torna kullanılmış satılık (3,063)

Upper support, upper slide, dovetail guide, tool slide, cross table, support slide, support carrier, slide guide-Tool slide: Support slide lower part support carrier-Dovetail: 90 to 73 mm 12 mm high-Dimensions: see photos-Quantity: 5x bottoms available-Price: per piece-Dimensions: 210/180/H25 mm-Weight: 4 kg/piece

Upper support, upper slide, dovetail guide, tool slide, cross table, support slide, support carrier-Tool slide: Support slide support carrier with turning tool holder-Clamping height: 40 mm-Dimensions: see photos-Dimensions: 370/180/H170 mm-Weight: 17.8 kg

Chuck flange, flange mount, lathe chuck flange, driving flange, lathe chuck face plate, chuck flange for power chucks -Chuck flange: for power chucks, three-jaw chucks, four-jaw chucks, faceplate -Type: 55021/22-6 Ø 210 mm -Passage: Ø 44 mm -Bolt circle: Ø 105 mm -Mounting: cone Ø 79-82 mm -Dimensions total Ø 205 x 160 mm -Weight: 6.3 kg

Chuck flange, flange mount, lathe chuck flange, driving flange, intermediate flange, lathe chuck face plate, mounting flange-Chuck flange for: driving heart, three-jaw chuck, four-jaw chuck, faceplate-Outside: Ø 250 mm-Adapter: -Short cone: size 8 (Ø135-139 mm)-Bolt circle: Ø 170 mm-Dimensions: Ø 250 x 175 mm-Weight: 14.1 kg

Chuck flange, flange mount, lathe chuck flange, driving flange, lathe chuck face plate, chuck flange for power chucks-Manufacturer: Röhm, chuck flange for power chucks, three-jaw chucks, four-jaw chucks, faceplate-Type: 55021/22-6 Ø 210 mm-Bolt circle: Ø 133 mm-Dimensions total Ø 210 x 170 mm-Weight: 12.4 kg

Chuck flange, flange mount, lathe chuck flange, driving flange, intermediate flange, lathe chuck face plate, mounting flange-Chuck flange: mounting flange-Outside: Ø 198 mm-Bolt circle: Ø133 mm / M12-Hole: Short taper 6, cone Ø 102 - 105 mm-Dimensions total Ø 198 x 55 mm-Weight: 4.0 kg

Chuck flange, flange holder, lathe chuck flange, driving flange, intermediate flange, lathe chuck face plate-Chuck flange: for three-jaw chuck, four-jaw chuck, faceplate-Type: 8230-160/5-Outside: Ø 160 mm-Bolt circle: Ø105 mm-Mounting: Short taper 5, cone Ø 79 - 82 mm-Dimensions total Ø 160 x 65 mm-Weight: 2.2 kg

Yatak / yüz kızağı / krank üzerinde dönüş çapı: 460mm / 258mm / 785mm, merkez genişliği: 1016mm, yatak genişliği: 300mm, mil deliği: 58mm, hız: 2000rpm, çap kurşun vida / tüy: 35mm / 65mm, tüy ayarı: 127mm. Makine boyutları X/Y/Z: yaklaşık 1900mm/850mm/1200mm, ağırlık: yaklaşık 1650kg. Belgeler mevcut. Yerinde inceleme mümkündür. Mayıs 2025'in sonundan itibaren satışa sunulması bekleniyor.

Merkez yüksekliği: yaklaşık 230 mm, merkez genişliği: yaklaşık 1000 mm, yatak üzerindeki yörünge çapı: yaklaşık 480 mm, destek üzerindeki yörünge çapı: yaklaşık 200 mm, iş mili deliği: yaklaşık 45 mm, iş mili hız aralığı: 2000 rpm, tahrik gücü: 4kW, makine boyutları X/Y/Z: yaklaşık 2400 mm/1000 mm/1500 mm, ağırlık: yaklaşık 1700 kg. Yerinde inceleme mümkündür.

yatak üzerinde dönüş çapı: 540 mm, torna çapı: 240 mm, işleme uzunluğu: 330 mm, travers yolu: X / Y: 135 mm / 350, iş mili çapı: 40 mm, hız: 4400 rpm. Takım konumları: 12, maks. takım boyutu kare/yuvarlak: 19mm/31mm, ayna boyutu: 152mm, travers hızı X/Z: 12/16 m/dak. Boyutlar X/Y/: yaklaşık 2200mm/1700mm/1700mm, ağırlık: yaklaşık 3600kg, kontrol: GE Fanuc 18T.

