Bükme presleri (145)

Özellikler: - çalışma uzunluğu 3500 mm - Stand geçidi 3050 mm - Maksimum basma kuvveti 2000 kN - Mesafe tablosu / ram maks. 480 mm - Stand projeksiyonu 260 mm - Ram vuruşu yaklaşık. 300 mm - Kaldırma hızları - Downspeed rölanti maks. 100 mm/sn - Boost hızı 80 mm / sn - Aşağı doğru basma hızı maks. 10 mm/sn - Toplam tahrik gücü 25 kW - Alan gereksinimi yaklaşık. G 4500 x Y 3150 x D 2100 mm - Ağırlık yaklaşık. 16000 Kg -ile: - CNC kontrol CYBELEC 2008 yılında yenilendi - kontrollü taç giydirme cihazı - 5 - 1000 mm yükseklik ayarlı kontrollü arka gösterge - hidr. Takım bağlama - Üst takım + üniversal kalıp aleti - Malzeme gereksinimleri - Çift el kontrol paneli

pressure: 125 tchamfer lenght: 3200 mmdistance between columns: 2700 mmthroat: 350 mmmould space: 395 mmstroke of upper beam: 160 mmwork height max.: 900 mmworking feed: 9 mm/secreturn speed: 90 mm/sectotal power requirement: 11 kWweight of the machine ca.: 8,6 tdimensions of the machine ca.: LBH 3,3 x 1,7 x 2,54 m-Electronic position display-Motorized backgauge-Crowning system-Upper tools as shown-x-bending die-Lazersafe safety system-Foot pedal-Operating manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pres fren Bükme makinesi Pres fren kullanılan Üretici: Mengele Tipi: C320-4B Yapım Yılı: 1966 Son revizyon ve onarım: 2000 Konum D-01587 Riesa Boyutlar GxY: 6,250 x 3,650 mm Kenar bıçağı genişliği: 6,150 mm 6.000 mm bükme uzunluğunda sac kalınlığı: yaklaşık 7,5 mm. Makine çok derin şaft kenarları, dolayısıyla çok derin yanak girintileri için tasarlanmıştır. Orijinal 300 t presleme kuvveti - 1989'da presleme kuvveti 350 t'ye çıkarıldı. Basın yaşına rağmen çok iyi durumda. Makine sökülür ve yüklemeye hazırdır. Makine için belgeler mevcuttur. Ağırlık: yaklaşık 45 t

pressure: 135 tchamfer lenght: 3100 mmdistance between columns: 2600 mmcolumn arm: 410 mmram stroke speed: 200 mm/secwork speed: 10.0 mm/secreturn speed: 120 mm/secwork stroke: 275 mmdayligth: 550 mmtable height: 900 mmtable width: 90.0 mmcontrol: DELEM oil volume: 200 ltr.voltage: 400 Volttotal power requirement: 11.0 kWweight: 8650 kgrange L-W-H: 4250 x 2050 x 2800 mm Very good condition () Current new price: 75.0000 Euros Special price on request---------------------------------------------------------POWER BEND PRO electro-hydraulic press brake featuring: Increased daylight opening (installation height) Increased cylinder stroke Increased throat depth---------------------------------------------------------Equipmen t:- CNC electro-hydraulic press brake- DELEM CNC control DA 56 - 2D graphics Bending sequence calculation Product/tool library USB interface- CNC-controlled axes: Y1 - Y2  ...

