torna kullanılmış satılık (3,113)

Torna PPL 200-225 - Yatak üzerindeki dönme çapı: 400-450 mm - Sürgü üzerinde dönme çapı: 235-285 mm - Köprü ile offset: dönüş çapı 600-650 mm - Yüz plaka çapı: 350 mm - Yatak genişliği: 320 mm - Motor gücü: 5.5 hp - Takım arabası: 150 mm strok İyi durumda, tamamen işlevsel, sahada görüntülenip denenebilir. Denize gönderim de var. İzleme: Temelde, makalenin satın almadan önce güç altında incelenip test edilebileceğini, yanlış anlamaların önüne geçilmesi için belirtmek isterim. Satın almadan önce sorularınızı sorun, böylece kafa karışıklığı önleyin. Genel sorunuz varsa veya gösterim için randevu almak isterseniz, aşağıdaki veya yukarıdaki telefon numarasından istediğiniz zaman bana ulaşabilirsiniz. Açıklama ve önceki satıştaki hatalar hariç. KDV faturalarımda ayrı olarak gösteriliyor.  ...

CNC Torna Tezgahı Üretici: Gildemeister Tip: CTX 410 V3 Makine No.: 0136004581 Yapım Yılı: 2006 Kontrol: Siemens 840D ShopTurn Çevre çapı: 505 mm Çakan çapı: 210 Mil geçişi: 65 mm Sürücü gücü: 40/%100ED 21/28 KW Hız aralığı – ile: 25-5000 Boyutlar yaklaşık olarak: 4300x2000x1800 Ağırlık yaklaşık olarak: 5600 Kg - 12 ileri tabanca - VDI 40 - C ekseni - Elektrikli aletler 12 istasyon - Paket çubuk işleme - Yonga konveyörleri - Kuyruk kısmı - SMW Autoblok 210BB - 3x eksenel sürülen alet tutucuları - 2x radyal tahrik edilmiş alet tutucuları - Çeşitli diğer alet tutucuları - Revolver için yeni motor Hatalar hariç

CNC Torna Tezgahı Üretici: Gildemeister Tip: CTX 420 Lineer V4 Makine No.: 02260005181 Yapım Yılı: 2005 Kontrol: Siemens 840D ShopTurn Çevre çapı: 680 Çakan çapı: 250 Tahrik gücü: 40/%100 ED: 37/25 KW Hız aralığı – ile arasında: 20-5000 rpm'ye kadar. Yaklaşık ağırlık: 6500 Kg - 12 ileri tabanca - VDI 40 - C ekseni - Y ekseni - Elektrikli aletler 12 istasyon - Yonga konveyörleri - Kuyruk kısmı - SMW Autoblok 250 BH Hatalar hariç

CNC Torna Tezgahı Üretici: Gildemeister Tip: CTX 310 Motor No.: 8042942713C Yapım Yılı: 2008 Kontrol: Heidenhain IT Çevre çapı: 500 mm Spindle Geçişi: 65 Tahrik gücü: %40/%100 ED: 16/12 KW Hız aralığı – ile arasında: 25-6000 rpm'ye kadar Yaklaşık ağırlık: 3500 Kg - 12 ileri tabanca - VDI 30 - Yonga konveyörleri - C ekseni - Elektrikli aletler 12 istasyon - Paket çubuk işleme - LNS QuickLoad Servo 3 kısa yükleyici - Kuyruk kısmı - Hainbuch ToplusMini Axzug 65 Hatalar hariç

An INDEX CNC lathe with counter spindle and IEMCA bar feeder is offered. Main spindle bore: 65mm, max. spindle speed: 7000rpm, axes: 4, live tooling: possible, tool system: VDI25, spindle operating hours: approx. 80000h, control: Siemens 840D. 2) Bar feeder: IEMCA Master 880/MP 33 L, Year of manufacture: 2004, max. bar length: 3300mm, round bars: 8mm-80mm, hexagonal bars: 7mm-65mm, square bars: 10mm-50mm, max. bar weight: 120kg, min. remnant length: 110mm, bar feeder weight: approx. 1350kg. Including chip conveyor. Machine was continuously maintained. The machine is available from October. Documentation available. Inspection possible by arrangement.