Eksenler: XYZCB (8 eksen), maks.tornalama çapı: 250mm, maks.tornalama uzunluğu: 300mm, çubuk yükleyici çapı: 65mm, takım sistemi: VDI30/diş profili, tork: 150Nm, hız: 5000rpm, tahrik gücü: 22kW, kontrol: Siemens Sinumerik 840D elektrik hattı. Boyutlar X/Y/Z: yaklaşık 2430 mm/5600 mm/2430 mm, ağırlık: yaklaşık 13000 kg, çalışma saatleri: yaklaşık 34624 saat, iş mili saatleri: yaklaşık 22797 saat.

Chuck flange, flange mount, lathe chuck flange, driving flange-Chuck flange: for three-jaw chucks, four-jaw chucks, face plates-Outer: Ø 210 mm-Inside: Ø 76 mm-Take: short taper 6, cone Ø 105 mm-Dimension: Ø 210 x 65 mm-Weight: 3.5 kg

Yatak / yatak kaydırağı üzerinde salıncak çapı: 480 mm / 340 mm, dönüş uzunluğu: 800 mm, merkez mesafesi: 1000 mm, girintide salıncak çapı: 540 mm, mil deliği: 52 mm, hız: 1400 rpm. Tüy konikliği: MK4, manuel tüy ayarı: 160 mm, üst kısım yer değiştirmesi: 10 mm. Makine boyutları X/Y/Z: yaklaşık 2600mm/1100mm/1350mm, ağırlık: yaklaşık 2300kg. Yerinde inceleme mümkündür.

CNC kontrollü REM dik torna tezgahı mevcuttur. Çalışma çapı: 2500mm-7000mm, çalışma yüksekliği: 1000mm, kontrol: Siemens 840D. Tahrikli aletler dahil. Yerinde inceleme mümkündür.

Upper support, upper slide, dovetail guide, tool slide, cross table, support slide, support carrier-Tool carriage: support carriage support carrier-Support plate: 265 x 180 mm-Dimensions: see photos-Dimensions: 290/280/H70 mm-Weight: 21.1 kg

A WMW lead and feed spindle lathe that was overhauled in 1993 and has not been used since then is available. Center width: 1600mm, turning length: 1600mm, turning diameter: 250mm, turning diameter over bed/cross slide: 450mm/250mm, steel holder surface X/Y: 140mm/140mm, steel cross-section: 25mm/25mm. Speed: 2240rpm, spindle bore: 45mm, faceplate diameter: 450mm, quill stroke: 160mm, max. workpiece weight: 800kg/1250kg, max. journal diameter: 60mm. Including taper turning device, coolant device and quadruple steel holder. Documentation available. On-site inspection is possible. The machine was not used after its overhaul in 1993.

chuck flange, flange holder, lathe chuck flange, driving flange, intermediate flange, lathe chuck faceplate-Chuck flange: for three-jaw chuck, four-jaw chuck, faceplate-Outside: Ø 292 mm-Inside: Ø 22 mm-Hole circle: Ø212/10 mm / Ø108/11 mm-Dimensions total Ø 292 x 23 mm-Weight: 8.2 kg

chuck flange, flange holder, lathe chuck flange, driving flange, intermediate flange, lathe chuck faceplate-Chuck flange: for three-jaw chuck, four-jaw chuck, faceplate-Outside: Ø 250 mm-Inside: Ø 100 mm-Hole circle: Ø180 mm/ M10 / Ø230/10 mm-Dimensions total Ø 250 x 23 mm-Weight: 6.1 kg