pressure: 320 tchamfer lenght: 4100 mmdistance between columns: 3600 mmcolumn arm: 410 mmram stroke speed: 140 mm/secwork speed: 10,5 mm/secreturn speed: 150 mm/secwork stroke: 375 mmdayligth: 650 mmtable height: 900 mmtable width: 220 mmoil volume: 400 ltr.voltage: 380 Volttotal power requirement: 30.0 kWweight: 21300 kgrange L-W-H: 5350 x 2450 x 3150 mmFeatures:- DELEM DA66T CNC control system- CNC-controlled axes: Y1, Y2, X, R, Z1, and Z2, as well as CNC crowning- FIESSLER AKAS laser safety device in front of the machine (including FPSC)- Rear safety device: light barrier- BOSCH/HOERBIGER hydraulic components- SIEMENS electrical components- 2 front support arms- 1 freely movable dual foot control- Upper and lower toolsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 17850 €: 342.72 €: 1 : 100 to: 1000 mm: 300 mm: 7.5 kW: 2110 mm: 1000 mm: 2275 mm: 1900 kg: 1 : 680 mm: 1020 mm: 5 mm/s: 10 mm/s: 6 mm: 100 mm: 190 mm2 guidingsbig upper tool holder and table witht-slotsupper and lower pressbrake toolmanometerrapid down move with automtic changeto working speedpiston stops in every position2 hand panel and foot pedalheight adjustable tableuser manual in Germanand Englishaccording to CE rulesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 135 tchamfer lenght: 3600 mmdistance between columns: 3150 mmstroke of upper beam: 200 mmajustment speed: 70.0 mm/secworking feed: 10.0 mm/secreturn speed: 80.0 mm/sec: 315 bardayligth: 400 mmtable height: 915 mmcolumn arm: 250 mmengine output: 15.0 kWweight: 8800 kgrange L-W-H: 4200 x 1700 x 2600 mmEquipment:- Electro-hydraulic press brake with torsion bar- HACO NC control (Model ATL 550) for X and Y axes Computer-controlled multi-axis NC press Backgauge position pre-selection (electric backgauge) Backgauge retraction for Z-bends Bending depth pre-selection Electric depth adjustment Memory for 200 programs- Swiveling control panel (front left)- NC motorized backgauge (X-axis) with 2 manually adjustable stop fingers- NC motorized depth adjustment (Y-axis)- 1x set of sectionalized gooseneck (swan-neck) upper tools- 1x rotatable MULTI-V die block- Rear safety guard (sliding door) ...

CONTROLS  electronic controls WORKING RANGE PRESS BRAKE  total force (nominal): 85 to  Working length: 2050 mm  distance between columns: 1700 mmBENDING BEAM (Y-AXIS)  stroke: 215 mmELECTRICAL SPECIFICATIONS  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  space requirements -left/right-: 2700 mm  space requirements -front/back-: 2000 mm  total height: 2400 mm  total weight approx.: 8300 kg

pressure: 170 tchamfer lenght: 3170 mmdistance between columns: 2700 mmcolumn arm: 420 mmdayligth: 620 mmstroke: 350 mmajustment speed: 160 mm/secworking feed: 10.0 mm/secreturn speed: 100 mm/secoil volume: 280 L0: 300 barcontrolled axis: 7 AnzahlNumber of working hours: ca. 51.500 htotal power requirement: 16.5 KWweight of the machine ca.: 12700 kgrange L-W-H: 4550 x 2650 x 3150 mm LONG STROKE special version Excellent condition () Original price approx. 200.000 Euro Special price on request----------------------------------------------LONG STROKE electro-hydraulic press brake featuring: Increased daylight opening (installation height) = 620 mm Increased cylinder stroke = 350 mm----------------------------------------------Equipment:- Electro-hydraulic CNC press brake- AMADA CNC control AMNC - 7 axes (X1+X2, Y1+Y2, R, Z1+Z2) Swiveling control unit - front left Touchscreen control panel  ...

pressure: 400 tchamfer lenght: 4050 mmdistance between columns: 3550 mmcontrol: CYBELEC ModEva 10 S total power requirement: 47 kWweight of the machine ca.: 30.400 kgdimensions of the machine ca.: 6000x3000x3450 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 56.0 tchamfer lenght: 1400 mmdistance between columns: 1300 mmthroat: 220 mmstroke: 200 mmdayligth: 485 mmwork speed: 8.0 - 10.0 m/minreturn speed: 35.0 mm/secControl: CNC Boschert back stop - adjustable: 0 - 370 mmwork height max.: 915 mmCylinders :: 2 Stückvoltage: 3x 400 Vconnected load: 8.0 kVAweight: 3700 kg very good / well-maintained condition () with lots of bending tools- in checked conditions - machine video -https://www.youtube.com/watch?v=NrpZs6Ar0VoEquipment:- NC electro-hydraulic press brake- BOSCHERT NC control unit, front- NC electro-motorized back stop (X axis) with 2x manually adjustable stop fingers (R+Z axis)- AMADA PROMECAM (SYSTEM A) upper tool holder- AMADA PROMECAM (SYSTEM A) lower tool holder- Handwheel with analog display for adjusting the bending angle- lots of insert tools, including tool cabinet- 1x working cylinder = double-acting cylinder- upper  ...

