yapıştırıcı makineleri kullanılmış satılık (576)

Kenar kalınlığı 0,4 - 3 mm İş parçası kalınlığı: maksimum 50 mm En az iş parçası uzunluğu 150 mm Besleme hızı 22 m/dakika

• Edgebander • Serial number 8667702 • Total installed power 22 KW • Edge thickness from 0,40 mm up to 3 mm • Worpiece thickness up to 50 mm • Minimum workpiece lenght 120 mm • Minimum workpiece width 120 mm • Feed motor 1,47 KW • Control • Edge magazine for one edge coil •  Gluing unit with pot for granulated hot melt adhesive • Pressure group with (1+3) rollers • End trimming unit, 1 x motor 0,37 KW-12000 rpm • Profile trimming unit, 4 x motor 0,37 KW-12000 rpm • Profile scraping unit • Edge buffing unit, 2 x motor 0,37 KW-1370 rpm • Operating conditions of this machine: unchecked. • This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A7-50834-190

: 0,4-3 mmWorkingpiece thickness from to: 6-45 mmTotal length: 3700 mmFeed speed: 8 m/min.total power requirement: kwWeight: 850 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

6-60 mm, joint cutter, multi-cutter, copy, scrapers radius/phase, Auction-ID: A1-47366-123

Joint milling, adhesive unit, pressure zone, chop saws, radius milling, radius scrapers, flat scrapers Auction-ID: A1-47366-124

• Edgebander • Edge thickness from 0,40 mm up to 25 mm • Worpiece thickness from 6 mm up to 60 mm • Adjustable feed speed: 8 m/min - 20 m/min • Control • Joint trimming unit, 2 x motor 2 KW-12000 rpm • Edge feeder for strips and roll, edge magazine for one edge coil • HOLZ-HER 1906 cartridge glue system • Pressure group with (1+2) rollers • End trimming unit with 2 motors • HOLZ-HER 1823 fine trimming unit, 2 x motor 0,60 KW-12000 rpm • Profile scraping unit • HOLZ-HER 1983 profile trimming unit • Edge buffing unit • Milling group, motor 3,80 KW-12000 rpm • Sanding belt unit • Operating conditions of this machine: unchecked. • This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A7-50834-84

0: 0,4 - 3 mmWorkingpiece thickness from to: 9 - 60 mmTotal length: - mmFeed speed: stufenlos 8 - 12 m/min.total power requirement: 15 kwDimensions (L/W/H): 4.290 x 840 x 1.690 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- Strip edge thickness from 0.40 mm to 12 mm. - Thickness of the edge in roll from 0.40 mm to 3 mm. - Thickness of the workpiece from 10 mm to 60 mm. - Variable feed rate. - IDM PC OFFICE control. - Entrance spindle moulder group. - Edge loader for slats and roll, edge tray for one roll. - Gluing unit with boiler for granulated hot melt adhesive, with prefuser. - Pressure group with (1+3) rollers. - Cross-cutting group. - Spoke profiling group. - Shape group with 2 motors. - Milling unit tiltable from 0° to 90°, 4 KW motor. - Radius scraper group. - Tail scraper group. - Group of cleaning brushes. - LEISTER hot air blower group. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-50834-59

Used hot-melt edge banding machine (edge bander), marked \"ΠΑΝΞΥΛ\" (Panxyl) in the seller's listing. Condition: - Used machine - Has not been operated for years; needs inspection before use Auction-ID: A7-50988-156

Used automatic edge banding machine FRAVOL, Italian made, model R9 of the RAPID series. It applies PVC, ABS, melamine, veneer and solid wood edging, in strips or from the roll. A compact and sturdy machine, suitable for both industry and small workshops. The machine heats up quickly and is ready for work in 8 - 10 minutes. The pressure units are adjusted automatically, with a pressure bar with a double row of wheels. The two motors of the end trimming unit are adjustable from 0 to 15 degrees and are powered by a 200 Hz frequency converter (inverter). Technical data: Panel thickness: 10 - 60 mm Minimum panel width: 60 mm Minimum panel length: 140 mm (PVC) Edge band width: 15 - 65 mm Edge band thickness: 0.4 - 15 mm Feed rate, adjustable: 6 - 16 m/min Glue pot capacity: 3 kg Voltage: 220/380 V, 50/60 Hz, three-phase Installed power: 7.5 kW Pneumatic pressure: 6 bar Weight: 1900 kg For t ...

