taşlama makineleri ahşap çalışma kullanılmış satılık (643)

Pallet included Auction-ID: A1-47361-101

total power requirement:0,55 kwOverall size:800 x 900 x 1600 mmWeight:220 kgaccessories::mit Absaugung 0,2 kw

230V - 3000W 17.4A Speed 2840 rpm Complete with 8 new sanding belts. In working order. Auction-ID: A3-46152-6135

Number of sanding units: 4 Stsanding width: 190 mmSanding height max.: 4-180 mmweight: 4200 kgHess Expert 4-belt single wood sanding machinemachine will be checked by our technicians--------------------------------------Ø Grinding at the bottom/topØ With 2 offset grinding units each (bottom and top)Ø Grinding units (bottom and top) connected in series according to theDressing principleØ Pre-sanding with coarse grit (calibrate)Ø Regrinding with fine grit (finish)Ø Central motorized height adjustment of the lower grinding unitsØ Central motorized and synchronous height adjustment of the entire upperGrinding and brushing units including the upper transport unitsØ Oscillating sanding belt utilization (during the sanding process)Ø Absolute power connection thanks to 5.5 KW motors and large dimensionsdrive drumsØ Oxide ceramic grinding shoe for- exact surface geometry- no adjustment  ...

Feed width : 850 mm, Sanding belt size : 880 x 1900 mm, Year of manufacture : 1970, Machine type: wide belt sander, Electrical connection: 380 v / 50 HZ, Size : 1.20 x 1.50 x 2.10 m Auction-ID: A1-47358-102

230V - 3000W - 17.4A 2840 rpm In working order. Auction-ID: A3-46152-6134

Auction-ID: A1-48377-25

Center height: approx. 150 mmCenter length: approx. 800 mmReference: Hercegfi - Lot 112 Auction-ID: A7-49056-161

Technical data Manufacturer: F. Zimmermann GmbH, Denkendorf/Esslingen Type: PS 1/2 Machine Type: Vertical Belt Grinder Power: 1.35 kW Voltage: 380 V Frequency: 50 Hz Configuration Large work table with sanding belt feed-through Adjustable strap guides Control panel with switching levels I/II, left/right rotation, stop button and emergency stop Remarks The machine comes from a plant closure, was actively used in production until the end and was electrified. Auction-ID: A7-49302-24

Auction-ID: A1-49727-87

Number of sanding units: 2 st.sanding width: 180 mmSanding height max.: 150 mmMAWEG Robert Hildebrand Saturn DuoProfessional two-belt finish sanding machine with brushing unitDouble-sided, sands from top and bottomPneumatic belt oscillationPneumatic belt tensioningFeed via top and bottom conveyor belts with spring-loadedhold-down rollers, infinitely variable speed (5–15 m/min)Workpiece thickness adjustment with pre-selectable stock removal amount atmachine infeed, based on sensing the raw timber thicknessAdjustment to wood thickness via motorized positioning of themachines upper sectionDigital thickness setting via mechanical counter with 0.1 mm display andzero-point adjustmentSafety switch for oversized wood thickness at machine infeedDouble-sided brushing unit with integrated workpiece blow-offSanding belt blow-off (top and bottom)Belt breakage monitoring switch with automatic shutdo ...

Machine number: 7318Operating voltage: 380 VFrequency: 50 HzRated current: 15 AMagnet dimensions: 510 x 200 mmTable dimensions: 720 x 200 mmwith three groovesGrinding wheel diameter: 220 mmReference: Teck Tech - Lot 5 Auction-ID: A7-49056-174

ARMLÄNDER Polishing/Buffing Machine Auction-ID: A1-49712-15

ARMLÄNDER Polishing/Buffing Machine Auction-ID: A1-49712-2

MACRYL grinding/polishing machine type MAC 2.1 with large work table and separate control panel Including FEZER vacuum pump, vacuum accessories and connected extraction system Technical data Manufacturer: MACRYL / A. Wolf Maschinen GmbH Type: MAC 2.1 Engine No.: 611 24 Year of construction: approx. 1991 Electrical connection: approx. 380 V / 50 Hz Compressed air connection: approx. 6 bar Separate control panel Emergency stop Suction connection available Vacuum system available Machine dimensions (L × W × H): approx. 3,200 × 1,500 × 1,300 mm Weight: approx. 700–1,000 kg FEZER Vacuum Pump Manufacturer: FEZER Type: approx. 016-118 Vacuum: approx. 20 mbar Oil capacity: approx. 0.5 l Engine oil: SAE 30 Vacuum pressure gauge available Vacuum hoses available Auction-ID: A1-49712-10

Auction-ID: A1-48648-44

grinding length: 400 mmgrinding width: 300 mmworkpiece height: 375 mmelectro magnetic clamping plate: 400 x 250 mmgrinding wheel size: Ø 300 x 50 x 76,2 mmdressing device automatic: + Kompensation coolant tank: 210 ltotal power requirement: 12 kWweight of the machine ca.: 3 tdimensions of the machine ca.: 3,5 x 2 x 2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

\"1. Combination unit rubber roller with electric sanding shoe (function not tested) 2. Shoe power unit Cleaning brush incl. rigid sanding shoe for solid wood pulp Grinding width max.: 1100 mm Sanding belt dimensions: 2150x1130 mm Carpet feed speed: infinitely variable Sanding belt speeds per unit: 1 aggregate: 18 m/sec - 2 units: 2 speeds Roller table at the inlet and outlet incl. vacuum + vacuum blower Total connected load: 33.4 Kw SALE WITHOUT WARRANTY! Data are taken from the manufacturer's brochure/documents and may differ from the actual values. ATTENTION: it is expressly pointed out that this lot only corresponds to the scope of the product description. If objects can be seen in the photo that are not expressly listed in the lot description, they are not part of the sale. Of course, this also applies to tools, additional equipment, accessories, software ...

Operating voltage: 3 x 380 VFrequency: 50 HzNominal current: 25 AGrinding wheel diameter: approx. 250 mmMagnet dimensions: 600 x 300 mmincl. documentation and suitable machine accessoriesReference: Option - Lot 78 Auction-ID: A7-49056-115

Plant has already been partially dismantled Incl. 4 grinding wheels and magnetic table Auction-ID: A1-49674-59

Including control box (320x700x1140mm) Auction-ID: A1-41279-35

Hofftech Battery polisher eccentric 18V 2.0 Ah li-ion Auction-ID: A1-40896-1029

Auction-ID: A1-40896-255

HYUNDAI multi-sander - 220 W - palm sander delta - with dust collection box and 6 pieces of sandpaper Auction-ID: A1-40896-226

Milwaukee M18 BOS125-0 18V Li-Ion Battery Random Orbital Sander With the Milwaukee M18 BOS125-0 18V Li-Ion Battery random orbital sander, you have a cordless sander that steers pleasantly when sanding wood, metal, and painted parts. As a cordless random orbital sander, you can give any surface the right approach with six speed settings that suit coarse work and tight finishes. The motor delivers 14000 to 24000 sanding movements per minute so that you can continue faster and still keep control over the end result. Sandpaper is easy to change via the Velcro attachment and with 125mm sanding sole you work neatly along edges and on flat parts. During sanding, the dust box with filter keeps the dust in place better and with the vacuum adapter you can connect directly to Milwaukee vacuum cleaners. REDLINK electronics help with overload protection while REDLITHIUM battery technology is built fo ...

Drain pipe does not come along Auction-ID: A3-46147-2497

METABO K 100 industrial belt sander, designed for grinding, deburring and finishing operations in the mechanical workshop or in industrial production. This METABO model is a professional backstand for precise and efficient material removal, particularly used in the metalworking, locksmithing and boilermaking sectors. Thanks to its large tread size and its adapted speed, it offers an excellent compromise between power, precision and quality of finish. Ideal machine for: Machine shops Industrial maintenance Metal construction Preparation of parts before welding Deburring and finishing The METABO brand is recognized for the robustness and reliability of its professional equipment. Auction-ID: A1-48554-39

Bench-mounted industrial belt sander, ideal for grinding, deburring and finishing operations in mechanical workshops or metal fabrications. This type of machine, also known as a backstand or belt grinder, is widely used for metalworking, allowing for precise and fast material removal. The set is ready to be used as a complete workstation with a heavy-duty workbench, making it an ideal solution for: Mechanical workshops Boilermaking locksmith Industrial maintenance Production and manufacturing The vertical abrasive belt allows you to work efficiently on different types of workpieces, especially for deburring and preparation before welding. Auction-ID: A1-48554-37

Working width: 910 mmNumber of sanding units: 1 st.Workpiece thickness max.: 3 - 160 mmsanding belt measurements: 2.200 x 1.010 mmFeed motor: 0,55/0,75 kWFeed speed: 4,5 / 9 m/min.Weight: 1.210 kg: 18,5 m/secoutput: 11 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Auction-ID: A7-49302-53