pressure: 200 tchamfer lenght: 4100 mmdistance between columns: 3150 mmstroke of upper beam: 200 mmdayligth: 425 mmthroat: 300 mmworking feed: 9.0 mm/secreturn speed: 90.0 mm/secwork height max.: 980 mmback stop - adjustable: ca. 700 mmControl: PPS-TS Touch oil volume: 350 ltotal power requirement: 18.0 kWweight: 12.000 kgrange L-W-H: 5100 x 1950 x 2850 mm Well-maintained condition () Current new price approx. € 110.000 Special price on request- in checked conditions - machinevideo - https://www.youtube.com/watch?v=ZX9Ap23e__sEquipment:- CNC electro-hydraulic press brakes- with LVD CNC PPS-TS TOUCH control unit intuitive, touchscreen-based user interface simple navigation tool and program library X-axis control and position display Y-axis control and position display swivel-mounted control panel (front left)- CNC-controlled axes: Y1/Y2 + X- CNC motorized backgauge (X-axis) with 4 manua ...

pressure: 40.0 tchamfer lenght: 1250 mmdistance between columns: 890 mmwork stroke: 100 mmdayligth: 300 mmcolumn arm: 200 mmtable width: 140 mmajustment speed: 100 mm/secworking feed: 10.0 mm/secreturn speed: 90.0 mm/sectank: 63.0 ltotal power requirement: 3.0 kWweight of the machine ca.: 2000 kgrange L-W-H: 1555 x 1075 x 2149 mm from a vocational training workshop very good condition (!)Features:- conventional hydraulic press brake- swiveling control unit (front left)- electric backgauge (X-axis) incl. digital display for gauge position movement via electric push-buttons (creep and rapid traverse speeds)- manual adjustment of bending depth (Y1 + Y2 axes) handwheel with analog position indicator- 2x manually adjustable gauge fingers (R + Z axes)- 1x upper tool- 1x reversible universal die block- pressure gauge / pressure indicator- 1x mobile control unitThe data for this ad was created w ...

pressure: 220 tchamfer lenght: 4100 mmdistance between columns: 3150 mmstroke of upper beam: 300 mmdayligth: 570 mmworking feed: 21.0 mm/secreturn speed: 200.0 mm/secwork height max.: 970 mmControl: PPS-TS Touch total power requirement: 37.0 kWweight: 27500 kgrange L-W-H: 5100 x 1950 x 2850 mm Well-maintained condition () Special price upon request Equipment:- CNC electro-hydraulic press brakes Intuitive, touchscreen-based user interface Easy navigation Tool and program library Control system The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 135 tchamfer lenght: 4100 mmdistance between columns: 3600 mmControl: DELEM feed down: 100 mm/secfeed bending: 10 mm/sectotal power requirement: 15 kWweight of the machine ca.: 11.700 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 220 tchamfer lenght: 4100 mmdistance between columns: 3600 mmcolumn arm: 410 mmram stroke speed: 150 mm/secwork speed: 10.0 mm/secreturn speed: 140 mm/secwork stroke: 265 mmdayligth: 480 mmtable height: 900 mmtable width: 110 mmoil volume: 300 ltr.voltage: 400 Volttotal power requirement: 18.5 kWweight: 15000 kgrange L-W-H: 5000 x 2400 x 2850 mmALPMAC Manufacturer Video:https://www.youtube.com/watch?v=_FxXyPAcxlEhttps://www.youtube.c om/watch?v=YfkX9RwWv_0ALPMAC Product Video Model B:https://www.youtube.com/watch?v=lmT1tfy43WE------------------------- --------------------------------MODEL SERIES B175-3100 - CNC electro-hydraulic press brake with: increased installation height increased cylinder stroke increased throat depth--------------------------------------------------------! MADE FROM CERTIFIED QUALITY STEEL (ST 37-42-52)! HIGH-PERFORMANCE HYDRAULIC COMPONENTS (HAWE GERMAN ...

