kauçuk makineleri kullanılmış satılık (420)

machine measurements: ca. 1030 x 1110 x 1950 mmmachine weight: 800 kgpower capacity: ca. 2,8 kWCondition: usedSpecification: SiloStar 924 dosing system - used- For dosing liquid silicone LSR- LSR dosing with servo-hydraulic unit, servo motor 2.8 kW- Dosing with piston pumps- Uniform emptying of components A + B via proportional compensation cylinders- Variable mixing ratio- Touchscreen with visualised user interface- Containers: 200 litre drums- Operation via 10 inch touch display- Automatic mixing material pressure control with sensor directly on the mixing block- Pressure sensor for A + B- Circulation device A + B- Power connection: 380-480 VAC, 50/60 Hz (3P + PE), 16 A- Mixing head machine connection- Hose package 2x nylon DN 16 x 2500 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Test force: -- kNDimensions (HxWxD): -- mmweight: 76 kgCondition: Used, ready for useSpecification: Mitutoyo image processing and profile measuring deviceType: Quick Scope QS-250Z 1J- UsedThe Quick Scope QS-250Z is used to measure:- Outer diameter- Inner diameter- Distance measurement- Parallelism- AngularityThe device was used in quality assurance in a single-shift operation.Technical data:- Measuring range: X = 200 mm, Y = 250 mm, Z = 100 mm- Accuracy: 5 µ / resolution 0.5 µm- Image capture unit: 1/3 CCD color camera- Travel speed max.: 80 mm/s- Acceleration max.: 250 mm/s²- Table dimensions: 269 x 311 mmLighting:- Transmitted light: 12V / 30W halogen- Coaxial incident light: 12V / 50W halogen- Fiber optic ring light: 12V / 100W halogenSoftware: QSPAK Version 3.1Operating system: Win10proWorkpiece weight: max. 10 kgWeight:  ...

clamping force: 500 kNinjection volume: 76,5 cm³screw diameter: 32 mmplaten size: 360 x 335 mmCondition: used, as good as newSpecification: Injection moulding machine for LSR - Demonstration machine as good as new clamping unit:- clamping unit: horizontal- Clamping force: 500 kN- Opening stroke max.: 400 mm- Platen distance max.: 650 mm- Mould installation height min.: 250 mm- Clear width between the tie bars: 360 x 335 mm- Ejector stroke max.: 80 mmInjection unit SP 82:- Screw diameter: 32 mm- Screw L/D ratio: 16.3- Screw stroke max.: 95 mm- Injection volume max.: 76.5 cm³- Injection pressure: 1076 bar- Plasticising flow: 13 g/s- Injection flow:  ...

roll diameter: 200 mmroll length: 400 mmrolls drilled: Peripher Nip adjustment: hydraulisch total power requirement: 2x 5,5 kWCondition: new rolling mill, with CE marking, with 2 year warrantySpecification: Monoblock laboratory rolling mill 200 x 400 mm - new- Roller diameter: 200 mm- Roll length: 400 mm- Roll bore: peripherally drilled- Individual drives: variable friction ratio- Roller bearings: roller bearings with manual grease lubrication- Gap adjustment: hydraulic- Gap adjustment: approx. 1 - 20 mm, during normal operation operation- Speed range approx.: 2.5 - 19.5 rpm- New hydraulic unit for roller gap and emergency system emergency system- New Johnson-Fluiten rotary joints- two adjustable guide plates Tecafine PE5 Natural ...

roll diameter: 250 mmroll length: 500 mmrolls drilled: peripher Nip adjustment: hydraulisch total power requirement: 2x 5,5 kWCondition: new rolling mill, with CE marking, with 2 year warrantySpecification: Monobloc laboratory rolling mill 250 x 500 mm - new- roll diameter: 250 mm- Roll length: 500 mm- Roll bore: peripherally drilled- Single drives: variable friction ratio- Roller bearing: roller bearing with manual grease lubrication- Gap adjustment: hydraulic- new hydraulic unit for roller nip and emergency system- New rotary unions make Johnson-Fluiten- two adjustable guide plates to adjust the working range on the rollers. - Working range approx.: 100 to 460 mm - Roller gap, during the working phase 25 mm - tiltable guide plates made of ...

roll diameter: 350 mmroll length: 700 mmrolls drilled: Kernbohrung Nip adjustment: hydraulisch 0total power requirement: 22 kWCondition: used, overhauledSpecification: Rolling mill 350 x 700 mm - second-hand model with motor on the side of the rollers- roller diameter: 350 mm- roller length: 700 mm- Rollers: with core bore, with central chamber for water cooling- Fixed friction between the rollers- Rollers mounted on bronze bushes with circulating oil lubrication via pump,- equipped with new slewing rings for connection to the water circuit- Gap adjustment: hydraulic, NEW- Hydraulic unit NEW- Tilting guide plates made of steel- New roller container, made of stainless steel, for holding mixture- bi-directional bars- two safety brakes for NOT stop- AC motor: 22 KW - 400 Volt - 50 Hz- New  ...

roll diameter: 600 mmroll length: 1800 mmrolls drilled: Flaschenhals Nip adjustment: hydraulisch 0total power requirement: 132 kWCondition: used, completely overhauled, with warrantySpecification: Rolling mill 600 x 1800 mm - used monobloc model - motor under the rolls- roller diameter: 600 mm- roll length: 1800 mm- Roller core with central chamber for water cooling- Fixed friction between the rolls - hydr. gap adjustment: new- hydraulic unit: new- Tiltable steel guide plates- Rollers on bronze bearing bushes with oil circulation lubrication via pump- Rollers with new ball bearing slewing rings, make Maier, for connection to the water circuit to the water circuit- AC main motor: 132 kW - 400 V - 50 Hz- two Safety brake for EMERGENCY STOP- Roller tank made of stainless steel to hold the mixture-  ...

volt: 380 Vağırlık: 1,4 t:

Key data: 370 liter

PN-370l Mikser mevcut Pnöma. Hopper Dişli Kutusu 2 x 1050kW İnvertörlü DC Motor Besleme ölçeği Yağ ölçeği Açıklama ektedir!

Key data: 660 mm, 2100 mm

4 adet Buzuluk 84" Değirmenler mevcut! Delinmiş Rulolar, Makaralı Rulmanlar, elektrikli Nip ayarı, Bullgear Tahrik 2 x Soldan Direksiyonlu 2 x Sağdan Direksiyonlu Açıklama ektedir!

soğuk besleme vakumlu ekstruder Troester 90 mm x 18 D, besleme silindiri ile, tahrik 46 kW, pasta hızı 10 ila 60 rpm, 5 TCU,

soğuk besleme ekstrüderi - 60 mm x 18 D vakum, besleme silindiri ile, tahrik 22 KW, vida hızı 10 ila 60 rpm, dişli pompa ile, 5 TCU,

Airspring üretmek için Ekipmana sahip eksiksiz bir Tesis mevcuttur! 3 Rulo Kalender Hatlı ve 84" İkiz Değirmen Önyargı Kesici Birkaç İnşaat makinesi birkaç hidrolik kürleme presi test makinesi 3 x montaj hattı Sarıcı ...

Key data: 2000 mm, 1300 mm

mevcut Berstorff Önyargı Kesici Manuel ekleme ile 0-50 derece açı Otomatik ekleme ile 90 derece Ce sertifikalı Açıklama ektedir!

90'lar soğuk besleme ekstruder, GE 90 x 16 D Vac, Troester yapmak, büyük hortum / profil püskürtme kafası ile, sürücü 52 KW Siemens AC, 4 TCU Siengle

clamping force: 4.000 kNinjection volume: 4.000 cm³screw diameter: -- mmplaten size: 800 x 710 mmCondition: used,Specification: Rubber Injection Molding Machine - second-handclamping unit:- Clamping force: 4000 kN- heating platen size: 800 x 710 mm- ejection device: 2-layerInjection unit:- Injection volume max.: 4,000 cm³- Original screw 1005.10.008 B/cThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

clamping force: 350 kNinjection volume: 58,5 cm³screw diameter: 28 mmplaten size: 260 x 254 mmCondition: used,Specification: injection moulding machine for TPE - usedclamping unit:- clamping unit: vertical- clamping force: 350 kN- opening stroke max.: 300 mm- platen distance max.: 500 mm- Mould installation height min.: 200 mm- Clear width between tie bars: 260 x 254 mm- Ejector stroke max.: 80 mm- Clamping unit: VV- Lift of protective bonnet: 500 mmInjection unit:- Screw diameter: 28 mm- Screw L/D ratio: 18.6- Screw stroke max.: 95 mm- Injection volume max.: 58.5 cm³- Injection pressure: 1577 bar- Plasticising flow: 8.6 g/s- Injection flow: 85.5 g/s- Connected load: 3x 400 V, 50 Hz- Max. heating power: 5.8 kW- Drive power: 7,4 kW- Total power:  ...

