takım tezgahları için aksesuarlar kullanılmış satılık (1,910)

T-Max P Turning Cutting Head ISO: SL-PDJNR-40-15HP Product data: - Angle of Adjustment - 93 deg - Main cutting edge angle - 3 deg - Mounting type cutting insert - P: clamp with pin through hole Part 2 of the Tool Interface Identifier(CUTINT_MASTER) DNMG 150608 - Adapter interface machine direction - SL head (screw mounted) -size 40 - Immersion angle, max. - 27 deg - Body angle, workpiece side - 0 deg - Body angle, machine side - 0 deg - Maximum cantilever length - 40 mm - Cutting direction - R - Code for coolant supply - 1: axial concentric entry - Coolant leakage - 7: axial inclined focused exit with nozzle - Coolant pressure - 80 bar - Pick-up diameter - 40 mm - Function length - 40 mm - Functional width - 27 mm - Functional height - 0 mm - Orthogonal rake angle - -6 deg - Tilt angle - -7 deg - Torque - 5 Nm - Tool design - steel - Mass (weight) - 0.184 kg per piece - Insert desig ...

Clamping table top with mandrel for hobbing machine Ø 340 mm Auction-ID: A1-48483-100

The mechanical zero-setting device is the standard version of our mechanical zero adjuster. It has a height of 50 mm and is suitable for precise Position determination of workpiece surfaces or tool lengths in the Z-direction on milling or lathes. Auction-ID: A1-48483-107

Various slotting knives from Frömag as a set -> 6x 6P9 - 15° Ø18-20 - A61 -> 2x 6P9 - 15° Ø17-18 - A60H / A60 -> 1x P59 - 15° - A-SO-60 -> 2x P59 - 15° - A51 -> 3x 4P9 - 15° Ø13-15 - A40 -> 1x 4P9 - 15° Ø12 - A40 -> 1x 3P9 - 15° Ø13-15 - A30 -> 2x 6 - Ø18-20 Individual acceptance also possible, just ask Auction-ID: A1-48483-127

Changing gear set according to pictures Interchangeable wheels - number of teeth: Z 20 / 22 / 24 / 25 / 27 / 33 / 38 / 40 / 43 / 46 / 47 / 49 / 50 / 53 / 54 / 55 / 58 / 59 / 63 / 66 / 77 / 78 / 84 R / 90 / 95 / 96 / 100 / 102 / 104 / 108 / 110 / 112 / 116 / 124 / 128 Auction-ID: A1-48483-60

Swivel Mandrel + Holder OD 105 Application For quick comparison measurement of bores during series inspection. Due to the looped sleeve with a small undersize, the mandrel is drilled into the hole. guided and centered. Execution - Measuring contacts and measuring needle made of carbide (wear-resistant) - Measuring mandrel from Ø 130 mm can be supplied as a cross sleeve or skid-cross sleeve - Standard version Advantage - Easy to use - Minimal measurement time - Maximum measurement reliability - Robust and reliable - Matched to the desired bore diameter + tolerance Auction-ID: A1-48483-72

Adapter Coromant Capto - Weldon ISO: C8-391.20-08 070 Product data: - Machine direction adapter interface - Coromant Capto (bolt and segment clamping) -size C8 - Flat Run Adjustment - Weldon -metric - 8 - Code for coolant supply - 3: axial concentric and radial entry - Coolant leakage - 1: axial concentric exit - Coolant pressure - 20 bar - Functional diameter - 55 mm - Mounting diameter - 80 mm - Holder diameter, workpiece side - 8 mm - Angular position mounting, workpiece side - 0 deg - Clamping length - 36 mm - Function length - 70 mm - Body diameter - 20 mm - Length of body diameter - 4 mm - Speed, max. (-81, -82: Maximum speed) - 14,000 rpm - Tool design - steel - Mass (weight) - 2,126 kg per piece Auction-ID: A1-48479-24105

