sac levha çalışması kullanılmış satılık (3,366)

Auction-ID: A1-48648-42

equipped with extraction Auction-ID: A1-49000-126

9 drawers filled Auction-ID: A1-49000-17

: neu : ca. 12 - 14 Wochen ab Auf : Italien : 74000 €: 1398.6 €: 1350 mm: 0,5 - 170 mm: 1370 x 2200 mm: 4000 m³/h: 200 mm: 6 bar: 78 (+/-2) dB: 1750 mm: 2100 mm: 2180 mm: 2000 kgWITH 2 WORKING STATIONS: 1 X GRINDING BELT UND 1 X BRUSH UNIT ON TOPMachine made of stress-free welded steel construction for stable and rigid structure.Work table with motorised height adjustment via 4 synchronised spindles.Independent drive motors for each work group.Bonnets for extraction inside the machine, one per station.Touch screen for-Automatic star-delta connection of the main motors- Analogue ammeter for each group- Digital display for sheet thickness with decimal point tolerance- Material thickness adjustment (+/- 0.1 mm)- Machine condition monitoring with alarm messagesFEEDING SYSTEMRobust steel structure, wear-resistant surface.Vacuum conveyor belt on requestVariable feed speed via frequency co ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 29000 €: 553.9 €: 2050 mm: 4 mm: 42 1/min: 750 mm: 7.5 kW: 800 mm: 450 mm: 2700 mm: 2300 mm: 1350 mm: 2800 kgmotorizedback gauge atrecirculating ballscrew with Control DT5hold down with rubber padsSide Lay with T-Slot2 Sheet support armsball in the tabletape measuretilting stoplight barriers on the back of the machinecutting line illuminationuser manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Italien : 153200 €: 2895.48 €: 1350 mm: 0,4 - 120 mm: 1370 x 2200 mm: 6000 m³/h: 150 mm: 6 bar: 4200 mm: 2300 mm: 2350 mm: 4200 kgWITH 2 WORKING STATIONS: 1 X GRINDING BELT UND 1 X BRUSH UNIT ON TOP Machine made of stress-free welded steel construction for stable and rigid structure Work table with motorised height adjustment via 4 synchronised spindles. Independent drive motors for each work group. Hoods for extraction inside the machine, one per station.Touch screen for: Automatic star-delta connection of the main motors Digital display for sheet thickness with decimal point tolerance Material thickness adjustment (+/- 0.1 mm) Machine condition monitoring with alarm messagesFEEDING SYSTEM Robust steel structure, wear-resistant surface. Vacuum conveyor belt on request The table raises and lowers from 780 mm to a maximum height of 950 m ...

: neu : ca. 2 - 4 Wochen ab Auftr : Niederlande : 5932 €: 114.49 €: 3/4 26,9 mm, 1 33,7 mm, mm: 5 mm: 3 mm: 93 kgThe motor driven AL 1-2U can be used to notch pipes with an external diameter of 27.9 mm 26.9 mm (3/4",), 33.7 mm (1",), 42.4 mm (1 1/4",), 48.3 mm (1 1/2",) and 60.3 mm (2",)and notch pipes with an external diameterof 22 mm to 76 mm for sink outflows.Do you often have to notch pipes? If so, the motor-driven AL1-2U equipped with a 2.2 kW electric motor is the ideal solution!The motor forms one unit with the special eccentric shaft that drives the notching tool. The motor is also equipped with an on/off switch with a zero voltage protection and guard.All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are readily available, ideal for double corner joints.The data for this ad was created  ...

: neu : ca. 2 - 4 Wochen ab Auftr : Niederlande : 879 €: 20 - 76,1 mm: 3 mm: 2.5 mm: 7 kgThe ALU can be used to notch a sink outflow in pipes with an external diameter of 22 mm to 76 mm.Since ALMI pipe notchers have a favourable price and high productivity they are an excellent investment.ALMI pipe notchers are available for cutting out venting slots in round and rectangular met pipes with an external diameter from 27 mm upwards and a wall thickness of a maximum of 3 mm.All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are immediately available.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 2 - 4 Wochen ab Auftr : Niederlande : 811 €: 3/4 26,9 mm, 1 33,7 mm, mm: 3 mm: 2.5 mm: 8 kgThe AL 1 can be used to notch pipes with an external diameter of 26.9 mm (3/4",), 33.7 mm (1",) and 42.4 mm (1 1/4",).The hand-operated machines can be easily wall mounted.With ALMI pipe notchers filing or milling pipes has become a thing of the past.The major benefit of this pipe notcher, compared to other notchers, is that one unit can be used to notch a series of diameters without needing to change parts for each diameter.All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are available immediately, ideal for double corner joints.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 2 - 4 Wochen ab Auftr : Niederlande : 1063 €: 1 1/4 42,4, 1 1/2 48,3 mm: 3 mm: 2.5 mm: 15 kgThe AL 3 can be used to notch pipes with an external diameter of 42.4 mm (1 1/4”) and Ø48.3 mm (1 1/2”).ALMI products are subjected to stringent quality control inspections before they leave the factory.ALMI’s pipe notcher, in contrast to punch-cutting machines with separate auxiliary tools, is always available for immediate use.Moreover, the price is more affordable than the auxiliary tools for punch-cutting machines.All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are available immediately, ideal for double corner joints.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 2 - 4 Wochen ab Auftr : Niederlande : 979 €: 1 1/2 48,3 mm, 2 60,3 m mm: 3 mm: 2.5 mm: 15 kgThe AL 2 can be used to notch pipes with an external diameter of 48.3 mm (1 1/2",) and 60.3 mm (2",).ALMI products are subjected to stringent quality control inspections before they leave the factory.ALMI’s pipe notcher, in contrast to punch-cutting machines with separate auxiliary tools, is always available for immediate use.Moreover, the price is more affordable than the auxiliary tools for punch-cutting machines.All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are available immediately, ideal for double corner joints.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