: gebraucht : 2022 : 8254 : prompt, Zwischenverkauf v : Türkei : 22240 €: 1 : 30 to: 1250 mm: X und Y Achse : 150 mm: 1010 mm: 255 mm: 265 mm: hydraulisch : 210 mm/s: 10 mm/s: 3 kW: 1760 mm: 1375 mm: 2135 mm: 1700 kgDEMO MACHINE, MINT CONDITIONNC control for immersion depth (Y) and back gauge (X)synchronization control by means of a torsion shaftsheet support armslight barriersdie seat and diedie seat with 4 V openingssplit upper tool, slightly cranked, dividedpedaluser manual in GERMANincl. laser protection device Fiessler(sample photo) BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISEWe offer you maximum security and complete transparency.• HONEST INSIGHTS: Detailed photos and functional videos of the current condition• LIVE ON-SITE CHECK: Live testing is possible at our facility• DIGITAL DEMONSTRATION: Individual live demonstration via video call• RISK-F ...

pressure: 150 tchamfer lenght: 3550 mmdistance between columns: 3050 mmControl: Cybelec DNC 880S stroke: 700 mmthroat: 350 mmdimensions: 4400x2200x3940 mmweight of the machine ca.: 15.000 kgAccessories/equipment:- Bending aid in front of the machine- Parking space for bending aid- 3 stop fingers- Control conversion 2011The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 40.0 tchamfer lenght: 1600 mmdistance between columns: 1200 mmcolumn arm: 200 mmram stroke speed: 60.0 mm/secreturn speed: 80. mm/secwork speed: 60.0 mm/secwork stroke: 100 mmtable height: 760 mmtable width: 150 mmoil volume: 130 ltr.voltage: 400 VoltControl: ESA E21 total power requirement: 4.0 kWweight: 3030 kgrange L-W-H: 2050 x 1800 x 2030 mm Demonstration/demo machine () From our showroom (like new) With very few operating hoursFurnishing:- compact hydraulic press brake- BERNARDO NC control model E21- swiveling control panel- electrical adjustment of the backgauge- Back stop on recirculating ball spindles- electrical adjustment of the immersion depth- Laser protection device in front- Upper deer foot tool - divided- Tool holder with quick change system- Universal die block- side + rear protective device- 2x front support arms- movable double foot switch (operation)The data ...

pressure: 300 tchamfer lenght: 4100 mmdistance between columns: 3710 mmstroke - stepless adjustable: 250 mmcolumn arm: 330 mmdayligth: 500 mmtable height: 940 mmtable width: 250 mmworking feed: 7.0 mm/secreturn speed: 90.0 mm/secControl: konv. operating pressure: max. 305 barvoltage: 380 Vtotal power requirement: 22.5 kWweight: 25200 kgrange L-W-H: 4320 x 2100 x 3370 mm well-maintained condition ()- in checked condition - machine video -https://www.youtube.com/watch?v=rPOBwTfVReoEquipment:- simple, conventional hydraulic press brake- swiveling control panel, left front- electro-motoric back stop (X axis) adjustment via front control panel (button) with analog position display fine adjustment via handwheel, front- with 3x stop fingers, manually adjustable- electro-motoric depth adjustment (Y1+Y2 axis) with analog position display- 1x split set of 85° deer foot upper tool- 1x MultiV - uni ...

pressure: 50 tchamfer lenght: 1550 mmdistance between columns: 1150 mmControl: CYBELEC DNC 1200 PS Eco column arm: 405 mmtable height: 900 mmstroke of ram: 400 mmdistance between table / ram: 720 mmtotal power requirement: 9,5 kWweight of the machine ca.: 5.200 kgdimensions of the machine ca.: 2000x1900x2920 mmAccessories/Equipment:- CYBELEC DNC 1200 PS Eco controller- 2 support arms- 4 stop fingers- Lasersafe- Foot switchThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 330 tchamfer lenght: 3100 mmdistance between columns: 2600 mmControl: Cybelec VisiTouch 24 throat: 500 mmdayligth: 500 mmstroke: 300 mm: 165 mm/sbending speed: 0 - 10 mm/stotal power requirement: 32 kWweight of the machine ca.: 18.500 kgdimensions: 3900 x 1970 x 3520 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 120 tchamfer lenght: 3050 mmdistance between columns: 2550 mmstroke of upper beam: 155 mmthroat: 350 mmajustment speed: 100 mm/secworking feed: 9.0 mm/secreturn speed: 77.0 mm/secControl: P 40 work height max.: 878 mmtable width: 104 mmoil volume: 150 ltotal power requirement: 11.0 kWweight: 7550 kgrange L-W-H: 3550 x 2150 x 2600 mm- in checked conditions - machinevideo - https://www.youtube.com/watch?v=bUaEa_nHZ6EEquipment:- NC electro-hydraulic press brakes- with NEW ELGO NC control unit P40 New price approx. 4.000 Euro Control / movement of the backgauge - X axis (target/actual input) Control / movement of the depth setting - Y axes (target/actual input) Inching mode for X axis Y axes also possible- Swivel operation, front left- NC controlled axes : Y1 Y2 X- NC electro-motorized backgauge (X axis) with 2x manually adjustable stop fingers including lateral and height adjustme ...

: neu : 2023 : 7295 : ca. 12 Wochen ab Auftrags : Türkei : 22750 €: 436.8 €: 150 to: 1520 mm: 300 mm: hydraulisch : 11 kW: 2630 mm: 1000 mm: 2450 mm: 3270 kg: 610 mm: 1520 mm: 5 mm/s: 9 mm/s: 10 mm: 100 mm: 190 mm2 guidingsbig upper tool holder and table witht-slotsupper and lower pressbrake toolmanometerrapid down move with automtic changeto working speedpiston stops in every position2 hand panel and foot pedalheight adjustable tableuser manual in Germanand Englishaccording to CE rulesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 3000 tchamfer lenght: 14000 mmdistance between columns: 10500 mmControl: CYBELECCNC 7000 m. Grafik table width: 1000 mmstroke: 1300 mmmin./max.distance between table and ram: 1800 mmcontrolled axis: Y1, Y2, X1, X2 total power requirement: kWweight of the machine ca.: mind. 465 tdimensions of the machine ca.: 14600 x 4200 x 7200 mm- throat depth: 700 mm- controlled axes: Y1, Y2, X1, X2- Dimensions (length x width x height):- Foundation depth for table: 3400 mm- Foundation depth for stand: 1700 mm- Dimensions of the individual components for transportation:- Table: 14020 x 4270 x 910 mm, weight approx. 125 tons- Top section: 15240 x 4060 x 910 mm, weight approx. 120 tons- 2 side stands: 7620 x 3550 x 1530 mm, weight approx. 90 tons each- Lower tool: 15240 x 1220 x 1220 mm, weight approx. 40 tons- 2 pcs. Container 40” for cylinder, electrics and various attachments- Control sys ...

pressure: 180 tchamfer lenght: 3100 mmdistance between columns: 3600 mmControl: Cybelec CybTouch 15 stroke: 250 mmdayligth: 470 mm: 180 mm/sbending speed: 0-10 mm/s: 165 mm/stotal power requirement: 15 kWweight of the machine ca.: 12.500 kgdimensions: 4000 x 2000 x 3030 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 125 tchamfer lenght: 3000 mmdistance between columns: 3100 mmControl: Delem DA 66S stroke: 300 mmdayligth: 500 mm: 200 mm/sbending speed: 0-12 mm/stotal power requirement: 15 kWweight of the machine ca.: 10.000 kgdimensions: 4200x2200x2900 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 110 tchamfer lenght: 2550 mmControl: Cybelec DNC 70 weight: 9000 kgdimensions: 3000 x 2100 x 3000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 250 tchamfer lenght: 3550 mmdistance between columns: 3000 mmControl: Cybelelc DNC 1200 total power requirement: kWweight of the machine ca.: 18.500 kgdimensions of the machine ca.: 4300x2750x3750 mmAccessories:- 2-hand foot switch- Lasersafe Fisseler- Hydraulic tool clamping at top and bottom- Die shift- Hydraulic crowning- Support arms- Cybelec DNC 1200 control- 1 set of upper and lower tools- Controlled axes y1, y2, x, r, z1, z2, inclined stop- Protective grilleThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 160 tchamfer lenght: 3050 mmdistance between columns: 2550 mmtable width: 220 mmcolumn arm: 280 mmdayligth: 440 mmwork stroke: max. 250 mmtotal power requirement: 22 kWweight of the machine ca.: 13 tPress force: 160 tBending length: 3,050 mmDistance between columns: 2,550 mmTable width: 220 mmThroat depth: 280 mmInstallation height (daylight): 440 mmMax. stroke: 250 mmTotal power requirement: 22 kWMachine weight: approx. 13 tAdditional InformationStroke speed:Downward (rapid approach): 90 mm/sPressing speed: 11 mm/sReturn speed (upward): 90 mm/sOperation: Two-hand control and foot pedalThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 160 tchamfer lenght: 4100 mmdistance between columns: 3100 mmdayligth: 370 mmstroke of upper beam: 200 mmthroat: 500 mmajustment speed: 100 mm/secworking feed: 9.0 mm/secreturn speed: 86.0 mm/secwork height max.: ca. 900 mmback stop - adjustable: max. 500 mmControl: CYBELEC oil volume: 150 ltotal power requirement: 15.0 kWweight: 12000 kgrange L-W-H: 5100 x 2100 x 2750 mm Original price ~ 85.000 Euro From a maintenance workshop Well-maintained condition () Includes optional equipment- in checked conditions - machinevideo - https://www.youtube.com/watch?v=pleltYCkXDQEquipment:- Electro-hydraulic CNC press brake- With DELEM CNC control unit Swiveling control panel (front right) Tool & program library Simple CNC programming- CNC-controlled axes: Y1 + Y2 + X + R + CNC crowning- CNC motorized backgauge (X-axis) With 4x manually adjustable stop fingers (Z-axis)- CNC motorized height ...

