torna kullanılmış satılık (3,111)

turning diameter: 400 mmswing diameter: 420 mmx-travel: 850 mmz-travel: 315 mmspindle head DIN 55026 - Size: 11 spindle bearing diameter: 140 mmturning speeds: max. 4000 U/mintool turret 12 times: C5 Captorapid traverse x + z axis: 45 / 30 m/minfeeding force: 11 kNtotal power requirement: 58 kWweight of the machine ca.: 9 tdimensions of the machine ca.: 9,5 x 4,5 x 3 mHard turningDry machiningChip conveyorPromot Portal and CellmasterNo clamping device availableNo tools availableno Cellmaster accessories availableThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Merkez genişliği: 1000 mm, yatak/krank/araba üzerinde dönüş çapı: 360 mm/510 mm/205 mm, iş mili deliği: 42 mm, hız: 2100 rpm, makine boyutları X / Y / Z: yaklaşık 1950 mm / 900 mm / 1350 mm, ağırlık: yaklaşık 750 kg. Yerinde inceleme mümkündür.

turning diameter over bed: 350 mmturning diameter over slide rest: 310 mmturning length: 700 mmtotal power requirement: 4,6 kWweight of the machine ca.: 1,0 tDimensions (HxWxD): 2.200 x 1.300 x 1.175 mm--> Technical data Centre height: 175 mm--> Centre width: 800 mm--> Swing diameter over bed: 350 mm--> Swing diameter over support: 310 mm--> Gap length in front of the faceplate: 145 mm--> Cross slide travel: 205 mm--> Top slide travel: 100 mm--> Tool cross-section: 20x20 mm--> Bed Width: 220 mm--> Height: 300 mm--> Headstock Spindle bore: 46 mm--> Spindle nose: DIN 55027-5--> Spindle inner taper: 1:20--> Tool holder: MK-3--> Spindle speeds: 18--> Speed range: 25 - 2000 rpm--> Tailstock Quill diameter: 50 mm--> Quill inner taper: MK-3--> Quill travel: 140 mm--> Lateral adjustment: 10 mm--> Feed range Number of feeds: 256--> Longitudinal feeds (128): 0.042 - 0.929 mm Rev--> Cross feed ...

turning diameter over bed: 330 mmturning diameter over slide rest: 190 mmcentre distance: 650 mmturning length: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m3-jaw chucktool holder devicetail stock Technische Daten / technical details:Spitzenweite / center to center 650 mmDreh-Ø über Bett / turning diameter over bed 330 mmDreh-Ø über Schlitten / turning diameter over sledge 190 mmSpindelbohrung / spindle hole 36 mmDrehzahlbereich / spindle speed 30-2500 UpM /rpmAntriebsleistung / drive capacity 2,2 kWGewicht der Maschine ca. / weight ca. 600 kgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -Technical data, accessories and description of the machine are not binding.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bir DMT torna tezgahı mevcuttur. Merkez mesafesi: 1000 mm, yatak / yüz kaydırağı üzerinde salıncak çapı: 420 mm / 210 mm, yatak yüksekliği: 340 mm, mil deliği: 64 mm, mil çapı: 115 mm, hız: 4000 rpm, tüy çapı: 60 mm, tüy vuruşu: 140 mm, yüz kızağı genişliği: 210 mm, yüz kızağı uzunluğu: 640 mm. Makine boyutları X/Y/Z: yaklaşık 2150mm/1150mm/1700mm, ağırlık: yaklaşık 1800kg, kontrol: Heidenhain, çalışma saatleri: yaklaşık 300h. Belgeler mevcut. Yerinde inceleme mümkündür.

An Emag vertical CNC lathe is available. Clamping chuck diameter: 250mm, max. circulation diameter: 270mm, max. machining diameter: 250mm, max. machining length: 175mm, speed: 4500rpm, tool positions: 12, tool holder: VDI 40, travel X/Z: 660mm/300mm, rapid traverse X/Z: 60m/30m/min. Machine dimensions X/Y/Z: approx. 4300mm/1600mm/3300mm, weight: approx. 7500kg, control: Fanuc Series 32i-Model A, operating hours: 64137h. Including automatic loading and unloading with pick-up spindle and integrated part diverter and workpiece storage. Documentation available. On-site inspection is possible.

