torna kullanılmış satılık (3,050)

Yatak / çapraz kızak üzerinde dönüş çapı: 530mm / 280mm, merkez yüksekliği: 264mm, merkez genişliği: 2000mm, yatak genişliği: 370mm, hız: 2000rpm, mil deliği: 80mm, takım sapı boyutları X / Y: 25mm / 25mm, çapraz kızak hareketi: 300mm, tüy çapı: 65mm, tüy vuruşu: 180mm, tekrarlama doğruluğu: +/- 0.008mm. Makinenin alet kafasında bir elektrik sorunu var. Belgeler mevcut. Yerinde inceleme mümkündür.

dönüş çapı: 320 mmtornalama yüksekliği: 180 mmKontrol: SIEMENS 840 D ayna çapı: 315 mm0: 4.000 U/dak: 1.000 / 280 mmX ve Z yönünde hızlı güç hareketi: 60/30 m/dak12 çalışma pozisyonlu alet taret: VDI 50 toplam güç gereksinimi: 65 kWmakinenin ağırlığı ca.: 13,5 t makinenin boyutları ca.: 5,5 x 3,2 x 3,3 mBu reklamın verileri, LogoTech oHG'nin yazılım çözümü olan ModulMWS ile oluşturulmuştur.

İki işleme modülü ile, X ekseni: -50 ila 725 mm, Y ekseni: -200 ila 300/ -250 ila 250 mm, hızlı travers X-, Y-, Z ekseni: 18/12/30m/dak, tornalama uzunlukları: 1500/2000/2500/3200/4000/4500/6500mm, dönüş çapı: 780/ 880mm, torna mili deliği: 92/123mm, ana iş mili hız aralığı: 0-3000/0-3000/2000/dak, maks. Tornalama/freze ünitesi hızı: 5000/6000/10000/dak, maks. takım uzunluğu: 900/600/1000/300 / 900mm, tüy stroku: 160 / 170mm, bağlı yük: 102kVA, kontrol sistemi: SINUMERIK ONE / SINUMERIK 840D sl, tahrik sistemi kontrolü: SINAMICS S120, ağırlık: 17t. Yerinde inceleme mümkündür.

Bir Pinacho CNC hassas paralel torna tezgahı mevcuttur. Merkez yüksekliği: 180 mm, merkez genişliği: 750 mm-1000 mm, kılavuz yatağı üzerinde dönüş çapı / uzunlamasına kızak / çapraz kızak: 360 mm / 335 mm / 198 mm, yatak genişliği: 250 mm, delik: 42 mm, hız: 4000 rpm, besleme X / Z: 10m / dak, hızlı travers X / Z: 10m / dak. Punta şaft çapı: 58 mm, punta şaft uzunluğu: 200 mm, Mors konik: MK3, min. hareketli/sabit sabit dinlenme hareketi: 10 mm, maks. hareketli/sabit sabit dinlenme hareketi: 70 mm/114 mm, kontrol: Fanuc 0i. Belgeler mevcut. Yerinde inceleme mümkündür

X ekseni: 607 mm, z ekseni: 286 mm, iş mili hızı: maks. 6000/dak, kontrol: Fanuc 32i A, uzunluk: 1850 mm, genişlik: 1750 mm, yükseklik: 1750 mm, ağırlık: 2,1 t, çalışma saatleri: 59.861 saat. Otomasyon FMB Unirobot MH5LS-SP, taşlama mili Jäger HF-Spindle, ayna MicroCentric 4-410-3-QC, otomatik boyutsal kompanzasyonlu MARPOSS ölçüm sistemi, yağ buharı filtresi S400, Liqui yerçekimi filtresi UR1020 ile temiz tank ve diğer aksesuarlar. Yerinde inceleme mümkündür.

Dönüş çapı: 200 mm, geçiş çapı: 330 mm, çapraz kızak üzerinden geçiş çapı: 260 mm, hareket X / Z: 160 mm / 460 mm, ilerleme X / Z: 24m / dak, hız: 5000 rpm, iş mili boşluğu: 51 mm, iş mili gücü: 16,5kW / 11kW, tork: 1665,5 Nm / 112 Nm, punta: 400 mm, takım konumları: 12. Makine boyutları X/Y/Z: yaklaşık 4200mm/1700mm/2300mm, ağırlık: yaklaşık 3500kg, kontrol: Siemens Sinumerik 810D. Talaş konveyörü dahil. Belgeler mevcut. Yerinde inceleme mümkündür.

