takım tezgahları için aksesuarlar kullanılmış satılık (1,870)

: neu : ca. 12 Wochen ab Auftrags : Türkei : 12630 €: 242.5 €: 0.4 - 2 mm: 200 mm: 300 mm²: 63 mm: 150 m/min: 10 m/s²FESTO pneumatic systemSIEMENS servo drive and control system7’ colour touch screen SIEMENS2 feed rollersOption:Handwheel and Simlinx remote maintenance module € 4.290,--The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length in total:3000 mmweight of the machine ca.:600 kgdimensions of the machine ca.:5150 x 900 x 1250 mm

weight of the machine ca.:340 kgdimensions of the machine ca.:2470 x 700 x 1300 mm

: Minimat The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

external diameter: 420 mminternal diameter: 100 mmwidth: 5 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

voltage: 20-250 VAC VThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

liter capacity:21 l/minPressure of coolant:50 barrated current:20 AClean water tank capacity:300 ltotal power requirement:16 kWweight of the machine ca.:200 Kgdimensions of the machine ca.:1,2 x 0,8 x 1,4 mWe are importers for FRASCARA high pressure coolant systemsFrascara delivers compact, mobile and reliable high pressure coolant / filtering systems with 50 or 70 bar 21 l/min.We can provide up to 3 pressure levels controlled by M-Functions.Oil operated systems are available also.Areas of application:Cleaning of coolant lubricants, emulsions and cutting oils without filter residues. Installation on machine tools for individual machinesFunction:The lifting pump inside the machine tank with minimum 2bar / 20 l/min capacity presses the contaminated water through the twin filter unit into the clean water tank. of the Frascara unit, from where it is pumped back through the spindle by a 50 ba ...

diameter:310 mmweight of the machine ca.:0,03 tbore:65 mm

length:1200 mmwidth:500 mmheight:1260 mm

faceplate diameter:450 mmweight of the machine ca.:0,15 tdimensions of the machine ca.:0,5 x 0,5 x 0,2 mBore:130 mm

length:1750 mmwidth:1200 mmheight:2500 mmweight of the machine ca.:11 tTexte, Bilder, Grafiken, Layout, Strukturen und Algorithmen etc. unterliegen weltweitem Urheberrecht.Unerlaubte Verwendung der Daten, werden sowohl strafrechtlich als auch zivilrechtlich verfolgt.Das ausschließliche Urheber- / Nutzungsrecht dieser Daten wurde nachfolgender Person eingeräumt.Copyright © 2005-2024, Josef Weber. All rights reserved.

We are selling a new unused but defective tool magazine with tool changer for a Makino PS 95.The magazine body was broken in two parts with a crane hook during unloading of the machine from its transport box.Also some tool pots are damaged.Can be repaired or used as spare parts

faceplate diameter:620 mmweight of the machine ca.:0,15 tBore:130 mm

Tool holder type:Weldon 16 mm Tool holder shaft type:DIN 69880 E2-40 x 16 Shank diameter:40 mmlength:75 mm90° angle rotary tool holder BMT 40There are two units available. Both are like new and never used.External coolant up to 80 bar.

faceplate diameter:500 mmweight of the machine ca.:0,1 t4-jaw faceplate for studs and locknut

length:1500 mmwidth:1000 mmweight of the machine ca.:0,2 tdimensions of the machine ca.:1,5 x 1 x 0,8 mSurface plate / Welding bench with underframeTexte, Bilder, Grafiken, Layout, Strukturen und Algorithmen etc. unterliegen weltweitem Urheberrecht.Unerlaubte Verwendung der Daten, werden sowohl strafrechtlich als auch zivilrechtlich verfolgt.Das ausschließliche Urheber- / Nutzungsrecht dieser Daten wurde nachfolgender Person eingeräumt.Copyright © 2005-2024, Josef Weber. All rights reserved.

bar material dia.:15-65 mmbar length:3200 mmChannel sizes:15-65 mmweight of the machine ca.:2,2 tdimensions of the machine ca.:4,4 x 1,1 x 1,7 mThis TOP Automazioni X-Files 365 M bar loader magazine was rebuilt by TOP Automazioni in Italy in 2016 and has worked max. 10 hrs since then.It is in excellent condition and currently installed at a DMG Mori NLX 2000 SY.Fully automated bar loader magazine for machines with a maximum bar capacity of 65 mm with automatically changeable diameter for bars from 15 to 65 mm.No change of channels and pushers anymore, no spindle reduction tubes necessary.Loader is programmable in mm increments.

size of pallet:400x400 mmnumbers of pallets:15 table load:400 kgweight of the machine ca.:0,060 tdimensions of the machine ca.:0,4 x 0,4 m15 pallets for Makino A 55, size 400 x 400 with T-slots for sale

swing diameter:175 mmcentre height:255 mmbed width:190 mmweight of the machine ca.:0,1 tdimensions of the machine ca.:450 x 130 x 500 mm

swing diameter:140 mmbed width:255 mmcentre height:320 mmweight of the machine ca.:0,1 tdimensions of the machine ca.:510 x 140 x 610 mm

swing diameter:160 mmcentre height:300 mmbed width:280 mmweight of the machine ca.:0,1 tdimensions of the machine ca.:610 x 100 x 650 mm

stone measuring plate 400 x 400 x 50 mm ( 3 pieces available / price per piece )

throat:580 mmtool adaptor:drm. 130 weight of the machine ca.:0,1 tdimensions of the machine ca.:0,4 x 0,4 x 0,58 mused spindle support bearing for spindle diameter 130 mmTexte, Bilder, Grafiken, Layout, Strukturen und Algorithmen etc. unterliegen weltweitem Urheberrecht.Unerlaubte Verwendung der Daten, werden sowohl strafrechtlich als auch zivilrechtlich verfolgt.Das ausschließliche Urheber- / Nutzungsrecht dieser Daten wurde nachfolgender Person eingeräumt.Copyright © 2005-2024, Josef Weber. All rights reserved.

length:600 mmwidth:500 mmweight of the machine ca.:0,05 tdimensions of the machine ca.:1,5 x 1 x 0,8 mTexte, Bilder, Grafiken, Layout, Strukturen und Algorithmen etc. unterliegen weltweitem Urheberrecht.Unerlaubte Verwendung der Daten, werden sowohl strafrechtlich als auch zivilrechtlich verfolgt.Das ausschließliche Urheber- / Nutzungsrecht dieser Daten wurde nachfolgender Person eingeräumt.Copyright © 2005-2024, Josef Weber. All rights reserved.

length:1000 mmwidth:800 mmweight of the machine ca.:0,7 tdimensions of the machine ca.:1,0 x 0,8 x 1,4 mHardstone measuring plate complete with FISCHER tailstocks and 4 leveling elements.

length:720 mmwidth:780 mmheight:1050 mmWeight:150 kgTexte, Bilder, Grafiken, Layout, Strukturen und Algorithmen etc. unterliegen weltweitem Urheberrecht.Unerlaubte Verwendung der Daten, werden sowohl strafrechtlich als auch zivilrechtlich verfolgt.Das ausschließliche Urheber- / Nutzungsrecht dieser Daten wurde nachfolgender Person eingeräumt.Copyright © 2005-2024, Josef Weber. All rights reserved.

tool taper: 40 shaft cross cut:40 appr. 40 pieces axial driven tool taper with various cuttersUsed with Gildemeister GDM CNC latheSale as complete package or single, min. 5 piecesPrice offered for complete package

tool taper:50 weight:0,04 t

diameter:500 mmtool adaptor:50 Weight:12 kgface movement each head:82 mmfeeds:0,06 mm/U