Used economical edge banding machine (edge bander) by Kleidara with multiple processing heads. Used for applying edge banding (melamine, PVC or wood) to panels, with gluing, cutting and trimming of the band at the panel edges. An economical option for furniture manufacturers and joinery workshops covering basic edge banding needs. Currently unchecked. Further technical specifications are not confirmed for this specific unit - please contact us for details. Auction-ID: A7-50988-80

- Semi-automatic machine for the application of rubber edges with a \"T\" section on panels of different shapes and dimensions without the aid of counter-templates. - Retractable cutting device. - Applicator with vibration so as not to damage the edge surface. - Heater to facilitate application operation. - Retestador. - Total installed power 6.02 KW. - Thickness of the pieces from 10 mm to 30 mm. - Feed speed 5 m/min. - Table dimensions 1050 x 800 mm. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-50834-52

Used glue spreader with rollers, for uniform glue application on wood surfaces, veneers or edges before pressing or lamination (e.g. plywood laminating, veneering). Brand, exact model and detailed technical specifications not confirmed for this specific unit — please contact us for details. Has not been used for several years, but is in operating condition Auction-ID: A7-50988-7

In working order. Auction-ID: A3-46137-4110

• Edgebander, edge banding machine • Edge thickness from 0,40 mm up to 25 mm • Worpiece thickness from 6 mm up to 60 mm • Minimum workpiece lenght 140 mm • Minimum workpiece width 60 mm • Adjustable feed speed from 8 m/min up to 20 m/min • Feed motor 4,40 KW • HOLZ-HER 1961 joint trimming unit, 2 x motor 2 KW-12000 rpm • Edge feeder for 1 edge coil, edge magazine for 1 edge coil • HOLZ-HER 1907 cartridge glue system with pot for granulated hot melt adhesive • HOLZ-HER 1926 K pressure group with (1+2) rollers • HOLZ-HER 1819 snipping unit, 2 x motor 0,45 KW-12000 rpm • HOLZ-HER 1962 rough trimming unit, 2 x motor 2 KW-12000 rpm • HOLZ-HER 1934 lower profile trimming unit, 2 x motor 0,45 KW-12000 • HOLZ-HER 1933 upper profile trimming unit, 2 x motor 0,45 KW-12000 • HOLZ-HER 1927 profile scraping unit • HOLZ-HER 1964 flat scraping unit • HOLZ-HER 1944 ed ...

- Total installed power 31 KW. - Edge thickness in rolls from 0.4 mm to 3 mm. - Edge thickness in rolls from 0.4 mm to 25 mm. - Thickness of the workpiece from 10 mm to 60 mm. - Variable feed speed from 10 m/min to 25 m/min. - PC Office control. - Input spindle moulding group, 2 x 4 Kw-12000 rpm motor. - Edge loader for 1 roll. - Gluing unit with boiler for granulated hot melt adhesive, with prefuser. - Pressure group with (1+6) rollers. - Cross-cutting group with 2 motors of 0.35 KW-12000 rpm. - Straight roughing group, 2 x 1.03 KW-12000 rpm motor. - Spoke profiling group, 2 x 0.55 KW-12000 rpm motor, tiltable up to 45°. - Spoke profiling group, 2 x 0.35 KW-12000 rpm motor, tiltable up to 45°. - Shape group with 4 motors of 0.35 KW-12000 rpm, with quick release of the motors. - Radius scraper group. - Tail scraper group. - Cleaning brush group, 2 x 0.30 KW-1500 rpm m ...

- Total installed power 8.80 KW. - Edge thickness from 0.40 mm to 16 mm. - Thickness of the workpiece from 10 mm to 60 mm. - Minimum length of the piece 140 mm. - Minimum width of the piece 60 mm. - Adjustable feed speed from 10 m/min to 20 m/min. - 1.50 KW advance motor. - Control. - Edge loader for slats and roll, edge tray for one roll. - Gluing unit with tank for granulated hot melt adhesive. - Pressure group with (1+2) rollers. - Cross-cutting group, 2 x 0.50 KW-12000 rpm motor. - Spoke profiling group, 2 x motor at 12000 rpm. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-50834-6

- Edge thickness from 0.40 mm to 2 mm. - Thickness of the part from 10 mm to 45 mm. - Minimum piece width 90 mm. - Feed speed 6 m/min. - Retestador group. - Spoke profiling unit. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-50834-21

