torna kullanılmış satılık (3,113)

turning diameter over bed: 1600 mmturning diameter over slide rest: 1280 mmturning length: 5000 mmcentre height: 800 mmspindle turning speed range: 1 - 200 U/minspindle bore: 105 mmspindle diameter in front bearing: 120 mmmain drive motor: 75 kWmax. workpiece weight between centres: 30000 kgworkpiece weight in steadies max.: 40000 kgbed slide rapid adjustment: 4000 mm/min.total power requirement: ca. 100 kWweight of the machine ca.: 52 tRefurbished in 2020 and equipped with:- 4-jaw faceplate Ø 1600- thread cutting- 4-fold heavy duty tool holder- Hardened tracks- tailstockdiffenret Steadies, chip conveyor and other accessories, available upon requestThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 256 mmturning length: 530 mmcontrol: Fanuc 31i-A turning diameter over bed: 550 mmturning diameter over cross slideways: 350 mmmain spindle:: max. turning speeds: 6000 min/-1Drive power - main spindle: 11 kWmax. torque: Nmmax. rod diameter: 45 mmspindle head: A2-5 chucking diameter: mmtool turret:: shaft height for square tool: 25 mmDrill shank diameter: 50 mmtravel:: x-axis: 210 mmz-axis: 560 mmfeeds:: rapid traverse: x 20 / z 24 m/mintotal power requirement: kWweight of the machine ca.: 7,7 tdimensions of the machine ca.: L 4,18 x B 2,01 x H 1,98 mTechnical Specifications:- Manufactured in 2017 but not put into operation until 2021- Fanuc 31i mod A CNC control- Y-axis- 20 bar tool cooling- Fedek bar loader- Chip conveyor- 12-station tool turret- 10 rotating toolsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Turlama uzunluğu: 1500 mm Büyük Yatak üzerinden geçiş diametri: 490 mm dönüş diametri: 280 mmKontrol: Heidenhain Manuel Plus Hız aralığı - en alı: 3000 U/minmil çapı: 65 mm güç kapasitesi - iş parçası gücü: 12/16 (100/60%) kW ağırlığı makinenin yaklaşık %: 3,5 tEkipman/Aksesuarlar:- Sabit dinlenme - Çakma - Takım tutucuları - Matkap uçları - Uçlar - Multifix tutucu Bu reklamın verileri LogoTech oHG'nin yazılım çözümü olan ModulMWS ile oluşturulmuştur.

turning diameter over bed: 500 mmturning diameter over slide rest: 330 mmturning diameter in the gap: 600 mmturning length: 3000 mmbed width: 505 mmspindle bore: 72 mmspindle head: DIN 55022 Gr. 8taper in tailstock: MK 5 turning speed range: 22,4- 1120 U/minpower requirement: 18,5 kWdimensions: 5,3 x 1,75 x 1,53 mweight of the machine ca.: 5,2 tused lathe in nice condition with digital scale- 2 axis digital scale- 4 jaw chuck Ø 250 mm- 3 jaw chuck Ø 260 mm- Multifix C toolholder system- some toolholders- steadyThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 390 mmturning diameter over slide rest: 190 mmturning length: 1000 mmturning dia. in gap: 460 mmspindle head: DIN 55026 Gr. 6spindle bore: 52 mmturning speed range: 11,2 - 2240 U/minpower requirement: 7,5 kWbed width: 355 mmdimensions: 2,8 x 1,3 x 1,6 mweight of the machine ca.: 1,9 tEquipment: - Multifix B with 5 pic. toolholders - 3-jaw-chuck Ø 250 - coolantsystem - 2-axis digital readout Heidenhain - some jawsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

centre height: 400 mmcentre distance: 3.000 mmmax. swing over bed: 810 mmmax. swing over facing slide: 510 mmmax. swing-dia. in gap: 850 mmcontrol: WEILER max. workpiece weight: 3.800 kgspindle diameter in front bearing: 150 mmspindle bore: 106 mmfaceplate diameter: 630 mmworktool system: Parat tailstock quill taper MT: 6 dia. of quill: 115 mmspindle turning speed - stepless: 1 - 1.800 U/minLathe - cycle-controlled | WEILER - E80 x 3000 equipped with 630mm faceplate, 400mm SCHUNK ROTA-S plus chuck, boring bar attachment, PARAT tool system as well as a chip conveyor.A comprehensive tool package is included in the scope of delivery.The machine video from the production plant will be shared on request.The machine is in good condition and can be inspected under power at any time.Please refer to further technical details in the attachement of the offer.- - - - - - - - - - - - - - - - - - - - ...