Horizontal turning machine manufactured in 1997. This BOEHRINGER DUC 560/2000 features a maximum turning diameter of 570 mm and a turning length of 2000 mm. It includes an 8-position disc turret and a three-jaw chuck with a diameter of 200 mm. If you are looking to get high-quality turning capabilities, consider the BOEHRINGER DUC 560/2000 machine we have for sale. Contact us for further details.

Horizontal turning machine manufactured in 2007. This KEY EAST BV-40160 features a swing over bed of 1,010 mm and a distance between centers of 4,000 mm. It includes a front and rear chuck diameter of 500 mm, along with a digital readout for enhanced precision. If you are looking to get high-quality turning capabilities, consider the KEY EAST BV-40160 machine we have for sale. Contact us for further details.

Control voltage: 24V DC, rated current: 85A, connected load: 39kVA, rated power: 49kW, control-on operating hours: 32,779h, automatic operation 1: 5,040h, automatic operation 2 operating hours: 1,844h, production time: 33,731h, length: 3231mm, width: 2076mm, height: 1917mm, weight: 4.8t, with documentation, chip conveyor and FMB turbo 8-80 bar feeder. An on-site inspection is possible.

Rated current: 60A, control voltage: 24V, connected load: 33kW, length: 2290mm, width: 1350mm, height: 1630mm, weight: 4.65t, operating hours: 78,439h, with documentation, chip conveyor and bar feeder. An on-site inspection is possible.

Vertical turning machine manufactured in 2007. This EMAG VSC 400 features a turning diameter of 400 mm and a swing diameter of 420 mm. It offers an X-travel of 850 mm and Z-travel of 315 mm, with a maximum spindle speed of 4000 rpm. If you are looking to get high-quality turning capabilities, consider the EMAG VSC 400 machine we have for sale. Contact us for further details regarding this machine.

Horizontal turning machine manufactured in 2001. This EMCO EMCOMAT 200X1000 features a turning length of 1,000 mm and a maximum turning diameter over bed of 400 mm. It is equipped with a Fagor 8055 CNC control unit and includes a SMW AUTOBLOCK wedge-type chuck and a Multifix quick-change tool holder. If you are looking to get high-quality turning capabilities, consider the EMCO EMCOMAT 200X1000 machine we have for sale. Contact us for further details.

Horizontal turning machine manufactured in 1999. This Gildemeister CTX400 Serie2 features a maximum turning diameter of 420 mm and a distance between centers of 600 mm. It includes a disc turret with 12 tool stations and a maximum spindle speed of 5000 rpm. If you are looking to get high-quality turning capabilities, consider the Gildemeister CTX400 Serie2 machine we have for sale. Contact us for further details.

This 5-axis Mazak INTEGREX 200 III S was manufactured in 2004. It features a maximum turning diameter of 660 mm and a maximum workpiece weight of 150 kg. The machine is equipped with a tool magazine capacity of 80 slots and a rapid traverse speed of 38 m/min on the X and Z axes. If you are looking to get high-quality turning and milling capabilities, consider the Mazak INTEGREX 200 III S turn-mill centre we have for sale. Contact us for further details.

Distance between centers: 2000mm, control: Siemens Sinumerik 810, the controls flash memory is currently probably defective, but the parameters can still be accessed. an on-site inspection is possible.

A Buffalo CNC lathe in need of repair is offered for sale. Center height: 200mm, distance between centers: 880mm, chuck diameter: 160mm, swing over bed: 410mm, swing over cross slide: 230mm, bed width: 260mm, spindle bore: 46mm, spindle nose: A2-5, max. spindle speed: 5000rpm, X-axis travel: 190mm, Z-axis travel: 855mm, rapid traverse: 12m/min, tailstock quill diameter: 58mm, tailstock quill travel: 140mm, tailstock quill taper: MT4, control: Fagor 8055 TC. Accessories included. Dimensions X/Y/Z: approx. 2286mm/1800mm/2230mm, weight: approx. 2350kg. The feed motor of the spindle drive is defective. An on-site inspection is possible.