faceplate diameter: 2650 mmturning diameter over slide rest: 2800 mmturning diameter over plate: 3200 mmturning length: 10000 mmupper slide-adjustment: 250 mmspindle diameter in front bearing: 400 mmspindle turning speed range: 0,35 -1,12 / 1,2 - 56 U/minfeed: 0,05 - 18 mm/Uworkpiece weight: 9000 kgspindle motor: 60 kWmax. workpiece weight between centres: 20000 kgControl: total power requirement: - kWweight of the machine ca.: 93 tdimensions of the machine ca.: m- CNC control NUM 1060- 4-jaw face plate- Steel holder device- Tailstock- Base plate- Roller setting vice- Transverse travel of the top slide: 425 mm- Longitudinal displacement of the main slide in the centre section: 150 mm- Transverse displacement of the centre section on the lower section: 700mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Uç genişliği: 430mm Uç Yüksekliği: 120mm Mil deliği: 23mm İş mili hızları: 60-3000 RPM Kısa konik iş mili kafası DIN 4 Punta MK2 0,03 ila 2,5 mm arasında beslenir Ağırlık yaklaşık 360 kg Yeni Aikron 3 eksenli dijital gösterge, iş mili motorunun freni yenilendi, teknik olarak kontrol edildi. Aksesuarlar: Pens cihazı, torna aynası Hızlı değiştirilebilen çelik tutucu 

: 0460 mm: 270 mm: 1500 mm: 230 mm: 76 mm: 11 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

dönüş çapı: 720 mmtornalama uzunluğu: 3.000 mmkontrol: FAGOR 8055 TC/B yatak üzerinde dönüş çapı: 470 mmmil çapı: 92 mmmil burnu: DIN-55027-11 mil çapı: 150 mmiş mili tahriki: 17 / 20,5 kWtoplam güç gereksinimi: 28 kWmakinenin ağırlığı ca.: 5,7 tmakinenin boyutları ca.: mBu reklamın verileri, LogoTech oHG'nin yazılım çözümü olan ModulMWS ile oluşturulmuştur.

Key data: 210 mm, 305 mm, 5000 1/min

CNC Torna Tezgahı Yapmak: Gildemeister Modeli: CTX 200 Kontrol: Heidenhain Pilot 1190 Üretim tarihi 1996 Açma saatleri: yaklaşık 38.000 saat Özellikler Yatak üzerinde çevresel çap 440 mm Taşıyıcı üzerinde çevresel çap 210 mm Dönüş uzunluğu 305 mm Çubuk geçişi 42 mm Hız 5000 rpm Taret 12 istasyon Takım tutucu 20 VDI Makine boyutları U x G x Y 2800 x 1651 x 1771 mm Makine ağırlığı yaklaşık 3000 kg Aksesuar -lar: Çeşitli takım tutucular Ana iş mili üzerinde pens aynası Punta Belge

Kontrol Fanuc 21T Dönüş çapı 158 mm Yatak üzerinde çevresel çap 340 mm Hız: 6.000 dak-1 8 vitesli tabanca Punta 3 çeneli ayna, 2 çeneli ayna, pens aynası Pensetler Çok yönlü takım tutucular

A Gildemeister CNC double-spindle turning and milling center including coolant system and chip conveyor is available. Turning diameter over bed: 640mm, machining diameter: 400mm, center distance: 1930mm, travel X/Z: 550mm/1585mm, travel Y: +/-110mm, B-axis: +/-120° (interpolating), C-axis: 360°. Main spindle: power: 36kW/45kW, speed: 4000rpm, torque: 600Nm-730Nm, bore: 107mm. Milling spindle: Speed: 12000rpm, power: 13.2kW/22kW, torque: 100Nm. Tool places: 60, carrier: turret 12-fold star SW 380, machine dimensions X/Y/Z: approx. 9300mm/4600mm/3100mm, weight: approx. 20000kg, control: Siemens Sinumerik 840D powerline. Documentation available. On-site inspection is possible.

