testere kullanılmış satılık (1,277)

: neu : 2025 : 060076 : prompt, Zwischenverkauf v : Türkei : 14200 €: 272.64 €: 1 : 1 : Schwenkrahmen : 4160x34x1,1 mm: 15 - 120 m/min: 320 mm: 320 mm: 450x320 mm: rund 320 mm, quadrat 320 : rund 320 mm, quadrat 320 : rund 320 mm, quadrat 320 : rund 320 mm, quadrat 300 : rund 230 mm, quadrat 220 : 860 mm: 0.37 kW: 2.2 kW: 0.12 kW: 2230 mm: 1150 mm: 2140 mm: 1030 kgDouble mitre cuttingInverterSaw blade 34Hydraulic viceHeavy duty gearboxHydromechanic blade tensionSaw band brushDigital read out for mitre angleCoolant equipmentOperating manual in English or GermanOPTIONS:Roller tables and band saw blades on requestThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 11100 €: 213.12 €: Schwenkrahmen : 3660x27x0,9 mm: 20-100 m/min: 320 mm: 300 mm: 320x300 mm: 640 mm: 0.37 kW: 2.2 kW: 0.12 kW: 1900 mm: 850 mm: 1300 mm: 770 kgRoller material feed with manual adjustable length stop with limit switchblade brushcontrol panelheight adjustment bar with limit switchhydromechanical blade tensioninverterhydraulic vicecoolant pumpsaw bladesecurity switch1,2 meter roller tableusers manual in GERMAN or ENGLISCHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data (Velox II / III) Saw blade diameter: 300 mm to 350 mm. Speeds: Very high (typically approx. 1,700 / 3,400 rpm), as it is designed for non-ferrous metals. Cutting range (90° round): approx. 100 mm to 120 mm. Cutting area (90° flat): approx. 180 x 50 mm to 200 x 80 mm. Mitre: Can be swivelled on both sides (usually 45° - 90° - 45°), often with fixed stops. Motor power: approx. 1.5 kW to 2.2 kW.Roller tracks approx. 4000mm Auction-ID: A7-44493-24

Kasto Hack Saw Machine Weight: 500kg Auction-ID: A7-44493-119

Mössner Rekord SV 420 Cutting Capacity: Projection (width): 410 mm to 415 mm. Passage height (max.): 265 mm. Saw blade & rollers: Roll diameter: 420 mm. Saw blade length: 3150 mm to 3260 mm (standard dimension often specified as 3210 mm). Saw band width: 3 mm to 16 mm. Work table: Table size: 600 x 600 mm. Swivel: 15° to 30° to the left and right. Table height: approx. 1020 mm from the floor. Drive & Speed: Cutting speeds: Depending on the model variant, 8 stages (approx. 18–562 m/min) or continuously variable via manual transmission (30–2000 m/min) Auction-ID: A7-44493-51

Auction-ID: A1-40973-54

Table size: 600 mm x 605 Auction-ID: A7-44493-225

cutting diameter: 305 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Unknown Auction-ID: A7-44493-28

Bergschmid Band Saw Auction-ID: A7-44493-131

: neu : ca. 10 Wochen ab Auftrags : Italien : 9420 €: 181.81 €: Schwenkrahmen : 2450x27x0,9 mm: 35/70 m/min: 220 mm: 200 mm: 250x150 mm: rund 160 mm, quadrat 140 : rund 90 mm, quadrat 90 mm : 800 mm: 0.7 kW: 1330 mm: 1300 mm: 1880 mm: 350 kghydraulicvicesaw beam moves up and down by hydraulic cylinderfast descentutomatic fast up/down conrolled by feeler pinadjustable pressure according to section and type of materialdouble safety buton for cycle start2 speedscoolant equipment_CUTTING CYCLE_Vice locking, Quick bow pull-down hydraulically operated, Blade rotation and cooling liquid start-up,Working pull-down, end of the cutting cycle, Stop of blade rotation and supply of cooling liquid,Quick bow lift-up, Stop of bow upwards movement, vice unlocking if selected.OPTION:Adjustable vice pressure (R1) EUR 403,--The data for this ad was created with ModulMWS - the software solution of Logo ...

