testere ahşap çalışma kullanılmış satılık (1,052)

The STB TS350M aluminium/plastic sawing machine is in good condition and complete as shown in the photos. The machine is immediately ready for use. Equipped with a 350 mm saw blade, additional saw blade, pneumatic clamp and mist lubrication. Equipped with a tiltable head and miter options on both sides of 15°, 30° and 45°. The saw automatically clamps pneumatically when pulling the saw arm forward. Technically, optically and generally, the machine is in good condition and can therefore be used immediately. Auction-ID: A1-48979-56

Power: 1,600 W Power supply: 230–240 V, 50/60 Hz Original Saw Blade: Ø216 mm Saw blade bore: Ø30 mm No load speed: Bosch currently reports 5,500 rpm Cutting capacity at 0°: 70 × 312 mm Cutting capacity at 45° miter: 70 × 225 mm Cutting capacity at 45° bevel: 45 × 312 mm Mitre range: 52° left / 60° right Bevel Range: 47° Left / 2° Right Weight: 17.3 kg Features: pull function, precision laser, soft start and two-point dust extraction. Auction-ID: A1-47441-117

Sawblade tiltable: 46 °Length of the rolling table: 3000 mmcutting width: 1300 mmMotor output: 5,5 kWCutting height: 204 mmCutting height at 45°: mmSaw blade diameter: 550 mmSpeed: 2000-6000 U/min.weight of the machine ca.: 1300 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working condition Auction-ID: A3-46186-16472

Working condition Auction-ID: A3-46186-16474

Working condition Auction-ID: A3-46186-16475

Sawblade tiltable: 45 °Length of the rolling table: 3200 mmcutting width: 1350 mmMotor output: 5,5 kWCutting height: ca. 153 mm mmSaw blade diameter: 450 mmSpeed: 3000/4000/5000/6000 U/min.weight of the machine ca.: ca. 1.000 kg: Nein : Ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Wheel diameter: 600 mmCutting height: 380 mmcutting width: 580 mmMotor output: 2,2 kWTable dimensions: 600 x 540 mmTable tiltable: 45 Gradmachine weight ab.: 270 kg: Ja dimensions of machine: 2.085 x 1.035 x 820 mmcutting speed: 1.350 m/minsawblade width: 6-25 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Auction-ID: A1-49210-292

Auction-ID: A7-49302-8

crosscut saw Auction-ID: A1-40420-101

Wheel diameter: 510 mmCutting height: 350 mmcutting width: 500 mmMotor output: 3,5 kWTable dimensions: 640 x 500 mmTable tiltable: 0-45 GradDimensions (L/W/H): mmmachine weight ab.: 295 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: min. 200 / max. 500 mmSpeed: 2800 / 4000 / 5500 U/min.weight of the machine ca.: kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Includes saw blade, spare saw blade and stand Auction-ID: A1-48786-160

saw blade diameter: 350 x Ø 30/40 mmcutting diameter: 135 mmcutting length: 430 mmdimensions of saw-blade: 350x3,0/2,4x40 mmturning speeds: 3800 U/minDust suction hood: 100 mmtotal power requirement: 3,0 kWweight of the machine ca.: 100 kgdimensions of the machine ca.: 1300 x 800 x 1600 mm- Crosscut and miter saws for crosscuts- Miter adjustment on both sides (60° / 45°), with fixed stop- Compound cut on one side up to 45°, with fixed stop- Stable cast iron construction- Precise ball bearing guidance of the tool slide hardened and welded steel shafts- manual saw feed- Saw blade infinitely adjustable in height- socket for opt. suctionCutting data :- Cutting length at 90° = 430 mm- Cutting height at 90° = 135 mm- Cutting length at 45° = 310 mm- Cutting height at 45° = 92 mm Special accessories included:- 1x HM circular saw blade 350 x 3.0/2.4 x 40 mm Z = 108 FTZ neg. for aluminum ...