pressure: 220 tchamfer lenght: 4100 mmdistance between columns: 3600 mmControl: Cybelec CybTouch 12 throat: 400 mmstroke: 220 mmdayligth: 480 mm: 140 mm/sbending speed: 0-10 mm/s: 110 mm/stotal power requirement: 18,5 kWdimensions: 4500x2000x2900 mmweight: 13.000 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 200 tchamfer lenght: 4100 mmControl: CYBELEC DNC 900 stroke: 260 mmweight of the machine ca.: 16.000 kgdimensions of the machine ca.: 4500x2400x3000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 320 tchamfer lenght: 6100 mmcontrol: MNC 95 c Number of working hours: 4312 hvoltage: 380 V / 50 Hz V: 7.100 x 2.450 x 3.400 mmtotal power requirement: 22 kWweight of the machine ca.: 26 tMaximum press force: 320 tBending length: 6,100 mmDistance between side frames: 5,500 mmControl system: MNC 95 CMaximum ram stroke: 250 mmMaximum daylight (table to ram): 500 mmThroat depth: 300 mmTable width: 250 mmApproach speed: 80 mm/sWorking speed: 7 mm/sReturn speed: 70 mm/sOil tank capacity: 350 lOperating hours: 4,312 hPower supply: 380 V / 50 HzTotal connected load: 22 kWMachine weight: approx. 26 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 330 tchamfer lenght: 6100 mmdistance between columns: 5600 mmControl: Cybelec VisiTouch 24 stroke: 300 mmdayligth: 500 mm: 160 mm/sbending speed: 0-9 mm/stotal power requirement: 32 kWweight of the machine ca.: 36.000 kgdimensions: 6970 x 2300 x 4150 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 60.0 tchamfer lenght: 1270 mmdistance between columns: 1000 mmcolumn arm: 410 mmram stroke speed: 160 mm/secwork speed: 10.0 mm/secreturn speed: 165 mm/secwork stroke: 275 mmdayligth: 530 mmtable height: 900 mmtable width: 90.0 mmback stop - adjustable: max. 800 mmoil volume: 150 ltr.voltage: 400 Vengine output: 7.5 kWWeight: 4320 kgrange L-W-H: 2250 x 1960 x 2750 mm Demonstration/demo machine () From our showroom (like new) With very few operating hours--------------------------------------------------CNC press brake with special equipment Version ERGO - knee room for the operator flexible articulated arm mount for the controller increased installation height increased cylinder stroke as well as increased bending beam speeds-------------------------------------------------- Furnishing:- DELEM CNC control model DA-66T graphic/touch screen 2D graphical programming 17 TFT color s ...