clamping force: 4.000 kNinjection volume: 2.700 cm³screw diameter: -- mmplaten size: -- mmCondition: used,Specification: Rubber Injection Molding Machine - second-handclamping unit:- Clamping force: 4000 kN- ejection device: 2-layer- Brush system: 2-layerInjection unit:- Injection volume max.: 2,700 cm³Two identical systems are available.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

roll diameter: 400 mmroll length: 1000 mmrolls drilled: Kernbohrung Nip adjustment: hydraulisch total power requirement: 45 kWCondition: used, overhauledSpecification: Rolling mill 400 x 1000 mm - second-hand monobloc model, motor under the rollers- roller diameter: 400 mm- roll length: 1000 mm- Rolls: with core bore, with central chamber for water cooling- Fixed friction between the rollers- Rollers mounted on bronze bushes with circulating oil lubrication via pump,- equipped with new Johnson-Fluiten slewing rings, for connection to the water circuit- Gap adjustment: hydraulic, NEW- Hydraulic unit: NEW- Manually tiltable steel guide plates with mechanical safety lock with mechanical safety interlock- Stainless steel roller container for holding the mixture- bi-directional safety bell ...

roll diameter: 660/700 mmroll length: 2100/1800 mmrolls drilled: Kernbohrung nip adjustment: motorisch drive power:: -- kWCondition: usedSpecification: 4-Roll L-Calender - Line - second-hand 4-roll Buzuluk L-calender 700x1800 Mixing mill Buzuluk 660x2100Complete 4-roll L-calender line.The line was used for the production of transparent PVC.However, the basic machines can also be used for rubber.The most important machines in the line:Pos. 8: Liquid mixer make Trusionma hot and coldPos. 10: KO Kneader make BUSSItem 12: Buzuluk 660x2100 mixing roller millItem 14: 4-roll L-calender make Buzuluk 700x1800Items 15-19: Tempering and basin equipment behind the calender Roller conveyorItem 20: Layer thickness profile measuring deviceItem 23: Rewinding deviceThe system was used for transparent soft PVC.Machines are still installed.The data for this ad wa ...

machine measurements: 2.100 x 2.200 x 2.100 mmmachine weight: 2.000 kgpower capacity: 36 kWCondition: usedSpecification: cleaning and degreasing system FIRBIMATIC LOGICA 200V closed cleaning system for the cleaning of of metallic components with highly stabilised perchloroethylene - second-hand- Closed cleaning system for the cleaning of metallic components components with highly stabilised perchloroethylene.- PER-based cleaning and degreasing system Possible cleaning cycles: 1. pre-cleaning (spraying) 2. main cleaning (spray and flood cleaning) 3. rinsing (hosing down) 4. vapour degreasing 5. vacuum drying- All cleaning cycles are freely programmable.- Filling volumes: Tank 1: 170 litres Tank 2: 80 litres- Type of solvent: Perchloroethylene- Total connected load of motors: 9.65 kW- Installed e ...

Numune çapı: - mmNumune uzunluğu: - mmToplam güç gereksinimi: - Makinenin kWağırlığı ca.: - tMakinenin boyutları ca.: - mHacimsel numuneler - kesici / numune zımbası

Dengesiz PCR_Tyres öğütmek için uygun Harmonizasyon makinesi Açıklama ektedir! CE sertifikalı

Press force max.:: 3000 kNheating plates:: 600 x 630 mmelectrically heated:: °Cheating power:: kWpiston stroke:: 420 mmno. of stages:: 1 Condition: Used, reconditionedSpecification: Press 600 x 630 mm, second-hand- clamping force: 300 tonnes (3,000 kN)- closing: from bottom to top- Heating platens: 2 electric platens, with new heating rods- Heating platen dimensions approx.: 600 x 630 mm- Distance between the heating platens approx.: 420 mm- New electric valves- AC machine output oil pump: 5.5 kW- New control cabinet with Siemens 7’ touch panel- PLC control system make Siemens S7-1200- New cabling- Frequency inverter made by Schneider- Light barriers in the front area,Overhauled in accordance with CE standard safety regulationsOperating instructions and maintenance instructions in GermanWarranty: 1 yearThe data for this ad was created with ModulMWS - the sof ...

