torna kullanılmış satılık (3,058)

Specifications Maximum Turning Length approx. 640 mmFeature ValueTurning diameter over bed approx. 500 mmTurning diameter over carriage approx. 290–300 mmMaximum turning length approx. 640 mm TravelZ-axis ~640 mmTravel X-axis ~212 mm. Auction-ID: A1-43917-2

Distance between centers: up to 1,500 mm, allowing work on medium-length parts. Auction-ID: A1-43934-32

Center-to-Center: 1524 mm Diameter at Base: 406.4 mm Spindle Nose: 57mm 3- and 4-Jaw Chucks Faceplate Fixed and Sliding Rests Chuck Guard Coolant Lightweight Quick-Change Tool Bridge Auction-ID: A1-43934-22

Auction-ID: A7-44294-1

Swing over bed: 500 mm Swing over carriage: 280 mm Distance between centers: 1,500 mm Auction-ID: A1-43934-37

including hydraulic bezel Guide rails from the machine bed should be reground without 4-fold steel holder and chuck visible raw material is not included in the article scope Auction-ID: A7-44294-10

Distance between points: 1500 mm Auction-ID: A1-43934-16

Swing diameter approc: d530 Distance between centers: 2000mm Chuck diameter: d250mm Measuring system Power supply: 400V Auction-ID: A7-44233-4

CENTRE LATHE KNUTH DL 550 / 1500 B with big whirling machine Swing over bed dia. 1100 mm Swing over cross slide dia. 1590 mm Swing in the gap dia. 1270 mm Spindle bore 105 mm Bed width 550 mm Length x width x height: 3510 x 1590 x 1760 mm Weight: 5250 kg Auction-ID: A7-44495-4

: gebraucht : 2020 : 1658 : prompt, Zwischenverkauf v : Bulgarien : 26500 €: 1 : 22600 €: 400 mm: 1000 mm: 200 mm: 52 mm: 235 mm: 320 mm: 6 : 6 M: 12 : 50-2.240 1/min: 80 : 0.015 - 0.6 mm/U: 0.0075 - 0.3 mm/U: 40 : 0.25 - 7.5 mm: 120 - 4 Gänge/: 0.0625 - 1.875 : 235 mm: 110 mm: 50 mm: 4 MK: 100 mm: 4 kW: 2750 mm: 1100 mm: 1600 mm: 1540 kgThis machine is used in our workshop for repair work,therefore it has only been used very little so far.(New price € 36,070.00)driven by manual transmission3-axes digital readout Fagor 40iquick change toolpostMultifix Type Bwith4 holders (3 square, 1 round)3-jaw chuck Bison 3204/DIN6350, Ø 200 mmspindle noseNr. 6 DIN 55027four way rapid traverse devicespindle dead centercoolant equipment1 pce. flange plate for lathe chuckØ 200 mm1 adapter sleevefull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardl ...

Main mechanical data Parameter Value Tip height above bed 260 mm Center width (distance between tips) 1500 mm Circumferential diameter over bed approx. Ø 520 mm (typical for CM260) Bed width: approx. 400 mm Spindle bore (passage) approx. Ø 80 mm Spindle Nose Cam Lock 8\" Weight machine approx. 2550 kg Overall dimensions (L × W × H) approx. 2580 × 1600 × 1950 mm Auction-ID: A1-43917-6

: neu : Bulgarien : 133520 €: 2523.53 €: 1320 mm: 3000 mm: 625 mm: 155 mm: 940 mm: 700 mm: 15 : 160 M: 4 : 3,7 - 15,6, 14,7 - 62, 58 U/Min: 160 : 0.032 - 38.9 mm/U: 0.016 - 19.45 mm/U: 0.5 - 480 mm: 1/16 - 60 Gänge/: 0.125 - 120 : 685 mm: 270 mm: 125 mm: 6 MK: 260 mm: 30 kW: 8550 kgdriven by variable speed control (4 steps)3-axes digital readout FAGOR with CSS (constant surface speed)quick change toolpostAmestra with 4 holders (3 square, 1 round)3-jaw chuck Bison 3204/DIN6350, Ø 500 mmspindle dead centercoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platestailstock quill reducerelectric motor movement of tailstocklow voltage machine lampoperating manualmachine according to ",CE",FURTHER TURNING LENGTHS: turning length1.500 mm € 118 670,00 turning length4.000 mm € 141 700,00 turnin ...

