testere kullanılmış satılık (1,185)

Auction-ID: A1-41278-642

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 33700 €: 643.67 €: Doppelsäulenführung : 6300 x 41 x 1,3 mm: 15 - 120 m/min: 440 mm: 440 mm: 640 x 440 mm: rund 440 mm, rechteck 400 : rund 250 mm, rechteck 250 : rund 390 mm, rechteck 390 : 860 mm: 1.1 kW: 4 kW: 0.12 kW: 3150 mm: 1850 mm: 2115 mm: 2050 kg3° inclined sawing bandblade brushcontrol panelhydraulic vicehydromechanical blade tensioninverterlinear wayheight adjustmentpressure adjustmentcoolant pumpsaw bladesecurity switchgearboxsyncronized movement of sawing arm/clamping jawhydraulic uplift of sawing frameuser manual in GERMAN or ENGLISHALTERNATIV:Version BMSY 440 CDGH NCwith automatic mitre adjustment by NC controlThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Türkei : 22700 €: 435.84 €: Doppelsäulenführung : 4800x34x1,1 mm: 20-100 m/min: 380 mm: 380 mm: 430x380 mm: 590 mm: 0.55 kW: 3 kW: 0.12 kW: 2900 mm: 950 mm: 1660 mm: 1342 kgblade brushcontrol panelhydraulic viceoptical adjustment switchhydromechanical blade tensioninvertermechanic top clampingmaterial limit shaftcoolant pumpsaw bladesecurity switchgearboxpressure adjustment1,2 meter roller tableuser manual in GERMAN or ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 14200 €: 272.64 €: Schwenkrahmen : 4160x34x1,1 mm: 20-100 m/min: 320 mm: 320 mm: 610x320 mm: rund 260 mm, quadrat 225 : rund 320 mm, quadrat 320 : rund 320 mm, quadrat 320 : 740 mm: 0.37 kW: 2.2 kW: 0.12 kW: 2100 mm: 1200 mm: 1350 mm: 1150 kg: rund 320 mm, quadrat 320 blade brushcontrol panelheight adjustment by switchhydromechanical belt tensioninvertermaterial limitation shaftcooling equipmentsaw bladesecurity switchgearboxadjustable graduation scale for miter cuts1,2 meter roller conveyorhydraulic lifting of the saw frameuser manualin GERMAN or ENGLISHOPTION:hydraulic top clampingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Auction-ID: A7-48452-5

saw blade diameter: 400 mmcutting diameter: 130 mmcapacity 90 degrees: square: 120 x 120 mmcapacity 90 degrees: flat: 220 x 80 mmfeed length: 600 mmfeed length: multiple: 1800 mmcutting speed: 10/13/15/20/26/30 m/minmitre joint cuts -/+ degrees: 60 total power requirement: 5,5 kWweight of the machine ca.: 1,8 tdimensions of machine L x W x H: 2,60 x 1,21 x 1,98 m- mitre cutting +/- 60 ° with DRO -Accessories: new sawblade 400 mmø, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Italien : 25680 €: 490.49 €: Schwenkrahmen : 3270x27x0,9 mm: 35/70 (PLC) m/min: 20-100 (CNC/Touch) m/min: 300 mm: 240 mm: 420x200 mm: rund 240 mm, quadrat 230 : rund 170 mm, quadrat 170 : 220 mm: 835 mm: 0.37 kW: 0.12 kW: 3220 mm: 2050 mm: 1900 mm: 1090 kgVERSION PLC: adjustment of material feed by handwheel, counter and limit switchVERSION CNC:feed lenght and numbers by CNC (99 progamms)VERSION TOUCH: as CNC but with 7", touchscreen for easier operationautomatic cutting cycle clamping, saw blade and cutting fluid on, cutting operation, saw blade and cutting fluid off, fast return stroke, declampautomatic feed 800 mm/strokechip conveyer (CNC/Touch)variable cutting pressureMachine with 2 cutting speeds (PLC) orspeed variator (CNC/Touch)cutting fluid systemautomatic saw blade breakage detectionhydraulic vicessuggested max. diam. in automatic mo ...

: neu : ca. 10 Wochen ab Auftrags : Italien : 45210 €: 863.51 €: Schwenkrahmen : 3120x27x0,9 mm: 20-100 m/min: 280 mm: 240 mm: 310x240 mm: rund 230 mm, quadrat 230 : rund 140 mm, quadrat 140 : rund 200 mm, quadrat 170 : 240 mm: 835 mm: 0.37 kW: 1.5 kW: 0.12 kW: 1.95 Nm: 1.95 Nm: 2800 mm: 2000 mm: 1820 mm: 1200 kgCNC control with 7", touchscreen for following functions:feeding length, pieces and rotation of the bow for mitre cuttingautomatic feed 1000 mm / strokevariable cutting pressuremachine with speed variatorcoolante equipmentmotorizes chip brushchip conveyerautomatic saw blade breakage detectionhydraulic clamping vicesRecommended max. diameter of solid material in automatic mode: 150 mmuser manual in English or GermanThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 420 mmsaw band length: 5.800 mmcutting width: 540 x 420 mmheight of material-table: 830 mmdimensions of saw-band: 5800 x 38 x 1,3 mmmitre joint cuts -/+ degrees: 90 - 45 cutting speed: 17 - 110 m/minpower capacity: 5,5 kWvoltage: 400 Vcoolant: total power requirement: kWweight of the machine ca.: 2,4 tdimensions of the machine ca.: 3,40 x 1,40 x 2,30 m- Fabr.No.: 590218- mitre cutting 85°/-15°- material bundle clamping- material feed by motor driven transport roll with hydraulic elevation- chip conveyor- coolant equipment- machine lampThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Auction-ID: A1-47352-1047