pressure: 220 tchamfer lenght: 3200 mmdistance between columns: 2700 mmControl: Cybelec CybTouch 12 throat: 400 mmstroke: 220 mmdayligth: 480 mm: 140 mm/sbending speed: 0-10 mm/s: 110 mm/stotal power requirement: 18,5 kWdimensions: 3600 x 2000 x 2900 mmweight: 11.500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 1.500 tchamfer lenght: 15000 mmdistance between columns: 10160 mmcontrol: CNC 10 Grafik throat: 770 mmtable length: 15000 mmweight of the machine ca.: 170 tdimensions of the machine ca.: 17000 x 5400 x 5900 m- Pressure: 1.250t- Bending length:15.000mm- Control: CNC 10 graphics- No. of axes axes: min. 10- Frame width: 10.160mm- Projection: 770mm- Table length: 15,000mm- Dimensions: 17,000mm x 5,400mm x 5,900mm- Mass: approx. 230tEquipment- Crowning device- CNC 10 control with graphics- Hydr. clamping of the upper tools- Multi-man operation- Increased speeds- Automatic height-adjustable rear sheet stop- die cushion device- Horn length 2,200 mm on both sidesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 tchamfer lenght: 2050 mmtotal power requirement: 11 kWweight of the machine ca.: 5,9 tdimensions of the machine ca.: m- ram adjustment: 150 mm- distance ram to table: 400 mm- stroke: 150 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 60.0 tchamfer lenght: 1270 mmdistance between columns: 1000 mmcolumn arm: 410 mmram stroke speed: 160 mm/secwork speed: 10.0 mm/secreturn speed: 165 mm/secwork stroke: 275 mmdayligth: 530 mmtable height: 900 mmtable width: 90.0 mmback stop - adjustable: 500 mmcontrol: DA 66T oil volume: 150 ltr.voltage: 380 Vengine output: 7.5 kWWeight: 4320 kgrange L-W-H: 2250 x 1960 x 2750 mm current new price approx. 65.000 euros very rarely used! Special price on request- in checked condition - machine video -https://www.youtube.com/watch?v=KRifrqTgkVU-------------------------- ----------------------SPEED BEND PRO CNC press brake: increased installation height increased cylinder stroke and increased bending beam speeds------------------------------------------------Equipment:- CNC electro-hydraulic press brake- DELEM CNC control model DA-66T graphics/touchscreen 2D graphic touchscreen progr ...

pressure: 175 tchamfer lenght: 3100 mmdistance between columns: 2600 mmcolumn arm: 410 mmram stroke speed: 180 mm/secwork speed: 12.0 mm/minreturn speed: 190 mm/secwork stroke: 275 mmdayligth: 550 mmoil volume: 300 ltr.table height: 900 mmtable width: 90.0 mmvoltage: 400 Volttotal power requirement: 15.0 kWweight: 9800 kgrange L-W-H: 4150 x 2150 x 2800 mm-------------------------------------------------- HIGH-SPEED hydraulic press brake withincreased installation heightincreased cylinder strokeenlarged projection-------------------------------------------------- Furnishing:- DELEM CNC control model DA 66T- swiveling touchscreen control unit- 7 controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning- electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm- on ball screws- controlled electr. Stop fingers Z1 + Z2- split upper deer foot tool Roleri 135.85.R08, System A-  ...

pressure: 6,2 tchamfer lenght: 285 mm mmdistance between columns: 230 mmdayligth: 215 mmthroat: 70 mmstroke: 100 mmworking feed: 9,8 mm/secreturn speed: 50 mm/secquantity of oil: 10 lControl: DELEM DA 41T total power requirement: 0,7 kWweight of the machine ca.: 250 kgdimensions: 900 x 1300 x 550 mmDemonstration Machineâ?¢ Basic C-frame designâ?¢ Compact benchtop modelâ?¢ Ideal for prototypes and small production runsâ?¢ Very short setup timeâ?¢ Functionally simpleâ?¢ Wide range of applicationsâ?¢ Low noise levelâ?¢ Low power consumptionâ?¢ Easy to operateIncludes optional equipment:- DELEM DA 41T CNC control The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 125 tchamfer lenght: 4000 mmdistance between columns: 4100 mmControl: Cybelec VisiTouch 24MX stroke: 300 mmdayligth: 500 mm: 200 mm/sbending speed: 0-12 mm/stotal power requirement: 18 kWweight of the machine ca.: 13.000 kgdimensions: 5080 x 3110 x 1800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 40.0 tchamfer lenght: 1600 mmdistance between columns: 1100 mmstroke of upper beam: 100 mmthroat: 195 mmworking feed: 10.0 mm/secreturn speed: 70.0 mm/sec: 180 barwork height max.: 840 mmtable width: 110 mmdayligth: 295 mmControl: ATS 585 total power requirement: 5.5 kWweight: 2500 kgrange L-W-H: 2100 x 1200 x 1800 mm- in checked conditions - machinevideo - https://www.youtube.com/watch?v=l9CdurfDGb0Features:- NC-controlled hydraulic press brake- with ATLANTIC NC control ATS 585 Rear stop positioning (X-axis) Depth adjustment positioning (Y1, Y2 axes) Ability to program various programs Swiveling control panel, front left Tool and program library- NC electric-motor-driven material/backgauge (X-axis) With 2 stop fingers, manually adjustable (R and Z axes)- Tool holder system A - with upper wedge camber- Split insert/bending tools - DSP LASER RX safety device - front - 2x side, s ...