Yatak / yüz kızağı üzerinde dönüş çapı: 360mm / 160mm, merkez mesafesi: 800mm, hareket X / Z: 205mm / 810mm, hız: 3150rpm, iş mili deliği: 60mm, takım pozisyonları: 8, hızlı travers X / Z: 10m / dak. Makine boyutları X/Y/Z: yaklaşık 3300mm/1800mm/1800mm, ağırlık: yaklaşık 3300kg, kontrol: Traub System TX-8. Yerinde inceleme mümkündür.

Yatak / yüz kızağı / krank üzerinde dönüş çapı: 460mm / 258mm / 785mm, merkez genişliği: 1016mm, yatak genişliği: 300mm, mil deliği: 58mm, hız: 2000rpm, çap kurşun vida / tüy: 35mm / 65mm, tüy ayarı: 127mm. Makine boyutları X/Y/Z: yaklaşık 1900mm/850mm/1200mm, ağırlık: yaklaşık 1650kg. Belgeler mevcut. Yerinde inceleme mümkündür. Mayıs 2025'in sonundan itibaren satışa sunulması bekleniyor.

Merkez yüksekliği: yaklaşık 230 mm, merkez genişliği: yaklaşık 1000 mm, yatak üzerindeki yörünge çapı: yaklaşık 480 mm, destek üzerindeki yörünge çapı: yaklaşık 200 mm, iş mili deliği: yaklaşık 45 mm, iş mili hız aralığı: 2000 rpm, tahrik gücü: 4kW, makine boyutları X/Y/Z: yaklaşık 2400 mm/1000 mm/1500 mm, ağırlık: yaklaşık 1700 kg. Yerinde inceleme mümkündür.

CNC kontrollü REM dik torna tezgahı mevcuttur. Çalışma çapı: 2500mm-7000mm, çalışma yüksekliği: 1000mm, kontrol: Siemens 840D. Tahrikli aletler dahil. Yerinde inceleme mümkündür.

A WMW lead and feed spindle lathe that was overhauled in 1993 and has not been used since then is available. Center width: 1600mm, turning length: 1600mm, turning diameter: 250mm, turning diameter over bed/cross slide: 450mm/250mm, steel holder surface X/Y: 140mm/140mm, steel cross-section: 25mm/25mm. Speed: 2240rpm, spindle bore: 45mm, faceplate diameter: 450mm, quill stroke: 160mm, max. workpiece weight: 800kg/1250kg, max. journal diameter: 60mm. Including taper turning device, coolant device and quadruple steel holder. Documentation available. On-site inspection is possible. The machine was not used after its overhaul in 1993.

A CNC double-spindle lathe Hyundai with a new bar loader Iemca (Bucci) is available. 1) CNC lathe Hyundai HD2200 SY, turning diameter: 300mm, turning length: 610mm, spindle passage: 65mm, speed: 4000rpm, power: 18.5kW, chuck size: 8 inch, counter spindle passage: 52mm, speed: 6000rpm, chuck size: 5 inch, Y-axis: +/-55mm, tool positions: 24, rapid traverse X/Y/Z: 24m/10m/30m/min, operating hours: 3330h, manufactured parts: 44478. 2) Bar loader Iemca (Bucci) Master 865/33/Mp, year of manufacture: 2023, round bar diameter range: 8mm-65mm, hexagonal bars: 7mm-55mm, square bars: 10mm-45mm, bar length range: 800mm-4300mm, remaining piece length with diameter below 65mm min./max.: 110mm/400mm. Documentation available. On-site inspection is possible.

