Atölye bankları (104)

with contents, 2 vices 125 mm, 3 pull-outs Auction-ID: A1-46480-2370

Without content Auction-ID: A1-46480-3043

Auction-ID: A1-46480-2364

with contents, 1 vise 125 mm, 3 pull-outs, perforated plate rear wall Auction-ID: A1-46480-2373

1 vice 125 mm, 2 pull-outs, perforated plate back panel Auction-ID: A1-46480-2378

1 vice 125 mm, height-adjustable, 3 undermount drawer cabinets with 3 pull-outs each, with contents, 3 drawers Auction-ID: A1-46480-2391

with contents, 1 vise 125 mm, height adjustable, 6 pull-outs Auction-ID: A1-46480-2362

1 vice 125 mm, 1 pull-out Auction-ID: A1-46480-2380

with content, 1 vice 125 mm, 1 pull-out Auction-ID: A1-46480-2375

1 vice 125 mm, 3 pull-outs Auction-ID: A1-46480-2384

Perforated sheet metal rear wall Auction-ID: A1-46480-2372

content included Auction-ID: A7-46300-386

With contents and swivel chair, without liquids Auction-ID: A7-46300-127

Work table with solid wooden top and screwed steel base. Wooden panel with signs of wear and scratches, but stable and without structural damage. Frame with typical wear from workshop use. Overall, solid and operational.Dimensions: approx. 100 × 70 × 85 cm (L × W × H)Table top: solid wood, gluedFrame: steel, lacqueredConstruction: four-legged frame with cross struts Auction-ID: A7-46417-28

Equipped with adjustable legs, tubes for forklift spoons Auction-ID: A1-41682-132

\"WINI Desk / Work Table \"Form 2000\" – 160 x 80 cm – with permanently installed undermount cabinet Equipment: • Sturdy steel frame • Permanently mounted undermount cabinet with several drawersCondition:Used, with signs of wear and tear due to age and use (slight scratches, discoloration).Scope of delivery: • Desk incl. permanently installed undermount cabinet • Sale without pictured contents / tools / decoration • Dimensions: approx. 160 x 80 x 72.5 cm • Manufacturer: WINI Office Furniture • Model: Form 2000 • Colour: light grey table top, grey frame, beige undermount cabinet\" Auction-ID: A7-46417-306

\"Heavy workbench 2000 x 700 mm with 6 drawers and cabinet and Sandvik Coromant Capto C6 clamping block / pick-up blocktype: 391.530-C6Use: For securely holding and fixing Coromant Capto C6 tool holders (e.g. for presetting, storage or workbench mounting).Stable industrial workbench with solid wooden worktop. Design: • 1-door base cabinet left • 6 drawers right (3 + 3) • Sheet steel body • Solid wood worktopDimensions: 2000 x 700 x 860 mmCondition:Used with clear signs of use.Worktop with pressure marks, scratches and wear on the edges. drawers functional. Without content and without keys.Overall dimensions: approx. 2000 x 700 x 860 mm (L x D x H)Type: Steel substructure with wooden topColour: Body light grey / Front turquoise\" Auction-ID: A7-46417-376

\"Workbench / laboratory bench 1100 × 500 × 750 mm – with 4 drawers – without contentsWorkbench or laboratory bench in solid design. Robust worktop • Right side with 4 metal drawers • Left side open (legroom / device storage) • Sheet steel body • Powder-coated surface Dimensions (approx.):Width: 1,100 mmDepth: 500 mmHeight: 750 mm\" Auction-ID: A7-46417-305

Workbench with wooden top, drawer cabinet and Sandvik holderEquipment / Scope of delivery:Workbench with wooden worktopUndermount drawer cabinet (ROUGH, 3 drawers)Back wall / perforated wallSANDVIK Coromant holder C8 (yellow tool holder as in the photos)Notes:Traces of use presentNo other accessories included, if visible in the pictures = sale without contents!Dimensions (L × W × H): approx. 150 × 90 × 84 cm (+45 cm back wall)Manufacturer of drawer cabinet: RAUNumber of drawers: 3 piecesMaterial Worktop: Wood, usedCondition: Used, functional Auction-ID: A7-46417-7