cutting diameter: 305 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

kesme çapı: 300 mmsaw bant uzunluğu: 3900 mm toplam güç gereksinimi: makinenin yaklaşık 3 kW ağırlığı: 0,3 tBu reklamın verisi, LogoTech oHG'nin yazılım çözümü olan ModulMWS ile oluşturulmuştur.

Maximum capacity around 600 mm; maximum capacity square 620x600 mm; fully automatic; NC controlled; saw blade size 6560x41x1.3 mm; cutting speed 16 - 85 meters/minute; equipped with adjustable bundle clamp, clamp height 360 mm; including matching freestanding rolling bar; roll width 500 mm; roller conveyor length 2500 mm; Auction-ID: A1-47352-10

capacity 90 degrees: round: 300 mmcapacity 90 degrees: square: 250 mmcapacity 90 degrees: flat: 380x250 mm: 260 mm: 250 mm: 300x200 mm: 180 mm: 170 mm: 200x170 mm: 240 mm: 210 mm: 280x160 mmdimensions of saw-band: 3770x27x0,9 mm: 385 mmspeed: 40/80 m/mintotal power requirement: 1,5/1,8 kWweight: 695 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2000 : 6253 : prompt, Zwischenverkauf v : 1900 €: 1 : Schwenkrahmen : 2480 x 0,9 x 27 mm: 45 / 90 m/min: 225 mm: 180 x 245 mm: rund 100 mm, 100 x 100 mm : rund 160 mm, 160 x 160 mm : 935 mm: 1.1 kW: 1500 mm: 700 mm: 1400 mm: 225 kgDownfeed with damper cylinder and manual valveCoolant equipmentVice with fast clamping leverRoller table 2000 mm with manual gauge3 pcs. spare bandsOperating manual with EC conformity declarationOPTIONS:Further roller tables and band saw blades on requestBUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISEWe offer you maximum security and complete transparency.• HONEST INSIGHTS: Detailed photos and functional videos of the current condition• LIVE ON-SITE CHECK: Live testing is possible at our facility• DIGITAL DEMONSTRATION: Individual live demonstration via video call• RISK-FREE PURCHASE: 14-day return policyDetails:htt ...

Power 250 W - 220V, never used Overall dimensions: 500 x 500 x 800 mm Weight: 20 kg Auction-ID: A7-48339-216

including spare saw blades Auction-ID: A1-47352-213

Auction-ID: A1-47352-185

Power 250 W - 220V, never used Overall dimensions: 500 x 500 x 800 mm Weight: 20 kg Auction-ID: A7-48339-121

In its original box. Never used. Carton size: 88 x 62 x 44 Auction-ID: A1-48310-318

Machine can still be made working but is incomplete as it stands. Machine weighs about 3 Tons Auction-ID: A3-46078-17159

In its original box. Never used. Motor: 3.5 kW Carton size: 63 x 36 x 47 Auction-ID: A1-48310-1

Sale due to renovation of workshop. Perfectly working. Including the necessary tools. See attached photos. Dust extractor hood below and above the saw • intended for workshop use (a lot of dust in wood) Voltage: 400 V (three-phase current) • ⚡ Power: 3,000 – 5,500 W • Saw blade: 300 – 400 mm • Extraction connection: usually Ø100 mm Auction-ID: A3-46078-7002

In its original box. Never used. Carton size: 88 x 62 x 44 Auction-ID: A1-48310-295

dimensions of saw-band: 2910 x 27 x 0,9 mmcapacity 90 degrees: round: 240 mmcapacity 90 degrees: flat: 310 x 240 mm: 200 mm: 200 x 200 mm: 200 mm: 200 x 200 mm: 140 mm: 200 x 140 mmrest piece length: 60 mmwork height max.: 900 mmdimensions: 800 x 1750 x 1500 mmweight of the machine ca.: 470 kgControl: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

In its original box. Never used. Motor: 3.5 kW Carton size: 63 x 36 x 47 Auction-ID: A1-48310-2

In its original box. Never used. Carton size: 88 x 62 x 44 Auction-ID: A1-48310-317

Machine stored in working condition. Machine weighs about 3 Tons Auction-ID: A3-46078-17160

In its original box. Never used. Carton size: 88 x 62 x 44 Auction-ID: A1-48310-293

In its original box. Never used. Carton size: 88 x 62 x 44 Auction-ID: A1-48310-294