EMAG CNC dik torna tezgahı mevcuttur. Ayna çapı: 250 mm, yörünge çapı: 260 mm, hareket X / Z: 570 mm / 200 mm, hızlı travers X / Z: 60m / 30m / dak, besleme kuvveti X / Z: 5kN, bilyalı vida çapı X / Z: 40 mm, mil yatak çapı ön: 110 mm, hız: 4500 rpm, güç: 18 / 28kW, şaft çapı: 40mm, tahrikli aletlerin gücü: 12kW, hız: 6000rpm. Makine boyutları X/Y/Z: yaklaşık 2700mm/2100mm/2400mm, ağırlık: yaklaşık 7000kg, açılma süresi: 50416h, otomatik süre: 9016h. Belgeler mevcut. Yerinde inceleme mümkündür.

Yatak/yüz kızağı üzerinde salıncak çapı: 570 mm/420 mm, dönüş çapı: 420 mm, dönüş uzunluğu: 635 mm, travers yolu X/Z: 220 mm/635 mm, hız: 5000 rpm, iş mili deliği: 79 mm, maks. çubuk çapı: 65 mm. Takım konumları: 12, tahrikli takımlar: 6, takım tutucu: VDI 30, hızlı travers X/Z: 24m/30m/dak. Makine boyutları X/Y/Z: yaklaşık 3500mm/2500mm/2000mm, ağırlık: yaklaşık 4500kg. Yerinde inceleme mümkündür.

X ekseni: 607 mm, z ekseni: 286 mm, iş mili hızı: maks. 6000/dak, kontrol: Fanuc 32i A, uzunluk: 4600 mm, genişlik: 1600 mm, yükseklik: 2700 mm, ağırlık: 2,1 t, çalışma saatleri: 34.536 saat. Otomasyonlu FMB Unirobot LR MATE 200iD7L-P2TB, taşlama mili Jäger HF-Spindle, ayna MicroCentric 4-410-3-QC, otomatik boyutsal kompanzasyonlu MARPOSS ölçüm sistemi, yağ buharı filtresi S400, kayış filtresi Knoll KF110/500, menteşeli bantlı konveyör 320 S1 ve diğer aksesuarlar. Yerinde inceleme mümkündür.

Turning length: 450mm, spindle clearance: 65mm, speed: 4000rpm, main spindle/counter spindle power: 18.5kW/11kW, tool positions: 10, driven tools: 10, hydraulic capacity: 150l, hydraulic pressure: 60bar, connected load: 39kW. Rapid traverse X1/X2: 15m/min, feed force: 5000N, feed path: 140mm. Rapid traverse Z1/Z2: 30m/min, feed force: 8000N, feed path: 450mm. Rapid traverse Y1: 6m/min, feed force: 8000N, feed path: +/-35mm. Machine dimensions X/Y/Z: approx. 4150mm/2000mm/1800mm, weight: approx. 4750kg, control: Traub System TX 8F, operating hours: 78825h. Documentation available. On-site inspection is possible.

A CNC double-spindle lathe Traub overhauled in 2025 is available. Turning length: 450mm, spindle clearance: 65mm, speed: 4000rpm, main spindle/counter spindle power: 18.5kW/11kW, tool positions: 10, driven tools: 10, hydraulic capacity: 150l, hydraulic pressure: 60bar, connected load: 39kW. Rapid traverse X1/X2: 15m/min, feed force: 5000N, feed path: 140mm. Rapid traverse Z1/Z2: 30m/min, feed force: 8000N, feed path: 450mm. Rapid traverse Y1: 6m/min, feed force: 8000N, feed path: +/-35mm. Machine dimensions X/Y/Z: approx. 4150mm/2000mm/1800mm, weight: approx. 4750kg, control: Traub System TX 8F, operating hours: 12938h. Including chip conveyor and bar loader LNS Quick Load. Documentation available. On-site inspection is possible.

turning diameter: max. 560 mmturning length: 600 mmcontrol: 840D powerline Siemensgreates pass round over bed: 680 mmSwing dia. over traverse guideway: 565 mmcentre distance: 620 mmMain spindle:: turning speed range - main spindle: 20 - 5.000 min/-1power capacity - main spindel: 25 / 37 kWmax. Torque: 390 Nmspindle nose: 170H5 spindle bearing diameter: 120 mmusable bar diameter: 65 mmmax. chucking diameter: 250 mmC-Axis: 0,025° / 360 °Subspindel:: Spindle speed range subspindle: 20 - 7.000 min/-1power capacity - Sub spindle: 25 / 33 kWmax. Torque: 213 Nmspindle bearing diameter: 90 mmspindle bore: 57 mmspindle nose: 140H5 C-Axis: 0,025° / 360 °turret:: number of toolpositions: 12 pos.Number of driven toolspositions: 12 pos.Spindle speed - driven tools: max. 4.500 min -1power capacity - driven tools: 12,2 kWtool taper: VDI 40 DIN 69880Tool dimensions with square shank: 40 mmaxis st ...