clamping force: 400 kNinjection volume: 125 cm³screw diameter: -- mmplaten size: 600 x 400 mmCondition: used,Specification: C-frame injection moulding machine for TPV - second-handclamping unit:- Clamping unit: vertical- Tonnage: 40 t- clamping force: 400 kN- Heating platen size: 600 x 400 mmInjection unit:- Injection volume max.: 125 cm³- Connected load: 3x 400 V, 50 Hz 90A fuse protectionApprox. dimensions: 1,550 x 1,050 x 3,120 mmWeight approx.: 2,250 kgTwo identical systems are available.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

clamping force: 400 kNinjection volume: 125 cm³screw diameter: -- mmplaten size: 550 x 400 mmCondition: used,Specification: C-frame injection moulding machine for TPV - second-hand, Modell TTV-C40-125 C40P01Bclamping unit:- Clamping unit: vertical- Tonnage: 40 t- clamping force: 400 kN- Heating platen size: 550 x 400 mmInjection unit:- Injection volume max.: 125 cm³- Connected load: 3x 400 V, 50 Hz 90A fuse protectionApprox. dimensions: 1,550 x 1,050 x 3,120 mmWeight approx.: 3,200 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Press force max.:: 1600 kNheating plates:: 400 x 400 mmelectrically heated:: -- °Cheating power:: 9,92 kWpiston stroke:: 400 mmno. of stages:: 1 Condition: Used,Specification: Press 400 x 400 mm, second-hand steel frame construction- Clamping force: 160 tonnes- pressure force: 1600 kN- Operating pressure: 300 bar- Closing: from bottom to top- Heating platens: 2 electric platens- Heating power: 4.96 kW/platen- Heating platen dimensions: 400 x 400 mm- Specific pressing pressure: 1000 N/cm²- Distance between the heating platens: 500 mm- Piston stroke: 400 mm- Piston diameter: 260 mm- AC motor power: 7.5 kW- Pneumatic protective cover in the front area,- lifting device- Sliding table- Approx. dimensions: 1,760 x 1,150 mm- System height approx.: 2,470 mm- Weight appro ...

clamping force: 200 kNinjection volume: 80 cm³screw diameter: -- mmplaten size: 350 x 300 mmCondition: used,Specification: C-frame injection moulding machine for TPV - second-handclamping unit:- Clamping unit: vertical- Tonnage: 20 t- clamping force: 200 kN- Heating platen size: 350 x 300 mmInjection unit:- Injection volume max.: 80 cm³- Connected load: 3x 400 V, 50 Hz- Pump output: 11 kW- Total output: 44 kWDimensions L/W/H approx.: 2,000 x 1,500 x 2,500 mmSpace requirement approx: 3 m²Weight approx.: 2.500 kgThere is also an identical system as a spare parts dispenser as an optionfor an extra charge. The control panel is missing here.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

clamping force: 400 kNinjection volume: 125 cm³screw diameter: -- mmplaten size: 300 x 300 mmCondition: used,Specification: C-frame injection moulding machine for TPV - second-handclamping unit:- Clamping unit: vertical- Tonnage: 40 t- clamping force: 400 kN- Heating platen size: 300 x 300 mmInjection unit:- Injection volume max.: 125 cm³- Connected load: 3x 400 V, 50 Hz 76A fuse protection (incl. peripherals)- Pump output: 7.5 kW, 14.9 A- Total output: 28 kWDimensions L/W/H approx.: 2,000 x 1,500 x 2,500 mmWeight approx.: 2,250 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

clamping force: 200 kNinjection volume: 80 cm³screw diameter: -- mmplaten size: 350 x 300 mmCondition: used,Specification: C-frame injection moulding machine for TPV - second-handclamping unit:- Clamping unit: vertical- Tonnage: 20 t- clamping force: 200 kN- Heating platen size: 350 x 300 mmInjection unit:- Injection volume max.: 80 cm³- Connected load: 3x 400 V, 50 Hz- Pump output: 11 kW- Total output: 44 kWDimensions L/W/H approx.: 2,000 x 1,500 x 2,500 mmSpace requirement approx: 5 m²Weight approx.: 3.200 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.