taşlama makineleri kullanılmış satılık (2,281)

Weight: approx. 18 tgrinding length: approx. 4.10 m longBed: 7300 mm longincluding: segment grinding head, the original grinding spindle has already been ground over, the plain bearing has to be adjusted, a butt head is supplied to process the bending beams. Auction-ID: A7-48614-19

Max. pressure 125 Psi, 10 W power supply, NEVER USED. Overall dimensions: 900 x 600 x 1500 mm Weight: 50 kg Auction-ID: A7-48621-297

: neu : ca. 6 Monate ab Auftragse : Taiwan : 122570 €: 2316.57 €: 600 mm: 500 mm: 600 mm: 325 mm: 600 mm: 205 kg: 450 mm: 500 - 2200 1/min: 5,5 kW: 19 kW: 2800 mm: 2800 mm: 2610 mm: 2850 x 2000 x 2470 mm: 3500 kg: 820 mm: Dm. 355 x 38 x Dm. 127 mm: 0,001 mm: 1.7 kW: 2.4 kW: 10 - 150 1/min: 0.005 mm: 0.003 mmiSurface control with 10,4", touchscreen for fully automatic grindingin machine manual wheel balancingtraveling column rib structureAC servo motors für Y/Z axes and rotary table1 pc. wheel flange1 pc. grinding wheel Dm. 355 x 38 x Dm. 127 mmCoolant equipment with automatic paper filter and magnetic separatorautomatic dresser on the table, with compensationfully enclosed splash guardelectromagnetic round chuck, fine pole pitch (1+3 mm)working lampwarning lampoperating manual in German and EnglishALTERNATIVE:model version FRG-600S with Smart iControl for profile grinding morepr ...

Functions: Grinding machine for grinding chip splittersSaw blades: Diameter from approx. 20 to 400 mm, including 1 x mobile air compressor 85 cm long and a spare machine for cannibalization. Auction-ID: A7-48614-10

Saw blade diameter: minimal. 80 mm up to a maximum of . 710 mm Tooth Pitch: 3 mm to 25 mmMaximum. Saw blade thickness: approx. 6.5 mmWorking speed: infinitely adjustableGrinding wheel diameter: 200 mm Working speed: infinitely adjustable, usually between 10 and 45 teethWeight: approx. 600 to 1200 kg. Automatic chamfering of both bevels in one rotation Auction-ID: A7-48614-7

Circular saw blade diameter from 80-710 mm, including accessories and cladding. Auction-ID: A7-48614-34

Auction-ID: A7-48614-30

Max. pressure 125 Psi, 10 W power supply, NEVER USED. Overall dimensions: 900 x 600 x 1500 mm Weight: 50 kg Auction-ID: A7-48622-297

Max. pressure 125 Psi, 10 W power supply, NEVER USED. Overall dimensions: 900 x 600 x 1500 mm Weight: 50 kg Auction-ID: A7-48621-67

Max. grinding wheel diameter: approx. 100 mm Auction-ID: A7-48624-12

Auction-ID: A7-48614-33

Saw blade capacity: Diameter up to 1020 mmTooth pitch: Up to 42 mmGrinding wheel Ø: Up to 250 mm Maximum. Saw Blade Thickness: Up to 10mmPower Supply: 400V, 3~(Three-Phase), 50Hz. Auction-ID: A7-48614-1

Weight, approx. 1200 kg Auction-ID: A7-48614-28

Used, the X axis is out of serviceNote: Due to the size of the machine, it is recommended to inspect the machineDisassembly and loading by buyer, disassembly possible by seller upon requestTransport dimension: approx. 5.50 x 3.20 x 3 m (L/W/H), the head section and side panels can be disassembled. Auction-ID: A7-48614-16

Max. sanding belt width: 120 mm Auction-ID: A7-48624-4

Serial number: 95-8157Max. grinding wheel diameter: 100 mm Auction-ID: A7-48624-11

: neu : ca. 2 - 4 Wochen ab Auftr : Niederlande : 7733 €: 149.25 €: 1 : 150 x 2.000 mm: 20 - 114,3 mm: 1 : 1 : 4 kW: 270 kgThe new AL150HS 2 in 1 machine: grinding belt and pipe grinder. High Speed Belt thanks to a unique transmission, up to 150ft/per second.The Benefits of the AL150HS: less dust/particules, less change of colour and longer belt life (2 to 3 times) due to high speed. The AL150HS can be operated with two hand-wheels or a lever. The machine is equipped with both options.The AL150HS can be used to grind material from Ø 20 mm tot Ø 114.3 mm. The compound slide and carriage with rotatable clamp are continually adjustable, which means the machine can grind all pipe sections at every required angle between 30° and 90°.The ALMI AL150HS can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitable for all customary types of mate ...

