spreading roller for 10-60 mm panel thickness - Guillotine to cut bands up to 3 mm thickness - edge 0,5-3mm 2 tape feeding speed (3 m/min or 7 m/min) -Glue pot 1kg capacity - Tape plate Ø=520mm Solid Phenolic table - Easy to clean - With no heat transmission - Electronic temperature control - Foot pedal command for the guillotine Tilting trimming unit - with 1 high frequency motor HP 0.75 (kw0,55) - 1 cutter Head with 2 knives r1mm/r2mm/r3mm - Support tape plate Ø 600 mm - Semi-automatic end-cutter with motor 0,5 kw and blade Ø=125 mm - Working table 400 x 300 mm. - CE standards. Optional available for an extra charge: - Cutter (without knives) - Set ...

PUR gluing Brand: GP Service Type: EASY PUR general description - PUR adhesive unit with integrated pre-melt container for a permanent zero joint - greatly reduced maintenance and cleaning costs due to PTFE coating of all assemblies (except glue roller) - suitable for flexible production capacities - order in synchronism adaptable to all common machine manufacturers: - Can be mounted directly on HOMAG machines - also in alternation with original glueing unit! - Stefani with adapter - Biesse with tag - others on request Application height 60 mm, higher on request Feed up to 30 m / min, higher on request low order quantities (

Hot glue tub for edges application on both linear and shaped panels - Main motor 3.95 kW - Accidental burn protection - Height adjustable edge guide - Rubber pre-tape roller - Double flat scrapers on both sides of the panel - Edge header - Edge thickness 0.8 - 2 mm - Min/Max panel thickness 12/43 mm - Working speed: 7 m/min Machine condition: unchecked. Approx. Transport dimension: LxWxH 2000 x 670 x 1260 mm; Approx. Weight: 470kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-42410-393

HOLZER EDGECONTROL control - Incl. edge rack - Warning: the information reported has been taken on board the machine using measuring instruments and may not correspond to the actual performance. For further information, on-site inspection is suggested. The item is sold in the state in which it is, unverified and without warranty of operation. Item not subject to sales restrictions. Auction-ID: A7-41268-810

: 0.4-5 mmÇalışma parçası kalınlığı: 10-50 mmToplam uzunluk: 2730 mmBesleme hızı: m/min.Toplam güç gereksinimi: kwAğırlık: 720 kgBu reklamın verileri, LogoTech oHG'nin yazılım çözümü olan ModulMWS ile oluşturulmuştur.

\"Joining / Gluing / Capping / (Combi) Milling / Surface Scraper Max. edge banding thickness: 6 mm - Feed speed: 10 m/min - Workpiece width min: 75 mm - Thickness of roll material max: 3 mm - Workpiece thickness: 8 - 60 mm - Edge material thickness: 0.4-6 mm incl. pneum. Automation package length B 90 3 pneumatic positions (0.4 +1.0 +2.0) for pressure zone / milling unit incl. pneumatic change straight # radius milling unit over Touch screen Pipe system mounted D=200mm left (MA outlet) with manual gate valve and 90 degree pipe bend PRICING IN FUNCTION-TESTED CONDITION SALE WITHOUT WARRANTY! Data are taken from the manufacturer's brochure/documents and may differ from the actual values. ATTENTION: it is expressly pointed out that this lot only corresponds to the scope of the ticket description. If objects can be seen in the photo that are not expressly listed in the lot descripti ...

\"Equipment & Aggregates Gluing/ Capping/ Milling Feed speed: 8–16 m/min Workpiece width min.: 60 mm Workpiece thickness: 6–60 mm Banding thickness max.: 20 mm Banding height max.: 60 mm Thickness of roll material max.: 3 mm Edge material thickness: 0.4–20 mm Condition & Notes Sold as seen as \"scrap\" – defective spare parts carrier, Pneumatic lines defective – function test not possible Aggregates run in basic functions (turning engines) Important note: This machine does not have CE mark and complies with not the current EU safety guidelines. Use only in compliance with national regulations and safety measures. Sale without warranty and guarantee ATTENTION: Photos may show objects that are not part of the sale (tools, accessories, software, equipment, etc.) Machine is suitable as a spare parts spotter Suitable for repair only by qualified personnel Data are taken from t ...