: neu : ca. 4 Monate ab Auftragse : Türkei : 53900 €: 1018.71 €: Doppelsäulenführung : 7000x41x1,3 mm: 15 - 120 m/min: 560 mm: 540 mm: 810 x 530 mm: rund 520 mm, quadrat 520 : rund 520 mm, quadrat 520 : rund 330 mm, quadrat 330 : 875 mm: 1.1 kW: 4 kW: 0.12 kW: 3850 mm: 1700 mm: 2450 mm: 3400 kghydraulic vicedigital readout for scale of bending anglehydraulic clamping of sawing armturning of sawing arm by handcontinuously variable down speed of sawing armautomatic sawing frame lifting after cuttingsensitive cutting pressure adjustment subject to material conditionhydromechanic tape tension readout by manometermobile control panelangular geared conical heavy duty gear unitdriven chip brushtape guiding by hard metal sheet plates and rollsautomatic tape break lockcoolant equipmentHYDRAULIC UPLIFT OF SAWING FRAMEuser manual in GERMAN or ENGLISH(roller table see photo - optional avai ...

: neu : ca. 4 Monate ab Auftragse : Türkei : 61300 €: 1158.57 €: Doppelsäulenführung : 6000 x 41 x 1,3 mm: 20 - 100 m/min: 560 mm: 560 mm: 600 x 560 mm: 810 mm: 2.2 kW: 5.5 kW: 0.12 kW: 3250 mm: 2200 mm: 2350 mm: 4500 kgHydromechanical band tensionContinuously variable bandspeed (inverter)Linear guideFeed vice with servo drive with 700 mm stroke or 9.999 mm for multi-strokeControl panel with touchscreen (50 cutting lengths / 30 programs)Planetary gearboxSaw pressure adjustmentBand deflection sensorCoolant deviceChip brushOptical height adjustmentOPTIONEN: Hydraulicupper clamping Micro cooling unit Roller table3 m Laser cutting lineThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Italien : 10460 €: 200.83 €: Schwenkrahmen : 3010x27x0,9 mm: 35/70 m/min: 260 mm: 240 mm: 330x120 mm: rund 200 mm, quadrat 190 : rund 120 mm, quadrat 115 : 830 mm: 1600 mm: 1200 mm: 1800 mm: 390 kghydraulicvicesaw beam moves up and down by hydraulic cylinderfast descentautomatic fast up/down conrolled by feeler pinadjustable pressure according to section and type of materialdouble safety buton for cycle start2 speedscoolant equipment_CUTTING CYCLE_Vice locking, Quick bow pull-down hydraulically operated, Blade rotation and cooling liquid start-up,Working pull-down, end of the cutting cycle, Stop of blade rotation and supply of cooling liquid,Quick bow lift-up, Stop of bow upwards movement, vice unlocking if selected.Option:Adjustable vice pressure (R1) EUR 403,--The data for this ad was created with ModulMWS - the software solution of LogoTech oH ...

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 104600 €: 1976.94 €: Doppelsäulenführung : 10430x54x1,6 mm: 20-100 m/min: 750 mm: 1300x700 mm: rechteck 850 x 750 mm : rechteck 570 x 750 mm : rechteck 850 x 750 mm : 930 mm: 4 kW: 11 kW: 0.12 kW: 5500 mm: 2280 mm: 3400 mm: 8500 kgHydraulic viceDigital display for angle indicationHydraulic saw arm clampingManual saw arm rotationContinuously adjustable saw arm lowering speedAutomatic saw frame lifting after cuttingSensitive cutting pressure regulation depending on material propertiesHydromechanical blade tension readable via pressure gaugeMobile control panelHeavy-duty, helical-toothed conical gearDriven chip brushBlade guidance via carbide plates and rollersAutomatic blade breakage protectionCoolant systemHydraulic saw frame liftingOperating instructions in GERMAN or ENGLISHOPTIONS:Roller tables and band saw blades on requestThe data fo ...

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 29000 €: 553.9 €: Doppelsäulenführung : 5000x34x1,1 mm: 15-120 m/min: 360 mm: 360 mm: 640x360 mm: rund 360 mm, quadrat 360 : rund 250 mm, quadrat 250 : 860 mm: 1.1 kW: 3 kW: 0.12 kW: 3000 mm: 1850 mm: 2000 mm: 1950 kghydraulic vicedigital readout for scale of bending anglehydraulic clamping of sawing armturning of sawing arm by handcontinuously variable down speed of sawing armautomatic sawing frame lifting after cuttingsensitive cutting pressure adjustment subject to material conditionhydromechanic tape tension readout by manometermobile control panelangular geared conical heavy duty gear unitdriven chip brushtape guiding by hard metal sheet plates and rollsautomatic tape break lockcoolant equipmentHYDRAULIC UPLIFT OF SAWING FRAMEuser manual in GERMAN or ENGLISH(sample photo - roller table see photo - optional available, additional p ...

dimensions of saw-band: 3650x27x0,9 mmspeed: 15/100 m/mincapacity 90 degrees: round: 280 mmcapacity 90 degrees: square: 260 mmcapacity 90 degrees: flat: 330x260 mmcapacity 45 degrees: round: 260 mmcapacity 45 degrees: square: 250 mmcapacity 45 degrees: flat: 270x200 mmcapacity 60 degrees: round: 180 mmcapacity 60 degrees: square: 170 mmcapacity 60 degrees: flat: 170x170 mmtotal power requirement: 2,2 kWweight: 1240 kgvice: 340 mmdimensions: 2020x2040x1740 mmElectro-hydraulic fully automatic band saw with additional, semi-automaticFunction, for cuts from 0 ° to 60 ° left.Compact machine with the new Windows CE based MEP-50 controllerand 7 touch-screen display for managing all machine parameters.Easy operation and control of all cutting parameters in real time.Material feed with stepper motor via ball screw, which are mounted on opposite ball bearings,Single stroke 600 mm - repeatable to ...

Testere bıçağı çapı: 400 mm kapasite 90 derece: yuvarlak: 130 mm kapasite 90 derece: düz: 305 x 20 mm 45 derece kesme aralığı : düz: 245 x 30 mm kesme hızı: 13/26 m/min-feed hızı: 0 - 1000 mm/dk Bu reklamın verileri, LogoTech oHG'nin yazılım çözümü ModulMWS ile oluşturulmuştur.

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 46400 €: 886.24 €: Doppelsäulenführung : 6800x41x1,3 mm: 20-100 m/min: 560 mm: 820 x 540 mm: rechteck 550 x 540 mm : rechteck 360 x 540 mm : rechteck 550 x 540 mm : 880 mm: 1.1 kW: 4 kW: 0.12 kW: 3800 mm: 1750 mm: 2350 mm: 3200 kghydraulic vicedigital readout for scale of bending anglehydraulic clamping of sawing armturning of sawing arm by handcontinuously variable down speed of sawing armautomatic sawing frame lifting after cuttingsensitive cutting pressure adjustment subject to material conditionhydromechanic tape tension readout by manometermobile control panelangular geared conical heavy duty gear unitdriven chip brushtape guiding by hard metal sheet plates and rollsautomatic tape break lockcoolant equipmentHYDRAULIC UPLIFT OF SAWING FRAMEuser manual in GERMAN or ENGLISH(roller table see photo - optional available, additional price ...

Hydropneumatic semi-automatic - Mitre left/right 45° - Head oblique cuts up to 45° (Schifter) - Ball-bearing table - Pneumat. Double clamping device - Machine base with mist spraying device - Chip extraction nozzle on saw blade protective cover Saw blade diameter 350 mm Cutting range at 90 degrees: around 120 mm Cutting range at 90 degrees: square 110 mm Cutting range at 90 degrees: flat 200x88 mm Cutting range at 45 degrees: around 115 mm Cutting range at 45 degrees: square 110 mm Cutting range at 45 degrees: square 150x80 mm Total power requirement 1.5/1.8 kW Machine weight approx. 0.27 t Dimensions L x W x H 1.1 x 0.95 x 1.7 m Auction-ID: A7-44032-614

saw blade diameter: 350 mmcapacity 90 degrees: round: 120 mmcapacity 90 degrees: square: 110 mmcapacity 90 degrees: flat: 200x88 mmcapacity 45 degrees: round: 115 mmcapacity 45 degrees: square: 110 mmcapacity 45 degrees: square: 150x80 mmtotal power requirement: 1,5/1,8 kWweight of the machine ca.: 0,27 tdimensions: 1,1 x 0,95 x 1,7 m- Hydropneumatic semi-automatic - Miter left/right 45° - head diagonal cuts up to 45° (shifter) - Ball bearing table - pneumatic. Double clamping device - Machine base with fog spray device - Chip extraction socket on the saw blade protective hoodThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Testere bıçağı çapı: 400 mm kapasite 90 derece: yuvarlak: 135 mm kapasite 90 derece: kare: 130 mm: 200 x 80 mm testere bıçağı dönüş hızı: 12 / 25 m/min. toplam güç gereksinimi: kW makinenin ağırlığı ca.: 0,75 makine ölçüsü: 1,2 x 0,9 x 1,8 mSoğuk dairesel testere- Yarı otomatik- Hidrolik kelepçe- Soğutma sistemi- Koruyucu kapak- iyi durumdaBu reklamın verileri, LogoTech oHG'nin yazılım çözümü ModulMWS ile oluşturulmuştur.

kesme çapı: 260 mm bant uzunluğu: 450 x 40 x 2 mm kapasite 60 derece: kare: 240 mm: 260 x 180 toplam güç gereksinimi: 2,0/2,6 kW makinenin ağırlığı ca.: 1,4 boyut: 2,1 x 1,7 x 1,0 mBu reklam için veri, LogoTech oHG'nin yazılım çözümü ModulMWS ile oluşturulmuştur.

kesme çapı: 320 mm bant uzunluğu: 535 x 40 x 2,0 mm kapasite 90 derece: kare: 300 mm kapasite 90 derece: düz: mm kesme hızı: m/minno. Vuruş sayısı: 45 - 62 - 90 - 125 Hub/minimum toplam güç gereksinimi: 3,0 kW makinenin ağırlığı: 0,35 KgBoyutlar: 1,4 x ,4 x 1,2 mHidrolik yay testere: - Soğutma sistemi - Acil durdurma cihazıBu reklamın verileri, LogoTech oHG'nin yazılım çözümü ModulMWS ile oluşturulmuştur.

Auction-ID: A3-40494-5147

Equipped with: IMET VTF 500 SHI-E vertical metal band saw, semi-automatic vertical band saw, hydraulically driven, with electronic control panel, mitre cuts from 0° to 45° left and right, hydraulic prestressing clamp with quick start, integrated with the rotation of the saw frame with simple stops at 0°, 45° left and 45° right, graduated plate for reading different angles, saw frame on hardened and chromed guides, Saw guides with carbide pads, additional bearing for saw blade alignment, electronic frequency converter for variable saw blade speed and motor with additional servo ventilation, control device for the correct positioning of the saw blade, saw blade tension 2100 kg/cm², with microswitch for control of the saw blade tension, cutting capacity: round up to 330 mm, square up to 330 mm and rectangular up to 300x500 mm. Auction-ID: A1-41987-6

Auction-ID: A1-41987-82

Dust extraction, Typhoon, 380v. Auction-ID: A1-41987-88

Dimensions of the saw blade 300 x 3.4 x 32 mm Cutting range – at 90° // Around 90 mm Square 80 mm Pneumatic vises Automatic material feed position-controlled Single stroke up to approx. 1000 mm Multiple strokes swivel control panel with CNC control mep Bj der Säge 2010 Bj Magazine 2013, this was specially equipped with a transfer station The system can be loaded, adjusted, then run and the workpieces can be fed into a magazine, e.g. on a table. The automatic feed has 1000mm, the length can be adjusted from a few mm to several meters. from foundation, dismantling and loading by the buyer Auction-ID: A7-40841-11

Equipped with: WISENT 530HA Semi-automatic Metal band saw, year of construction 2020, double mitre (left and right swiveling), voltage 3Ph / 400Volt, motor power 2.2kW, cutting speed variable 20~80 m/min, clamping opening 545 mm, coolant system, mitre device L+R 45 – 0 – 60°, dim. saw blade mm. 3,770 x 34 x 1.1, weight approx. 700 kg, capacity round 90° 355 mm, square 90° 300 x 300 mm, rectangle 90° 490 x 300 mm, round 45° L 290 mm, square 45° L 250 x 250 mm, rectangle 45° L 250 x 250 mm, round 45° R 350 mm, hydraulic clamp, infinitely adjustable saw feed, automatic saw arch lift with height adjustment and coolant installation, The machine is suitable for heavier and continuous sawing up to Ø 355mm. Auction-ID: A1-41987-7