A package of Sandvik Coromant inserts is sold here. New and a few used ones are among them. Auction-ID: A1-48479-24263

V-blocks with clamps, which can be used as a tool for holding cylindrical workpieces can be used for measurements or processing. The V-blocks shown are available in different sizes and are used as Set offered. Each block has a U-shaped clamp with a threaded spindle, to fix the workpiece. They are typically used in metalworking and metrology. Auction-ID: A1-48483-125

Coromant Capto on shrink chuck ISO: C8-391.19-16 095 Product data: - Machine direction adapter interface - Coromant Capto (bolt and segment clamping) -size C8 - Axial clamping adjustment - Cylindrical clamping (shrink fit) -metric: 16 - Code for coolant supply - 3: axial concentric and radial entry - Coolant leakage - 1: axial concentric on exit - Coolant pressure - 80 bar - Functional diameter - 55 mm - Mounting diameter - 80 mm - Receptacle diameter, workpiece side - 16 mm - Angular position mounting, workpiece side - 0 deg - Function length - 95 mm - Body diameter - 27 mm - Body diameter length - 43.8 mm - Speed, max. (-81, -82: Maximum speed) - 14,000 rpm - Tool design - steel - Mass (weight) - 2,018 kg per piece Auction-ID: A1-48479-24101

Product information \"Henninger Schnellauf - Milling Spindle Type 814 \" However, the Henninger quick-opening milling spindles are not highly sensitive devices. They are suitable for everyday production The Henninger quick-opening milling spindles are not only used with carbide milling cutters or when processing non-ferrous metals, but also for processing steel and casting. Even if the machines reach the required speeds, , people like to use the high-speed milling spindle to clean the machines. and to prevent dimensional deviations due to heating of the headstock. - Type: Quick-run - Milling spindle type 814 - Tool holder SK 40 - Tool holder collets: yes - Collet range: Ø 4 - 25 mm - Gear ratio: 1:6 - Maximum speed ED 10%: 12,000 1/min - Maximum speed ED 80%: 10,000 1/min Auction-ID: A1-48483-31

Fork clamp with nose, DIN 6315 GN, slot width×whole length: 18X250mm >> Technical description >> --> Slot width: 18mm --> full length: 250 mm --> for clamping screws: 5/8; M16; M18 --> Height: 30mm --> Width: 50mm --> Type: 6315GN --> Standard: DIN 6315 GN --> Product Type: Clamp -> Weight: 1.80kg per piece Auction-ID: A1-48483-97

A package of indexable inserts LMT Fette is sold here. ! MINT CONDITION One package is sold here = 5x packs = 43 pieces --> Brand LMT Greases, Indexable Inserts --> LMT code APKT 1604 - 1067507 (LC240T) Auction-ID: A1-48479-26015

Lots of accessories, good condition. Auction-ID: A1-48483-3

Centering tip with bead nut Auction-ID: A1-48483-101

This machine is set up for pushing and pulling forehead and helical wheels according to the rolling process. By means of a special device, gears can also be produced using the hand-cut process. Normally, cutting wheels with approx. 4\" = 100 m/m pitch circle diameter . Since the machine works according to the rolling process, only a cutting wheel of a certain module, all the number of teeth can be cut. Dimensions for external gearing: - Largest wheel diameter for Strin wheels: 1000 mm - Largest wheel diameter for helical wheels: 750 mm - Largest tooth width: 160 mm Dimensions for internal gearing: - Largest wheel diameter for Strin wheels: 750 mm - Largest wheel diameter for helical wheels: 750 mm - Largest tooth width: 130 mm - Largest pitch to be planed in steel: 8.5/8.6 module - Hole of the table spindle : 160 mm - Number of ram strokes: 6 - Number of cut ...

Coromant Capto on cutter mandrel mount ISO: C8-391.05C-16 050 Product data: - Adapter interface machine direction -Coromant Capto (bolt and segmentclamping) -size C8 - Axial runout adjustment - Arbor -ISO 6462 -A/B (center bolt/washer) -metric: 16 - Code for coolant supply - 3: axial concentric and radial entry - Coolant leakage - 4: axial concentric on circle - Coolant pressure - 80 bar - Functional diameter - 55 mm - Mounting diameter - 80 mm - Receptacle diameter, workpiece side - 16 mm - Angular position mounting, workpiece side - 0 deg - Functional length - 50 mm - Body diameter - 80 mm - Length body diameter - 50 mm - Torque - 22 Nm - Speed, max. (-81, -82: Maximum speed) - 14,000 rpm - Tool design - steel - Mass (weight) - 2,095 kg per piece Auction-ID: A1-48479-24094

A package of Sandvik Coromant inserts is sold here. New and a few used ones are among them. - CNMM 12 04 04-71 - (431-71) 415 P-K15 (1x piece) - N150.2-300-5E (235 P45) (1x piece) - SPMR 120304 / SPMR 421 (425- P25) (1x piece) - TNMG 16 04 08-61 - 415 P-K15 - (1x piece) Auction-ID: A1-48479-24258

Fork clamp with nose, DIN 6315 GN, slot width×whole length: 26X315mm >> Technical description >> --> Slot width: 26mm --> full length: 315 mm --> for tension screws: M24 --> Height: 40mm --> Width: 70mm --> Type: 6315GN --> Standard: DIN 6315 GN --> Product Type: Clamp -> Weight: 4.05kg per piece Auction-ID: A1-48483-96

Adapter Coromant Capto - CoroTurn SL ISO: C8-570-2C 40 081L Product data: - Machine direction adapter interface - Coromant Capto (bolt and segment clamping) -size C8 - Axial Run Adjustment - 40 - Code for coolant supply - 3: axial concentric and radial entry - Coolant leakage - 1: axial concentric exit - Coolant pressure - 70 bar - Mounting diameter - 80 mm - Pick-up diameter, workpiece side - 40 mm - Function length - 81 mm - Body diameter - 40 mm - Length body diameter - 81 mm - Torque - 17 Nm - Tool design - steel - Mass (weight) - 2.17 kg per piece Auction-ID: A1-48479-24114

Coromant Capto on cutter mandrel mount ISO: C8-391.05C-27 030M Product data: - Machine direction adapter interface - Coromant Capto (bolt and segmentclamping) -size C8 - Axial Run Adjustment - Arbor -ISO 6462 -A/B (center bolt/washer) -metric: 27 - Code for coolant supply - 3: axial concentric and radial entry - Coolant leakage - 4: axial concentric on circle - Coolant pressure - 80 bar - Functional diameter - 55 mm - Mounting diameter - 80 mm - Mounting diameter, workpiece side - 27 mm - Angular position mounting, workpiece side - 0 deg - Function length - 30 mm - Body diameter - 80 mm - Body diameter length - 30 mm - Torque - 80 Nm - Speed, max. (-81, -82: Maximum speed) - 14,000 rpm - Tool design - steel - Mass (weight) - 1.91 kg per piece Auction-ID: A1-48479-24096

Manufacturer: Siemens Spare part Item number: 6SN1118-0DH23-0AA1 Item Description: SIMODRIVE 611-D CONTROL PLUG-IN 2-AXIS PERFORMANCE CONTROL FOR DIGITAL DRIVE, VS+HS, WITH DIRECT MEASURING SYSTEM VOLTAGE SIGNALS Auction-ID: A1-48483-32