Max. turning diameter: 1000mm, max. swing diameter: 1250mm, max. workpiece diameter: 1000mm, max. workpiece length: 850mm, max. workpiece weight: 1000kg, X/Z travel: 1250mm/1000mm, max. speed: 900rpm, feed rate: 14m/min, rapid traverse: 20m/min, spindle nose: DIN 55026 short taper size A15, tool interface: DIN 69880 VDI60 tool holder, spindle diameter at the front bearing: 240mm, control: Siemens Sinumerik 840D. Machine weight: approx. 25t, space requirement: 85m². Equipment: SMW IN-D 1000 chuck, chip conveyor. The machine has no driven tools. Documentation available. Inspection possible by appointment.

Fuse protection: 100A, control voltage: 220V, operating voltage: 380V, connected load: 30,4kW, weight: 14,4t, with four-jaw chuck (diameter: 900mm), tailstock, quill, three steady rests and control system. An on-site inspection is possible.

Center height: 450mm, distance between centers: 3000mm, fuse protection: 630A, rated current: 46A, control voltage: 220V, operating voltage: 380V, frequency: 50Hz, connected load: 22,5kW, weight: 6,1t, with four-jaw chuck (diameter: 800mm), tailstock, quill and three steady rests. An on-site inspection is possible.

Toplamda çeşitli hızlı değişim tutucuları / hızlı değişim tutucuları / aksesuarlar 42 kişi: 7 adet WDL 4/50 16 WDR 4/40 10 adet WDL 4/40 3 adet WB 4/60⌀ 3 parça. WBW 4/60⌀ 1 pc. WBW 23/60⌀ 2 pc. tipsiz Lütfen hangi ürünlerle ilgilendiğinizi bize bildirin. Size daha fazla fotoğraf sunmaktan mutluluk duyarız.

Burada bir Weiler DZ 65, 16 katlı Duplomatik Kıç kulesi, 2 mil, her iki mil için kol başlığı, tüm devir noktalarında sürülen alet, Yonga konveyörü, 2 mil üzerinden soğutucu, yay ejektör 2. mil, çubuk besleyici bağlantısı, damlama tepsisi ile parça çıkarma, parça konveyör bant, çeşitli mil ekleme boruları, yonga konveyörü, malzeme besleme Irco Profimat 3m,

Torna Colchester Bantam VS 3500

Torna Gildemeister NEF 320 K BJ 2002

Torna Gildemeister CT 60 BJ 1990

Dikey İki Mil Dönüş Merkezi - Siemens 840 D Kontrol - Makine yatağı VSC 400 Duo - 2 x disk taret 12 x diametr 40 mm, sürülen - 2 x ek sondaj ve batma istasyonu - Açık iş parçası taşıma sistemi - Transfer ve torlama ünitesi - Harici bir işlem sistemine arayüz - Merkezi soğutma merkezi yüksek basınçlı pompa 70 bar - Manyetik cihaz ve sıkıştırma cihazlarının uçması - İş parçası ölçümü - Araç izleme - Emag ağ seçeneği - Kardeş araç yönetimi Çevre çapı 260 mm X-Trip 860 mm z-hareketi 200 mm Ana mil 2 Maksimum hız 4500 1/dakika'ya kadar Mil aralığı 1055 mm Ana Sürücü 2 AC Asenkron Motor 6ß/%100 ED 39/28 KW Maksimum tork 460 Nm Hızlı geçiş x/ z 45/ 30 m/d

Bar çapı: 8 mm ile 65 mm (yuvarlak malzeme) Çubuk uzunluğu (33L): yaklaşık 3,3 metre Makine tipi: Sabit mil başlığı (otomatik torna tezgahı) Şarjör türü: MP şarjörü (çoklu şarjörü)

A Hitachi Seiki CNC turning center in need of repair is offered for sale. Max. turning diameter: approx. 255mm, max. turning length: approx. 380mm, X/Z travel: 200mm/400mm, spindle speed: up to approx. 3600rpm, spindle motor power: 11kW, bar capacity: approx. 64mm, spindle bore: approx. 78mm, chuck size: approx. 255mm, tool turret: 10/12-station, tailstock taper: MT5, control: SEICOS-L MULTI, version V3R5.G. Weight: approx. 4300kg. A tool holder on the chuck is broken. An on-site inspection is possible.

