diğer metal çalışma makineleri kullanılmış satılık (10,898)

bed length: 2790 mmbed width: 2 x 240 mmbed height over floor: - total power requirement: 0 kWweight of the machine ca.: 5,6 tdimensions of the machine ca.: 3,51,61,6 mNo. 03022-station end trimming machine /cutting and centering machineEMAG, type TEC 2/1000 SSIEMENS System 3 controlWorking area: diam. 6.3-25 x 180-1000 mm, drive power: 12.5 kWAccessories:Loading gantry, chip conveyor, coolant device, internal coolant supply for station 1.coolant supply for station 1.The machine is equipped with 4 spindles, which are steplesslyinfinitely variable from 500-5000 rpm via separate DC motors.adjustable. Processing options: Grooving, peeling,turning, drilling (thread), thread chasing, chamfering, countersinking.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

square edge steel: 16 x 16 mmflat steel: 100 x 5 mmL-beam: 60 x 8 mmround bar steel: 18.0 mmweight of the machine ca.: 33.0 kgProperties :- For precise cold and hot bending of flat, round and square steels- Sturdy design for bolting to the workbench- Infinitely adjustable bending stop with locking pin- With eccentric quick clamping for efficient working- Readable bending angle up to 120- High repeat accuracy thanks to bending angle stop- Ideal for repair workshops and locksmiths- - - - - - - - - -Cold bending capacityFlat steel 100 x 5 mm 65 x 10 mmRound steel 18.0 mmSquare steel 16 x 16 mmAngle steel 60 x 8 mmBending capacity hotFlat steel 100 x 15 mm 75 x 20 mmRound steel 27.0 mmSquare steel 25 x 25 mmAngle steel 100 x 12 mm- - - - - - - - - -Scope of delivery:- Bending plate sharp / round- Radius bending plate R 20 / R 25- Offset block- Bending plate for round bar- Offset plat ...

turning diameter: / mmturning length: / mmworkpiece length: / mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 3048 mmtable width: 1524 mmburner heads: 1 Control: CNC workpiece weight: 1450 kgtraversing speed: 200 m/minweight: 5010 kgdimensions of the machine ca.: 9450 x 2240 x 2520 mmLaser cutting machine with automatic shuttle tableConfiguration1. BodorPower laser source 12 kW2. BodorGenius laser cutting head with autofocus3. BodorThinker 3.0 control system4. Bed made of tenon and mortise structure5. Stretched aluminum portal6. One-click fully automatic processing7. Automatic layout of residual material8. Edge detection and automatic zeroing of the focal length throughintelligent detection9. Bodor Lightning perforation technology10. 21.5-inch monitor with touch function11. Intelligent control of gas pressure12. Automatic adjustment of cutting gas pressure13. Bodor Mango® ergonomic remote control14. Active anti-collision function15. Intelligent vibration protection16. Intelligent  ...

pulling force - max.: 16 tbroaching length max.: 1250 mmtable width: 400 mmbroaching speed: 1...6,4 m/minreturn speed: 19,5 m/mintool length - max.: 1500 mmtotal power requirement: 42 kWweight of the machine ca.: 16 tdimensions of the machine ca.: mSpecification: 2- jobs broaching right or left /right and left at the sametime Pulling force: max. 16 tMax. stroke length: 1,250 mmTable width: 400 mmBroaching speed: 1.0 – 6.4 m/minReturn speed: 19.5 m/minMax. tool length: 1,500 mmTotal power requirement: 42 kWMachine weight: approx. 16 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

degree: 500 working heigth: - mmlength: 600 mmwidth: 600 mmdepth: 600 mmtotal power requirement: 21 A / 14,5 kWweight of the machine ca.: 0,5 tdimensions of the machine ca.: 1 x 1 x 2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

feed pressure: 8 barliter capacity: 1,65 m³ / mindimensions: 1000 x 750 x 950 mmtotal power requirement: 11 kWweight of the machine ca.: 175 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