turning diameter: 430 mmturning length: 1500 mmcontrol: OSP P300 turning diameter over bed: 670 mmturning dia. over face-slide: 480 mmWorkingspindle:: power capacity - main spindel: 30/22 kWturning speed range - main spindle: 0 - 3000 U/minmax. bar capacity: 95 mmspindle head: 11 JIS A-2 / ASA travel -z axis: 1500 mmfeed per revolution: 0,001 - 1.000 mmrapid traverse: 30 m/mintravel -x axis: 270 mmfeed per revolution: 0,001 - 1.000 mmrapid traverse: 25 m/minC-Axis: 0,001 °Rapids C - Axes: 200 min -1rapid traverse: 12 m/mintravel -y axis: 120 mmtotal power requirement: 29 kVAweight of the machine ca.: 8,6 tdimensions of the machine ca.: 4,3 x 2,25 mCCNC turning and milling centerequipped with:- CNC control OKUMA OSP P300- 12-fold Tool Revolver for driven tools- Tailstock- Chip conveyor- self-centering Chuck 315 mm Autoblock- 2 motorized radial modules- 2 axial modules for thermal expans ...

turning diameter over bed: mmturning diameter over slide rest: mmturning length: mmtotal power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 750 mmy-travel: 210 mmz-travel: 1150 + 100 mmcontrol: Fanuc MSX-701III Maximum turning diameter: 660 mmMax. turning length: 1498 mmDiameter over cross slide max.: 400 mmnumber of spindle speeds: 3000 U/mintool piece magazine with: 40 Plätzenturret: 10 Fachtotal power requirement: 90 kVAweight of the machine ca.: 26,6 tdimensions of the machine ca.: 5301 x 2997 x 2788 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 376 mmturning length: 760 mmcontrol: Fanuc x-axis: 260 mmz-axis: 830 mmtotal power requirement: kWweight of the machine ca.: 6000 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

dönme çapı: 430 mm torna uzunluğu: 519-525 mmkontrol: Mori seiki MSX-805 x ekseni: 230 mmz ekseni: 520 mm toplam güç gereksinimi: kW makinesinin ağırlığı ca.: 4100 kgMakinenin boyutları ca.: mBu reklam için veriler, LogoTech oHG'nin yazılım çözümü olan ModulMWS ile oluşturulmuştur.

: 0560 mm: 390 mm: 2000 mm: 280 mm: 80 mm: 11,25 kWspindle turning speed - stepless: 20-2000 U/minspindle taper: K 8 DIN 55027 0The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 376 mmturning length: 760 mmcontrol: FANUC I-Series Plus greates pass round over bed: 780 mmswing diameter over slide rest: 630 mmmax. turning diameter: 376 mmspindle turning speed range: 4000 U/minspindle drive motor: 22 / 15 kWspindle nose: ASA A2-8 spindle bore: 81 mmbar material dia.: 76 mmc-axis: 0,001 °chucking diameter: 255 mmNumber of tools: 12 St.travel -x axis: 260 (72 + 188 ) mmtravel -z axis: 830 mmtravel -y axis: 105 (+/- 52,5) mmdiameter of quill: 100 mmquill stroke: 100 mmtailstock taper MT: MT 5 total power requirement: 41,98 kVAweight of the machine ca.: 6,1 tdimensions of the machine ca.: 4,0 x 2,5 x 2,2 mCNC control FFANUC I-Series Plus- chip conveyor- driventools 5000U/min, 7,5kW- C-axis- hydraulic unit- tailstock- coolant 7 bar- bar loader interfaceCapto C3 straight chair: 2Capto C3 90° chair: 1ER20 Capto chuck: 10ER32 Capto chuck: 4Weldon-to-Capt ...

