torna kullanılmış satılık (3,074)

Offered 250mm. Feed steps: 12. Cross-bed feed: 0.05-3mm/rev. Carriage and rotating section feed: 0.04-2.5mm/rev. Feed motor speed: 1000rpm. Feed motor power: 2.2kW. Permissible workpiece weight, cantilevered with a center of gravity distance of 300mm: approx. 5000kg. Permissible workpiece weight between centers, without additional support: 20000kg. Equipped with a large faceplate with clamping devices, cross-bed support, movable tool slide and mechanical lever controls. Inspection possible by arrangement.

Offered is a facing lathe with a large faceplate. Swing diameter over foundation plates: 2480mm. Center height above foundation plates: 1250mm. Faceplate diameter: 1600mm. Maximum faceplate torque: 14000Nm. Main spindle bore: 100mm. Front main spindle bearing diameter: 240mm. Turning tool shank cross-section: 50 × 50mm. Equipped with four chuck jaws, movable bed-mounted carriage, cross slide, tool holder, mechanical control levers and handwheels.

This 8-axis EMCO Hyperturn 45 was manufactured in 2018. It features dual water-cooled integrated motor spindles with a maximum bar capacity of 45 mm and a powerful drive power of 15 kW for each spindle. The machine includes two 12-station radial tool turrets and a high-pressure coolant system. If you are looking to get high-quality turning and milling capabilities, consider the EMCO Hyperturn 45 turn-mill centre we have for sale. Contact us for further details.

This SPINNER TTS 42 Lathe was manufactured in the year 2020 in Germany and has 25585 production hours. It is equipped with a Fanuc Series 31i-MODEL B control unit. The machine has a spindle speed of 7000 rpm. See tech specs file as PDF (German) attached for more details.

This 9-axis TSUGAMI HS327 swiss type turning machine was manufactured in 2017. It features a maximum machining diameter of 32 mm and includes a main spindle with 8 positions for turning tools. The machine has been completely overhauled in 2022, ensuring optimal performance. If you are looking to get high-quality turning capabilities, consider the TSUGAMI HS327 machine we have for sale. Contact us for further details.

Key data: 320 mm, 800 mm

Baujahr: 2017 CNC-Steuerung: Fanuc FS31iB (MAPPS IVS) Fähigkeiten Drehlänge mm: 800 Max. Drehdurchmesser mm: ø 320 Stangenarbeitskapazität mm: 65 Obere Tabancası Verfahrweg X-Achse mm: 210 Verfahrweg Y-Achse mm: 110 Verfahrweg Z-Achse mm: 810 Anzahl werkzeugplätze: 16 Drehzahl max. angetriebene Werkzeuge U/min: 6000 Untere Revolverturm Verfahrweg X-Achse mm: 210 Verfahrweg Y-Achse mm: 810 Anzahl werkzeugplätze: 16 Drehzahl max. angetriebene Werkzeuge U/min: 6000 Hauptspindel Max. Spindeldrehzahl U/min: 5000 Spindelantriebssleistung kW: 25/22 Spindelbohrung mm: 73 Spannfuttertyp: 8 inç Hersteller: KITAGAWA Gegenspindel Max. Spindeldrehzahl U/min: 5000 Spindelantriebssleistung kW: 25/22 Spindelbohrung mm: 73 Spannfuttertyp: 8 inç Hersteller: KITAGAWA Kühlsystem Hochdruckkühlung bar: 10 Ausrüstung Späneförderer Nebelabscheider Futterfußschalt ...

EMCO HYPERTURN 665MCPLUS C/Y eksenli dönüş merkezi Portal yükleme sistemi ve bar yükleme şarjörü Tamamen tek bir kelepçede torna-frezeleme işlemesi İnşaat yılı 2003 Control SIEMENS SINUMERIK 840D Ekipman: 20 temel paletli portal yükleme sistemi otomatik çubuk yüklemeli şarjör IEMCA tipi MASTER 880 MP üretir Her biri yaklaşık 12 istasyondan oluşan 2 alet tareti C eksenli ana mil C eksenli alt mil Chip konveyörü KNOLL yap Soğutma ünitesi KELVIO yapımı Teslimatta dahil: VDI Kayıtları Elektrikli aletler Takım dolabı Çekmece dolabı Çalışma Talimatları/Dokümantasyonu Depolama ortamındaki makine parametreleri Teknik veriler ve ekipman – PDF ile bakınız. Tüm teknik bilgiler, illüstrasyonlar ve içerikler bağlayıcı değildir ve garantisizdir. Değişiklik ve hatalara açıktır. Fotoğraflarda ve videoda görülen  ...