: neu : ca. 4 Monate ab Auftragse : Bulgarien : 107870 €: 2038.74 €: 800 mm: 2000 mm: 400 mm: 260 mm: 560 mm: 560 mm: 318 M: 12 : 8 - 400 1/min: 152 : 0.039 - 15 mm/U: 0.02 - 7.5 mm/U: 76 : 0.5 - 150 mm: 60 - 1/5 Gänge/: 0.125 - 37.5 : 240 - 4/5 : 410 mm: 150 mm: 105 mm: 6 MK: 225 mm: 11 kW: 6000 kgTheir main purpose is to process pipes. Accordingly, this type of machines is widely used in the oil industry.Oil country lathes have large capabilities of processing inner and outer cylindrical and conical threads on pipes with large diameters.The clamping of the pipes with two universals and stands allows the processing of long pipes.These lathes are suitable for producing elements and equipment for the oil industry, as well as for maintaining such facilities.Drive via gearboxElectrodynamic brake3-axis digital display FagorQuick-change tool holder Amestra type C, system like Multifix in ...

faceplate diameter: 10000 mmswing diameter: 14000 mmturning height: 8000 mmControl: Siemens Sinumerik 840 D workpiece weight max.: 500 tfaceplate turning speed range: 0,2 - 35 U/mindrive motor: 300 kWram head dimension: 600 x 600 mmmax. ram stroke: 4000 mmmilling drive: 100 kWhob turning speeds: 3000 U/minrapid traverse x + z axis: 10 m/mintotal power requirement: - kWweight of the machine ca.: 350 tMachine has never been used and is still original, seaworthy packed andstored.equipped with:- CNC control Siemens Sinumerik 840 D- Hydrostatic axes- Hydrostatic table- Milling device- Hirth couplings for tool holderAcessories:• VERTICAL HEAD ISO50 BIG PLUS AD 8T5060164• VERTICAL HEAD ISO50 BIG PLUS AD 6000RPM 8T5060165• HORIZZONTAL HEAD ISO50 BIG PLUS 8T5060163• UNIVERSAL HEAD TU-50- ISO50 AD BIG PLUS 8T5060171• HEAD DANDREA UT-8-800-S 8T5060166• TOOL HOLDER DEVICE 8T1203783• T ...

turning diameter: 380 mmturning length: 580 mmswing dia.: 695 mmX-Axis movement: 234 mmY-Axis movement: 100 mmZ-Axis movement: 575 mmMinimum indexing C-Axis main Spindle: 0,0001 °Number of tools on turret: 12 Number of driven tools: 12 xSpindle speed driven tools: 4500 1/minSpindle motor driven tools: 5,5 / 3,7 kWTool type: Mazak VDI control: MATRIX NEXUS II Main Spindle:: Spindle Speed: 5000 1/minspindle motor: 26 / 22 kWspindle bore diameter: 76 mm2nd Spindle:: spindle turning speed range: 6000 U/minspindle motor: 11 / 7,5 kWspindle bore: 80 mmtotal power requirement: 43 kVAWeight: 5,5 tdimensions of the machine ca.: 2,8 x 2,1 x 1,9 m- Mazatrol Nexus II CNC control- Main and counter spindle- 12-station tool turret with driven tools and Y-axis- 3-jaw chuck-- Main: 8-- Counter: 6- Automatic presetting (Tool Eye).- Automatic workpiece catcher.- Side belt chip conveyor (Mayfran).- Enhan ...