Cross slide NC1-left, X1-axis: 450mm, cross slide NC1-left, Z1-axis: 1980mm, cross slide NC2-right, X2-axis: 450mm, cross slide NC2-right, Z2-axis: 1980mm, M-head slide-left, Q1-axis: 1980mm, M-head slide-right, Q2-axis: 1980mm, tailstock + steady rest slide-left, W1-axis: 1980mm, tailstock + steady rest slide-right, W2-axis: 1980mm, Y-axis: +/-65mm, workpiece length: 760-3000mm, workpiece clamping diameter: 20-200mm, main drive power: 2x 37kW, main drive speed (stepless): 0-2200/min, tool drive speed (stepless): 0-2320/min, tool holder: VDI50, tailstock center: MK 5, number of tool holders: 12, steady rest: SLU-5 SO, steady rest clamping diameter: 20-200mm, working height: 1300mm, max. workpiece diameter: 20-200mm, max. workpiece weight: 250kg, workpiece drive/clamping: 2x hydraulically operated SAV front-end chucks, max. chuck through-bore diameter: 210mm, spindle power: 2x 37kW, max.  ...

A CNC lathe Optimum is offered. Swing over bed/cross slide: 300mm/200mm, distance between centers: 430mm, X/Z travel: 145mm/465mm, X/Z rapid traverse: 10m/min/12m/min, bar capacity: 30mm, spindle bore: 30mm, max. spindle speed: 4000rpm, tool stations: 6, control: Siemens SINUMERIK 808D ADVANCED. Machine dimensions X/Y/Z: approx. 1655mm/1590mm/1955mm, weight: approx. 832kg. An on-site inspection is possible.

Workpiece length: 700-2400mm, workpiece diameter: 50-200mm, main spindle drive power: 2x 37kW, max. chuck through-bore: 210mm, chuck piston stroke: 25mm, chuck stroke per jaw: 11.1mm, max. chuck actuating force: 52.5kN, max. chuck actuating pressure: 30bar, max. chuck speed: 2000/min, loading and unloading unit range: 2600mm, center clamping head travel: 1200mm, center clamping head stroke: 1200mm, main fuse: 315A, connected load: 150kW, overall length: approx. 10,640mm, main section length: 6800mm, width: 2370mm, height: 2860mm, overall height including superstructure: 3450mm, operating hours: 3143h. With chip conveyor, loading and unloading unit, fixed center clamping head, movable center clamping head, control panel, ILT air cleaner, electrical cabinet, hydraulic cabinet, coolant tank for motor cooling and coolant tank for tool cooling and documentation. Partially overhauled by the ma ...

Machining processes: drilling, turning, milling, axes: Z3 longitudinal slide tool turret, Z4 longitudinal slide tool turret, X3 cross slide tool turret, X4 cross slide tool turret, C1 workpiece drive, C2 workpiece drive, K5 turret swivel axis, K6 tool drive, K7 turret swivel axis, K8 tool drive, travel X3: 251mm, X4: 251mm, Z3: 662mm, Z4: 662mm, tool turret: 12-station radial, DIN 69880-VDI40, drive: DIN 5480-W20x0.8, tool swing diameter: 580mm, specified dimension at tool area: 320mm, length: 13,000mm, width: 7300mm, height: 4100mm, weight: 22t, operating hours: 14,748h. Equipment: OP012 control panel, Kuka handling robot, chip conveyor, coolant tank, hydraulics, pneumatics, electrical cabinet, parts infeed and outfeed, documentation, installation plan, working area diagram, gearbox plan and transport plan. The following components should be overhauled: machine bed (guideways/ball screw ...