complete pallet. Stark pressure amplifier Record 099-340/804-412, including SK-40 tool holders and clamping components Auction-ID: A1-49000-18

with CNC control and programmable bending anglesControl voltage: 24 V-2.8 Atubes Outer diameter up to approx. 16 mm. Auction-ID: A7-49604-34

tube diameter: 406.4 - 1625.6 mmwall strength: 9 - 60 mmbending radius min.: - mmpressure: 10000 ttube: 8000 - 12000 / 16000 mmPlate thickness: 9 - 60 mmdistance between columns: mmcontrol: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe HYUNDAI-WIA JCO Press Bending Machine is a heavy-duty industrial hydraulic pressused to form large-diameter, longitudinally seam-welded (LSAW) steel pipes.Sequential Shaping: The machine bends a flat steel plate step-by-step into a pipe shape.It first presses the edges into a J shape, then curves them further into a C shape, and finally closes them into an O shape• Year of Modernization: 2025 1. Edge Milling Machine2. Pre Bending Machine3. In Feeder4. JCO Press Bending Machine5. Tack Welding Machne6. Insdie Welding Machine7. Outside Welding Machine8. 4-way (Inpending) Machine9. End Facing MachineThe data  ...

Digital stroke settings Foot pedal Auction-ID: A1-49309-65

Auction-ID: A1-49309-202

Machine ready for transport Auction-ID: A1-48649-1

with ELAP Jolly control Bibi -FCA 86, 1 x drive/pump unit CMO, 1 electric motor and separate electric motor with blower/extraction unit Auction-ID: A1-49723-22

Hydraulic bending machine 400 kg Auction-ID: A1-48648-41

work piece width: max 145 x 150 mmband speed: 1.0 - 8.0 m/minworkpiece height: max. 100 mmtotal power requirement: ca. 5.5 kWweight of the machine ca.: 900 kg.dimensions of the machine ca.: 1560 x 870 x 1920 mmWide-Band Sander for Deburring and Rounding of Laser-Cut Parts - Includes Vacuum Work Table Description Technical Specifications: - Working width: 150 mm- Maximum workpiece height: 100 mm- Max. height adjustment: 100 mm- Complete finishing in a single pass - 1 grinding wheel - 2 disc brushes- Pressure rollers in front of and behind each unit - Adjustable feed speed- Fixed table, constant feed height - Vacuum table- Pressure of the brushes and grinding wheels adjustable . without opening the hoodINCLUDED: DD UNIT: GRINDING WHEEL FOR DEBURRING - Working width: 150 mm- Motor power: 1.1 kW - Grinding wheel diameter: 250 mm INCLUDED: 2PTB UNIT: DISC BRUSHES FOR EDGE ROUNDING - Unit  ...

Machine ready for transport Auction-ID: A1-48649-8

Tube bending machine including molds Capacity up to 1 ton Auction-ID: A3-46152-19418

Joint/punching tool machining and sharpening machine, with Lenze DISCO variable speed drive, 0.37 kW, variable speed. Auction-ID: A1-49723-20

Auction-ID: A1-49309-3

Specifications: model B-500, 230 V, 1,400 W, 6.5 A, 950 rpm, 50/60 Hz. Auction-ID: A1-41279-420

equipped with 5x hydraulic jack; including hydraulic unit; foot control; mounted on profile steel frame; bending table size 1100x900x1100 mm; transport dimensions approximately 1600x900x1300 mm; Auction-ID: A1-49001-20

Includes various accessories. Auction-ID: A1-41279-408

mounted on profile steel frame; including hydraulic unit; including accessories; Auction-ID: A1-49001-51

Extension: 580mm, including punching tools Auction-ID: A1-49001-12

Includes various accessories. Auction-ID: A1-41279-418