testere kullanılmış satılık (1,254)

Power 250 W - 220V, never used Overall dimensions: 500 x 500 x 800 mm Weight: 20 kg Auction-ID: A7-44803-216

Power 250 W - 220V, never used Overall dimensions: 500 x 500 x 800 mm Weight: 20 kg Auction-ID: A7-44802-121

Power 250 W - 220V, never used Overall dimensions: 500 x 500 x 800 mm Weight: 20 kg Auction-ID: A7-44802-216

Power 250 W - 220V, never used Overall dimensions: 500 x 500 x 800 mm Weight: 20 kg Auction-ID: A7-44803-121

: neu : ca. 10 Wochen ab Auftrags : Italien : 12680 €: 243.46 €: Schwenkrahmen : 3120x27x0,9 mm: 35/70 m/min: 280 mm: 240 mm: 350x140 mm: rund 230 mm, quadrat 200 : rund 140 mm, quadrat 140 : rund 200 mm, quadrat 170 : 830 mm: 1600 mm: 1550 mm: 1750 mm: 460 kghydraulicvicesaw beam moves up and down by hydraulic cylinderfast descentautomatic fast up/down conrolled by feeler pinadjustable pressure according to section and type of materialdouble safety buton for cycle start2 speedscoolant equipment_CUTTING CYCLE_Vice locking, Quick bow pull-down hydraulically operated, Blade rotation and cooling liquid start-up,Working pull-down, end of the cutting cycle, Stop of blade rotation and supply of cooling liquid,Quick bow lift-up, Stop of bow upwards movement, vice unlocking if selected.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Type: Industrial aluminium profile sawBlade diameter: Ø350 mmMotor power: 2.2 kWSpeed: 3760 rpmElectrical supply: 380V 3F 50 Hz Auction-ID: A7-44526-5

cutting diameter: 250 mmband length: 400 mmcapacity 90 degrees: square: 220 x 220 mmcapacity 90 degrees: flat: 250 x 130 mmcutting speed: 11/19/32 m/mintotal power requirement: 2 kWweight of the machine ca.: 400 Kgdimensions of the machine ca.: 1700 x 550 x 1270 mmHydraulic hacksaw with:- Electric-hydraulic raising and lowering of the saw frame- Coolant system- Good condition- Saw blades-- Saw blade dimensions 400 x 45 x 2.0 mm- Max. opening width of the vice 405 mm- Adjustable stroke speeds and cutting speeds- Mitre-adjustable viceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

dimensions of saw-band: 3150x27x0,9 mm: 40/80 m/mincapacity 90 degrees: round: 260 mmcapacity 90 degrees: square: 250 mmcapacity 90 degrees: flat: 320x200 mm: 230 mm: 210 mm: 210x240 mm: 180 mm: 160 mm: 110x250 mmcapacity 60 degrees: round: 150 mmcapacity 60 degrees: square: 140 mmcapacity 60 degrees: flat: 140x160 mmwork height max.: 870 mmOverall size: 2100x2050x1950 mmControl: NC weight of the machine ca.: 770 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 335 mmsaw band length: 4400 x 34 x 1.1 mmcapacity 90 degrees: flat: 500 x 335 mmcapacity 45 degrees: round: 305 mmcapacity 45 degrees: flat: 305 x 335 mmcapacity 60 degrees: round: 180 mmcapacity 60 degrees: flat: 170 x 335 mmclamping range: 0 - 500 mmwork height max.: 750 mmcoolant capacity: 100 lengine output: 3.0 kWweight: 1320 kgrange L-W-H: 1450 x 2350 x 1950 mm in a well-kept condition current new price machine approx. 35.000 euros special price on requestEquipment:- robust electro-hydraulic mitre bandsaw semi-automatic (INDUSTRY) Particularly suitable for universal use in a variety of applications. cross-sections, materials and frequently changing miter cuts Semi-automatic sawing sequence with workpiece clamping-sawing-raising- Central machine operation- stepless manual miter adjustment miter adjustment 45°li - 90° - 45°re - 30°re Digital actual angle ...