\"Workbench with drawers – approx. 2000 x 700 x 820 mmWorkbench in heavy design with robust worktop and integrated drawers.The workbench is ideal for workshop, assembly or production. Equipment: • sturdy, heavy version • several drawers with storage space • large work surface • industrial constructionCondition: • Used • Dimensions: approx. 2000 x 700 x 820 mm • Type: steel construction • Worktop: wood (heavily used, but functional) • Drawers: several (integrated on the side)\" Auction-ID: A7-46417-408

\"PALMBERG Desk / Work Table – 160 x 80 cm – with permanently installed undermount cabinet Equipment: • Sturdy steel frame • Permanently mounted undermount cabinet with several drawersCondition:Used, with signs of wear due to age and use (slight scratches, discoloration).Scope of delivery: • Desk incl. permanently installed undermount cabinet • Sale without pictured contents / tools / decoration • Dimensions: approx. 160 x 80 x 72.5 cm • Manufacturer: PALMBERG\" Auction-ID: A7-46417-307

Without support, only the workbench Auction-ID: A1-46315-57

Including content, but excluding items on top Auction-ID: A1-46315-32

Including contents and attached vise, jaw width: 125mm Auction-ID: A1-46315-59

Auction-ID: A1-46315-31

Including support, contents and tool holder Auction-ID: A1-46315-4

Including print run and contents Auction-ID: A1-46315-3

Auction-ID: A1-46315-79

Included content Auction-ID: A1-46315-28

Including contents, without attached microscope and TESA altimeter! Auction-ID: A1-46315-29

Auction-ID: A7-46309-2

Contents consisting of files, screwdrivers as well as pneumatic and press accessoriesAttention: the bench drill stored on the workbench is not included in the scope of delivery! Auction-ID: A7-46287-36

Auction-ID: A7-46287-159

two pieceswithout contentsDimensions per workbench: approx. 1450 x 710 x 860 mm Auction-ID: A7-46287-178

with stock of taps, as well as other workshop supplies Auction-ID: A7-46287-16

Equipped with: (3x) measuring and setting equipment. Auction-ID: A1-45979-32

consisting of three piecesincluding hand tools and a hand drillAttention: the two machines stored on the workbench are not included in the scope of delivery! Auction-ID: A7-46287-50

Contents consisting of an attached vice, jaw width: 150 mm, a final measure box from the manufacturer HITEC, measuring range: up to 100 mm, a metal pen, two other vices, jaw widths: 110 and 90 mm, twist drill, a sheet metal shear PEDDINGHAUS, cutting length: approx. 100 mm and other workshop supplies Auction-ID: A7-46287-91

Contents consisting of various hand toolsTable dimensions: approx. 2000 x 710 mm Auction-ID: A7-46287-192

incl. Two vicesone jaw width: approx. 115 mm and one approx. 80 mmTable dimensions: approx. 1450 x 710 mmimportant note: the bench drill seen on the table is not included in the scope of delivery! Auction-ID: A7-46287-177

Content consisting of various connecting elements and other workshop suppliesImportant note: the two pneumatic presses are not included in the scope of delivery!Table dimensions: approx. 1500 x 710 mm Auction-ID: A7-46287-221

with stock of open-end wrenches, hammers and other workshop accessoriesAttention: the bench drill lying on the shelf is not included in the scope of delivery! Auction-ID: A7-46287-34

with stock of milling cutters and tapsAttention: the bench drill stored on the table is not included in the scope of delivery! Auction-ID: A7-46287-15

Auction-ID: A7-46287-138

Auction-ID: A7-46287-158

Content consisting of twist drills and thread formers and other workshop supplies Auction-ID: A7-46287-41

with stock of taps, twist drills and other workshop suppliesAttention: the two bench drills stored on the workbench are not included in the scope of delivery! Auction-ID: A7-46287-38

consisting of a demagnetizing devicedimensions of the storage area: 170 x 180 mma divider from the manufacturer EMCO with three-jaw chuck, diameter: 120 mm and an attached vice, jaw width: 110 mmalso filesAttention: the cut-off grinding machine stored on the workbench is not included in the scope of delivery! Auction-ID: A7-46287-87

Content consisting of various hand toolsimportant note: the small machines that may be seen on the table are not included in the scope of delivery!incl. mounted vise, jaw width: approx. 115 mmTable dimensions: approx. 1500 x 710 mm Auction-ID: A7-46287-224

Content consisting of pneumatic toolTable dimensions: approx. 1500 x 710 mm Auction-ID: A7-46287-203