kauçuk makineleri kullanılmış satılık (420)

screw ø:: 60 mmscrew length:: 11D screw speedl:: -- U/mindrive power:: 18,5 kWCondition: used, reconditionedSpecification: rubber extruder – used- Screw diameter: 60 mm- Screw length approx.: 11D- New screw- Cylinder refurbishment- Feed roller refurbishment- New safety cage- New rotary joint for water- New AC motor: 18.5 kW- New control cabinet with Siemens S7-1200 PLC system- New control panel with Siemens KTP700 Basic touch panel- New Siemens G120 frequency converter for variable speed- Remote maintenance device- New cabling- Pressure sensors on the extruder head- Safety device- CE marking and an operating and maintenance manual in EnglishRefurbished in accordance with CE standard safety regulationsWarranty: 1 yearOption: TCU for temperature control of the water up to 95°C, for placement near the extruderThe data for thi ...

screw ø:: 90 mmscrew length:: 16D screw speedl:: ca. 40 U/mindrive power:: 48,5 kWCondition: used, overhauled to order, including warranty, including CE markingSpecification: extruder – used with feed roller- Screw diameter: 90 mm- Screw length: L = 12D- Screw speed approx.: 40 rpm- Motor rated power: 48.5 kW- Belt drive, number of belts: 5- Number of heating/cooling zones: 4- Voltage: 3x 380V, 50Hz, NFor further details, please refer to the attachment.Price on request, depending on design and customer requirementsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

roll diameter: 700 mmroll length: 1800 mmrolls drilled: Kernbohrung nip adjustment: motorisch drive power:: -- kWCondition: usedSpecification: 4-roll L-calender 700x1800 - used- BUZULUK 4-roll L-calender 700x1800 Type: 04706/P1- Reverse L-shaped roller arrangement- The system was used for the production of PVC films- Film thickness: 0.05 - 1 mm- Can also be used for rubber- Maximum product width: 1,600 mm- Working speed: 6 - 60 m/min- System features roll bending and cross axis- BUZULUK temperature control and stretching device behind the calender- Year of manufacture: 1996- Consists of 13 stretching and pulling rollers behind the last roller of the calender- The device is supplemented by 4 polishing rolls,- these 4 polishing rolls are temperature-controlled,- all rolls are driven via cardan joints,- all rolls can be temperature-control ...

screw ø:: 30 mmscrew length:: 16D screw speedl:: -- U/minCondition: used,Specification: Extruder - used- screw diameter: 30 mm- screw length: L = 16 D- with feed roller- Extruder water tempered,- Cylinder and head one tempering zone- Feed section can be cooled or heated- Flow rate adjustable- Screw compression approx.: 1:1.2- Spraying head for hoses and profiles- Various injection moulds are available- Extruder complete incl.: - Motor from Techno Drives, type: MD 321 MA Drive power: 5 kW, 360 V Motor current max.: 19.7 A N/max.: 1,750 rpm - Control cabinet mounted directly next to the extruder - Profile/tube extrusion head with clamp - Temperature control Extruder is mounted on a base plate- Mass pressure measurement and display available- Operating and display elements are installed in the switch  ...

machine measurements: B/H/T 925 x 1.750 x 1.500 mmmachine weight: 550 kgpower capacity: -- kWCondition: used, very good conditionSpecification: Pad Printing Machine TPX 501 TFC E sealed Pot System - used only approx. 3 years in useconsisting of:- Pad printing machine with closed ink system cliché size 450 x 220 x 0,7 mm equipped for 4-colour printing Print head with ceramic ring 96 mm incl. machine base (for a description see appendix) - printing capacity max.: 900 - 1.600 prints/hour - Drive TPX: pneumatic - Control: Microprocessor with EPROM - Tampon stroke: electronically infinitely variable programmable - Tampon vertical stroke: max. 160 mm - pad outreach: max. 149 mm - Weight with base: approx. 550 kg - Dimensions W/H/D: 925 x 1,75 ...

chamber volume: - literuseable volume: 1,8 literfriction: - motor drive power: 30 kWCondition: used - refurbishedSpecification: laboratory internal mixer - used- Chamber volume: approx. 1.8 l- Closing system: trap door system- Piston: pneumatic, for filling material- Rotor geometry: interlocking type- Oil seals with pump lubrication- New rotary union for water cooling- New main gearbox- New AC motor: 30 kW- Control cabinet: NEW, with Siemens S7-1200 PLC- Control panel with Siemens KTP 700 Basic touch panel- Cabling: NEW- New Siemens G120 frequency converter for variable speed- New remote maintenance device- Paint finish: according to customer specifications- With safety devices in accordance with applicable standards- Refurbished, with 12-month warranty, CE marking, operating and maintenance instructions in EnglishThe data for this ad was  ...