: neu : 2024 : 5549 : prompt, Zwischenverkauf v : Taiwan : 63830 €: 1206.39 €: 1 : 1 : 610 mm: 610 mm: 600 x 300 mm: 300 x 600 mm: 650 mm: 700 mm: 5 - 25 m/min: 0 - 2,250 mm/min: 3 - 32 (0,001) mm: 320 mm: 5,5 kW kW: 0.74 kW: 1 kW: 1 kW: 2950 mm: 1490 mm: 2080 mm: 2200 kg: 355 x 50 x 127 mm: 1.450 U/min: 0,001 mm10.4", graphic NC control on a swivel arm with touchscreen for:Operating mode selectionCycle selection and program creationSurface grindingCross grindingPlunge grindingDressing with automatic compensationSemi-automatic balancing in the machineAutomatic spindle speed for constant surface speedSpindle load visualizationUnbalance controlGraphical status monitoringAlarm listaut. vertical feedservo drive for grinding wheel feed and table cross feedhardened slide ways in all 3 axes with needle rollerselectro-magnetic chuckcoolant equiptment with aut. paper filter and magnetic s ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 197430 €: 3731.43 €: 1010 mm: 590 mm: 1000 x 400 mm: 1000 x 400 mm: 0 -25 m/min: 0 - 4000 mm/min: 0,001 mm: 450 mm: 450 mm: 0 - 3800 mm/min: 0.001 mm: 600 - 3600 1/min: 11 kW: 3675 mm: 4055 mm: 2480 mm: 6500 kg: 423 kg: 670 kg: 405 x 50 x 127 mm: 2,4 / 3,9 kW: 5.9 kW: 0,005 mm: 0,003 mmRigid machine construction with a movable columnfor effective stability to ensure high grinding performance and machining accuracySmart iControlIV control with 15", touchscreen with electronic wired handwheelPC-based control with graphical dialog programming or G-code programmingInfinitely variable speedSurface grinding cycle, cross grinding cycle, plunge grinding cycle, multi-groove grinding cycle, contour grinding cycle, dressing cycleSpindle with 6 angular contact ball bearings (4 front and 2 rear)All 3 axes with precision ball screws and AC servo mot ...