saw blade diameter: 350 x Ø 32.0 mmcapacity 90 degrees: flat: 175 x 75 mmcapacity 90 degrees: square: 110 x 110 mmcapacity 45 degrees: flat: 100 x 80 mmcapacity 45 degrees: square: 85 x 85 mmturning speeds: 3000 U/mintotal power requirement: 1.5 kWweight of the machine ca.: 180 kgdimensions of the machine ca.: 870 x 710 x 1435 mmEquipment :- semi-automatic circular saw for cutting PVC and aluminum profiles- two-hand safety operation- Miter adjustment : left 0 / - 45 / - 60 right 0 / 45 / 90- Large protective hood, covers entire working area- Saw blade- 2x vertical pneumatic clamping cylinders- Adjustable blade and cutting feed- Air dust gunWork sequence1) Setting the cutting angle2) Inserting the material3) Adjusting the stroke speed4) Bring the clamping cylinder up to 20 mm of material5) Clamp the material6) The machine is ready for operation by pressing the start button.7) Press and h ...

: neu : ca. 10 Wochen ab Auftrags : Italien : 9420 €: 181.81 €: Schwenkrahmen : 2450x27x0,9 mm: 35/70 m/min: 220 mm: 200 mm: 250x150 mm: rund 160 mm, quadrat 140 : rund 90 mm, quadrat 90 mm : 800 mm: 0.7 kW: 1330 mm: 1300 mm: 1880 mm: 350 kghydraulicvicesaw beam moves up and down by hydraulic cylinderfast descentutomatic fast up/down conrolled by feeler pinadjustable pressure according to section and type of materialdouble safety buton for cycle start2 speedscoolant equipment_CUTTING CYCLE_Vice locking, Quick bow pull-down hydraulically operated, Blade rotation and cooling liquid start-up,Working pull-down, end of the cutting cycle, Stop of blade rotation and supply of cooling liquid,Quick bow lift-up, Stop of bow upwards movement, vice unlocking if selected.OPTION:Adjustable vice pressure (R1) EUR 403,--The data for this ad was created with ModulMWS - the software solution of Logo ...

saw blade diameter: 350 mmcapacity 90 degrees: round: 120 mmcapacity 90 degrees: square: 110 mmcapacity 90 degrees: flat: 200x88 mmcapacity 45 degrees: round: 115 mmcapacity 45 degrees: square: 110 mmcapacity 45 degrees: square: 150x80 mmtotal power requirement: 1,5/1,8 kWweight of the machine ca.: 0,27 tdimensions: 1,1 x 0,95 x 1,7 m- Hydropneumatic semi-automatic - Miter left/right 45° - head diagonal cuts up to 45° (shifter) - Ball bearing table - pneumatic. Double clamping device - Machine base with fog spray device - Chip extraction socket on the saw blade protective hoodThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Testere bıçağı çapı: 400 mm kapasite 90 derece: yuvarlak: 135 mm kapasite 90 derece: kare: 130 mm: 200 x 80 mm testere bıçağı dönüş hızı: 12 / 25 m/min. toplam güç gereksinimi: kW makinenin ağırlığı ca.: 0,75 makine ölçüsü: 1,2 x 0,9 x 1,8 mSoğuk dairesel testere- Yarı otomatik- Hidrolik kelepçe- Soğutma sistemi- Koruyucu kapak- iyi durumdaBu reklamın verileri, LogoTech oHG'nin yazılım çözümü ModulMWS ile oluşturulmuştur.

kesme çapı: 260 mm bant uzunluğu: 450 x 40 x 2 mm kapasite 60 derece: kare: 240 mm: 260 x 180 toplam güç gereksinimi: 2,0/2,6 kW makinenin ağırlığı ca.: 1,4 boyut: 2,1 x 1,7 x 1,0 mBu reklam için veri, LogoTech oHG'nin yazılım çözümü ModulMWS ile oluşturulmuştur.

kesme çapı: 320 mm bant uzunluğu: 535 x 40 x 2,0 mm kapasite 90 derece: kare: 300 mm kapasite 90 derece: düz: mm kesme hızı: m/minno. Vuruş sayısı: 45 - 62 - 90 - 125 Hub/minimum toplam güç gereksinimi: 3,0 kW makinenin ağırlığı: 0,35 KgBoyutlar: 1,4 x ,4 x 1,2 mHidrolik yay testere: - Soğutma sistemi - Acil durdurma cihazıBu reklamın verileri, LogoTech oHG'nin yazılım çözümü ModulMWS ile oluşturulmuştur.

