327 HOMAG satılık ikinci el makine

Manufacturer: HOMAG Maschinenstrasse, Type: Kf 62, Year: 1992, Work piece width min-max mm: Maschine 1 1200 mm Maschine 2 2600 mm, Min.-max. workpiece length in mm: 250-2600, Min.-max. workpiece height in mm: 10-50, Edge band thickness min/max mm: 0,5-3,0, Soft edge single side: no, MA 1 min - max working width: 250-1200, MA 1 chipper: yes, MA 1 fine milling: yes, MA 1 grooving: no, MA 1 glueing part Soft: no, MA 1 rough milling: yes, MA 1 radius milling 1: yes, MA 1 grooving: no, Min - max working width MA 2: 250-2600, MA 2 min - max edge material thickness mm: 0,5-3,0, MA 2 edge thickness 0.5-3 mm: yes, MA 2 chipper: yes, MA 2 fine milling: yes, MA 2 glueing part straight: yes, MA 2 trimming: yes, MA 2 Andruckzone : yes, Coil magazine: 2-fach, Feeding: no, Angular transfer: yes, Feeding speed max m/min: 10-50, Compressed air bar: 6, Premilling: yes, Flush/radius/chamfer milling: yes 2  ...

Manufacturer: Homag , Type: Genius 20/50/16/V/G, Year: 1998, Control: Homatic, Feeding speed max m/min: 80, Working range X: 5600, Working range Y-axis: 1600, Working range Z: 60/120, C axis: yes, B-axis: no, Tool adaption system: HSK F 63, Milling engine 1 hours power: 12, rpm 1): 1500 - 18000, Number of tool changers: 1, Number of tools per tool-magazine: 30, Vertical drills-X: 5, Drill vertical Y: 5, raster table: Glattisch, 2 station allocation: yes, 4 station allocation: yes, Stops in the table front: 14, Stops in the table rear: 3, Vacuum pumps m³/h: 66 + 100, Saw unit: yes, Edgebanding unit: yes, Edgeband hight mm: 40, Marking laser: yes, Year :1998

Manufacturer: Homag, Type: KL 79, Control: Homatic, Min-max edge material mm: 3-20, Min.-max. workpiece length in mm: 300, Min.-max. workpiece height in mm: 10-60, Edgeband height max mm: 65, Min-max feed m/min: 10-25, Premilling: no, Fine milling: yes, Application of separation agent: no, IR zone: no, Strip magazin: Leistenmagazin, Min.-max. batten magazine mm: 3-20, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes, Corner tracing type: no, Bonding part EVA: yes, Pre-smelting Kg/Hr: yes, Number of sanding units: 2, Profile sanding top bottom: yes, Top pressure belt/roller: Riemen, Edge sanding straight: yes,

Manufacturer: Homag, Type: KFL 10/42/QE/S, Year: 2002, Program: yes, Control: Homatic NC 21/ES00, Work piece width min-max mm: 280-600, Min.-max. workpiece length in mm: 320-2500, Min.-max. workpiece height in mm: 8-60, Edgeband height max mm: 30-50, Kantenmaterial min-max mm: 0,3, Vorschub min- max m/min: 10-40, Finished product: Spanplatten aufdoppeln bekanten, Softforming: yes, Einlauflineal gesteuert: yes, Premilling: yes, Profile milling: yes, Trennmittelauftrag: yes, IR zone: yes, Coil magazine: 2-fach, Premilling: yes, Mitre stations: yes, Vorfräsen: yes, Fasefräsen: yes, Radiusfräsen Achsverstellung: yes, Oszilierend: yes, Reinigungsdüsen: yes, Ersatzverleimteil : yes, Verleimteil EVA: yes, Düse: yes, Year :2002

Manufacturer: Homag KAL 310/9/A20/S2, Type: 310/9/A20/S2, Year: 2005, Control: Powercontrol, Barcode: möglich, Min-max edge material mm: 0,3-3,0, Work piece width min-max mm: 75, Min.-max. workpiece length in mm: 250, Min.-max. workpiece height in mm: 10-60, Min-max feed m/min: 15-30, Axis control: yes, Infeed table: Winkelanschlag, Einlauflineal gesteuert: yes, Premilling: yes, Fine milling: yes, Application of separation agent: yes, IR zone: yes, Power per lamp: 400, Coil magazine: yes, Strip magazin: no, Mitre stations: yes, Radius milling axis adjustment: yes, 2 motors: FK 13, Magazin : 2 X 6 fach, Radius scraper: yes, Type of scraper: servo gesteuert, Scraper with axis adjustment: yes, Spraying system 2: yes, Bonding part EVA: PU Verleimteil, Buffing unit: yes, Barcode: möglich, Workpiece support: yes, Hover cussion table: yes, Return type: TFU 140/L/20/08/105 Bauyeshr 2018, FREE  ...