turning diameter over bed: 3750 mmturning diameter over slide rest: 3250 mmturning length: 15000 mmcentre distance: 15000 mmfaceplate: 3000 mmworkpiece weight: 120 tsteady: + 15t Rest: 2 main drive: 119 kWspindle bore: 105 mmspindle turning speed range: 0,33 - 75 U/minfeed in x - axis: 300 mm/minfeed in y - axis: 150 mm/mintailstock quill diameter: 500 mmtotal power requirement: ca 140 kWweight of the machine ca.: - tdimensions of the machine ca.: - m- 2-Carriages- Face Plate 3000mm- 6-Steady Rests- 4-Way Bed Construction- Taper Attachment- Inch/Metric Threading- Tailstock With Live CenterThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0360 mm: 215 mm: 1000 mm: 180 mm: 42 mm: 2,25/3,75 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0360 mm: 215 mm: 1000 mm: 180 mm: 42 mm: 3,75 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

dönüş çapı: 550 mm dönüş uzunluğu: 1500 mm kontrol: Fagor 8055 x ekseni: 108 mmz ekseni: 3000 mm toplam güç gereksinimi: kW makinenin ağırlığı ca.: makinenin boyutları ca.: mBu reklam için veriler, LogoTech oHG'nin yazılım çözümü olan ModulMWS ile oluşturulmuştur.

turning diameter: 500 mmturning length: 1000 mmcontrol: MONFORTS CONTROL control: SYSTEM EURO TURN turning diameter over bed slide: 290 mmspindle bore: 70 mmspindle turning speed range: 3 - 2800 U/minspindle power: 15 kWmax. torque on the spindle: 1530 Nmspindle head: DIN 55027 Gr. 8 feed power X/Z axis: 11300 Nrapid travel - longitudinal/face: 10 / 5 m/minbed width: 360 mmtravel of cross-slide: 265 mmupper slide travel: 140 mmturning tool - shaft cross cut: 32 x 25 mmtailstock quill diameter: 80 mmtailstock quill stroke: 160 mmtailstock taper MT: 5 total power requirement: kWweight of the machine ca.: 3,1 tAccessories: 3-jaw chuck ROTA-S plus 250 mmø, 4 pos. toolholder PARAT, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

torlama çapı: 1.320 mm torna uzunluğu: 5000 mm sallanma çapı: 1250 mm iş parçası ağırlığı: 14 dönme çapı: 900 - 950 mm toplam güç gereksinimi: makinenin 45 kW ağırlığı yaklaşık 18 tBu reklamın verileri, LogoTech oHG'nin yazılım çözümü olan ModulMWS ile oluşturulmuştur.

Yatak üzerinde dönme çapı: 340 mm sürgü dayağı üzerinde dönüş çapı: 177 mm dönüş uzunluğu: 630 mm mil dönüş hızı - basamaksız: 55-3000 U/min makinenin ağırlığı ca.: 1.55 makinenin boyutları: 2 x 1 x 1.6 mDijital okuma HEIDENHAINMisc.accessorieswww.marcels-maschinen.ch Bu reklamın verileri, LogoTech oHG'nin yazılım çözümü ModulMWS ile oluşturulmuştur.

faceplate diameter: 4.000 mmtravel -x axis: 4.500 mmtravel -z axis: 600 mmcontrol: Siemens Sinumerik 840D-sl feed range: 0 - 8.000 mm/minturning speeds: 1) 0,7 - 5,6 U/minturning speeds: 2) 2,8 - 22,4 U/minturning speeds: 2,1 - 56 U/mintool taper: Sauter Facing Lathe | ZERBST - DP05/W08 Scope of delivery:- Chip conveyor- Hydraulic unitThe ZERBST - DP05/W08 has been retrofitted in 2010.The machine is in a well-maintained condition.Please refer to further technical details in the attachement of the offer.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: DP05W08 | DP05 W08 | DP05-W08The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Turlama çapı: 330 mm dönüş uzunluğu: 650 mm mil dönüş hızı - basamaksız: 30-5000 U/min-spindle konik: ASA A2-5 kontrolü: FANUC 18i-T Bu reklamın verileri, LogoTech oHG'nin yazılım çözümü olan ModulMWS ile oluşturulmuştur.

