144 DOOSAN satılık ikinci el makine

Maksimum Dönüş çapı 480 mm Maksimum Dönüş uzunluğu 790 mm Ana iş mili hızı 2800 rpm Alt iş mili hızı 4500 rpm Ana iş mili gücü 22 kw 4 adet yaşam aracı ile

Dönüş Çapı 830 mm Dönüş uzunluğu 750 mm İş mili hızı 2000 rpm Denetleyici FANUC-i Ayna boyutu 24"

Doosan G15S-2 Forklift kamyon Seri: DG01041 LP GAS ile çalışır, 1500 Kg'a kadar kaldırma kapasitesi, maksimum kaldırma yüksekliği 4730 mm, tiz direkler, yana kaydırma ile öne ve arkaya doğru eğilir, çatal uzantıları ile birlikte gelir

CNC lathe Type: PUMA 2000 SY Manufacturer: Doosan Year: 2005 Control: Fanuc Hours: 38000 Counter spindle Driven tools Collet chuck Spindle bore: 65 mm Max turning diameter: 330 mm Max turning length: 510 mm Swing over bed: 600 mm Swing over support: 550 mm X: 250 mm Z: 580 mm Turret: 12 positions Driven tools Chip conveyor Spindle overhaul in 2023 Machine in good condition, fully functional, under power Find more here - / Contact us at -

CNC lathe Type: LYNX 220 C Manufacturer: Doosan Year: 2008 Control: Fanuc Hours: 17100 Spindle overhaul in 2025 Max. turning diameter: 320 mm Max. turning length: 305 mm Swing diameter over bed: 510 mm Swing diameter over slide: 290 mm X: 175 mm Z: 330 mm Spindle speed: 4000 rpm Spindle passage: 76 mm Bar capacity: 65 mm Turret: 12 positions Machine in good condition, fully functional, under power Find more here - / Contact us at -

CNC turning center Type: Puma MX 1600 ST Manufacturer: Doosan Year: 2015 Highly productive multifunctional CNC turning-milling center designed for complete machining of parts in one clamping. The machine is equipped with a 16-position turret, milling spindle with 40-position Capto C5 tool magazine, counter spindle Y-axis and B-axis. The equipment includes Grundfos 25 bar high-pressure cooling Renishaw tool probe CNC Spacesaver 2500 bar feeder Sung Woo MX1600 chip conveyor Belt oil separator and belt workpiece ejector. Both the main and counter spindles have continuously adjustable clamping force and the possibility of using a hydraulic chuck or collet clamping Control: FANUC Series 31i Model A Hours: 17662 Max machining diameter: 330 mm Max machining length: 900 mm Main spindle: 6" chuck Speed ​​up to 6,000 rpm Bar passage 51 mm Y-axis: ± 85 mm B-axis: ± 120° ...

CNC turning center Type: Puma MX 1600 ST Manufacturer: Doosan Year: 2014 Highly productive multifunctional CNC turning-milling center designed for complete machining of parts in one clamping. The machine is equipped with a 16-position turret, milling spindle with 40-position Capto C5 tool magazine, counter spindle Y-axis and B-axis. The equipment includes Grundfos 25 bar high-pressure cooling Renishaw tool probe CNC Spacesaver 2500 bar feeder Sung Woo MX1600 chip conveyor Belt oil separator and belt workpiece ejector. Both the main and counter spindles have continuously adjustable clamping force and the possibility of using a hydraulic chuck or collet clamping Control: FANUC Series 31i Model A Hours: 32371 Max machining diameter: 330 mm Max machining length: 900 mm Main spindle: 6" chuck Speed ​​up to 6,000 rpm Bar passage 51 mm Y-axis: ± 85 mm B-axis: ± 120° ...

kontrol: FANUC 21i TB turlama çapı: 355 mm dönüş uzunluğu: 1330 mmc ekseni: indeksleme: 0.001 dönüş hızı: -2800 U/mintool konik: BMT 65 Üst taret aleti hodler:: 12 hızlı dönüş X ekseni: 16 m/dakika dönüş Z-ekseni: 24 m/dakika Genel boyut: 4000 x 2000 x 2100 mm makinenin ağırlığı ca.: 6700 tBu reklam için veri, LogoTech oHG'nin yazılım çözümü ModulMWS ile oluşturulmuştur.