turning diameter: 500 mmturning length: 1200 mmcontrol: Siemens 840D greates pass round over bed: 700 mmMain spindle:: turning speed range - main spindle: 20 - 5000 min/-1power capacity - main spindel: 25 /34 kWmax. Torque: NmC-Axis: 0,0001 °spindle diameter: 67 mmmilling spindle: milling spindle motor: 13 / 22 milling head speed: 12000 U/minb-axis: +/- 110 °axis stroke:: x-axis: 450 mmy-axis: +/- 100 mmz-axis: 1300 mmfeeds:: rapid traverse ( X / Y / Z ): 60 / 22,5 / 30 m/minfeed power: 5,6 / 5,6 / 7,4 kNturret:: number of toolpositions: 24 pos.tool taper: Capto max. chucking diameter: 250 mmtail stock: tailstock quill taper MT: 5 tailstock adjustment: 1200 mmtotal power requirement: 65 kVAweight of the machine ca.: 8 tdimensions of the machine ca.: 6 x 2,7 x 2,1 mCNC - Turning and milling centre - 5 axes simultaneous- CNC control Siemens 840D SolutionLine with ShopTurn- C-axis  ...

turning diameter: 340 mmturning length: 950 mmcontrol: OSP P300L turning diameter over bed: 580 mmturning dia. over face-slide: 470 mmWorkingspindle:: power capacity - main spindel: 22/15 kWturning speed range - main spindle: 45 - 5000 U/minspindle diameter: 120 mmspindle bore: 80 mmmax. bar capacity: 72 mmspindle head: JIS A2-6 spindle cone: 82 x 2° Torque: 350 Nmtravel -z axis: 1010 mmfeed per revolution: 0,001 - 1.000 mmrapid traverse: 30 m/minx - axis: travel -x axis: 260 mmfeed per revolution: 0,001 - 1.000 mmrapid traverse: 25 m/minC-Axis: 0,001 °Rapids C - Axes: 200 min -1rapid traverse: 12 m/miny-axis: 120 mmtotal power requirement: 31,7 kVAweight of the machine ca.: 4,6 tdimensions of the machine ca.: 2,2 x 1,8 x 1,8 mâ½ing and milling centreequipped with:- CNC control OSP P300L- NC tailstock- 12-position turret with driven tool station (BMT 60) 6000 rpm- C, Y-axis- Chip ...

Machine serviced, checked for operation and geometry Everything works and is in good condition Auction-ID: A1-42356-1

Guide and pull spindle lathe- 4-jaw chuck 200mm- Multifix steel holder size B- Foot brake- Chip panTurning diameter over bed 420 mmTurning diameter over support 290 mmTurning length 900 mmSpeed 40 - 2000 rpmCenter height 210 mmSpindle bore 38 mmTotal power requirement 4.0 KWMachine weight approx. 0.9 tDimensions approx. 2.4 x 1.1 x 1.3 m Condition: untested (6) Auction-ID: A7-44032-499

Manufacturer: HARDINGEYear: 2005Type: CNC Motorized Tool Lathe with C-AxisNumerical Control: FANUC 21i-TBBar Capacity: Ø 51 mmMax. Turning Circle: Ø 310 mmMax. Turning Length: 470 mmChuck: Ø 200 mm (8\")Bed Inclination: 45°Spindle: 50–5,000 rpm – 18.5 kW (max) / 11 kW (continuous)Turret: 12 stations, all motorable positionsMotorized implements: 4,000–5,000 rpm – 3.7 kWFast feeds: X/Z 19 / 24 m/minAccuracy: ±0.005 mmIncluded equipment: Programmable C-axis (0.001°), IEMCA Boss 545 bar feederWeight (kg): approx. 4200 Auction-ID: A1-44030-155

To participate in the auction it is necessary to pay 10% of the starting price as a deposit. Ask the contact person by email to matteo.tosin@surplex.com for the bank details for the transfer. Caution: Contents on the machine are excluded Auction-ID: A7-43767-32

Guide and tension spindle latheThree-jaw chuck 200mmMultifix steel holder size B3 pcs. Multifix cassettesEmergency stop deviceTurning diameter over bed 370 mmTurning diameter over support 200 mmTurning length 1000 mmCenter height 185 mmSpindle bore 56 mmTailstock quill holder MK 4Speed 50 - 2000 rpmDrive power 4.0 kWMachine weight approx. 1.4 tDimensions approx. 2.3 x 1.1 x 1.3 m Auction-ID: A7-44032-403

a lot of accessories, machine serviced, checked for operation and geometry Everything works and is in good condition Auction-ID: A1-42356-3