greates pass round over bed: 670 mmswing diameter over bed slide: 490 mmmax. turning diameter: 490 mmcontrol: SIEMENS - 840 D main spindle bore: 115 mmexternal spindle dia. in forward position: 160 mmCNC Turning- and Milling Center | HEYLIGENSTAEDT - HEYNUMAT 5 UK / 1500 equipped with a turret for driven tools as well as travelling lynette and tailstock.Additional equipment:- Centering points,- Jaw sets,- Clamping jaws,- 3 jaw chuck,A machine video from the production plant will be shared on request.The machine is in a well-maintained condition.Please refer to further technical details in the attachement of the offer.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: Heynumat 5 U | Heynumat 5-U | Heynumat 5 U 1500The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 340 mmturning length: 575 mmswing dia.: 500 mmX-Axis movement: 215 mmY-Axis movement: 100 mmZ-Axis movement: 605 mmMinimum indexing C-Axis main Spindle: 0,0001 °Number of tools on turret: 12 Number of driven tools: 12 xSpindle speed driven tools: 4500 1/minSpindle motor driven tools: 5,5 / 3,7 kWTool type: Mazak VDI control: Mazatrol Smooth G Main Spindle:: Spindle Speed: 5000 1/minspindle motor: 15/11 kWspindle bore diameter: 76 mmbar capacity: 65 mm2nd Spindle:: spindle turning speed range: 6000 U/minspindle motor: 7,5 kWspindle bore: 53 mmspindle distance: 575 mmtotal power requirement: 26,9 kVAWeight: 4,8 tdimensions of the machine ca.: 2,7 x 1,7 x 1,75 m- Mazatrol SmoothG CNC control- Main and counter spindle- 12-station tool turret with driven tools and Y-axis-- Turning Speed: 4500 U/min, 5,5kW- 3-jaw chuck-- Main: 8-- Counter: 6- Chip conveyor- Coolant system- ...

turning diameter over bed: 297 mmturning diameter over bed slide: 160 turning length: 500 mmshort taper holder: Größe 5 spindle bore: 36 mmspindle turning speed range: 30-3550 U/minnumber of speeds: 18 quill adjustment: 90 mmtailstock quill taper MT: 3 cross adjustment: +15 tailstock adjustment - manual: 500 mmtotal power requirement: kWweight of the machine ca.: 610 kgdimensions of the machine ca.: 1,4 x 0,7 x 1,2 mwedge bar chuck Forkardt: Ø 160 mmAccessories:Forkardt V-block chuck, Ø 160 mmCollet chuck,Collets,Steel Multifix system, size Awith 3 quick-change insertsIntegrated center pointChip guardThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

dönüş çapı: 340 mm dönüş uzunluğu: 1000 mmkontrol: Mazatrol SmoothC toplam güç gereksinimi: makinenin kW ağırlığı ca.: makinenin boyutları ca.: mBu reklam için veriler, LogoTech oHG'nin yazılım çözümü olan ModulMWS ile oluşturulmuştur.

Ön plaka çapı: 4500 mm sallanma çapı: 5000 mm dönme yüksekliği: 2500 mm iş parçası ağırlığı max.: 63 tno. Sürgü sayısı: 2 maksimum. ram strok: 1600 mm ön plaka dönüş hızı aralığı: 0,3 - 32 U/minAnzahl der Drehzahlstufen: 4 toplam güç gereksinimi: 130 kW makinenin ağırlığı ca.: 145 tboyut çapı: 6,6 x 11,4 x 8,4 m- DRO- 2 dönebilir Ram (-15 / +40)Bu reklamın verileri, LogoTech oHG'nin yazılım çözümü olan ModulMWS ile oluşturulmuştur.

greates pass round over bed: 350 mmswing diameter over face slide: 200 mmcentre distance: 800 mmcentre height: 175 mmturning length: 700 mm3-jaw chuck: Röhm Ø 160 spindle bore: 46 mmspindle head: Gr. 5, DIN55027 number of spindle speeds: 18 spindle turning speed range: 31,5-2500 U/mintailstock quill taper MT: 3 weight of the machine ca.: 1000 kg3-axis digital readoutmanual includedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0554 mm: 370 mm: 3000 mm: 280 mm: 104 mm: 11 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 400 mmturning diameter over slide rest: 260 mmturning length: 1500 mmturning diameter in the gap: 570 mmturning speeds: 45 - 1800 U/mincentre height: 210 mmspindle bore: 52 mmtailstock quill taper MT: 4 MKconnected load frequency: 400 Vtotal power requirement: 3,5 kWweight of the machine ca.: 1,5 tdimensions of the machine ca.: 2,6 x 1,1 x 1,7 mProfessional industrial machinedigital display3-jaw chuck 200 mm.4-jaw chuck 200 mm.Faceplate 280mmBezel fixedBezel rotatingMultifix steel holder.Machine lightFoot brakeremovable chip tray, chip protection wallHardened and ground bed railsComplete coolant systemFeed protectionMachine feetMachine toolThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.