Üç adet Okuma CNC yatay torna tezgahı mevcuttur. 1) Okuma LB 15 M. 2) Okuma LB 15. 3) Okuma LB 15 W. Okuma LB 15 W arızalı. Yerinde inceleme mümkündür. Bireysel satış mümkündür.

turning diameter over bed: 420 mmturning diameter over slide rest: 290 mmturning length: 900 mmturning diameter in the gap: mmturning speeds: 40 - 2000 U/mincentre height: 210 mmspindle bore: 38 mmtotal power requirement: 4,0 KWweight of the machine ca.: 0,9 tdimensions of the machine ca.: 2,4 x 1,1 x 1,3 mLead and feed spindle lathe- 3-jaw chuck 220mm- Quick-change tool holder with 5 cassettes- Steady rest- Chip tray- Operating instructionsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 570 mmturning length: 2000 mmcontrol: total power requirement: 15 kWweight of the machine ca.: 3,5 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 410 mmturning diameter over slide rest: 240 mmturning length: 1000 mmturning diameter in the gap: 530 mmturning speeds: 65 - 1810 U/mincentre height: 205 mmspindle bore: 52 mmtailstock quill taper MT: 4 total power requirement: 2,2 kWweight of the machine ca.: 0,9 tdimensions of the machine ca.: 1,9 x 0,8 x 1,3 mCenter lathe with: 3-axis digital measuring system fully assembled electromagnetic main spindle brake auto. Feed in longitudinal and transverse direction safety relay Micrometer end stop coolant device 3-jaw lathe chuck with 1 set of turning and drilling jaws German operating instructions.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 400 mmturning diameter over slide rest: 264 mmturning length: 1000 mmturning diameter in the gap: 550 mmturning speeds: 44 - 2000 U/mincentre height: 200 mmspindle bore: 52 mmtailstock quill taper MT: 4 MKconnected load frequency: 400 Vtotal power requirement: 1,5 / 2,4 kWweight of the machine ca.: 0,9 tdimensions of the machine ca.: 1,9 x 0,8 x 1,56 m3-axis digital display3-jaw chuck 200 mm.4-jaw chuck 200 mm.Faceplate 320mmbezel fixedrunning bezel4-fold steel holder.Halogen machine lightmachine lightfoot brakeremovable chip tray, chip protection wallHardened and ground bed tracksComplete coolant systemlining protectionmachine toolsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

İki işleme modülü ile, X ekseni: -50 ila 725 mm, Y ekseni: -200 ila 300/ -250 ila 250 mm, hızlı travers X-, Y-, Z ekseni: 18/12/30m/dak, tornalama uzunlukları: 1500/2000/2500/3200/4000/4500/6500mm, dönüş çapı: 780/ 880mm, torna mili deliği: 92/123mm, ana iş mili hız aralığı: 0-3000/0-3000/2000/dak, maks. Tornalama/freze ünitesi hızı: 5000/6000/10000/dak, maks. takım uzunluğu: 900/600/1000/300 / 900mm, tüy stroku: 160 / 170mm, bağlı yük: 102kVA, kontrol sistemi: SINUMERIK ONE / SINUMERIK 840D sl, tahrik sistemi kontrolü: SINAMICS S120, ağırlık: 17t. Yerinde inceleme mümkündür.

Bir Pinacho CNC hassas paralel torna tezgahı mevcuttur. Merkez yüksekliği: 180 mm, merkez genişliği: 750 mm-1000 mm, kılavuz yatağı üzerinde dönüş çapı / uzunlamasına kızak / çapraz kızak: 360 mm / 335 mm / 198 mm, yatak genişliği: 250 mm, delik: 42 mm, hız: 4000 rpm, besleme X / Z: 10m / dak, hızlı travers X / Z: 10m / dak. Punta şaft çapı: 58 mm, punta şaft uzunluğu: 200 mm, Mors konik: MK3, min. hareketli/sabit sabit dinlenme hareketi: 10 mm, maks. hareketli/sabit sabit dinlenme hareketi: 70 mm/114 mm, kontrol: Fanuc 0i. Belgeler mevcut. Yerinde inceleme mümkündür

Yatak / yüz kızağı üzerinde dönüş çapı: 360mm / 160mm, merkez mesafesi: 800mm, hareket X / Z: 205mm / 810mm, hız: 3150rpm, iş mili deliği: 60mm, takım pozisyonları: 8, hızlı travers X / Z: 10m / dak. Makine boyutları X/Y/Z: yaklaşık 3300mm/1800mm/1800mm, ağırlık: yaklaşık 3300kg, kontrol: Traub System TX-8. Yerinde inceleme mümkündür.