CNC Control: GE FANUC Series 16i-TNumber of axes: 2 (with sub-spindle)Main spindle: ASA 5 nose, max. bar passage 42 mm, power 11 kW, max. speed 6,000 rpmMax. rotation diameter: 519.2 mmMax. turning diameter: 308 mmX/Z axis strokes: 189.2 / 406 mmTurret: VDI 30 bidirectional, 16 positions (16 motorized)Sub-spindle: ASA 5 nose, max. bar passage 42 mm, power 7.5 kW, max. speed 6,000 rpmIncluded equipment: parts catcher, motorized tools and stationary tools (depending on seller)Weight (kg): 5071Year & Manufacturer: 2001 – HARDINGE Auction-ID: A1-44030-87

CNC lathe for metal part turning operations. Numerical control: Fanuc 18TAxes: 3-axisTurret: 12 fixed positions + 6 rotating positionsChuck: Ø 200 mm (possibility of mounting clamps in the spindle)Distance between tips: 350 mmSpindle speed: 4,000 rpmSpindle passage: 51 mm Auction-ID: A1-44030-71

Manufacturer: CAZENEUVEModel: CT 200Year: 2000Type: CNC lathe with learning (conversational)CNC control: NUM 1040 T PlusSerial number: 20177Inclined bed CNC lathe with 4 slides, allowing use in CNC mode and in learning mode with conversational. Machine suitable for precision turning work and small to medium series. Capacities communicated by the seller:• Distance between tips: 800 mm• Maximum spindle speed: 4,000 rpm (high-precision cartridge spindle – chuck speed to be checked)• Maximum permissible weight in mandrel: 200 kg• Maximum weight between tips (without bezel): 800 kgSpindle:• Spindle nose A1-6\" – DIN 55026• Advertised bore: Ø 42 or 54 mm (depending on configuration)Equipment listed by the seller: • Duplomatic 12-position bidirectional automatic turret – VDI 30• Ø 200 mm Gamet chuck with jaw sets• CoolantAdditional data:• Machine net weight: approx.  ...

Lathes with:- Digital display- Rapid traverse- Röhm 3-jaw chuck 315mm- 4-fold steel holder - 2 pcs. steady rest- Coolant system- Emergency stop device- Machine light- Chuck protection- 2 pcs chip trays- Replacement jaws (inside and outside)Turning diameter over bed 820 mmTurning diameter over support 575 mmTurning length 3300 mmCenter height 410 mmRotation diameter in the offset mmSpindle bore 125 mmSpindle speeds 7.1 - 1400 rpmTotal power requirement 22.0 kWMachine weight approx. 6.0 tSpace requirement approx. 6.3 x 1.6 x 2.0 mm Auction-ID: A7-44032-463

CNC Control: FANUC 18i-TNumber of Axes: 5 (Twin-Spindle Configuration)Main Spindle: PresentSub-Spindle: Turrets: 2 Turrets with MotorizedTools Configuration: Combined Turning and MillingWeight (kg): Approx. 9000Year & Manufacturer: 2004 – HARDINGE Auction-ID: A1-44030-89

Manufacturer: YAMAZAKI MAZAKModel: Quick Turn 20Year: 1998Numerical Control: Mazatrol T PlusAxes: 2 Axes (X, Z)Capacities:Max. diameter above bed: Ø 300 mmDistance between points: 446 mmX-axis stroke: 180 mmSpindle:Bore: 61 mmMax. speed: 4500 rpmEngine power: 15 kWTurret: 8 positionsDimensions per machine: 2660 x 1520 x 1879 mmUnit weight: approx. 4170 kg (total batch weight approx. 8340 kg)Condition:used Lot sold as a single set (2 machines) Auction-ID: A1-44030-46

Spindle Ø mm 350 To participate in the auction it is necessary to pay 10% of the starting price as a deposit. Ask the contact person by email to matteo.tosin@surplex.com for the bank details for the transfer. Caution: Contents on the machine are excluded LOCATION : VERMEZZO (MI) Auction-ID: A7-43767-60