cutting diameter: 450 mmsaw band length: 6600 x 41 x 1,3 mmtable height: 800 mm: 450 mm: 450 mm: 450 x 270 mmworkpiece weight: 15 - 95 m/min: 7,5 kWwork height max.: 3000 kgconnected load: 3750 x 1400 x 2100 mmControl: NEW PRICE ~ 40.700 EUROvery good conditionSemi-automatic bandsaw, two-column guidedEquipment:- hydraulic vice- infinitely variable cutting speed- chip conveyor- line laser- driven chip brush- coolant device- operating instructionsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 220 mmcapacity 90 degrees: square: 220 x 220 mmturning speed range:: 20 - 140 m/minsaw band length: 3720 x 34 x 1.1 mmheight of material-table: 825 mmcoolant capacity: 80.0 ltotal power requirement: 2.5 / 3.5 kWweight of the machine ca.: 1500 kgrange L-W-H: 2350 x 2050 x 1500 mm- in checked conditions - machinevideo - https://www.youtube.com/watch?v=joc0EbemYC8Equipment:- electro-hydraulic band saw - FULLY AUTOMATIC- for sawing hollow profiles and solid materials made of steel, stainless steel,. tool steel, non-ferrous metals and plastic- control panel on the front right including button for manual operation (setup/individual cut)- electro-hydraulic material clamping- stepless cutting speed .. 20-140 m/min.- electro-motor chip conveyor- manual adjustment of the material feed range via handwheel including analogue value display- automatic height adjustment of the saw fra ...

kesme çapı: 325 mmsaw bant uzunluğu: 4200 mm kesme genişliği: 500 mm: 15 - 150 m/dq. çalışma yüksekliği maksimum: 750 mmBu reklam için veri, LogoTech oHG'nin yazılım çözümü olan ModulMWS ile oluşturulmuştur.

Testere bant boyutları: 4200 x 34 x 1,1 mm kapasite 90 derece: yuvarlak: 325 mm kapasite 90 derece: düz: 500x300 mm: 300 mm: 300x300 mm: 200 mm: makinenin ağırlığı ca.: 1250 kg makinenin boyutları yaklaş: 2250 x 2100 x 1280 mm Bu reklamın verileri, LogoTech oHG'nin yazılım çözümü olan ModulMWS ile oluşturulmuştur.

capacity 90 degrees: round: 260 mmcapacity 90 degrees: square: 260 x 260 mmcapacity 90 degrees: flat: 400 x 260 mm: 250 mm: 240 x 240 mm: 240 x 260 mm: 250 mm: 250 x 250 mm: 290 x 250 mmcapacity 60 degrees: round: 160 mmcapacity 60 degrees: square: 160 x 160 mmcapacity 60 degrees: flat: 110 x 260 mm: 190 mm: 190 x 190 mm: 210 x 190 mmdimensions of the machine ca.: 1700x2000x1600 mmweight of the machine ca.: 960 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

seri numarası: 1106479 : 400 miter: ja soğutma: ja Bu reklamın verileri, LogoTech oHG'nin yazılım çözümü olan ModulMWS ile oluşturuldu.