turning diameter over bed: 250 mmturning diameter over slide rest: 145 mmturning length: 550 mmcenter height over bed: 125 mmcentre distance: 550 mmbed width: 135 mmspindle bore: 26 mmturning speed range - stepless: 50 - 2.000 U/minpower requirement: 750 W3-jaw-chuck diameter: 125 mmtaper in tailstock-quill: MK 2 dia. of quill: 30 mmquill stroke: 70 mmvoltage: 230 Vweight of the machine ca.: 120 kgdimensions of the machine ca.: 1,25 x 0,60 x 0,50 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpice diameter max.: 90 mmforward bearing diameter: 140 mmTurning speeds mainspindle: 4.200 U/minPower: 35,5 KWControl: INDEX C 200-4 travel -x axis: 1.500 mmtravel -z axis: 340 mmtravel -y axis: 180 mmb-axis: 360 °CNC turning and milling center vertical | INDEX - V300 equipped with a turret for driven tools as well as y- + B- axis.Further information:- direct measuring system on X + ZThe machine is in good condition.For additional equipment information please refer to the original order confirmation which is included in the offer of this machine.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: V-300 | V 300The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0390 mm: 240 mm: 1250 mm: 190 mm: 54 mm: 5,5 kw

Circulation/rotation Ø over bed: 475 mmRotation/rotation Ø via cross slide: 260 mmSledge path plan: 260 mmcentre distance: 1000 / 1500 / 2000 mmpower capacity: 22 kWGear stages. m= manual / e= electric.: 2 e Spindle head DIN 55026 / DIN 55027: A6 / 6 Spindle Ø in front bearing: 115 mmspindle bore: 78 / 70 mmturning speed range (V-constant): 1 - 3.000 U/minfeed range flat: 1µ - 1.000 mm/Ufeed range lengthwise and thread: 1µ - 2.000 mm/URapid traverse plan/longitudinal: 5 / 10 m/mindiameter of quill: 70 mmquill travel: 120 mmquill inner cone: 5 MKThis machine is used for the production of individual parts and small batches from simple to the most complex contours.It is characterised by:--> Ease of operation Precision Working range

: 0400 mm: 1250 mm: : 200 mm: 80 mm: 315 mm: 2700 U/min : D1-8 DIN 55029 : 73 mm: 140 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number of spindles: 8 bar capacity: 36 mmcontrol: FANUC 30i-B Subspindle speed: 7.500 U/minBar Automatic Lathe - Multi Spindle | DMG GILDEMEISTER - MULTISPRINT 36 equipped with bar feeder and a coolant system.The machine only has 15.666h spindle hours.The machine is in a well-maintained condition and can be inspected under power.For additional equipment information please refer to the original order confirmation which is included in the offer of this machine.The machine works with a EGS loading system ->This can be purchased separatelyAn extensive tool package is included.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: MULTISPRINT36 | MULTISPRINT-36The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Merkez yüksekliği: 102 mmMerkez mesafesi: 450 mmMil deliği: 25 mmMil hızı:: 220 - 2600 Makinenin ağırlığı ca.: TMakinenin boyutları ca.: mAksesuarların eksiksiz olup olmadığıkontrol edilmedi Dolaplar teslimat kapsamına dahil değildir

number of spindles: 8 bar capacity: 36 mmcontrol: FANUC 30i-B Subspindle speed: 7.500 U/minBar Automatic Lathe - Multi Spindle | DMG GILDEMEISTER - MULTISPRINT 36 equipped with bar feeder and a coolant system.The machine only has 6.944h spindle hours.The machine is in a well-maintained condition and can be inspected under power.For additional equipment information please refer to the original order confirmation which is included in the offer of this machine.The machine works with a EGS loading system ->This can be purchased separatelyAn extensive tool package is included.The machine video from the production plant will be shared on request.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: MULTISPRINT36 | MULTISPRINT-36The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number of spindles: 8 bar capacity: 36 mmcontrol: FANUC 30i-B Subspindle speed: 7.500 U/minBar Automatic Lathe - Multi Spindle | DMG GILDEMEISTER - MULTISPRINT 36 equipped with bar feeder and a coolant system.The machine only has 15.650h spindle hours.The machine is in a well-maintained condition and can be inspected under power.For additional equipment information please refer to the original order confirmation which is included in the offer of this machine.The machine works with a EGS loading system ->This can be purchased separatelyAn extensive tool package is included.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: MULTISPRINT36 | MULTISPRINT-36The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.