cutting diameter: 300 mmcapacity 90 degrees: flat: 330 x 260 mmcapacity 90 degrees: square: 260 x 260 mmcapacity 45 degrees: round: 260 mmcapacity 45 degrees: flat: 270 x 200 mmcapacity 60 degrees: round: 180 mmcapacity 60 degrees: flat: 170 x 170 mmheight of material-table: 600 mmPitch min/max: 50.000 mmvice: 335 mm Öffnungband speed: 15 - 100 m/minautomatic feeds: 600 mmdimensions of saw-band: 3650 x 27 x 0,9 mmtotal power requirement: 2,2 kWweight: 1.105 kgrange L-W-H: 3,3 x 2,83 x 2,23 mControl: electro-hydraulic band saw fully automatic, with additional : semi-automatic semi-automatic-dynamic manual .. operationDescription:- robust electro-hydraulic band saw fully automatic (INDUSTRY) MEP - WINDOWS numerical control unit User interface with 7” touch screen display mechanical buttons for the sawing machine’s operating functions guarantees reliable operation, simple and intuitiv ...

saw blade diameter: 520 x Ø 50 mmcutting diameter: 200 mmcutting length: 420 mmCutting height at 45°: 140 mmdimensions of saw-blade: 520x3,6/3,0x50 mmturning speeds: 2800 U/minDust suction hood: 100 mmtotal power requirement: 3,0 kWweight of the machine ca.: 310 kg.range L-W-H: 1400 x 900 x 1650 mm- Crosscut and miter saws for crosscuts- Miter adjustment on both sides (60°/45°), with fixed stops- Shift cut on both sides (60°/45°), with fixed stops- Stable cast iron construction- Precise ball bearing guidance of the tool slide hardened and welded steel shafts- manual saw feed- Saw blade infinitely adjustable in height- socket for opt. suctionFurnishing :- 3.0 kW motor for ALU cuttings- Saw blade can be tilted via handwheel and worm gear (shift cut)- Saw blade diameter 520 mm- Saw blade mounting hole 50 mm- Saw blade speed 2,800 rpm- 400 Volt / 3 kW (S6/40%) motor with brake and aut ...

saw blade diameter: 420 x Ø 40 mmcutting diameter: 170 mmcutting length: 410 mmdimensions of saw-blade: 420x3,2/2,4x40 mmturning speeds: 3500 U/minDust suction hood: 100 mmtotal power requirement: 3,0 kWweight of the machine ca.: 120 kgdimensions of the machine ca.: 1300 x 800 x 1600 mm- Cross-cut and miter saws for cross-cut cuts- Miter adjustment on both sides (60 ° / 45 °), with fixed stop- Shifter cut on both sides 45 °, with fixed stop- Stable cast iron construction- Precise linear bushing guide on the tool slide hardened and ground steel shafts- manual saw feed- Saw blade infinitely adjustable in height- nozzle for opt. SuctionCutting data:- Cutting length at 90 ° = 410 mm- Cutting height at 90 ° = 170 mm- Cutting length at 45 ° = 290 mm- Cutting height at 45 ° = 115 mm Special accessories included:- Adjustment of shifter cut via hand crank, both. adjustable (45 ° / 45 ° ...

With digital displays, Smartouch control panel and Felder dust extraction unit model AF16 Auction-ID: A1-48377-13

cutting width: max. 310 mmCutting height: max. 125 mmSaw blade diameter: 500 mmMotor output: 5,5 kWSpeed: 2.800 U/min.Required air-pressure: 6-8 barWorking height: 900 +/- 20 mmDimensions (L/W/H): 10645x1000x1300 mmSALVAMAC COMBO 500 – The semi-automatic miter sawwith SALVASTOP 100 - electronic length stop/slider-------------------------------------------------- -Pos. 1: Legend 500 under table miter saw-------------------------------------------------- -Maximum cutting area: 220x125/ 260x100/285x80/310x50 mm.When cutting boards that are on top of each other, h max. 100 mm.The structure is made entirely of thick-walled and reinforced full-surfacepainted steel. Solid floor mounting system with flanged steel feetfor the mounting hole.Bimanual safety cut control in ergonomic position.Motor power of the saw motor 5.5 kW.Adjustable cutting speed via a pneumatic controller.Maximum system for  ...

