sac levha çalışması kullanılmış satılık (3,284)

Bir Darley CNC abkant pres mevcuttur. Baskı kuvveti: 2000kN, çalışma genişliği: 5200mm, güç: 15kW, yağ kapasitesi: 160l, makine boyutları X / Y / Z: yaklaşık 5500mm / 1900mm / 3100mm, ağırlık: yaklaşık 20000kg. Araçlar ve aksesuarlar dahil. Belgeler mevcut. Yerinde inceleme mümkündür.

A Finn-Power CNC punching press is available. Press force: 300kN, max. workpiece width: 4061mm, max. workpiece length: 1528mm, max. workpiece thickness: 8mm, max. workpiece weight: 200kg, quick chuck X/Y: 80m/min/60m/min. Turret head positions: 20, turret head speed: 30rpm, tool type: thick turret, max. tool diameter: 89mm. Travel speed: 100m/min, drilling accuracy: 0.1mm, positioning accuracy: 0.08mm, oil tank capacity: 330l, max. operating pressure: 300bar. Machine dimensions X/Y/Z: approx. 5900mm/6300mm/2500mm, weight: approx. 13500kg, control: Siemens Sinumerik 840D. The table of the machine has been extended. Without machine housing. Documentation available. On-site inspection is possible.

Bir Drinns volan eksantrik delme makinesi mevcuttur. Baskı kuvveti: 250kN, ram tablası mesafesi: 230mm, strok ayarı: 10mm-65mm, strok sayısı: 145 strok/dak, volan hızı: 145rpm, maks. alet ağırlığı: 190kg, makine ağırlığı: yaklaşık 2250kg. Belgeler mevcut. Yerinde inceleme mümkündür.

Sac metal boşlukları için boş bir döndürücü mevcuttur. Boş boyutlar X/Y: 1600mm/1100mm, boş yığın yüksekliği: 190mm, yığın ağırlığı: 1500kg, maks. yığın eğimi: 15, paletlerle çevrim süresi: yaklaşık 30s, makine boyutları X/Y/Z: yaklaşık 3500mm/2500mm/2500mm, ağırlık: yaklaşık 3000kg. Belgeler mevcut. Yerinde inceleme mümkündür.

Punching tool, punch, scraper, hold-down device-Handover: in current condition as seen-Bracket: Damage see photos-Scraper: hold-down device for punching-Receptacle: Ø26/22 x 210 mm-Dimensions: 315/125/H95 mm-Weight: 4.2 kg

Punching tool, punch, scraper, hold-down device-Scraper: hold-down device for punching-Holder: Ø22/25 x 215 mm-Dimensions: 315/65/H85 mm-Weight: 1.9 kg

Dijital uzunluk kesimli bir makaralı konveyör içeren bir sac katlama makinesi mevcuttur. Yerinde inceleme mümkündür.

A complete punching line with Helmerding eccentric press is available. 1) Eccentric press Helmerding KDH 100, year of manufacture: 1997, power: 11kW, pressing force 30° before and after: 100t, stroke adjustment: 8mm-110mm, ram adjustment: 80mm, stroke rate: 40-140 strokes/min, length: 2100mm, width: 1500mm, weight: approx. 12000kg. 2) Kohler 1000.1 reel, year of manufacture: 1983, power: 1kW, load capacity: 1000kg, length: 1500mm, width: 1100mm. 3) Straightener Kötje RM-7-300-60, year of manufacture: 1998, power: 3kW, max. strip width: 300mm, straightening roller diameter: 60mm, number of straightening rollers: 7, length: 1400mm, width: 1200mm. 4) Roller feed Kötje EWV 80-50-S, year of manufacture: 1998, power: 4kW, length: 750mm, width: 700mm. Documentation available. On-site inspection is possible.

Bir HMS delme makinesi mevcuttur. Baskı kuvveti: 250t, strok yüksekliği: 40mm, montaj yüksekliği: 450mm, ram ayarı: 20mm, strok hızı: 120 strok/dak, genel sistem boyutları X/Y/Z: yaklaşık 17000mm/8000mm/3500mm. Bobin ve şerit işleme dahil. Belgeler mevcut. Yerinde inceleme mümkündür. Eylül 2025'ten itibaren satışa sunulması bekleniyor.

Otomasyon da dahil olmak üzere bükme ve kesme için eksiksiz bir sac işleme merkezi mevcuttur. Belgeler mevcut. Yerinde inceleme mümkündür.

Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span width: 0 to 55 mm -Load capacity: 9000 kg -Number: 2x terminals available -Price: per piece -Weight: 28 kg/piece

Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel tongs, plate gripper, lifting claw, lifting clamp-Manufacturer: ip, safety lifting clamp type IPSUNZ 6t with swiveling support ring-Clamp range: 32-64 mm-Load capacity: 6 t-Number: 4x clamps available-Price per piece-Dimensions: 310/100/H420 mm-Weight: 24 kg/pc.

Bilinmeyen bir kusura sahip bir lazer kesme ve delme makinesi Trumpf (sırayla doğrusal amplifikatör) mevcuttur. Baskı kuvveti: 220kN, lazer gücü: 1500W (1.5kW), delme çapı: 76mm, maks.iş parçası boyutları X/Y: 2585mm/1280mm, maks. sac kalınlığı yumuşak çelik/paslanmaz çelik/alüminyum: 8mm/6mm/4mm, maks.iş parçası ağırlığı: 200kg, parça dağıtıcı X/Y: 500mm/500mm, magazin konumları: 18, makine boyutları X/Y/Z: yaklaşık 8000mm/7500mm/2400mm, ağırlık: yaklaşık 16000kg. Yerinde inceleme mümkündür.

Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span width: 0 to 50 mm -Load capacity: 9000 kg -Weight: 32 kg

An Amada CNC turret punching machine for medium format sheets including an MP300 M loading unit, Wilson X-Sharp grinding machine and numerous standard and special punching tools are available. 1) CNC turret punching machine Amada, year of manufacture: 2007, punching force: 300kN, max. sheet dimensions X/Y: 3000mm/1500mm, max. sheet thickness: 6.35mm, stroke rate: 600 strokes/min, simultaneous positioning speed: 128m/min, repeat accuracy: +/-0.1mm, machine dimensions X/Y/Z: approx. 5100mm/3200mm/2300mm, weight: approx. 18000kg. 2) Automatic sheet loading and unloading system Amada MP 300 M, max. sheet dimensions X/Y: 3000mm/1500mm, min. sheet dimensions X/Y: 1000mm/300mm, sheet thickness range: 0.8mm-6mm, max. load capacity per pallet: 3000kg, max. stacking height: 400mm, max. sheet weight: 170kg, max. pallets: 9, pallet change time: 25s, sheet loading time: 18s, weight: approx. 4900kg. 3 ...

Bending tool, die, upper knife, upper tool, straight tool-Tool: split, for press brake-Tool angle: 60°-Drawing: in the photos-Dimension: 25 x 165 mm-Length: 3562 mm (each 1 x 1818/800/387/190/122/85/60/55/45 mm)-Weight: 124 kg

Baskı kuvveti: 1200kN, çalışma genişliği: 4100mm, stand mesafesi: 3550mm, tabla genişliği: 215mm, boğaz derinliği: 400mm, strok: 800mm, çalışma hızı: 80mm/s, güç: 11kW, ağırlık: yaklaşık 12000kg. Dokumentation vorhanden. Yerinde inceleme mümkündür.

Eski bir GEKA (Georg Eckart) giyotin makası mevcuttur. Makinenin acil durdurması arızalı. Yerinde inceleme mümkündür.

Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel tongs, plate gripper, lifting claw, lifting clamp-Manufacturer: ip, safety lifting clamp type IPUZ with swiveling support ring-Clamping range: 0 - 25 mm-Load capacity: 3 t-Number: 1x terminals available-Price per piece-Dimensions: 230/90/H380 mm-Weight: 16 kg/pc.

Punching units, punching unit, punching bracket, punching tool, non-driven notching and shearing units, forming bracket-Handover: in the current condition as viewed-Punch bracket: as shown in the pictures-Manufacturer: CEWE-Type: PA14-150 2GN1 K27-Projection: 150 mm-Number: 2x punching unit available-Price: per piece-Dimensions: 250/45/H140 mm-Weight: 5.5 kg/piece

Die holder, cutting tool, punching tool, punch, punching die, punching punch, gill forming tool-Punching tool: for holding matrices-Bore diameter: 50 mm-Dimensions: 200/120/H80 mm-Weight: 5.6 kg

Die holder, cutting tool, punching tool, punch, punching die, punching punch, gill forming tool-Punching tool: die-Punching dimensions: 15 x 25 mm square-Dimensions: 115/115/H115 mm-Weight: 3.4 kg

Bending tool, die, upper knife, upper tool, straight tool-Tool: for press brake, 12 pieces-Tool angle: 28°-Dimensions: see the drawing in the photos-Dimension: 23 x 245mm-Length: 4386 mm / each 1 x 748/730/715/700/400/198/180/150/100/65 mm, 2x 200 mm-Weight: 175 kg

Punching units, punching unit, punching bracket, punching tool, non-driven notching and shearing units, forming bracket-Handover: in the current condition as viewed-Punch bracket: as shown in the pictures-Manufacturer: CEWE-Type: PA50-150-Projection: 150 mm-Dimensions: 275/80/H140 mm-Weight: 10.3 kg

Tool trolleys, workshop trolleys, mobile workshop trolleys, drawer cabinets, welding machine trolleys, machine trolleys-Width: 410 mm-Depth: 800 mm-Height: 1010 mm-Weight: 49 kg

Hand lever shears, long knife sheet metal and round steel shears, lever shears-Hand lever shears: sheet metal and round steel shears-Blade insert length: 300 mm-Round steel: up to approx. 17 mm-Total dimensions: 500/145/H1325 mm-Transport dimension: 1000/145/H450 mm-Weight: 38 kg

guillotine scissors cutting blades, replacement blades for guillotine scissors, replacement blades, cutting blades, scissor blades-Cutting knife. Replacement blades for table shears, 2 pieces-Cutting length: 2550 mm-Hole spacing: 125/200 mm / Ø10 mm see photos-Price/tax: complete-Total weight: 40 kg

container turning device, boiler turning device, welding turning device, welding turning device, welding device, welding turntable, welding turning device -Container turning device: welding turning device -Load capacity: 5000 kg -Drive motor: SEW Eurodrive 0.37 kW -Unrolling speed: 100 to 600 mm/min right/left rotation -Roller spacing: 270 - 960 mm, rollers Ø 230 x 159 mm -Transport dimensions: 1200/740/H745 mm / 870/430/H745 mm -Weight: 378 kg / 275 kg

Separating tool, punching tool, punch, punching die, punching die, gill forming tool-Manufacturer: Peddinghaus, punching tool scraper-Holes: Ø 13 mm-Threaded hole: M15-Dimensions: 150/100/55 mm-Weight: 1.8 kg

2 column punching tool, separating tool, punching tool, punch, punching die, punching stamp, column frame-Punching tool: 2 columns, Ø 10/14/10 mm-Punching dimensions: see photo with dimensions-Dimensions: 265/105/H150 mm-Weight: 11.7 kg