A CNC double-spindle lathe Hyundai with a new bar loader Iemca (Bucci) is available. 1) CNC lathe Hyundai HD2200 SY, turning diameter: 300mm, turning length: 610mm, spindle passage: 65mm, speed: 4000rpm, power: 18.5kW, chuck size: 8 inch, counter spindle passage: 52mm, speed: 6000rpm, chuck size: 5 inch, Y-axis: +/-55mm, tool positions: 24, rapid traverse X/Y/Z: 24m/10m/30m/min, operating hours: 3330h, manufactured parts: 44478. 2) Bar loader Iemca (Bucci) Master 865/33/Mp, year of manufacture: 2023, round bar diameter range: 8mm-65mm, hexagonal bars: 7mm-55mm, square bars: 10mm-45mm, bar length range: 800mm-4300mm, remaining piece length with diameter below 65mm min./max.: 110mm/400mm. Documentation available. On-site inspection is possible.

chuck flange, flange holder, lathe chuck flange, driving flange, intermediate flange, lathe chuck faceplate-Chuck flange: for three-jaw chuck, four-jaw chuck, faceplate-Outside: Ø 203 mm-Mount: M70 x 6.5-Hole circle: Ø150 mm / M12 / Ø126/17 mm-Dimensions total Ø 203 x 60 mm-Weight: 6.4 kg

EMAG CNC dik torna tezgahı mevcuttur. Ayna çapı: 250 mm, yörünge çapı: 260 mm, hareket X / Z: 570 mm / 200 mm, hızlı travers X / Z: 60m / 30m / dak, besleme kuvveti X / Z: 5kN, bilyalı vida çapı X / Z: 40 mm, mil yatak çapı ön: 110 mm, hız: 4500 rpm, güç: 18 / 28kW, şaft çapı: 40mm, tahrikli aletlerin gücü: 12kW, hız: 6000rpm. Makine boyutları X/Y/Z: yaklaşık 2700mm/2100mm/2400mm, ağırlık: yaklaşık 7000kg, açılma süresi: 50416h, otomatik süre: 9016h. Belgeler mevcut. Yerinde inceleme mümkündür.

Yatak/yüz kızağı üzerinde salıncak çapı: 570 mm/420 mm, dönüş çapı: 420 mm, dönüş uzunluğu: 635 mm, travers yolu X/Z: 220 mm/635 mm, hız: 5000 rpm, iş mili deliği: 79 mm, maks. çubuk çapı: 65 mm. Takım konumları: 12, tahrikli takımlar: 6, takım tutucu: VDI 30, hızlı travers X/Z: 24m/30m/dak. Makine boyutları X/Y/Z: yaklaşık 3500mm/2500mm/2000mm, ağırlık: yaklaşık 4500kg. Yerinde inceleme mümkündür.

X ekseni: 607 mm, z ekseni: 286 mm, iş mili hızı: maks. 6000/dak, kontrol: Fanuc 32i A, uzunluk: 4600 mm, genişlik: 1600 mm, yükseklik: 2700 mm, ağırlık: 2,1 t, çalışma saatleri: 34.536 saat. Otomasyonlu FMB Unirobot LR MATE 200iD7L-P2TB, taşlama mili Jäger HF-Spindle, ayna MicroCentric 4-410-3-QC, otomatik boyutsal kompanzasyonlu MARPOSS ölçüm sistemi, yağ buharı filtresi S400, kayış filtresi Knoll KF110/500, menteşeli bantlı konveyör 320 S1 ve diğer aksesuarlar. Yerinde inceleme mümkündür.

Turning length: 450mm, spindle clearance: 65mm, speed: 4000rpm, main spindle/counter spindle power: 18.5kW/11kW, tool positions: 10, driven tools: 10, hydraulic capacity: 150l, hydraulic pressure: 60bar, connected load: 39kW. Rapid traverse X1/X2: 15m/min, feed force: 5000N, feed path: 140mm. Rapid traverse Z1/Z2: 30m/min, feed force: 8000N, feed path: 450mm. Rapid traverse Y1: 6m/min, feed force: 8000N, feed path: +/-35mm. Machine dimensions X/Y/Z: approx. 4150mm/2000mm/1800mm, weight: approx. 4750kg, control: Traub System TX 8F, operating hours: 78825h. Documentation available. On-site inspection is possible.