turning diameter over bed: 250 mmturning diameter over slide rest: 145 mmturning length: 550 mmcenter height over bed: 125 mmcentre distance: 550 mmbed width: 135 mmspindle bore: 26 mmturning speed range - stepless: 50 - 2.000 U/minpower requirement: 750 W3-jaw-chuck diameter: 125 mmtaper in tailstock-quill: MK 2 dia. of quill: 30 mmquill stroke: 70 mmvoltage: 230 Vweight of the machine ca.: 120 kgdimensions of the machine ca.: 1,25 x 0,60 x 0,50 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 4000 mmswing diameter: 5500 mmturning height: 2600 mmturning speeds: 60 U/minmain drive motor: 60 / 75 kWControl: Fanuc 31iA workpiece weight max.: 45 tmilling head speed: 1500 U/minram head dimension: 400 x 400 mmmilling spindle drive: 22/25 kWtotal power requirement: - kWweight of the machine ca.: 140 tdimensions of the machine ca.: 12 x 10 x 9 mequipped with:- CNC control Fanuc 31iA- C-axis (0.001°)- Telescopic covers for the cross rail and column guides- 16-position automatic tool changer- Angular milling head- Chip conveyor- coolant through Spindle- Hydrostatic Bearing for the Main Axis Table- High Precision Roller Bearing- Table Main-axis Motor to Control and Drive the C-Axis- Synchronized 2-motor Drive Control System for Driving W-Axis for Cross Rail Movement- Backlash removal technology available when the C-axis is removed from the system.The data for this ad ...

turning diameter: max. 366 mmturning length: 705 mmcontrol: M 730 BM MAPPS IVgreates pass round over bed: 920 mmSwing dia. over traverse guideway: 742 mmMain spindle:: turning speed range - main spindle: 4.000 min/-1power capacity - main spindel: 18,5 / 15 kWspindle nose: JIS A-8 spindle bearing diameter: 140 mmspindle bore: 91 mmmax. usable bar diameter: 80 mmchucking diameter: 250 mmSubspindel:: Spindle speed range subspindle: 6.000 min/-1power capacity - Sub spindle: 11 / 7,5 kWspindle nose: JIS A2-5 spindle bearing diameter: 85 mmspindle bore: 43 mmmax. usable bar diameter: ( - ) mmchucking diameter: 170 mmaxis stroke:: x-travel: 260 mmz-travel: 795 mmY - Axis: +/-50 mmrapid traverse ( X / Y / Z ): 30 / 10 / 30 m/minturret:: number of toolpositions: 12 pos.tool taper: BMT 60 Schank height for square tool: 25 mmDrill shank diameter: 50 mmturret change time: 0,27 sec.Driven Tool P ...

workpice diameter max.: 90 mmforward bearing diameter: 140 mmTurning speeds mainspindle: 4.200 U/minPower: 35,5 KWControl: INDEX C 200-4 travel -x axis: 1.500 mmtravel -z axis: 340 mmtravel -y axis: 180 mmb-axis: 360 °CNC turning and milling center vertical | INDEX - V300 equipped with a turret for driven tools as well as y- + B- axis.Further information:- direct measuring system on X + ZThe machine is in good condition.For additional equipment information please refer to the original order confirmation which is included in the offer of this machine.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: V-300 | V 300The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0390 mm: 240 mm: 1250 mm: 190 mm: 54 mm: 5,5 kw