DMG MORI CTX Beta 1250 TC 4AYear of manuf. : 2014 Control : Siemens 840 Dsl - Operate Turning diam. : 340 mmTurning length : 1185 mm____________Description:In General:Year of manufacture:2014Control system:Siemens 840 Dsl - OperateSwivel diameter:540 mmTurning length:1,185 mmBar capacity:102 mmMain spindle:Technology:Direct drive spindleSpeed:4,000 rpmPower:48 kWTorque:680 NmBar capacity:102 mmC-axis:0.001°Chuck:Hainbuch Spanntop 100Hydraulic clamping:Differential pressure clampingClamping cylinder:Hollow Clamping CylinderCoolant supply:External (chuck flushing)Sub spindle:Technology:Direct drive spindleSpeed:4.000 rpmPower:48 kWTorque:680 NmC-axis:0.001°Chuck:Hainbuch Spanntop 65Hydraulic clamping:Differential pressure clamping:Clamping cylinder:Partially Hollow Clamping Cylinder 848 mmCoolant supply:External and internalTailstock function:Mechatronic control of the sub spindleT ...

Swing diameter over bed: 560mm, swing diameter over cross slide: 320mm, spindle speed: 900rpm, machine has surface rust, not operational, an on-site inspection is possible, not connected to power.

Offered is a single-column vertical turret lathe with tool turret. Equipped with a large rotary table with radial clamping slots, clamping brackets, vertical tool slide with turret head, digital position readout, work light and separate control panel. Inspection possible by arrangement.

X-axis travel: 220mm, Z-axis travel: 635mm, swing diameter over bedway cover: 570mm, swing diameter over cross-slide cover: 420mm, main spindle nose diameter: 170mm h5, main spindle diameter at front bearing: 120mm, main spindle bore: 79mm, drive power at 100% duty cycle: 21kW, max. torque: 240Nm, spindle speed range: 25-5,000rpm, C-axis speed: 100rpm, holding torque: 200Nm, counter spindle nose diameter: 120mm h5, counter spindle diameter at front bearing: 90mm, spindle bore: 56mm, chuck diameter: 140mm, drive power at 100% duty cycle: 9kW, max. torque: 72Nm, spindle speed range: 25-5,000rpm, travel: 575mm, rapid traverse speed: 24m/min, Z-axis feed force: 7kN, X-axis feed force: 3.5kN, X-axis rapid traverse speed: 20m/min, Z-axis rapid traverse speed: 24m/min, X/Z ball screw dimensions: 32x10mm, length: 3565mm, width: 1700mm, height: 1700mm, weight: 4.7t, operating hours: 79,630h, the  ...

A conventional center lathe is offered. Equipped with manual gear and feed selection, saddle, cross slide and compound slide, tool holder, tailstock with handwheel, rear splash guard, machine light and machine stand with chip pan. Inspection possible by arrangement.

Center height: 1132mm, max. machining diameter: 16mm, max. turning length without reclamping: 200mm, spindle bore: 20mm, main spindle speed: 10,000rpm, main spindle positioning accuracy: 0.001°, main spindle drive power: 2.2kW, max. sub-spindle machining diameter: 16mm, sub-spindle speed: 10,000rpm, sub-spindle positioning accuracy: 0.001°, sub-spindle drive power: 0.75kW, driven tools on vertical tool holder, speed: 8,000rpm, drive power: 0.75kW, number of tools: 4, driven tools on turret, speed: 6,500rpm, drive power: 0.75kW, number of stations: 10, number of tools: 5, clamping sleeve diameter: 19.05mm, turning tool shank cross-section: 10mm, main/sub-spindle collets: F20 (138E), drilling collets: ER 11, rapid traverse speed on all axes: 20m/min, connected load: 6kVA, control system: Mitsubishi Meldas 635, length: 2450mm, width: 1170mm, height: 1700mm, weight: 2.55t, including FMB Mi ...

Max. bar capacity: 13mm, max. turning length: 130mm, connected load: 18kW, control system: TRAUB SYSTEM TX8i-s, including FMB Minimag 3200 bar feeder. Machine is fully functional, no known technical defects. An on-site inspection is possible.