Turlama çapı: 370 mm dönüş uzunluğu: 712 mmKontrol: Siemens Sinumerik 828D x ekseni: 255 mmz ekseni: 790 mmToplam güç gereksinimi: kW makinesinin ağırlığı ca.: 3100 kgMakinenin boyutları ca.: mBu reklam için veriler, LogoTech oHG'nin yazılım çözümü olan ModulMWS ile oluşturulmuştur.

turning diameter: 420 mm turning length: 1350 mm spindle passage: 101 mm control: Siemens SL 828D ShopTurn number of controlled axis: 4 turning speed range: 3000 U/min power requirement: 22/18,5 kW rapid speed: 30 m/min number of tapers in turret head: 12/24 BMT 65 number of driven tools in turret: 12 BMT 65 Spindel speed of driven tools: 5000 U/min Spindelpower on driven tool: 7,5/5,5 kW y-axis: +/- 65 mm tail stock: MT-5 weight: 8,0 t dimensions: 5,7 x 2,3 x 2,32 m Heavy CNC- lathe with driven tools and Y- Axis in very good condition. First instalation: 03/2023 Appr. 5400 h Power on. - 2x 3-jaw chuck Ø 325 + 400 mm - some fixed tool holders - Tool pre- setter - chip conveyor - 4x driven tool holders - 2 + 2 driven toolholders with Capto C4 - oildust collector - band filter system with appr. 1000 ltr. - hydr. steady moveable wit turret SMW Autoblock SLU-X3.1 (Ø 20- 165 mm) - 3 colour  ...

x-travel: 1050 mm y-travel: 570 mm z-travel: 510 mm Control: Siemens 828D Main spindle:: turning speed range - main spindle: 12000 min/-1 power capacity - main spindel: 16,5 / 11 kW max. Torque: 141 Nm tool taper: BT 40 distance spindle /table: 150 - 775 mm work table:: table surface area: 1300 x 570 mm max. table load: 1000 kg tool magazin:: number of toolpositions: 40 pos. tool taper: BT 40 max. tool diameter: 80 mm max. tool length: 300 mm max. tool weight: 8,0 kg change-time tool to tool: 1,2 sec change-time chip to chip: 3,2 sec feeds:: rapid traverse ( X / Y / Z ): 36 / 36 / 30 m/min workpiece height max.: 590 mm total power requirement: 40,9 kVA weight of the machine ca.: 6,5 t dimensions of the machine ca.: 2,5 x 3,1 x 2,98 m 3-axis vertical CNC machining center - Siemens 828D CNC control and workshop-oriented programming support Shop Mill - 40-tool tool changer (BT 40) - Bas ...

control: FANUC Series 31i Model 5 turning diameter: 540 mm turning length: 1040 mm c-axis: indexing: 0.001 ° turning speeds: -5000 U/min tool taper: ASA A2-6 Top turret tool hodler:: 12 y-travel: 170 (+/- 85) mm rapid traverse X-axis: 36 / 24 m/min rapid traverse Z-axis: 36 / 26 m/min Overall size: 8000 x 3000 x 3000 mm weight of the machine ca.: 12000 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 300 mm turning length: 600 mm control: FANUC, 18i-TB turning diameter over bed slide: 230 mm travel x1: 165 mm travel z1: 700 mm travel x2: 190 mm travel z2: 720 mm travel -y axis: +/- 50 mm main spindle bore: 76 mm main spindle speed: 5.000 U/min main spindle drive: 22 kW max. torque on the spindle: 208 Nm sub spindle bore: 76 mm sub spindle speed: 5.000 U/min sub spindle drive: 22 kW max. torque on the spindle: 208 Nm tool turret: 2 x 12 Stat. number of driven tool stations: 2 x 12 speed of driven tools: 5.000 U/min max. torque: 47 Nm work piece power: 5,5 kW C-axis resolution: 0,001 ° rapid traverse x + z axis: 20 / 40 m/min rapid traverse y-axis: 7,5 m/min total power requirement: 68,4 kVA Accessories: collet fixture make KITAGAWA, CRS 66, on main spindle, hydr. 3-jaw chuck make KITAGAWA, BB 208, 210 mmø, on sub spindle, various tool holders for turret ...

CNC dikey işleme merkezi Tür: DNM 400 Üretici: Doosan Yıl: 2010 Kontrol: Fanuc i Serisi X: 635 mm Y: 435 mm Z: 510 mm Masa boyutu: 790 × 435 mm Maksimum masa yükü: 400 kg Araç dergisi: 20 pozisyon Maksimum mil hızı: 8000 rpm/h Mil gücü: 15 kW Mil konikliği: ISO 40 Makine ağırlığı: 5000 kg Boyutlar: 1962 × 2093 × 2509 mm Çip konveyörü Makine iyi durumda, tam işlevsel, güç altında Daha fazlasını buradan bulabilirsiniz - / Bizimle şu adresten iletişime geçin:

Fotoğrafta saatler Daha fazlasını buradan bulabilirsiniz - / Bizimle şu adresten iletişime geçin:

x-travel: 2100 mm y-travel: 1500 mm z-travel: 1500 mm Number of pallets: 2 size of pallet: 1250 x 1250 mm dimension of workpiece: 2000 x 1725 (H) mm feeds: 0,1 - 12000 mm/min rapid traverse: 24000 mm/min spindle motor: 26/22 kW spindle turning speed range: 10 - 6000 U/min Tool magazine positions: 60 fach tool taper: BT 50 control: Fanuc 31i-MB workpiece weight: 3000 kg total power requirement: 69 KVA total wight: 29 t dimensions of the machine ca.: 10,5 x 5,8 x 4,1 m - CNC control FANUC 31i-MB 4-Axis (X,Y,Z,B) - 2 pallets 1250mm - chip conveyor - High pressure through spindle coolant (Hydtec) - ATC 60 tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1100 mm y-travel: 650 mm z-travel: 550 mm Control: Fanuc 31i-MB distance spindle nose and table: 150 - 700 mm Main spindle:: turning speed range - main spindle: 10 - 20000 min/-1 power capacity - main spindel: 22 / 11 kW max. Torque: Nm tool taper: BT 40 work table:: table surface area: 1200 x 650 mm max. table load: 800 kg Tool-Presetter:: number of toolpositions: 30 pos. tool taper: BT 40 feeds:: rapid traverse ( X / Y / Z ): 30 m/min feed speeds: 1500 mm/min total power requirement: 48,55 kVA weight of the machine ca.: 10 t dimensions of the machine ca.: 3,65 x 3,30 m CNC Machining Center Vertical - CNC control Fanuc 31i-MB - ATC 30-fold (BT 40) - Chip Conveyor - Tool Measure - Mold Optio n - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 376 mm turning length: 760 mm control: Fanuc x-axis: 260 mm z-axis: 830 mm total power requirement: kW weight of the machine ca.: 6000 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

New CoBot Brand: Doosan Robotics Type: H2017 The video shows a DOOSAN H2017 CoBot in cooperation with a CNC machining center VITAP K2 2.0 with automatic package. The Doosan Robotics H2017 Carries loads up to 20kg and works with a reach up to 1700mm. Including robot column, vacuum gripper, commissioning, pre-assembly, interface, training, safety technology and CE certification, the recommended retail price is approx. 65,000? net. The time required for teaching new parts is about one hour - always depending on the complexity of the work steps. The optimal area of application for this CoBot is recurring small batches and series that utilize the robot over several shifts. Have you become curious? Then please feel free to contact us about the topic!

Kontrol: Üretim: FANUC 21-M x-seyahat: 1020 mmy-yolculuk: 510 mmz-yolculuk: 575 mmtable boyutu: 1200 x 500 mm mil dönüş hız aralığı: 60-8000 U/mintool magazin:: 24 makine ağırlığı ca.: 7.5 tHEIDENHAIN TNC-4264. eksen için hazırlanmıştır www.marcels-maschinen.ch Bu reklamın verileri, LogoTech oHG'nin yazılım çözümü ModulMWS ile oluşturulmuştur.

x-seyahat: 1300 mmy-yolculuk: 670 mmz-yolculuk: 625 mmKontrol: Siemens Sinumerik 828D toplam güç gereksinimi: kW makinenin ağırlığı yaklaşık 8500 kgMakinenin boyutları ca.: mBu reklamın verileri, LogoTech oHG'nin yazılım çözümü olan ModulMWS ile oluşturulmuştur.

turning diameter: 376 mm turning length: 1245 mm control: FANUC i-Series turning diameter over bed: 376 mm x-travel: 230 mm z - travel: 1350 mm rapid travel x/y/z: 24/30 m/min main spindle speeds:: 2800 spindle motor: 35 / 26 kW max. torque on the spindle: 1613 Nm spindle passage: 102 mm total power requirement: 33,91 Kva weight of the machine ca.: 7 t dimensions of the machine ca.: 4,6 x 2,11 x 2,3 m Equipped with: - Fanuc i-Series CNC control - C-axis - 3-jaw chuck, 304 mm diameter - 12-station tool turret - Tailstock - Chip conveyor - CE Only 2,300 spindle hours The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turlama çapı: 540 mm torna uzunluğu: 1520 mmkontrol: Fanuc 18i-TB toplam güç gereksinimi: kW makinenin ağırlığı ca.: 15500 kgmakinenin boyutları ca.: mBu reklam için veriler, LogoTech oHG'nin yazılım çözümü olan ModulMWS ile oluşturulmuştur.