: gebraucht : 2006 : 5539 : prompt, Zwischenverkauf v : Taiwan : 55100 €: 1 : 49600 €: 1000 mm: 850 mm: 1000 x 610 mm: 1000 x 600 mm: 1000 mm: 5 - 25 m/min: 1250 mm/min: 3 - 32 (0,02) mm: 690 mm: max. 400 mm/min mm: 400 mm/min: 0.001 mm: 1450 1/min: 11 kW: 3.7 kW: 0.37 kW: 20,6 kW: 3700 mm: 4000 mm: 3250 mm: 4800 x 2830 x 2800 mm: 7400 kg: 1500 kg: 1120 kg: 1500 kg: 355 x 75 x 127 mmServo drive for grinding wheel feed, hardened and grounded slide waysGrinding wheel spindle on 6 high precision angular contact bearingsElectro-magnetic chuckCoolant equiptment with aut. paper filter and magnetic separatorOver the wheel automatic dressing device (with automatic compensation)Grinding wheel withgrinding wheel flangemachine lampMachine and equipment according to the CE-regulationsUser manual in ENGLISHNEW GRINDING SPINDLE, SPINDLE BEARINGS AND GRINDING WHEELThe data for this ad was created w ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 73990 €: 1398.41 €: 610 mm: 600 mm: 600 x 300 mm: 600 x 300 mm: 420 kg: 700 mm: 5 - 25 m/min: 0 - 2.250 mm/min: 0,001 - 32 mm: 350 mm: 440 mm: 0 - 675 mm/min: 0.001 - 0.04 mm: 500 - 2000 1/min: 5,5 kW: 0.75 kW: 1.1 kW: 1.1 kW: 2710 mm: 2428 mm: 2200 mm: 3500 kg: 975 mm: 355 x 50 x 127 mm10,4", grafic NC-control on swiveling arm with touch screen for:- seletion of working mode, program creation, graphic condition control, alarm listaut. vertical feedservo drive for grinding wheel feed and table cross feedhardened slide ways in all 3 axes with needle rollerselectro-magnetic chuckcoolant equiptment with aut. paper filter and magnetic separatorautom. dressing attachment table mounted with compensation fully enclosed splash guard protection of working areagrinding wheelgrinding wheel flangegrinding wheel balancing scalebalance arborLED mach ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 247810 €: 2100 mm: 850 mm: 2000 x 600 mm: 2x 1000 x 600 mm: 0 - 20 m/min: 0 - 5000 mm/min: 0,001 mm: 685 mm: 0 - 2000 mm/min: 0.001 mm: 675 mm: 500 - 2200 1/min: 11 kW: 7710 mm: 3320 mm: 2850 mm: 6530x3200x3350 mm brutto mm: 10200 kg: 900 mm: 1240 kg: 2000 kg: 405 x 50 x 127 mm: 3,1 / 3,1 kW: 7.5 kW: X: 0,008, Y/Z: 0,005 mm: X: 0,006, Y/Z: 0,003 mmSmart i control with 10.4", touchscreen on a swiveling panel, with electronic wired handwheel- RS232, USB I/O connection- SMART Grind Cam (dxf transfer in G code)-PC based control with graphical dialog programming or G-code programmingInfinitely variable speedSurface grinding cycle, cross grinding cycle, plunge grinding cycle, multiple groove grinding cycle, contour grinding cycle, dressing cycleSpindle with 6 angular contact ball bearings (P4, class 7)Longitudinal guides with double-V-shape w ...

Dimensions (L/W/H): 2450x820x1380 mmWeight: 1500 kgTotal power requirement: 2,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1500x700x1600 mmWeight: 900 kgTotal power requirement: 0 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1700x900x1350 mmWeight: 300 kgTotal power requirement: 1,6 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1500x700x1600 mmWeight: 900 kgTotal power requirement: 1,6 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2450x820x1380 mmWeight: 1500 kgTotal power requirement: 2,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 2 - 4 Wochen ab Auftr : Deutschland : 1896.69 €: 200 x 32 x 32 mm: 1 kW: 2550 1/min: 42 mm: 270 mm: 470 mm: 1050 mm: 600x800x1350 mm: 60 kgQuiet running, maintenance-free motorLaterally closed protective hoodsStable, adjustable workpiece supportsHigh safety comfort due to adjustable spark deflectorsSuitable for grinding, deburring and sharpening all kinds of tools, metal profiles, etc.Motor circuit breaker and undervoltage releaseSpark/eye protection on both sidesConnection cable with CEE plug 16 A1 grinding wheel each coarse and fine12 months warranty for single shift operationArt.Nr.: 317.774with machine stand, emergency stop pushbutton and brakeOPTION (price on request):Footpedal as emergency stopALTERNATIV MODELS:Art.Nr.: 317.762 table versionArt.Nr.: 317.777 with machine stand with integrated suction, emergency stop pushbutton and brakeThe data for this ad was created  ...

GER RS-500 Surface Grinding Machine Type: Surface grinding machine Manufacturer: GER Model: RS-500 Serial number: 85/26 Magnetic fixture plate size: 200-500 mm Longitudinal travel: 500 mm Transversal travel: 400 mm Vertical travel: 400 mm Grindstone: 250 mm Approx. machine weight: 2500 kg Approx. dimensions (L x W x H): 2000 x 1650 x 2260 mm Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-48274-20

Tire size: 75 x 2000 mm Belt speed 30/34m per sec. ! Please note Drive wheel defective repair costs approx. € 250.00 Auction-ID: A1-47350-264