\"Gluing / Capping / Milling / Radius Scraper / Cleaning Station Max. edge banding thickness: 5 mm Max. edge bucket height: 60 mm PU processing possible – NO - Feed speed: 11 m/min - Edge material thickness: 0.4-5 mm PRICING IN FUNCTION-TESTED CONDITION SALE WITHOUT WARRANTY! Data are taken from the manufacturer's brochure/documents and may differ from the actual values. ATTENTION: it is expressly pointed out that this lot only corresponds to the scope of the ticket description. If objects can be seen in the photo that are not expressly listed in the lot description, they are not part of the sale. Of course, this also applies to tools, additional equipment, accessories, software, Equipment, etc. (in terms of photo and lot description). PRICING IN FUNCTION-TESTED CONDITION SALE WITHOUT WARRANTY! Data are taken from the manufacturer's brochure/documents and may differ from the ...

\"Melamine/PVC/ABS/PP/veneer: 0.4 ÷ 3.0 mm Wooden strips: up to 6 mm Workpiece thickness: 8 ÷ 60 mm Workpiece length: min. approx. 120 mm (min. approx. 200 mm with corner copying) Workpiece width: min. approx. 75 mm Equipment: Radius scraper unit with blow-off device Plane Scraper Unit Buffing unit EVA/PUR glue basin with spout function - \"workshop overhauled\" Diamond Tools Height=65mm for Joining Unit Automatic positioning of the units - 2 predefined edge thicknesses 0.4+2.0mm Riepe Spraying Device - Non-stick on the joining unit Riepe Spraying Device - Cleaning Spray in Front of Buffing Unit Pneumatic adjustment on/off for radius scraper blade Pneumatic adjustment on/off for surface scraper blade Dimensions: approx. 4200 x 880 x 1640 mm Net weight: approx. 1150 kg PRICING IN FUNCTION-TESTED CONDITION - WITHOUT WARRANTY! Data are taken from the manufacturer's brochure/documents a ...

Equipped with folding table; including accessories and 3 plastic machine cases Auction-ID: A1-40780-21

Equipped with plc control, transit conveyor with large batch stock in 3x storage cabinet, extraction to valve Auction-ID: A1-40780-3

Auction-ID: A1-40780-178

Auction-ID: A7-39846-1

Auction-ID: A1-40971-20

Auction-ID: A1-40971-33

Gluing unit Pressure rollers Hood unit Coarse milling unit 4.5kW Auction-ID: A1-40971-60

Auction-ID: A1-40971-14

Pre-milling unit Gluing unit Hood unit Coarse milling unit Radius scraper unit Scraper unit Max edge tape thickness: 6mm Max panel thickness: 60mm Min panel length: 140mm Max throughput speed: 11m/min Auction-ID: A1-40971-21

Including return Please note: The fence in the photo is not included. Auction-ID: A1-40971-3

Max. edge thickness 3/8 mm min/max. workpiece thickness 10/60 mm Min. workpiece length approx. 220 mm Min. workpiece width approx. 80 mm Feed rate about 10 m/Min. maximum power consumption 12.4 kW electrical connection 400 V / 50-60 Hz Pre-milling Gluing unit Pressure roller Hacksaw Milling unit Milling unit Corner rounder Radius scraper Flat scraper Cleaning unit Auction-ID: A1-40971-15

9 units Gluing unit Pressure rollers Hood unit Coarse milling unit Coarse milling unit Radius scraper unit Corner rounding unit Scraper unit Brush unit Auction-ID: A1-40971-68

Model: Optimat ZHR05/L/085 Features: With operator feedback system Inlet calibration unit Glue Tank Front and rear cutting unit Upper and lower machining Automatic corner rounding unit Pressure Roller Polishing brush Conditions of transport: Full truck required Overall dimensions: 10,000 x 2,000 x 2,500 mm Weight: 7,500 kg Restriction on sale: The machine can only be sold within European countries Auction-ID: A1-41441-406

Auction-ID: A1-41441-10

Hood Composition 2 calibrated routers with input Glue Tray 3 mm pvc reinforced cutter Upside down Brush Scraper Auction-ID: A1-41441-7

Hot glue tub for edges application on both linear and shaped panels - Main motor 3.95 kW - Accidental burn protection - Height adjustable edge guide - Rubber pre-tape roller - Double flat scrapers on both sides of the panel - Edge header - Edge thickness 0.8 - 2 mm - Min/Max panel thickness 12/43 mm - Working speed: 7 m/min Machine condition: unchecked. Approx. Transport dimension: LxWxH 2000 x 670 x 1260 mm; Approx. Weight: 470kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-41385-485