Changing gear set according to pictures Auction-ID: A1-48483-77

Coromant Capto on shrink chuck ISO: C8-391.19-25 100 Product data: - Machine direction adapter interface - Coromant Capto (bolt and segment clamping) -size C8 - Axial clamping adjustment - Cylindrical clamping (shrink fit) -metric: 25 - Code for coolant supply - 3: axial concentric and radial entry - Coolant leakage - 1: axial concentric on exit - Coolant pressure - 80 bar - Functional diameter - 55 mm - Mounting diameter - 80 mm - Pick-up diameter, workpiece side - 25 mm - Angular position mounting, workpiece side - 0 deg - Function length - 95 mm - Body diameter - 33 mm - Body diameter length - 56.5 mm - Speed, max. (-81, -82: Maximum speed) - 14,000 rpm - Tool design - steel - Mass (weight) - 2.5 kg per piece Auction-ID: A1-48479-24103

Adapter Coromant Capto - CoroTurn SL ISO: C8-570-40-LGM Product data: - Machine direction adapter interface - Coromant Capto (bolt and segment clamping) -size C8 - Axial running adjustment - SL (screw mounted) -straight -size 40 - Maximum cantilever length - 67 mm - Cutting direction - L - Code for coolant supply - 3: axial concentric and radial entry - Coolant leakage - 1: axial concentric exit - Coolant pressure - 150 bar - Mounting diameter - 80 mm - Pick-up diameter, workpiece side - 40 mm - Function length - 67 mm - Functional width - 20 mm - Functional height - 0 mm - Torque - 17 Nm - Tool design - steel - Mass (weight) - 2,209 kg per piece Auction-ID: A1-48479-24128

A package of indexable inserts LMT Fette + Kieninger is sold here. ! MINT CONDITION Sold here is a package = 1x packs = 10 pieces --> Brand LMT Greases, Indexable Inserts --> ISO code SNKX 1205 AN - 1052301 (LC240T) One package is sold here = 1x packs = 6 pieces --> Brand Kieninger, Indexable Inserts TP 10 G 05 25 03 (LC230T) Auction-ID: A1-48479-26014

Siemens 1 GG 5162-0KM46-6HU1-Z shunt motor, see nameplate used, normal signs of use, scope of delivery according to photos, Auction-ID: A1-48483-42

Adapter Coromant Capto - Cylindrical Shank ISO: C8-131-00098-25 Product data: - Machine direction adapter interface - Coromant Capto (bolt and segmentclamping) -size C8 - Axial clamping adjustment - Cylindrical clamping w/ flats (sleeve) -metric: 25 - Maximum cantilever length (OHN) - 98 mm - Maximum cantilever length (OHX) - 98 mm - Cutting direction - N - Code for coolant supply - 3: axial concentric and radial entry - Coolant leakage - 1: axial concentric exit - Coolant pressure - 80 bar - Mounting diameter - 25 mm - Holder diameter, workpiece side - 40.8 mm - Clamping length 57 mm - Function length - 98 mm - Functional width - 0 mm - Functional height - 0 mm - Body diameter - 63 mm - Torque 40 Nm - Tool design - steel - Mass (weight) - 3,425 kg per piece Auction-ID: A1-48479-24088

Face plate, face plate chuck, face launder chuck Pos. 1 --> Outer Ø: 400 mm --> Inner Ø: 160 mm --> Height: 100mm --> T-slots: 6 pieces Pos. 2 --> Outer Ø: 400 mm --> Inner Ø: 140 mm --> Height: 60mm --> T-slots: 3pcs, Pos. 3 --> Outer Ø: 300 mm --> Inner Ø: 100 mm --> Height: 94mm --> T-slots: 6 pieces Pos. 4 --> Outer Ø: 400 --> Inner Ø: 100 mm --> Height: 60mm --> T-slots: Auction-ID: A1-48483-85

Fork clamp beveled, DIN 6315 B, slot width×whole length: 24x315 mm >> Technical description >> --> Slot width: 24mm --> full length: 315 mm --> for tension screws: M22; M24 --> Height: 40mm --> Width: 64mm --> Type: 6315 B --> Product Type: Clamp -> Weight: 3.80kg per piece Auction-ID: A1-48483-98