travel -x axis: 1.050 mm travel -y axis: 570 mm travel -z axis: 510 mm control: HEIDENHAIN - TNC620 number of spindle speeds: 12.000 U/min tool taper: BT 40 table dimension (L x W): 1300 x 570 mm numbers of positions in the tool changer: 30 Milling machining centers - vertical | DOOSAN - DNM 5700 equipped with 30-way tool changer, ITC cooling system and chip conveyor. The machine only has 13.600 spindle hours. The machine is in a well-maintained condition and has exclusively worked on Aluminum and Plastics. The machine video from the production plant will be shared on request. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DNM5700 | DNM-5700 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1270 mm y-travel: 670 mm z-travel: 625 mm CNC-control: SIEMENS 828 D table-size: 1300 x 670 mm max. table load: 1000 kg spindle taper ISO: SK 40 spindle turning speed range: 12000 U/min feed stepless: 8000 mm/min rapid traverse: 36 / 36 / 30 m/min drive capacity - spindle motor: 18,5 kW tool change unit: 30 Pos. total power requirement: 40 kVA weight of the machine ca.: 8,5 t dimensions of the machine ca.: 3,20 x 2,45 x 2,40 m chip conveyor: 4,10 x 0,65 x 1,50 coolant: 3,60 x 2,20 x 0,80 m - Siemens 828D CNC control - Direct drive spindle: 12,000 rpm - Two-contact clamping system in the BIG-PLUS spindle (SK40 spindle taper) - Oil cooling of the spindle head - Thermal compensation system (software) - Tool magazine: 30 tools - RENISHAW tool and workpiece probe - Internal cooling via the spindle centre: 12 bar - External cooling with air and cooling lubricant - Internal thread spi ...

Daha fazlasını buradan bulabilirsiniz - / Bizimle şu adresten iletişime geçin:

x-travel: 900 mm y-travel: 550 mm z-travel: 500 mm Control: FANUC 31i-b tool change unit: 30 pos. table-size: 1.000 x 500 mm table weight: 700 Kg spindle taper: HSK - A 63 number of spindle speeds: 20.000 U/min/rpm Spindle power: 22 Kw Working hours: 10.816 h Spindle hours: 2.352 h Internal cooling system: Distance between table and spindle: 150/690 mm chip conveyor: kW weight of the machine ca.: 9 t dimensions of the machine ca.: 2.530 x 2.900 x 3.064 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1030 mm turning diameter over slide rest: 800 mm turning length: 3200 mm turning diameter: 900 mm control: FANUC 31i B : 165 mm spindle cone: ASA A1-15 travel -x axis: 470 mm travel -z axis: 3235 mm rapid travel - longitudinal/face: 12 / 10 m/min Measuring Speed: 3 - 1500 1/min spindle drive: 45 / 37 kW max. workpiece weight between centres: 7300 kg max.workpiece weight:each extra steadyrest: 1600 kg tail stock: tailstock adjustment: 3135 mm tailstock quill diameter: 160 mm tailstock quill stroke: 150 mm tailstock quill taper MT: 6 total power requirement: 64,44 kVA weight of the machine ca.: 22 t dimensions of the machine ca.: 7,36 x 2,77 x 2,78 m High-precision turning centre - 3-jaw chuck dia. 800 mm - FANUC 31iB CNC control - Tailstock - Hydraulic steady rest - 12-station tool turret (32 x 32 mm) - Chip conveyor - Coolant system - Tool setter - CE The da ...

x-travel: 730 mm y-travel: 730 mm z-travel: 880 mm Control: FANUC 31i-B spindle turning speed - stepless: 15000 U/min spindle taper: BT 40 Big Plus spindle motor: 18,5 / 30 kW pallet table size: 500 x 500 mm workpiece weight: 500 kg distance spindle center to table: 80 - 810 mm Rapid Travel X / Y / Z-Achse: 60 m/min dimension of workpiece: 800 x 1000 mm total power requirement: 80 kVA weight of the machine ca.: 11,5 t dimensions of the machine ca.: 5,45 x 2,68 x 2,88 m Horizontal CNC machining centre - CNC control FANUC 31i-B - Tool changer 60-fold (BT 40 Big Plus) - 2 pallet changer(pallet 24-M16) - Table / Pallet indexing Full B axis. - Pullstud Nikken PS-806. Maximum torque 229.9/ 206.9/ 147.2/ 119.4N.m. - Coolant/Filtering Unit - Chip Conveyor - Exhauster The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 830 mm swing diameter: 920 mm turning height: 750 mm control: Fanuc 0i-TF travel -x axis: 495 mm travel -z axis: 780 mm turning speed range - spindle: 1940 U/min drive capacity - spindle motor: 37 / 30 kW chucking diameter: 380 mm turret (x-stations): 12 pos rapid traverse X-axis: 20 m/min rapid traverse Z-axis: 20 m/min feed: mm/min spindle diameter in front bearing: 160 mm c-axis: 360° (in 0,001°) workpiece weight: 870 kg total power requirement: 61,78 kVA weight of the machine ca.: 9,5 t dimensions of the machine ca.: 2,1 x 2,7 x 3,6 m - Control unit FANUC 0i-TF - Tool Turret 12-fold - Coolant system - Foot switch - Automatic safety switch Front door & full enclosure - Work area lighting The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.