total power requirement: 38 kWdegree: 500 Gradweight of the machine ca.: 2,5 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

working area L-W-H: 10001150850 mmmanual operated rotary table: Ø accessories and equipment:: Absaugung Number of working hours: 600 hvoltage: 400 Vtotal power requirement: 0,4 kWweight of the machine ca.: 0,5 tdimensions of the machine ca.: 222,6 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Best. Continuous chain conveyor approx. 1,000 mm wide, manual feed station, 1 washing station approx. 1,000 mm, 2 rinsing stations each 1,000 mm, 1 drying station approx. 1,000 mm, 1 reject station, control system, bottom drip tray, Technical data, Technical data Electrical connection 400 V, zero (0) and earth (PE), at 50 Hz Connection fuse max. 400 A depending on the laid supply cable Maximum current consumption approx. 250 A Maximum power consumption approx. 85.4 kW Washing zone Pump type Lowara SVI 1603/07S30T Electrical connection 400 V, zero (0) and earth (PE), at 50 Hz Tank capacity 1050l Pump motor power 3 kW Pump delivery 390 l/min Heating capacity 45 kW (5x9 kW) Flushing zone 1 Pump type Lowara SVI 1603/07S30T Electrical connection 400 V, zero (0) and earth (PE), at 50 Hz Tank capacity 1050l Pump motor power 3 kW Pump delivery 390 l/min Heating capacity 36 kW (4x9 kW) Flushing  ...

dimension of workpiece: - mmvoltage: - Vaccessories and equipment:: ASUS All-in-One PC total power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: - mhttp://www.ibendorf.de/ecmc.htmlThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 1310 mmcutting diameter: 440 mmstroke: / mmweight of the machine ca.: 7,5 tSaw blade diameter: 1310 mm Cutting diameter: 440 mm Machine weight: approx.: 7.5 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1,500 MM MEASURING RANGE, WITH WOODEN BOX Auction-ID: A1-49210-240

groove width: 3 - 50 mmdrawing length: 315 mmworking speed: 3 - 15 m/mintotal power requirement: - kWweight of the machine ca.: 1 tdimensions of the machine ca.: 1,5 x 1 x 1,6 mNo. 3327:wedge and keyway drawing machinemanufactured by WGW, type NZM 50/330Accessories:8 drawing tools: 1 x 8 mm / 2 x 10 mm / 1 x 21 mm / 4 x 22 mmWorking speed 3-14.7 m/minGroove width 3 - 50 mmGroove length up to 315 mmSpace requirement 1.5 x 1.0 x 1.6 mWeight 800 - 1000 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

volume capacity: - m³ / hPressure power: 7,5 barReceiver capacity: 1000 lpower requirement: 11 kWPacking: ? mShipping weight: ? ca. 600 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 160 tchamfer lenght: 3000 mmdistance between columns: 2650 mmControl: Cybelec DNC 800 total power requirement: kWweight of the machine ca.: 16 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control: / The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 1200 mm0: 800 mmUsed, well-preserved pallet frames with galvanized corner hingesavailable for the formats 1200 x 800 mm and 800 x 600 mm.Price for each item EUR 15,-The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 25 tstroke: 250 mmtable-size: 400 x 500 mmsurface of ram: 200 x 500 mmweight of the machine ca.: 0,9 tdayligth: 400 mmdistance between columns: 500 mm- Handspindelpresse, gebrauchtBalancier, usedTyp/ type: PSHZ 25/IPreßkraft / rated pressure: 25 tHub/ stroke: 250 mmTischgröße/ table size: 400x 500 mmStössel/ ram: 200 x 500 mmTischöffnung / hole in table: 140 mmGewicht/ weight: 0,9tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 780 mmtable width: 500 mmampere: - AControl: Heidenhain 121 total power requirement: - kWweight of the machine ca.: 3,5 tdimensions of the machine ca.: 2 x 2 x 2 mNo. 1564Die-sinking EDM machine HANSEN 750 Smax. workpiece weight 100 kgWorking area: 500 x 300 x 375Control: Heidenhain TNC-121 Eropuls NC-2000Table 780 x 500 mmSpace requirement approx. 2 x 1.5 mWeight approx. 3.7 tonsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 6 mmtotal power requirement: 3 kWweight of the machine ca.: 1,05 twork table:: 1000 x 800 mmKnife length: 205 mmdimensions of the machine ca.: mpressure: tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 3048 mmtable width: 1524 mmburner heads: 1 Control: CNC workpiece weight: 911 kgtraversing speed: 180 m/minweight: 4150 kgdimensions of the machine ca.: 9392 x 2232 x 2307 mmLaser cutting machine with automatic shuttle tableConfiguration1. Bodor Power 3kW laser source2. Bodor Genius laser cutting head with autofocus3. Bodor Thinker 3.0 control system4. Mortise-and-tenon type plate welded segmented bed5. Stretched aluminum gantry6. Bodor servo motor and driver7. Bodor rack and pinion8. One-click processing9. Bodor Lightning perforation technology10. Expert database for high-speed cutting11. Automatic cutting gas pressure adjustment12. Open door protection13. Cutting malfunction alarm function14. Ergonomic remote control (Bodor Mango®)15. Active anti-collision function16. Intelligent anti-shake17. Gas-saving continuous flow nozzle18. Intelligent maintenance reminder19. WIFI  ...

pressure: 250 tthroat: 400 mmstroke: 30...140 mmtable-size: 1000 x 750 mmhole in the table: 360 x 400 mmram surface: 630 x 500 mmram adjustment: 110 mmtotal power requirement: 18 kWweight of the machine ca.: 16 tPress force: 250 tThroat depth: 400 mmStroke: 30 – 140 mmTable size: 1,000 × 750 mmTable opening: 360 × 400 mmRam face: 630 × 500 mmRam adjustment: 110 mmTotal power requirement: 18 kWMachine weight: approx. 16 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

inner taper of milling spindel: SK 40 collet diameter: - turning speed range: Maschinenabhängig U/mindrive motor: Antrieb durch Maschine kWdistance spindle - column: ca. 800 mmtotal power requirement: - kWweight of the machine ca.: 0,4 tdimensions of the machine ca.: 1,2 x 0,8 x 0,8 mNo. 4896:Vertical milling head SK 40Make COLLET + ENGELHARD, mod. BN 100 ( BFfb 85 / 110 )Support bearing2 set of bevel gearsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Diameter: 230 mmtable diameter: 500 mmworkpiece height: 150 mmweight of the machine ca.: 2 tdimensions of the machine ca.: 2 x 1.2 x 2.2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Max. pressure: 8 barcontrol voltage: 24 Volttotal power requirement: 15 kWNumber of working hours: 20.563 h- Maximum pressure: 8 bar- Delivery quantity: 2,57 m³ / min- Nominal power: 15 kW- Control voltage: 24 VoltThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Max. pressure: 8 barcontrol voltage: 24 Volttotal power requirement: 15 kWNumber of working hours: 39.819 h- Maximum pressure: 8 bar- Delivery quantity: 2,57 m³ / min- Nominal power: 15 kW- Control voltage: 24 VoltThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 18 / 23 mmbore depth: 100 mmthroat: 240 mmSpindle Speed: 250 - 4000 U/min.table surface area: 340 x 280 mmmachine weight ab.: 205 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

band width: 500 mmband speed: 8-25 m/minplate thickness: 0,5-2 mmtotal power requirement: 2,2 kWweight of the machine ca.: 0,75 tStrip width: 500 mmStrip speed: 8 – 25 m/minSheet thickness: 0.5 – 2.0 mmTotal power requirement: 2.2 kWMachine weight: approx. 0.75 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thread dia.: 12 mmstroke: / mmtable-size: / mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.