Ref. -No.: 10673Manufacturer: COLCHESTERType of control: KonventionellStorage location: HalberstadtCountry of origin: EnglandX stroke: 500 mmY stroke: 400 mmZ - stroke: 400 mmFeed rate: 5.000 mm / minTool places: 16 Weight Of The Machine Ca.: 3.000 tFurther information:The machine is offered including all available accessories and technical documentation.The machine has been cleaned, is fully operational and can be inspected under power by prior appointment.

faceplate diameter: 820 mmswing diameter: 1100 mmturning height: 850 mmturning diameter: 950 mmcontrol: Fanuc 0i-TF control numbers of positions in the tool changer: 16 spindle motor: 30 / 22 kWspindle turning speed range: 800 U/minLive Tools: speeds of tool: 3000 U/mintotal power requirement: kWweight of the machine ca.: 15 tdimensions of the machine ca.: mVertical CNC lathe- CNC control Fanuc 0i-TF control- NC rotary table (800 mm) 3-JAW SEOAM (CAS-32) HYDRAULIC CHUCK- Tool turret 12-fold BMT 65- Tool Changer 16-fold- live tool holders (3)- Coolant system- Tool Presetter- Chip ConveyorThe machine has only approx. 1.100 H operating hours.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Kollet Kurulumu - Collets - Matkap Tailstock

Key data: 140 mm, 250 mm, 3000 U/min

İyi korunmuş hassas torna makinesi ve kapsamlı ekipman

Mazak Hızlı 8. tur torna tezgahı, bar besleyici ile

Ref. -No.: 10716Manufacturer: DMG MORIYear of construction: 2015Type of control: CNCControl: Siemens 840DStorage location: HalberstadtCountry of origin: GermanyMachine-No.: 004xxxxxxx Tool holder type: VDI 30 X stroke: 260 mmZ - stroke: 550 mmBar passage: 65 mmTurning Diameter: 500 mmTurning Length: 520 mmSpindle Speeds: 5.000 RPMSpindle Bore: 76 mmTool changer: 12 PcsOperating hours: 38.500 HoursWeight Of The Machine Ca.: 4.8 tFurther information:Including chip conveyor, transport securing equipment, documentation and accessories.The machine has been cleaned and can be inspected under power.

Ref. -No.: 10718Manufacturer: REIDENYear of construction: 2013Type of control: CNCControl: Siemens Sinumerik 840 DStorage location: HalberstadtCountry of origin: SchweizMachine-No.: 40-xxx Turning Speeds: 16.000 RPMX stroke: 1.000 mmY stroke: 1.100 mmZ - stroke: 810 mmC-Axis: 360° Spindle power: 38 kWTool Taper: HSK 63 Max. Rapid traverse: 60 m / minFurther information:The machine is offered including all available accessories and technical documentation.The machine has been cleaned, is fully operational and can be inspected under power by prior appointment.

Horizontal turning machine manufactured in 2015. This Challenger BNC-1840 (Microturn series) features a robust Fagor CNC control with a manual/power chuck and a disc turret tooling system. It has a machine weight of 3000 kg and is equipped with dual manual electronic handwheels for precise control. If you are looking to get high-quality turning capabilities, consider the Challenger BNC-1840 machine we have for sale. Contact us for further details.

CNC kontrolörü: Mitsubishi M-720BM (MAPPS 2) Kapasite X ekseni hareketi mm: 260 Z eksenli hareket mm: 520 C ekseni: 360º (0.001) Tur uzunluğu mm: 515 Maksimum dönüş çapı mm: ø: 356 Üst kule Takım tutucu: 12 Ana mil Hız mil rpm: 5000 Sürüş gücü milinin kW: 15/11 Mil çapı mm: 73 Üretici: KITAGAWA Karşı mil Karşı mil hareketi mm: 525 Ekipman Çip konveyörü Sinyal lambası Alet ölçüm kolu Çalışma alanı ışığı Bar besleyici için arayüz Çalışma saatleri Güç altında: 7.456 Kesme Süresi: 5.423 Temel makine boyutları / ağırlık Uzunluk mm: 3.495 Genişlik mm: 2.050 Boy mm: 2.230 Kilo kg: 5.800