cutting width: max. 310 mmCutting height: max. 125 mmSaw blade diameter: 500 mmMotor output: 5,5 kWSALVAMAC LEGEND 500 – The semi-automatic under-table cross-cut saw-------------------------------------------------- -----------Maximum cutting area: 220x125/ 260x100/ 285x80/ 310x50 mm.When sawing stacked boards h max. 100 mm.The structure is made entirely of thick-walled and reinforced throughoutpainted steel. Solid floor mounting system with flanged steel feetfor the mounting hole.Bimanual safety cutting control in ergonomic position.Engine power of the saw motor 5.5 kW.Adjustable cutting speed via a pneumatic controller.Maximum system for weight balance and longevity. Shock absorbing system.Independent pneumatic adjustment options to adapt to differentTypes of processing.Durable and easily replaceable saw blade adjustment bar.HM circular saw blade, diameter 500 mm, Z=108.Pneumatic upp ...

With 4x air infeed table size each 1800x600mm, outfeed roller table dimensions approximately 7500x5000mm, switch cabinet and safety fence. Used floor space approximately 9500x7400mm Auction-ID: A1-48377-11

Includes flexible extraction pipe, roller conveyor lxbxh 3000x460x860cm, Panhans 76 feed device. Auction-ID: A1-48474-14

Serial number: 6947Operating voltage: 400 VFrequency: 50 HzConnection: 1.3 kWCutting length: approx. 3600 mmCutting height: approx. 1700 mmReference: STS - Lot 1 Auction-ID: A7-49056-244

Production number: 153Saw blade diameter: approx. 300 mmTable dimensions: 940 x 830 mmincl. carriageCarriage length: 1300 mmSlide projection: 900 mmSaw blade swivel: from 45° to 90° Auction-ID: A7-49089-521

2x Stand Alone SawsComprising:Lurem tabler circular sawVertical band saw Auction-ID: A1-48805-220

Serial number: 423.01.325.08Table dimensions: approx. 1700 x 900 mmwith digital stop: 0 - 800 mmFront analogue stop: 0 - 1000 mmReference: Wup - Lot 10 Auction-ID: A7-49056-66

Cutting length: 4,300 mm Control: Power Control Scoring saw: 2.2 kW Cutting depth: 2,200 mm Software: CADmatic 4.0 Saw blade guard: 95 mm Collets: 7 pieces Main saw blade: 350 mm Scoring saw blade: 180 mm Air table: 4 Saw carriage speed forward: 1 - 150 m/min Saw carriage feed return: 150 m/min Program slider feed flow: 90 (EU max. 25) Program slide feed return: 90 m/min Main motor: 13.5 kW equipment: Central angle pressure device Label printer integrated into print bars Completely gloomy machine table Automatic pressure beam height control Automatic cutting height Adjustable contact pressure pressure beam (soft-touch package) Adjustable Contact Pressure Collets (Soft-Touch Package) 5 to. Lift table 1 Power-Concept collet (can be positioned independently of the program slider) Speed Package Groove program Label printer PICA 108 Auction-ID: A7-32339-3

Table dimensions: approx. 660 x 660 mmSaw blade diameter: approx. 300 mmReference: Wup - Lot 8 Auction-ID: A7-49056-65

cutting diameter: 330 mmsaw band length: 4115 mmcutting width: 0,9 mmmain drive motor: 3,7 kWRoller conveyor length: 5000 mmRoller conveyor width: 700 mmroll diameter - bore: 150 mmtotal power requirement: 13 KVAweight of the machine ca.: 1,8 tdimensions of the machine ca.: mBandsaw filling machineThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ...