delik işleme değirmenleri işleme merkezleri kullanılmış satılık (563)

machine Manufacturer: Chiron Werke Tuttlingen Type: FZ 16 L CNC Serial Number: 125-86 Hours: 8041 h data Table height (mountable): 860→190 mm; 810→240 mm; 760→290 mm; 710→340 mm Chip conveyor: Discharge height 850 mm Number of magazine slots: 32 Max. tool Ø: 80 mm (full) / 100 mm (free) Tool change time: approx. 1.5–2.0 s Cut-to-cut time: approx. 3.9 s Drilling capacity in St 60: Ø 24 mm Tapping capacity: M20 Milling capacity in St 60: up to 40 cm³/min Milling capacity in Al: up to 400 cm³/min Increment: 1.12 Spindle bearing Ø: 50 mm Tool Clamping: Mechanical Pull-in force: 8000 N Feed forces: Z 3000 N; X/Y 6000 N Rapid speeds (X/Y/Z): 15 m/min Programmable feed: 1–4000 mm/min If you have any questions, please contact Project Manager Dustin Richter by phone at +49 1709792229. Pick-up from week 45 Auction-ID: A7-44241-131

-Flexible CNC plate machining center -The machine consists of two processing units (top, bottom) -Equipped with a total of 82 individually retrievable tools -The skipper is able to process two workpieces at the same time from above and below -Dimensions according to data sheet -Work and pressure table -Side work tables -Stop system -Electronic control of workpiece thickness -Digital drives -Central lubrication -Control -Automatic discharge with belt -Air cushion table -Bottom processing unit-Left slot -Upper processing unit-Left slot -Bottom processing unit-Right slot -Upper processing unit-Right slot -Horizontal glue dowel insertion unit for dowels with 8 mm diameter -Surveying system - NC-HOPS programming system -Version with left-hand automatic feed feed -Horizontal drilling and milling Auction-ID: A7-43964-13

Horizontal Automatic Multi-Spindle Drill with 34 Spindle Holders Auction-ID: A1-43330-17

Spindle speed: 18,000 rpm Tool magazine: 50 tools Tool holder: SK25 Working area (X × Y × Z): 400 × 250 × 350 mm Auction-ID: A7-43759-1

Automatic horizontal and vertical multi-spindle drill with 2 horizontal heads 21 spindles each, 3 vertical supports with 2 x 9 spindles and 1 x 15 spindles. Auction-ID: A1-43330-9

BIESSE 3-axis machining center, equipped with a magazine with 7 spindle slots with a maximum diameter of 160mm. All measurements are photographed in the technical documentation. Please see the photos for all the technical information. The Rover 30 is equipped with a detection mat to ensure the safety of the operator during use, a RIETCHIE MACRO vacuum pump, Sold with control cabinet, wooden cabinet with contents, spindle support trolley, rolling workbenches. Auction-ID: A1-43330-3

Number of tool positions: 12 Software: XILOG Sawing unit: 120 mm in X-direction Travel speed max. X-axis: 40 m/min Travel speed max. Y-axis: 60 m/min Travel speed max. Z-axis: 22.5 m/min vacuum pump C-axis Working width Y-axis max.: 1550 mm Working height Z-axis max.: 130 mm Working length X-axis max.: 3660 mm Drill heads horizontal X-axis: 4 Drill heads horizontal Y-axis: 2 Drill heads vertical X-axis: 7 Drill heads vertical Y-axis: 5 Capacity per vacuum pump: 100 m/h Auction-ID: A7-43586-6

Without control screen, to be controlled, sold with cabinet Auction-ID: A1-43330-46

5-axis machining center with integrated edge banding from BIESSE. This machining center can work workpieces with maximum dimensions of X:4320mm Y:1620mm Z:200mm. The maximum speeds are: X: 83 m/min Y: 60 m/min Z: 20-30 m/min depending on drilling or milling type The compatible pin types are identified in the technical documentation which is pictured. the set is sold with the BUSCH type MM 1252 A VV3 vacuum pump with a maximum capacity of 290 m3/h. The set is sold with protective grilles, protective beam barriers, furniture with contents. Auction-ID: A1-43330-1

çelik delik kapasitesi (çap): 32 mmKısa mil: MK 3 delik derinliği: 175 mm mil boğaz: 320 mm sütun çapı: 130 mm mesafe mil / tablo: 140-790 mmfeed: 0,1 - 0,16 - 0,25 m/en az mil hızı: 60-1600 makinenin ağırlığı yaklaşık 450 kgBu reklamın verileri, LogoTech oHG'nin yazılım çözümü ModulMWS ile oluşturulmuştur.

BREMA – Numerically controlled vertical machining centre, model REM 400 3/15, designed for processing of panels and joinery components, in particular the manufacture of doors. The bundle includes: Vertical center with inlet carriage Separator and tipper Distribution belt 250 x 250 mm Aluminium SCBA turner SCBA Separation System Internal number: NR07 REM/4 – Integrated complete line for continuous cycle. Touchscreen control station with mobile console. Compact architecture, ideal for optimising floor space in the workshop. 2 full trucks Auction-ID: A1-43385-414

Working dimensions: 4,400 x 1,300 mm Features: - Overhead tool changer - Drilling, milling and grooving functions Voltage: 380 V Transport: 1 full truck required (6,000 kg) Auction-ID: A1-43385-413

3 axes – drilling – routing – grooving Numerical control Auction-ID: A1-43385-9

Number of axes: 3 Working area: 4,700 x 1,300 mm Serial Number: 5626 Table Type: Full Table Tool changer: Yes, with 12 tool holders Spindle: 10.3 kW, 3-axis spindle Spindle drive: Yaskawa Varispeed X, Y, Z axis drives: Yaskawa SGDH Servopack Vacuum system: 2 vacuum pumps for two workstations Cooling: 1 spindle cooling unit Conditions of transport: Full truck required Auction-ID: A1-43385-404

HOMAG PROFI BOF311/60/F/KC 5 axis processing centre↵↵• Fully automatic CONSOLES - CLAMPING TABLE KC↵   - 10 clamping consoles with automatic positioning unit↵   - 30 automatically positionable platforms for holding the vacuum clamps↵   - 4 lifting rails attached to the side of the consoles↵↵•  5 axis main spindle 15 kW liquid cooled.↵    - Speed range continuously programmable from 1000 - 24000 rpm.↵↵• Drive 5+ unit interface for the use of machining units. ↵↵• Drilling head 17 spindles vertical↵ - 1 motor 2,7 kW, frequency controlled Speed max. 7500 1/min↵ - 7 spindles vertical in X-direction↵ - 11 spindles vertical in Y-direction↵- 4 spindles horizontal drilling and sawing unit↵↵•  Chain changer for 30 tool / unit positions with upstream double gripper for  ...

Work Operations: Drilling, Saw Blade, Grooving Working area: 1,400 x 750 mm Control: CNC – 3-axis Included: 1 control box Auction-ID: A1-43385-402

Drilling head Multi-spindle horizontal variable centre distance 1 pneumatic cylinders Parts Pressers 1 pedal to trigger Drilling and clamping Auction-ID: A1-43385-22

Number of axes: 3 axes digitized Working area: 2,500 x 1,200 mm Tool changer: 4-position automatic changer Work Operations: Drilling Milling Grooving Included Items: 1 independent control cabinet 1 vacuum pump Machine dimensions: Length: 4 m (5 m with electrical cabinet) Width: 3.20 m (4.20 m with safety mat) Height: 2.40 m Weight: 2,000 kg Transport dimensions: 4,500 x 2,000 x 2,500 mm Approximate transport weight: 3,000 kg Auction-ID: A1-43385-407

Serial Number: 0-390-07-0065 Control system: Digital control with Intel Pentium III processor (850 MHz) Number of axes: 5 Machine features: 1 milling motor – 7.5 kW 1 swivel sawhead (360°) – 5.5 kW Without tool changer Integrated inkjet printer Automatic wood clamping system Introducer and transfer line with 1 automatic stop (minimum 6 m) Documentation Included: Instruction Manual and Electrical Diagram Transport conditions: Full truck with 6 linear meters of loading Overall dimensions: 19,500 x 2,500 x 3,000 mm Weight: 7,000 kg Restriction on sale: The machine can only be sold within European countries Auction-ID: A1-43385-405

Auction-ID: A1-43385-26

working length X: 1.600 mmworking length Y: 800 mmworking depth Z: 190 mmWorkpiece dimensions: mmWorkingpiece thickness from to: mmMotor output: 2,2 kWNumber of axles: St.Number of milling agregates: St.Number of heads vertical: St.Number of heads horizontal: St.Overall size: mmWeight: ca. 450 kgYear: 2018 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2000 mmtable width: 1250 mmstroke height: 1300 mmweight max. in kg: 1000 kgdayligth: 300 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

çelik delik kapasitesi (çap): 10 mm delik derinliği: 50 mmboğaz: 180 mm0: 250 - 3000 U/minilebilir yüzey alanı: 300 x 200 mmmakine ağırlığı kar.: 30 kgBu reklam için veriler, LogoTech oHG'nin yazılım çözümü olan ModulMWS ile oluşturulmuştur.

Machine No. 425505,Main spindle 5-axis with motor approx. 11 KW (mounting ISO 40,speeds approx. 1000 - 18000 rpm,A-axis approx. +/- 270°,B-axis approx. +/- 95°),Tool changer approx. 24-fold,Y-axis travel approx. 6000 mm,X-axis travel approx. 2300 mm,Z-axis travel approx. 300 mm,Brackets 12 pieces with length approx. 1600 mm,ceiling laser,Moroff control renewed 2020 Net investment sum 122,000,- EUR with touch display, accessories see pictures(The article is in condition as existing and unchecked. The item is sold from the foundation!) Auction-ID: A7-43232-60

Highlights • 3 x HELLER MCi 25.1 – 4-axis horizontal machining centres (model years 2004–2006, SN 31-46620, 31-47268-00, 31-46240-00) • Integrated SCHULER FMS Light 1200-2 pallet changing system (built in 2008) • Control: SIEMENS Sinumerik 840D • Tool holder: HSK63 (2 machines), SK40 (1 machine) • KNOLL cooling systems and chip conveyors on all machines Travel Paths & Feeds • X / Y / Z axis: 800 / 800 / 800 mm • Feed range (specified for one machine only): 1 – 60,000 mm/min Tool Changer • Machine 1 (2006): 372 seats • Machine 2 (2005): 160 seats • Machine 3 (2004): 160 seats • Max. tool weight: 12 kg Rotary table B-axis • Max. speed: 40 rpm Workpiece Capacity & Table Size • Max. workpiece weight: 800 kg • Table size per machine: 630 x 500 mm SCHULER Pallet Changing System FMS Light 1200-2 • Year of construction: 2008 • Control: SIEMENS  ...

Highlights • 1 x HELLER FP 2000 – 5-axis horizontal machining center (2010, SN 49995) • 1 x HELLER H2000 – 4-axis horizontal machining center (2013, SN 52728) • Integrated FASTEMS FPC 750 pallet automation with 24 memory locations and 2 set-up stations • Control: SIEMENS Sinumerik 840D / 840D sl • Tool holder: HSK63 • Spindle speed up to max. 16,000 rpm • Tool locations: 240 (FP 2000) and 408 (H2000) • KNOLL cooling systems and chip conveyors Traverses & Rapid Traverses • FP 2000 (X/Y/Z): 630 / 630 / 830 mm • H2000 (X/Y/Z): 630 / 630 / 630 mm • Rapid traverse FP 2000: 60 m/min • Rapid traverse H2000: 90 m/min Tool Changer • FP 2000 tool positions: 240 • Tool positions H2000: 408 • Max. tool length: 350 mm • Max. tool diameter: 160 mm • Max. tool weight: 12 kg Workpiece capacity • Max. workpiece diameter: 720 mm • Max. workpiece height: 100 ...

Çelik delik kapasitesi (çap): 20 mm boru strok: 150 mm, boğaz: 285 mm: 2 hız: 150 - 3000 U/min. kağı: 1700 kgMakinenin ölçüleri yaklaşık 1600 x 700 x 1850 mmEkipman:- 3 sondaj ünitesi olan sıralı sondaj makinesi - sağ/sol dönüşlü 1 sondaj başı- Soğutma sıvısı cihazı- matkap makinesi Bu reklamın verileri, LogoTech oHG'nin yazılım çözümü ModulMWS ile oluşturulmuştur.

x-travel: 1100 mmy-travel: 650 mmz-travel: 600 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mCNC control Sinumerik 828D2-axes dividing head (4th and 5th axis)electronical hand wheel24-fold automatic tool changercoolant through spindle devicechip screwmeasuring feelerTechnische Daten / technical details:Verfahrweg X / X-Travel 1100 mmVerfahrweg Y / Y-Travel 650 mmVerfahrweg Z / Z-Travel 600 mmTischgröße / table size 1300x600 mmWerkzeugschaft / spindle taper SK40 Drehzahlbereich / spindle speed 8000 UpM /rpmAnzahl der Werkzeugplätze / tool places in ATC 24 Eilgang X,Y,Z / rapid feed X,Y,Z 15,15,15 m/minGewicht der Maschine ca. / weight ca. 7400 kgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -Technical data, accessories and description of the machine are not ...

bore capacity in steel St 60: 25 mmbore capacity in cast iron GG 20: 30 mmDrilling capacity in St 60: 30 mmthreading in St 60: M 16 threading in GG 20: M 20 Short spindle: MK 3 spindle stroke: 140 mmthroat: 293 mmcolumn diameter: 115 mmMachine table - usable table surface: 514 x 360 mmT-Slots Amount - Width - Distance: 2 x 14 x 224 mmDistance spindle-table min.: 132 / 724 mmfeed: von Hand spindle turning speed - stepless: 100 - 1.800 U/mintotal power requirement: 1,0/1,6 kWweight of the machine ca.: 260 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel St 60: 25 mmbore capacity in cast iron GG 20: 30 mmDrilling capacity in St 60: 30 mmthreading in St 60: M 16 threading in GG 20: M 20 Short spindle: MK 3 spindle stroke: 140 mmthroat: 293 mmcolumn diameter: 115 mmMachine table - usable table surface: 514 x 360 mmT-Slots Amount - Width - Distance: 2 x 14 x 224 mmDistance spindle-table min.: 132 / 724 mmfeed: von Hand spindle turning speed - stepless: 225 - 4300 U/mintotal power requirement: 1,0/1,6 kWweight of the machine ca.: 260 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.