CNC torna Okuma LB 400-M Kontrol: OSP-E100L Yapım Yılı: 2005 Dahili makine hayır. 83 Turlama uzunluğu: 1.250 mm Turlama çapı: 620 mm Hız: 3.500 rpm. Araç tareti: 12 yer (sürülmeli) Takım tutucu: VDI 40 Mil deliği: yaklaşık 110 mm 3 çeneli çakan Kitagawa B15 Ekipman: - Yonga konveyörleri - Soğutma sıvısı cihazı - Touchsetter - Kuyruk kısm�

Üretici: POREBA Model No.: TPK-90N CNC kontrolü: SIEMENS Tur uzunluğu / merkezler arasındaki mesafe: 2000 mm Yatak üzerindeki sallantı: yaklaşık. 930 mm Salınım üzerinden araba: yaklaşık. 630 mm Boşlukta sallanma: yaklaşır. 1200 mm Mil çapı: yaklaşık. 95 mm Maksimum mil hızı: 800 rpm'ye kadar Ana motor gücü: yaklaşık. 22 kW Tailstock konik: Morse 6 Ana özellikler: SIEMENS CNC kontrolü, ağır ve son derece sert makine yapımı, Yaklaşık olarak büyük yatak üzerindeki sallancak. 930 mm, 2000 mm dönüş uzunluğu, büyük ve ağır iş parçalarının işlenilmesine uygun olanlar, POREBA ağır hizmet endüstriyel torna makinelerinin kanıtlanmış tasarımı.

Equipment: tailstock with handwheel, compound slide, cross slide, longitudinal carriage with apron, machine light, integrated machine stand, tool holder. Inspection possible by appointment.

Offered is a CNC turning center with automated robot loading. Workpiece feeding: Ball blanks under 120mm via rod chute, larger ball blanks via a separate singulation system at the CNC machine. Operating hours: approx. 68000h. Control system: FANUC 31i-A. Robot controller: FANUC R-30iA. Equipped with: Main spindle and counter spindle, tool turret, FANUC M-16iB 6-axis industrial robot, automated workpiece feeding, raw part hopper, rod chute for ball blanks under 120mm, separate workpiece singulation system for larger ball blanks, chip conveyor, protective enclosure for the robot cell as well as electrical documentation and circuit diagrams. Repairs carried out: 2025: New feed screw with bearing, 2021: New vacuum pump on the cooling unit, 2018: New CPU for the FANUC robot. Inspection possible by arrangement.

Ref. -No.: 10026Manufacturer: SCHIESSYear of construction: 2009Type of control: CNC-SteuerungControl: Siemens Sinumerik 840 DStorage location: HalberstadtCountry of origin: DeutschlandTurning Diameter: 5000 mmTurning Diameter Over Bed: 4000 mmSpindle Speeds: 0 - 120 RPMClamping Diameter: 4000 mmCross Travel: 420 x 340 mmMax workpiece height: 3000 mmMain Drive: 52 kWMax. Tension: 120000 NMax. Payload: 50 tPower Capacity - Table: 110 kWMax torque faceplate: 100 kNmFurther information:Automatic tool changer with 80 positions(AAC) Automatic attachment changer for 6 milling headsLive spindleC-axis tableTravel of the Y-axis gantry columnsDrilling and milling head (master head principle)Straight drilling and milling head GB-1BRenishaw RBP 60 touch probeHand terminalTeleserviceInternal and external coolantOperator cabinChip conveyorSADDLE (X-AXIS):Horizontal movement from the center to the right ...

Ref. -No.: 10322Manufacturer: EKO PILLYear of construction: 2010Further information:The PMO 950K carousel jet washer is revolutionarymaintenance-free washer, extremely compact andaesthetic structure, designed for oil contamination,machining emulsions and loose chips from washed objects.Despite its minimized dimensions, it works perfectly togetherwith automated production lines for thorough washing,and optional rinsing and drying of moving partson the internal conveyor. Short distance between stationLoading and unloading facilities make it flexible.Washing, rinsing as well as drying operations take placein closed circuits, which significantly reduces costs- Gravity oil separator OGP- Fine filter EKO-PIL 20 µm- Vapor condenser with liquid regeneration- Drying heat recovery- Washing- Rinsing / Maintenance- Drying

Ref. -No.: 10421Manufacturer: SCHüTTEYear of construction: 2015Type of control: DigitalControl: DigitalStorage location: HalberstadtCountry of origin: GermanySerial no.: 3 Power consumption: 35 kWWeight Of The Machine Ca.: 6,6 t