cutting diameter: 255 mmdimensions of saw-band: 2750 x 27 x 0,9 mmcutting width: 200 x 320 mmcutting speed: 20 bis 80 m/min: 125 mm: 125 x 125 mm: 195 mmImpact energy: 350 mmconnected load frequency: 400 Volttotal power requirement: 1,5 kWweight of the machine ca.: 290 Kgdimensions: 1,1 x 0,8 x 1,75 mDouble miter band saw-Miter cuts up to 60° left and 45° right-Vice with quick clamping device-Band tension control-Electr. Automatic coolingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 235 mmdimensions of saw-band: 2645 x 27 x 0,9 mmcutting width: 280 x 190 mmcutting speed: 45/90 m/min: 120 mm: 120 mm: 190 mmImpact energy: 170 mmconnected load frequency: 400 Volttotal power requirement: 1,1 kWweight of the machine ca.: 290 Kgdimensions: 1,2 x 0,8 x 1,2 mDouble miter band saw-Miter cuts up to 60° left and 45° right-Vice with quick clamping device-Band tension control-Electr. Automatic coolingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 510 mmcutting diameter: 150 mmcapacity 90 degrees: flat: 450 x 150 mmcapacity 90 degrees: square: 150 mmturning speeds: 29 / 58 m/min.total power requirement: 4,2 kWweight: 1,55 trange L-W-H: 1,8 x 1,7 x 1,7 mmLong-cut cold circular saw, semi-automatic- with miter adjustment left 50°, right 60°- digital cutting angle display- hydraulically adjustable feed speed- hydraulic workpiece clamping- 4 spare saw bladesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 350 mmcapacity 90 degrees: round: 120 mmcapacity 90 degrees: square: 110 mmcapacity 90 degrees: flat: 200x88 mmcapacity 45 degrees: round: 115 mmcapacity 45 degrees: square: 110 mmcapacity 45 degrees: square: 150x80 mmtotal power requirement: 1,5/1,8 kWweight of the machine ca.: 0,59 tdimensions: 1,9 x 1,4 x 1,8 mHydropneumatic Fully Automatic• Mitering Left/Right• Bevel cuts up to 45° (shifter) a. b.• Pneumatic double clamping device• Pneumatic vertical clamping device• Integrated coolant spray systemMPS control:• Save cutting start/end position• Display of power consumption, piece count, cutting time, etc.• Adjustable water cooling• Cutting pressure regulatorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sawblade width max.: 120 mmWeight: 350 kgMotor output: 1,3 kWWINTER AUTOMATIC BAND SAW GRINDING MACHINE BANDSAWMAX 120 PNK-ABPNK-AB is specially designed for grinding the teeth of various band saw blades used in various forms, width and thickness.Compact and rigid grinding unit moving on linear bearings of PNK-AB machine provides precise and stable grinding.Technical specifications:- Band Saw Width 15-120mm- Tooth pitch Max. 60mm Tooth depth 0-30mm- Tooth forms PV,NV,KV,PU,NU- Hook angle -10° to +30°- Feeding rate 0-90 teeth/min.- Motor quantity 2- Grinding wheel motor – 1.1kW, 1400 r.p.m.- Gearbox motor double-rev. – 0.55kW, 1400 r.p.m- Grinding wheel diameter Ø250mm- Grinding wheel bore diameter Ø20mm- Grinding wheel thickness 8mm/10mm/13mm (depending tooth pitch)- Operating voltage 400V, 3Ph, 50-60Hz- Total power ~1,3kW- Dimensions 80120175cm- Net/gross weight 350/375kgPNK-AB  ...

cutting diameter: 320 mmsaw band length: 3400 x 27 x 0.9 mmcapacity 90 degrees: flat: 320 x 400 mmcapacity 45 degrees: flat: LI 320 x 280 mmcapacity 45 degrees: flat: RE 320 x 260 mmcapacity 60 degrees: flat: RE 320 x 140 mmband speed: 35 + 70 m/minwork height max.: 930 mmvoltage: 400 Vtotal power requirement: 2.67 kWweight: 950 + 250 kgrange L-W-H: - mm well-maintained condition () current new price incl. accessories ~ 40.000 Euro special price on requestEquipment:- electro-hydraulic vertical mitre bandsaw- with large cutting range and small footprint- Robust material support table- miter cuts are carried out fully automatically electro-hydraulic miter adjustment left right- Up to 99 cutting programs- Central operation of all machine functions from the front- Loading also possible from above- Precise positioning thanks to accurate measuring system- electro-hydraulic miter adjustment lef ...

roll diameter: 315 mmthroat: 295 mmworkpiece height: 190 mmMotor Capacity: 0,37/0,8 kWtable-size: 470 x 450 mmsaw band length: 2220 mmcutting speeds: 450 + 900 m/minweight of the machine ca.: 110 kgdimensions of the machine ca.: 640 x 510 x 1600 mmElectric 380 Volt: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 450 mmcutting diameter: 150 mmturning speeds: 6 / 12 / 24 / 48 U/mincapacity 90 degrees: flat: 240 x 70 mmcapacity 60 degrees: flat: 170 x 70 mmcapacity 30 degrees: flat: 120 x 70 mmcapacity 90 degrees: round: 150 mmcapacity 60 degrees: round: 145 mmcapacity 30 degrees: round: 120 mmcapacity 90 degrees: square: 140 x 140 mmcapacity 60 degrees: square: 125 x 125 mm: 100 x 100 mmtotal power requirement: 3,6 kWweight of the machine ca.: 1150 kgdimensions: 1450 x 1610 x 1900 mmSemi-automatic mitre sawEquipment:- miter 30° / 60° / 90°- digital display- roller conveyor- Hydraulic clamping- Hydraulic saw blade feedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.