Circulation/rotation Ø over bed: 475 mmRotation/rotation Ø via cross slide: 260 mmSledge path plan: 260 mmcentre distance: 1000 / 1500 / 2000 mmpower capacity: 22 kWGear stages. m= manual / e= electric.: 2 e Spindle head DIN 55026 / DIN 55027: A6 / 6 Spindle Ø in front bearing: 115 mmspindle bore: 78 / 70 mmturning speed range (V-constant): 1 - 3.000 U/minfeed range flat: 1µ - 1.000 mm/Ufeed range lengthwise and thread: 1µ - 2.000 mm/URapid traverse plan/longitudinal: 5 / 10 m/mindiameter of quill: 70 mmquill travel: 120 mmquill inner cone: 5 MKThis machine is used for the production of individual parts and small batches from simple to the most complex contours.It is characterised by:--> Ease of operation Precision Working range

turning speeds: 6000 U/minx-axis: 550 mmz-axis: 200 mmrapid traverse: 30/20 m/minfeed: 11 m/mincontrol: Siemens 840 C total power requirement: 35 kWweight of the machine ca.: 6,5 tdimensions of the machine ca.: m- speeds: [1/min.] : 6.000- torque [Nm]: 480- swing diam.: 290 mm- power: [kW] 34- chuck diam. 200 mm- turret: 12-fach, VDI 40, Sauter- driven tools 7,8 KW,- x -travel: 550 mm- z- travel: 200 mm- rapid travel: (X/Z) [m/min] 30 / 20- feeds: (X/Z) [m/min.] 11 KN- connected load: [KW] 36 kW- machineweight: [kg] 6.500- chip conveyor, pick up conveyor links,300mm wide, Auswurfhöhe 800mm- Messsystem direkt-linear, Glasmaßstäbe in allen Achsen, Heidenhain- parts conveyor for feeding parts into the machine- Specification:- Overhauled in 2007 for approx. €50,000, complete headstock replaced.- Feed unit replacedThe data for this ad was created with ModulMWS - the software solution of ...

: 0400 mm: 1250 mm: : 200 mm: 80 mm: 315 mm: 2700 U/min : D1-8 DIN 55029 : 73 mm: 140 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number of spindles: 8 bar capacity: 36 mmcontrol: FANUC 30i-B Subspindle speed: 7.500 U/minBar Automatic Lathe - Multi Spindle | DMG GILDEMEISTER - MULTISPRINT 36 equipped with bar feeder and a coolant system.The machine only has 15.666h spindle hours.The machine is in a well-maintained condition and can be inspected under power.For additional equipment information please refer to the original order confirmation which is included in the offer of this machine.The machine works with a EGS loading system ->This can be purchased separatelyAn extensive tool package is included.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: MULTISPRINT36 | MULTISPRINT-36The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Merkez yüksekliği: 102 mmMerkez mesafesi: 450 mmMil deliği: 25 mmMil hızı:: 220 - 2600 Makinenin ağırlığı ca.: TMakinenin boyutları ca.: mAksesuarların eksiksiz olup olmadığıkontrol edilmedi Dolaplar teslimat kapsamına dahil değildir

number of spindles: 8 bar capacity: 36 mmcontrol: FANUC 30i-B Subspindle speed: 7.500 U/minBar Automatic Lathe - Multi Spindle | DMG GILDEMEISTER - MULTISPRINT 36 equipped with bar feeder and a coolant system.The machine only has 6.944h spindle hours.The machine is in a well-maintained condition and can be inspected under power.For additional equipment information please refer to the original order confirmation which is included in the offer of this machine.The machine works with a EGS loading system ->This can be purchased separatelyAn extensive tool package is included.The machine video from the production plant will be shared on request.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: MULTISPRINT36 | MULTISPRINT-36The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number of spindles: 8 bar capacity: 36 mmcontrol: FANUC 30i-B Subspindle speed: 7.500 U/minBar Automatic Lathe - Multi Spindle | DMG GILDEMEISTER - MULTISPRINT 36 equipped with bar feeder and a coolant system.The machine only has 15.650h spindle hours.The machine is in a well-maintained condition and can be inspected under power.For additional equipment information please refer to the original order confirmation which is included in the offer of this machine.The machine works with a EGS loading system ->This can be purchased separatelyAn extensive tool package is included.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: MULTISPRINT36 | MULTISPRINT-36The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.