: 0,4-6 mmWorkingpiece thickness from to: 6-60 mmTotal length: 3516 mmFeed speed: 10 m/min.total power requirement: kwWeight: 850 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0,4-8 mmWorkingpiece thickness from to: 8-60 mmTotal length: 4930 mmFeed speed: 10 m/min.total power requirement: kwWeight: 1500 kgControl: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0.4-5 mmWorkingpiece thickness from to: 10-50 mmTotal length: 2730 mmFeed speed: m/min.total power requirement: kwWeight: 720 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0,4-5 mmWorkingpiece thickness from to: 6-45 mmTotal length: 4130 mmFeed speed: 11 m/min.total power requirement: kwWeight: 1250 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0,4-3 /8 mmWorkingpiece thickness from to: 10 - 60 mmFeed speed: 8 / 12 m/min.: Ja Flush/radius/chamfer milling units: Ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0,4-3 / 10 mmWorkingpiece thickness from to: 10 - 60 mmTotal length: ca. 5.100 mm mmFeed speed: 18 m/min.total power requirement: 13 kwWeight: ca. 2.000 kgPremilling unit: Ja : Ja Flush/radius/chamfer milling units: Ja Corner rounding unit: Ja : Ja Flat scraper: Ja Spraying device: Ja Buffing unit: Ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0,4-3 mmWorkingpiece thickness from to: 8-45 mmFeed speed: 9 m/min.total power requirement: 14,5 kwworkpiece length - min.: 140 mmPremilling unit: Ja : Ja Flush/radius/chamfer milling units: Ja Corner rounding unit: Ja : Ja Flat scraper: Ja Buffing unit: Ja Spraying device: Ja : ca. 75.400 : ca. 59.300 mlength in total: ca. 4.700 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

single-sided direct postforming machine Brand: Wehrmann Type: Combima /K/I/R80/1260/V Example offer direct postforming machine Varied using for doors, worktops, furniture parts, curved caravan fronts, etc. Technical data: A single-sided throughfeed postforming machine for the postforming and postfolding process, for processing curved workpieces in caravan construction. For workpieces to be profiled made of wood/wood materials with laminate (CPL,HPL) as surface material. The laminate protruding for the postforming process is located in the machine on the underside of the workpiece and is formed from the bottom to the top. Technical data Machine Constant workpiece projection from the chain conveyor: from approx. 35 mm Throughput width min.: 130 mm ( only for straight parts ) Workpiece length in feed direction min.: 1,000 mm Basic height: 940 mm (upper edge  ...

PUR gluing Brand: GP Service Type: EASY PUR general description - PUR adhesive unit with integrated pre-melt container for a permanent zero joint - greatly reduced maintenance and cleaning costs due to PTFE coating of all assemblies (except glue roller) - suitable for flexible production capacities - order in synchronism adaptable to all common machine manufacturers: - Can be mounted directly on HOMAG machines - also in alternation with original glueing unit! - Stefani with adapter - Biesse with tag - others on request Application height 60 mm, higher on request Feed up to 30 m / min, higher on request low order quantities (

Manufacturer: Schäfer Folienkaschiermaschiermaschine, Type: SIK 1250/R,, Year: 1999, Work piece width min-max mm: 1300, Min.-max. workpiece length in mm: endlos, Min.-max. workpiece height in mm: 3-40, Working widht max mm: 1300, Working width min min mm: 100, Working widht mm: 1300, Working hight mm: 880, Feeding speed min-max m/min: 3-20, Roller diameter mm: 120, Lamination calender: yes, Diameter of lamination calender in mm: 120, Roller diameter mm: 120, at top and bottom: gummiert, pre-coated foil: yes, Main engine kW: 0,37 , FREE TEXT: inkl. Einlaurollgang und Auslaufrollgang 2 mal 3000 mm, Year :1999

Manufacturer: Comil, Type: Astro 700, Hochschränke und Hänger: 680, Work piece width min-max mm: 300 - 2500, Min.-max. workpiece length in mm: 300 - 1300, Min.-max. workpiece height in mm: 800, Working width min min mm: yes, Hydraulical/pneumatical: yes, Min.-max. pressing length in mm: 1300, Min.-max. pressing depth in mm: Pressbalken, Cylinder horizontally: no, Pre-assembling conveyor: 22,5, Feeding speed continous adjustable: jyes, Distribution carriage: yes, Pufferband Länge mm: automatisch, Assembly line 1 tall cabinets: 6, Discharge belt roller conveyor height: 7, Machine rigging: 2860, Press power kg /cm²: 7500, Weight approx. kg: inkl. Auslaufband 800 X 200,

Manufacturer: Italpress, Type: Mark C 18-30, Year: 1994, Durchlauffunierpresse: yes, Dimensions of heating plate approx. mm: 3000 X 1800, Number of storeys: yes, Charging side: längs, Landing opening mm: 200, Steel heating plates: 210 oben/unten 120, Min-max temperature: 145, Heated by: Dampf, Working temperature: 150, Overall pressure kN: 200 bar, Return cylinder N/cm2: yes, Number of pressing cylinders: 8 /Durchmesser 300 mm, Stages: 1, Press length mm: 2800, Pressing width mm: 1700, Transport roller conveyor: Einlaufrollenbahn, Longitudinal through running press: yes, Outlet conveyor: yes, Electrically heated kW: yes, Year :1994