A CNC double-spindle lathe Traub overhauled in 2025 is available. Turning length: 450mm, spindle clearance: 65mm, speed: 4000rpm, main spindle/counter spindle power: 18.5kW/11kW, tool positions: 10, driven tools: 10, hydraulic capacity: 150l, hydraulic pressure: 60bar, connected load: 39kW. Rapid traverse X1/X2: 15m/min, feed force: 5000N, feed path: 140mm. Rapid traverse Z1/Z2: 30m/min, feed force: 8000N, feed path: 450mm. Rapid traverse Y1: 6m/min, feed force: 8000N, feed path: +/-35mm. Machine dimensions X/Y/Z: approx. 4150mm/2000mm/1800mm, weight: approx. 4750kg, control: Traub System TX 8F, operating hours: 12938h. Including chip conveyor and bar loader LNS Quick Load. Documentation available. On-site inspection is possible.

Heavy-duty lathe, turning machine, lathe, center lathe, center lathe -Machine bed: in very good condition -Manufacturer: Martin, lead screw lathe type DLZ 502 -Turning length: 2200 mm -Turning Ø over bed: 580 mm -Turning Ø over support: 300 mm -Spindle bore: Ø 65 mm -Spindle speeds: 22.4 - 1000 rpm -Wedge bar chuck: Forkardt Ø 320 mm -Tailstock mount: MK5 -Drive: 7.5 kW -Accessories: 4x steady rests, tool holder, tools see photos -Dimensions: 1260/3720/H1260 mm -Weight: 2510 kg

Yatak/yüz kızağı üzerinde dönüş çapı: 420mm/280mm, dönüş uzunluğu: 1000mm, mil deliği: 78mm, maks.hız: 3550rpm, tahrik gücü: 35kW, takım konumları: 12 (tahrikli aletlerle), takım tutucu: VDI50, hızlı travers: 10m/dak. Makine boyutları X/Y/Z: yaklaşık 4100mm/2300mm/2200mm, ağırlık: yaklaşık 10000kg, kontrol: C eksenli Siemens 840T. Bir tampon pil değişiminden sonra, makinenin yazılımı silindi, bu nedenle bazı makine parametreleri belgelenmeden silindi ve otomatik çalışma şu anda imkansız. 2025'in 1. çeyreğinden itibaren satışa sunulması bekleniyor.

A high-precision Takisawa CNC lathe with double spindles is available. Spindle power: 2x 7.5kW, speed: 5000rpm, spindle nose: F-80, tool holder: 2x 5 places, max. turning diameter: 50mm, max. turning length: 50mm, max. workpiece weight: 2x 0.5kg. Machine dimensions X/Y/Z: approx. 2600mm/2550mm/2150mm, weight: approx. 4300kg, control: 2x Fanuc Oi-TF, operating hours: 11179h. Including hinged belt conveyor to the rear, automatic central lubrication, machine cladding with coolant pump, portal loader type D, Raku Raku loader, turning station, automatic loading and unloading door per spindle and storage chute for test part. Documentation available. On-site inspection is possible.

Turning diameter over bed/face slide: 630mm/340mm, turning length: 2000mm, center height: 290mm, clearance: 70mm, speed: 1180rpm, chuck: 400mm wedge bar chuck, tailstock: MK5, total power requirement: 15kW, machine dimensions X/Y/Z: approx. 5000mm/1350mm/1500mm, weight: approx. 4500kg. Including 2x 340mm steady rests, 2x medium steady rests, face plate with a diameter of 630mm, 2x face plates with cross slots, various tool holders, steady rest box, tool cabinet with additional tools, Heidenhain position indicator and 400mm key bar chuck. Documentation available. On-site inspection is possible.

Dönüş çapı: 200mm, dönüş uzunluğu: 400mm, dönüş çapı: 420mm, çubuk çapı: 60mm, maks.mil aynası çapı: 160mm, hız: 5000rpm, taret: 2, pozisyonlar: 2x14, hızlı travers X/Z: 20m/dak/30m/dak. Makine boyutları X/Y/Z: yaklaşık 7500mm/2100mm/2100mm, ağırlık: yaklaşık 4500kg. Belgeler mevcut. Yerinde inceleme mümkündür.