Manufacturer: Homag, Type: Profi BAZ/20/40/14/3/KA, Year: 2003, Control: Woodwop, Maschinensteuerung: Homag, Programming station office: möglich, Work piece width min-max mm: 1400, Min.-max. workpiece length in mm: 5200, Min.-max. workpiece height in mm: 10-60, C axis: yes, Number of milling spindles vertical: 2, Anzahl Frässpindeln horizontal: no, Milling engine 1 hours power: ca.12, U/min 1) Vertikal: 1500-24000, Milling engine 2 hours power: ca.12, U/min 2) Vertikal: 1500-24000, Number of tool changers: 2 (1 defekt), Tellerwechseler: yes, Number of tools per tool-magazine: 12, Mitfahrender Werkzeugwechsler: yes, Belt conveyor: Rollentransport, Traverse table: yes, Stops in the table front: yes, Automatische Beladung: yes, Automatschische Entladung : yes, Vacuum pumps m³/h: 100, Tool clamping system: HSK 63, Saw unit: yes, Radial arm machine: yes, Laser positioning: no, incl. tools: ...

Manufacturer: Homag, Type: KL 10/18/QA, Year: 2000, Program: Homatic, Control: NC 21, Min.-max. workpiece height in mm: 85 - 1200, Edgeband height max mm: 240, Min-max feed m/min: 8 - 60, Axis control: 0,3 - 3,0 , Einlauflineal gesteuert: 10 - 40, Application of separation agent: 0,4 - 12, Power per lamp: yes, Strip magazin: yes, Min.-max. batten magazine mm: yes, Mitre stations: yes, Pre-milling: Granulat, Strip magazin: yes, Magazin : yes, Grooves, slewable-controlled: FK 13, Nuten : UF 11, Radius scraper: yes, Type of scraper: 8, Scraper with axis adjustment: yes, Flat scraper: 2, Type of scraper 2: yes, Corner trace buffing: 2 X Fase, 4 motors: yes, Corner trace buffing: yes, Servo-Kopieren: yes, Rollende-Kette: Band, Ersatzverleimteil : Riemen, Bonding part EVA: 6, Nozzle: 11.000, Pre-smelting Kg/Hr: yes, Year :2000

Manufacturer: HOMAG Optimat , Type: BOF 32/30/K, Year: 1999, Control: Homatic, Maschinensteuerung: 80, Programming station office: 3600, Work piece width min-max mm: 1200, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 1, Throuh running machine: 2, Feeding speed max m/min: HSK 63, Working range X: 12, Working range Y-axis: 24000, Working range Z: 12, Working range Y-axis: 24000, B-axis: 2, Pendulum processing: 12, Tool adaption system: 2 X 12, Milling engine 1 hours power: 2 X 7, U/min 1) Vertikal: 2 X 6, Milling engine 2 hours power: 2 X 6, Frässpindel horizontal 1 kW: 4, U/min 1) Horizontal: yes, Bohrergetriebe Horizontal: 2 X 120 , Kettenwechsler: no, Working widht max mm: yes, Max. working depth in mm: inkl Werkzeuge und Zubehör, Year :1999

Üretici: Homag, Tip: 20/30/12/G, Yıl: 1994, Kontrol: Homatic NC 81/Woodwop, İş parçası genişliği minimum-max mm: 130-1200, minimum-max. İş parçası uzunluğu mm cinsinden: 250-3000, minimum-maksimum. İş parçası yüksekliği mm cinsinden: 40, C ekseni: evet, İş parçası genişliği minimum-max mm: 130-1200, minimum-max. İş parçası uzunluğu mm cinsinden: 250-3000, minimum-maksimum. İş parçası yüksekliği mm cinsinden: 40, Frezeleme milleri sayısı: 1, Takım uyarlama sistemi: HSK 63, Freze motoru 1 saat güç: 7,5, Anzahl Werkzeugwechsler: 1, Takım şarjörü başına alet sayısı: 8, Dikey matkaplar-X: 10, Dikey matkap Y: 5, Testere ünitesi: evet, Radyal kol makinesi: evet, mürekkep. Werkzeuge:

A high-performance Homag Edgebanding Line paired with a Ligmatech Automatic Return System. This combination allows for a "one-man operation," where the machine applies the edges and then automatically sends the panels back to the operator for the next pass. Below is a professional draft for an online listing. --------------------------------------------------------------- For Sale: 2007 Homag Optimat Edgebanding Cell Featuring: Homag KAL 310 Edgebander & Ligmatech ZHR 05 Return System This is a complete, industrial-grade edgebanding solution manufactured in Germany. The set consists of a high-speed Homag KAL 310 single-sided edgebander and a Ligmatech ZHR 05 Boomerang return conveyor. This setup is designed for high-volume production, significantly reducing labor costs by allowing a single operator to manage the entire infeed and outfeed process. Machine 1: Homag Optimat KAL 310/10/ ...

Kenar bantlama makinesi Tip: Optimat KDF 230 AT Üretici: Homag Yıl: 2017 Makine iyi durumda, güç altında Daha fazlasını buradan bulabilirsiniz - / Bizimle şu adresten iletişime geçin:

Kenar bantlama makinesi Tip: EDGETEQ S-200 Üretici: Homag Yıl: 2018 Saatler: 540 Makine çok iyi durumda, güç altında Daha fazlasını buradan bulabilirsiniz - / Bizimle şu adresten iletişime geçin:

Kenar bantlama makinesi Tip: KAL370 Ambition 2274 Üretici: Homag Yıl: 2016 Makinede ayrıca lazer kenar bantlama ve pur yapıştırıcı kenar bantlama için airTec var. Makine iyi durumda, güç altında Daha fazlasını buradan bulabilirsiniz - / Bizimle şu adresten iletişime geçin:

Kontur frezeleme için değişim üniteleri HOMAG

Zımpara ünitesi Yapmak: HOMAG Türü: PS10

Salınımlı parlatma ünitesi HOMAG

Parlatma ünitesi - 1 adet motor

Üretici: Homag Verleimteil gebraucht, Tip: Q 34, Yıl: 1996, FREITEXT1: vorhanden für linke und rechte Seite, FREITEXT2: 2 Linke Seite/2 rechte Seite, Yıl :1996

Üretici: Homag KF/FL/KL 20, Tip: Pneumatische Mittenunterstüzung, Yıl: 1996, FREITEXT1: Länge ca.16000, FREITEXT2: Gerät kann gekürtzt werden, FREITEXT3: Pneutisch Hochklappbar, Yıl :1996

Üretici: Homag aus Homag KF 20, Tip: Ein und Ausgangskarten Streckensteuerung,

Üretici: 2 Stück Kantenschleifaggregate KS 10 Homag, Makineden yedek parça: KS 10, Kantenschleifaggregat: evet, sol makine tarafı için: evet, Kendi sürücü: evet, Toplam yükseklik mm: 450, Montaj genişliği mm: 350, Maksimum rulo çapı: 80, Hız rpm: 1450, Pnömatik olarak kontrollü: evet, pnömatis gesteuert : evet, Zımpara bandı yüksekliği: 150, Zımpara bandı genişliği maksimum mm: 150 X 2100, Zımpara kuşağı uzunluğu maksimum mm: 2100, Ana motor kW: 0,5, 2 kayış hızı: 1, Kemer pnömatik olarak sıkıştırma: evet, Salınım: evet,

Üretici: Homag Tellerwechsler, Yıl: 1999, Tip: 8 Fach Wechsler, Uzunluk mm: Ersatzteil aus Weeke 195 T, Yıl :1999

Üretici: Bohrgetriebe, Stück Bohrgetriebe: 1, Sondaj milleri sayısı: 13, Izgara 32 mm: evet,

Üretici: Kraft-Homag-Viet, Beabeitung: Rohlinge Kaliberieren-Formatieren- Fälzen und Kaliberieren, Herstellung von: Innentüren, İş Parçası genişliği min-maksimum mm: 1300 X 2200, Min.-max. İş parçası yüksekliği mm cinsinden: 10-60, minimum-maksimum. İş parçası uzunluğu mm cinsinden: 50-2200, Üretici1: Bargstedt, Makine tipi 1: Beschickungsanlage doppelseitig, Üretim yılı1: yaklaşık 2000, Üretici2: Viet Kalibrieranlage, Makine tipi2: 4 Agrega Walze/Schuh, Üretim yılı2: yaklaşık 1998, Üretici3: Homag Doppelendprofiler, Makine tipi 3: Längsprofilerer, Üretim Yıl3: Überholt 2004,

Üretici: Homag, Tip: KAL 310/8/A20/S2, Yıl: 2005, Kontrol: PC 22, İş parçası genişliği minimum-max mm: minimum 55/100, minimum-max. İş parçası yüksekliği mm cinsinden: 12 - 60, Minimum maksimum besleme m/deq: 18 - 24, Einlauflineal gesteuert: evet, Ön frezeleme: 2 x 3kW, Ayırma ajanı kullanımı: evet, Bobin şarjörü: 2, Mitre istasyonları: Fase / Gerade, Ön frezeleme: 2 x 1,5 kW, Eğim frezeleme: FK 13 - 8Fach, yarıçaplı frezeleme: 4 kW, Köşe izleme türü: MN 21, Düz kazıyıcı: FA 11, Bağlama parça EVA: A 20, Üst basınç kuşağı/silindiri: Bant, İş parçası yeniden besleme: vorinstalliert, SERBEST METİN: Frreiplatz, Yıl: 2005

Üretici: Homag Siemens Achskarte Drehgeber, Tip: ser 8808 B, Model: Drehge. Arayüz,

Üretici: Siemens Elektronikkarte 03410, Tip: 3818, Model: 548 229 9001, Seri numarası: A 8605 590 700,