pressure: 130 tchamfer lenght: 3060 mmdistance between columns: 2690 mmcolumn arm: 410 mmstroke: 365 mmdayligth: 535 mmajustment speed: 200 mm/secworking feed: 1.0 - 10.0 mm/secreturn speed: 135 mm/sectable width: 120 mmtable height: 1050 mmtiltable up to: +/- 10.0 mmNumber of working hours: ca. 31.800 hcompressed air: 5.0 - 7.0 baroil volume: 250 loperating pressure: 340 barvoltage: 400 Vtotal power requirement: 23.0 KVAweight of the machine ca.: 12950 kgrange L-W-H: 3660 x 2310 x 2900 mmEquipment:- CNC electro-hydraulic folding/die bending press- DELEM CNC control - swiveling front left High-resolution graphic screen Clear, concise menus in the operators language Large tools and products library Graphical 2D programming automatic bending sequence calculation and collision detection EMERGENCY stop button at the front- CNC axis adjustment: Y1 - Y2 - X - R axis CNC crowning Manual adjustm ...

pressure: 330 tchamfer lenght: 4100 mmdistance between columns: 3600 mmControl: Cybelec VisiTouch 24 Arm length: 500 mmstroke: 300 mmdayligth: 500 mm: 165 mm/sbending speed: 0 - 10 mm/stotal power requirement: 32 kWweight of the machine ca.: 21.000 kgdimensions: 4850 x 2300 x 3520 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 185 tchamfer lenght: 4000 mmdistance between columns: 4100 mmControl: Cybelec VisiTouch 24MX stroke: 300 mmdayligth: 500 mm: 175 mm/sbending speed: 0-12 mm/stotal power requirement: 22 kWweight of the machine ca.: 15.500 kgdimensions: 4970 x 3260 x 2090 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 225 tchamfer lenght: 2050 mmdistance between columns: 1550 mmcontrol: CYBELEC DNC 1200 PS Eco stroke: 550 mmtable height: 700 mmthroat: 405 mmdistance between table / ram: 320-870 mmcolumn arm: 405 mmweight of the machine ca.: 14.000 kgAccessories / equipment:- controlled axes: Y1 - Y2 - X - R- Z1 and Z2 can be moved manually- Lasersafe angle measurement- Pneumatically adjustable support table- pneumatic upper and lower tool clamping- 2-hand foot control- manual crowningThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 150 tchamfer lenght: 4050 mmdistance between columns: 3550 mmControl: CYBELEC ModEva Pac throat: 350 mmdistance between table / ram: 430 mmtable width: 250 mmstroke: 250 mmtotal power requirement: 18,5 kWweight of the machine ca.: 16500 kgdimensions of the machine ca.: 4400x2100x3200 mmEquipment/accessories:- Control conversion at the end of 2018- Electric backgauge 1250 mm- 10-stage die displacement- crowning- EHT 26 mm tool holder- Axes controlled: Y1,Y2,X,R- Sheet metal holding table- 4x manually adjustable stop fingers- pneum. Upper tool clamping- Safety light curtain- 3x height-adjustable support arms- Oil cooler- 2-hand foot switchThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 130 tchamfer lenght: 3550 mmdistance between columns: 3050 mmstroke: 250 mmControl: Cybelec weight of the machine ca.: 11.600 kgdimensions of the machine ca.: 4000x2000x3000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.