Yeni Zig-Zag Kesici! Makine, Ekstrüder beslemesi için 800 mm'lik bir Partiyi sonsuz bir şerit halinde kesmek üzere tasarlanmıştır. 12 ay Garanti! Açıklama ektedir!

Key data: 305 mm, 550 mm

mevcut 22" Değirmen Açıklama ektedir!

Key data: 190 mm, 450 mm

mevcut Laboratuvar Değirmeni! Açıklama ektedir !

Key data: 340 mm, 700 mm

mevcut 27" Değirmen Açıklama Ekli!

Key data: 550 mm, 1500 mm

Haddehane 60" Ayrıntılar için eke bakın!

Key data: 550 mm, 1500 mm

1937'de Bata tarafından üretilen 550 × 1500 mm haddehane. Bu tarihi makine tamamen işlevseldir ve hem üretimde hem de sergi eseri olarak kullanılabilir.

Key data: 300 mm, 600 mm

Çap: 300 mm Uzunluk: 600 mm Yüzey: pürüzsüz NIP ayarı: manuel Motor: 30 kW Siemens Boyutlar: yaklaşık 1700 x 1560 x 1635 mm Ağırlık: yaklaşık 3000 kg CE (2018'den itibaren motor, geri vitesli, diz acil durma)

Kapasite 75 kg Çıkış kapasitesi maksimum 800 kg/saat Boş ağırlık: 0,25 - 3100 g

Key data: 400 mm, 1000 mm

Büyüklük 14231 2010 yılında CE dönüşümü Sürtünme önleyici yatak Motorlu: 55 kW Motorlu boÅŸluk ayarı Taban plakasÄ

3-5 makaralı takvim Buzuluk Makara sayısı: 4 adet. Rulo çapı: 150 mm Rulo uzunluğu: 400 mm

400x500 tuşuna basın ZDA yapmak Tip 100660 manuel olarak çalıştırılır elektrikli ısıtmalı plakalar Sıkıştırma kuvveti 1540 kN

Key data: 300 , 600

Makaralar: çap. 300 x 600 mm Silindir yüzeyi: pürüzsüz Rulo Tipi: merkezi olarak delinmiş Boşluk ayarı: Manuel Motor: 22 kW

Laboratuvar dahili mikseri Teğet Oda 2.8 l / Güzel hacim 2 l Kayar kaliper AC motor 22 kW YOC 1971 ·

Teğet Güzel hacim 70 l, katlanır eyer, AC Motor 320 kW / 380V / 50Hz, 1483 RPM YOC 1987 ·

800 x 800 pres, sıkma kuvveti cca 3000kN, elektrikli ısıtma

Pnömatik kauçuk ayırıcı genişlik 550 mm uzunluk 800 mm Bıçak darbesi 280 mm

Kriyojenik çapak alma için küçük kumlama makinesi - MEWO 42

manuel silindir boşluğu ayarı 2x7.5 kW motor Kayar yatak Yağ sirkülasyonlu yağlama ayarlanabilir silindir hızı 10-41 rpm YOC 1990 ·

An injection molding machine Maplan for elastomers requiring repair is available. Design: hydraulic vertical press, hydraulic oil type: ISO VH 46 HLP, hydraulic oil filling quantity: approx. 600l, max. hydraulic pressure: 250bar, heating cartridge diameter: 25mm, insulation plate thickness: 14mm, max. operating temperature: 250°C, L/D ratio: 12:1, max. back pressure: 400bar, max. stroke: 260mm, vacuum pump capacity: 63m³/h, weight: approx. 17500kg, control system: B&R PLC. The temperature control units and the hydraulic clamping system have failed. Documentation available. An on-site inspection is possible.

Test plakaları için laboratuvar presi, RUCKS üretimi, 1998'de üretilmiş, 2 kat elektrikle ısıtmalı, Pres kuvveti 440 kN, maksimum çalışma basıncı 250 bar

Key data: 10 liter, 8 liter, 1

Mevcut 10L tangential mikser Açıklama ekli!

Üst ve alt pudra için 1000 mm geçit genişliğine sahip Fabikat PEKU toz makinesi Plakalar, profiller, hortumlar vb.

EEK 125.22 V yedek parçalarının satışı; vakum silindiri, vida ve V-pompa, 6 x TCU, 165 KW FU gücüne sahip güç kabini

Sunulan bir kauçuk enjeksiyon makinesi Klöckner DESMA şirketidir; strok hacmi 1600cm³, sıkıştırma kuvveti 2500kN, enjeksiyon basıncı 2078bar, makine ağırlığı yaklaşık 11000kg. Sahada ziyaret düzenleme ile mümkündür.